Download Snapper CICFR5505HV User's Manual

Parts Manual for
INTERMEDIATE
REAR TINE TILLERS
SERIES 3, 4 & 5
MODEL
CICFR5505HV
EICFR5004B
EICFR5004B
EICFR5505BV
ICFR5004B
ICFR5505BV
ICFR7005BV
IR5003B
NIR5003B
McDonough, GA, 30253 U.S.A.
COPYRIGHT © 2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Manual No.
Revision 9,
2/28/2006
7006047
TP 400-5172-9-RT-N
Table Of Contents
PAGE
4
6
10
14
16
20
22
24
26
28
30
32
GROUP
HANDLES, CONTROLS, WEIGHTS
MAIN CASE/GEARS (Series 3)
MAIN CASE/GEARS (Series 4&5)
TILLER HEAD COMPONENTS
SHIFT & DRIVE COMPONENTS
WHEELS, TIRES, RIMS
DECALS
DECALS (continued)
DECALS (continued)
DECALS (continued)
CULTIVATOR SHIELD KIT
HILLER - FURROWER KIT
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
3
7006047
TP 400-5172-9-RT-N
HANDLES, CONTROLS, WEIGHTS
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
4
SERIES 3, 4 & 5
HANDLES, CONTROLS, WEIGHTS
Item Part No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
7018808
7091575
7015252
7091601
7091681
7034746
7036170
7014681
7014682
7032593
7018787
7091540
7090831
7090361
7038221
7091612
7090861
7091303
7036171
7035107
7011791
7038223
7032496
7091076
7061794
Qty
1
5
1
12
7
1
1
2
1
1
1
4
1
12
1
4
4
3
1
1
1
7
2
16
1
Description
Note
CABLE Clutch
NUT, 5/16-18 Hex Center Lock
SPRING, Tine
NUT, 5/16-18 Hex Flange Lock
BOLT, 5/16-18 x 1” Hex Flange Lock
BAR, Handle IRT
PANEL, Tiller Dash
BUSHING
COVER, Cable
CATCH, Bail
BAIL
SCREW, 5/16-18 x 1-1/2” Hex Head Cap GR5
SCREW, 5/16-18 x 2-3/4” Hex Head Cap GR5
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
SUPPORT, Handle
BOLT, 5/16-18 x 1-1/2” Sq. Neck Carriage GR5
BOLT, 5/16-18 x 1-3/4” Sq. Neck Carriage GR5
BOLT, 5/16-18 x 3/4” Square Neck Carriage GR5
BAR, Stand-Up
BOX, Weight
RETAINER, 5/16” Bolt (Black)
WEIGHT, Steel
BRACKET, Weight
WASHER, 5/16” Flat
BAG, Hardware - IR5003B
Was 91067
Was 91070
Was 91066
Was 90582
Was 91072
not used on ICFR5004B
Contains 2 each of P/N's 28725
and 91606 (see Tiller Head
Component Page)
Footnotes:
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
5
7006047
TP 400-5172-9-RT-N
MAIN CASE/GEARS (Series 3)
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
6
SERIES 3, 4 & 5
MAIN CASE/GEARS (Series 3)
Item Part No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
7061821
7034681
7034682
7034677
7015597
7091681
7015598
7028672
7028753
7045130
7021977
7022512
7046604
7023252
7014469
7015405
7015679
7015313
7015409
7015350
7010756
7023849
7028717
7015136
7015319
7040609
7015347
7015318
7015348
7018790
7045127
7053826
7054412
7042764
7051653
7015342
7015343
Qty
1
1
2
1
7
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
3
1
1
1
1
1
1
Description
Note
ASSEMBLY, Case, Complete (Series 3)
CASE HALF, Left Hand
CASE HALF, Right Hand
REINFORCEMENT, Case
CLAMP, Speedy
BOLT, 5/16-18 x 1” Hex Flange Lock
SEAL, Cap
SPACER, Tine Shaft (Short)
GASKET, Main Case IR5003B Tiller
SPACER, Main Shaft (.64” long)
PIN, Guide
SHAFT, Main Detent (4 Position)
FORK, Primary Shaft
SPRING, Compression
BALL, Detent
CRANK, Shift
GASKET, Shift Arm Pivot
PIVOT, Shift Arm
PLUG, 1/2” Button
O-RING
BEARING, .625 x 1.37 x .435
SHAFT, Input
PINION, Input
SEAL, Oil
BEARING, Axle
WELDMENT, Axle (#40/34T)
CHAIN, Traction #40
SPACER, Wheel Shaft (.686” Thick)
SPACER, 5/8 x 1.11”
GEAR & SPROCKET
SHAFT, Gear
* ASSY, Tine Drive Gear, #50, Sprkt 10T, Gear 34T
* ASSEMBLY, Wheel Drive Gear
SPACER, Reverse (2.567” Long)
* ASSEMBLY, Reverse Idler
SEAL, Oil
O-RING
service kit
Was 14500
Footnotes:
NOTE: * Part # 15339 DX Bearings are included, if purchased separately they must be pressed in.
