Transcript
JAR TOP VALVE DIAPHRAGM DIAFRAGMA DE VÁLVULA CON TAPA ROSCADA Instructions: 1. Remove valve bonnet. Do not lose solenoid spring and plunger. (If separated from solenoid, reinstall plunger with pointed end up.) 2. Remove diaphragm spring. 3. Replace diaphragm. 4. Reassemble valve. Instrucciones: 1. Retire la tapa. No afloje el muelle ni el émbolo del solenoide. (Si se separa del solenoide, vuelva a instalar el émbolo con el extremo puntiagudo hacia arriba.) 2. Retire el muelle del diafragma. 3. Cambie el diafragma. 4. Vuelva a montar la válvula. © 2010 The Toro Company 8111 Lyndale Avenue South Bloomington, Minnesota 55420 Part No. 118-1213 53804 Jar Top Valve Diaphragm Clamshell Label Back File: 53804_JTDiaphragm_03Back.ai A Visual Marketing Design Office TORO Underground Packaging Program JOB# 718.910 21Oct10 PROCESS K