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
7
7006047
TP 400-5172-9-RT-N
MAIN CASE/GEARS (Series 3)
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
8
SERIES 3, 4 & 5
MAIN CASE/GEARS (Series 3)
Item Part No
37
38
39
40
41
42
43
44
45
46
47
49
48
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
7018869
7029890
7041726
7028476
7091513
7011791
7091076
7091690
7091297
7090053
7090095
7011024
7091946
7090873
7090460
7091601
7091584
7090953
7020938
7090072
7091122
7091819
7023514
7038647
7038648
7034680
7061174
7033962
7033531
7090606
Qty
1
1
1
1
4
1
16
4
4
4
4
1
21
3
3
8
6
3
1
12
1
3
1
1
1
1
1
1
3
4
Description
Note
BEARING, Tine Shaft
SPACER, Tine Shaft Long
WELDMENT, Tine Shaft (#50/18T)
CHAIN, Tine (Endless Roller) #50
SCREW, 5/16-24 x 1-3/4” Hex Head Cap GR5
RETAINER, 5/16” Bolt (Black)
WASHER, 5/16” Flat
WASHER, 5/16” Split Lock
NUT, 5/16-24 Hex
WASHER, 1/4” Internal Tooth Lock
NUT, 1/4-20 Hex
PLUG
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
WASHER, 7/16” Internal Tooth Lock
NUT, 7/16-20 Hex
NUT, 5/16-18 Hex Flange Lock
NUT, 1/4-20 Hex Flange Lock
SHIM-WASHER
SHIM WASHER, 5/8”
SCREW, 1/4-20 x 5/8” Hex Head Cap GR5
SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
O-RING, #012
REINFORCEMENT, R.H. Frame
REINFORCEMENT, L.H. Frame
BRACE, Belt Cover
SIDE PLATE
BRACKET, Belt Cover- IRT
WASHER, Shim
BOLT, 5/16-18 x 5/8” Hex Flange Lock
Was 91689
Was 91692
Was 91023
Was 91024
Was 91070
Was 91065
Was 79405
Was 90539
Was 90362
Was 33415
Was 91510
Footnotes:
NOTE: * Part # 15339 DX Bearings are included, if purchased separately they must be pressed in.
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
9
7006047
TP 400-5172-9-RT-N
MAIN CASE/GEARS (Series 4&5)
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
10
SERIES 3, 4 & 5
MAIN CASE/GEARS (Series 4&5)
Item Part No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
7057824
7034681
7034682
7034677
7015597
7091681
7015598
7028672
7028753
7046787
7021977
7046786
7046604
7023252
7014469
7015405
7015679
7015313
7015409
7015350
7010756
7023849
7046785
7015136
7015319
7040609
7015347
7015318
7015348
7018790
7045127
7057823
7054412
7046791
7051653
7015342
7015343
Qty
1
1
1
2
1
7
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
3
1
1
1
1
1
1
Description
Note
ASSEMBLY, Tiller Case
CASE HALF, Left Hand
CASE HALF, Right Hand
REINFORCEMENT, Case
CLAMP, Speedy
BOLT, 5/16-18 x 1” Hex Flange Lock
SEAL, Cap
SPACER, Tine Shaft (Short)
GASKET, Main Case IR5003B Tiller
SPACER, Main Shaft (.47” long)
PIN, Guide
SHAFT, Main Detent (5 Position) ICFR
FORK, Primary Shaft
SPRING, Compression
BALL, Detent
CRANK, Shift
GASKET, Shift Arm Pivot
PIVOT, Shift Arm
PLUG, 1/2” Button
O-RING
BEARING, .625 x 1.37 x .435
SHAFT, Input
PINION, Input ICFR
SEAL, Oil
BEARING, Axle
WELDMENT, Axle (#40/34T)
CHAIN, Traction #40
SPACER, Wheel Shaft (.686” Thick)
SPACER, 5/8 x 1.11”
GEAR & SPROCKET
SHAFT, Gear
* ASSY, F&R Tine Drive Gear #50, Spkt 10T Gear 34T
* ASSEMBLY, Wheel Drive Gear
SPACER, Reverse Idler (1.245” long)
* ASSEMBLY, Reverse Idler
SEAL, Oil
O-RING
Was 14500
Footnotes:
NOTE: * Part # 15339 DX Bearings are included, if purchased separately they must be pressed in.
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
11
7006047
TP 400-5172-9-RT-N
MAIN CASE/GEARS (Series 4&5)
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
12
SERIES 3, 4 & 5
MAIN CASE/GEARS (Series 4&5)
Item Part No
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
7018869
7029890
7041726
7028476
7091513
7011791
7091076
7091690
7091297
7090053
7090095
7091946
7011024
7090873
7090460
7091601
7091584
7090953
7020938
7090072
7091122
7091819
7023514
7038647
7038648
7034680
7061174
7033962
7033531
7058469
7090606
7072801
Qty
1
1
1
1
4
1
16
4
4
4
4
21
1
3
3
8
6
3
1
12
1
3
1
1
1
1
1
1
3
1
4
1
Description
Note
BEARING, Tine Shaft
SPACER, Tine Shaft Long
WELDMENT, Tine Shaft (#50/18T)
CHAIN, Tine (Endless Roller) #50
SCREW, 5/16-24 x 1-3/4” Hex Head Cap GR5
RETAINER, 5/16” Bolt (Black)
WASHER, 5/16” Flat
WASHER, 5/16” Split Lock
NUT, 5/16-24 Hex
WASHER, 1/4” Internal Tooth Lock
NUT, 1/4-20 Hex
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
PLUG
WASHER, 7/16” Internal Tooth Lock
NUT, 7/16-20 Hex
NUT, 5/16-18 Hex Flange Lock
NUT, 1/4-20 Hex Flange Lock
SHIM-WASHER
SHIM WASHER, 5/8”
SCREW, 1/4-20 x 5/8” Hex Head Cap GR5
SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
O-RING, #012
REINFORCEMENT, R.H. Frame
REINFORCEMENT, L.H. Frame
BRACE, Belt Cover
SIDE PLATE
BRACKET, Belt Cover- IRT
WASHER, Shim
* ASSY, Gear 16T (Incl. two 15339 DX Bearings)
BOLT, 5/16-18 x 5/8” Hex Flange Lock
WASHER, Shim .63 x 1.24 x .05
Was 91689
Was 91692
Was 91023
Was 91024
Was 91070
Was 91065
Was 79405
Was 90539
Was 90362
Was 33415
Was 91510
Footnotes:
NOTE: * Part # 15339 DX Bearings are included, if purchased separately they must be pressed in.
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
13
7006047
TP 400-5172-9-RT-N
TILLER HEAD COMPONENTS
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
14
SERIES 3, 4 & 5
TILLER HEAD COMPONENTS
Item Part No
Qty
Description
Note
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
7032553
7091601
7091681
7034745
7034684
7091602
7034756
7090361
7032494
7091020
7032536
7091584
7036168
7075157
7028725
7091606
7075158
7038235
7091604
7034683
7090595
7038272
7090290
7034755
7034757
7091841
7057831
1
7
2
2
1
2
1
8
1
2
2
6
1
1
2
2
1
1
4
2
4
2
3
1
1
2
HANDLE, Depth Bar
NUT, 5/16-18 Hex Flange Lock
BOLT, 5/16-18 x 1” Hex Flange Lock
COVER, Side Tine IR5003B
COVER, Tine IR5003B
BOLT, 5/16-18 x 1-1/2” Hex Flange Lock GR5
SPRING, Depth Bar IR5003B
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
PIN, Drag Shield (1/4” Dia. x 14-1/2” Steel Rod)
PUSHNUT, 1/4”
HINGE, Half
NUT, 1/4-20 Hex Flange Lock
SHIELD, Drag
WELDMENT, Right Tine
SCREW, 5/16-24 x 2” Hex Head Cap GR5
NUT, 5/16-24 Hex Center Lock
WELDMENT, Left Tine
DEPTH-BAR
BOLT, 1/4-20 x 1/2” Short Neck Carriage GR5
REINFORCEMENT, Rear Tine Cover
BOLT, 5/16-18 x 5/8” Hex Flange Lock GR5
REINFORCEMENT, Front Tine Cover
SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
BRACKET, Support IR5003B
PLATE, Latch
SCREW, 5/16-18 x 1” Hex Washer Self-Tap
ASSEMBLY, Tine (Incl. items 27 thru 30)
27
28
29
30
7046798
7075142
7014981
7090524
7090289
1
8
16
16
8
WELDMENT, Tine Hub ICFR
TINE, 11.5” (.312” Thick)
BOLT, 3/8-24 Shoulder
NUT, 3/8-24 Hex Top Lock GR C
NUT, 3/8-24 Hex Center Lock GR5 or B
Was 91070
Was 91065
Was 49735
Was 49734
Was 91686
Was 91742
ICFR5004B, EICFR5004B,
ICFR5505BV, CICFR5505HV,
EICFR5505BV and
ICFR7005BV only
Was 38215
Footnotes:
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
15
7006047
TP 400-5172-9-RT-N
SHIFT & DRIVE COMPONENTS
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
16
SERIES 3, 4 & 5
SHIFT & DRIVE COMPONENTS
Item Part No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
7047884
7091601
7013550
7091303
7090361
7090959
7023851
7011791
7038646
7033349
7017018
7046932
7091294
7090290
7032843
7074749
7090964
7032846
7074748
7013849
7010948
7032662
7091585
7090595
7016314
7012830
7011194
7090201
7015403
7023852
7091102
7091122
7033962
7091946
7016022
7090951
7091076
Qty
1
8
1
3
12
1
1
1
1
2
1
1
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
21
1
1
16
Description
Note
WELDMENT, Shift Lever
NUT, 5/16-18 Hex Flange Lock
ROLL PIN 3/16 x 1”
BOLT, 5/16-18 x 3/4” Square Neck Carriage GR5
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
BOLT, 5/16-18 x 2-1/2” Short Neck Carriage GR5
TUBE, 3/8” I.D. x 1-7/8” Long
RETAINER, 5/16” Bolt (Black)
PLATE, Shift
BUSHING, Rubber
COVER, Shift
COVER, Shift
WASHER, 1/4” Flat
SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
BRACKET, Idler Pivot (shown)
BRACKET, Idler Pivot (not shown)
BOLT, 3/8-16 x 1-1/2” Flat Head Carriage
BRACKET, Idler Arm (shown)
BRACKET, Idler Arm (not shown)
SPACER, 5/16” I.D.
PULLEY, Idler ( 2” Outside Diameter)
GUIDE, Idler
NUT, 3/8-16 Hex Center Lock GR5 or B
BOLT, 5/16-18 x 5/8” Hex Flange Lock GR5
WASHER, 11/32” Flat
KEY, 3/16 Sq. x 3/4” Long
PULLEY, Driven (9” Outside Dia.)
SCREW, 5/16-18 x 5/16” Hex Set
BELT, Drive (4L Kevlar 19.09” effective length)
SPACER, 5/8” Internal Dia.
WASHER, 1/4” Belville
SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
BRACKET, Belt Cover- IRT
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
COVER, Belt
NUT, 5/16-18 Hex Large Flange Center Lock
WASHER, 5/16” Flat
Was 91070
Was 91072
Was 90055
Was 91686
Was 90546
Was 90539
Footnotes:
NOTE: * Purchase engine parts from engine manufacture dealer.
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
17
7006047
TP 400-5172-9-RT-N
SHIFT & DRIVE COMPONENTS
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
18
SERIES 3, 4 & 5
SHIFT & DRIVE COMPONENTS
Item Part No
Qty
35
36
37
38
39
40
41
7090322
7090391
7032541
7011809
7015226
7011762
7091841
3
3
1
1
1
1
2
42
7073743
7074764
7073801
7073802
7074765
7028620
1
1
1
1
1
1
2
43
44
45
46
Description
Note
SCREW, 5/16-24 x 1/2” Hex Head Cap GR5
WASHER, 5/16” Internal Tooth Lock
GUIDE, Belt
PULLEY, Engine (2-1/2” Outside Dia.)
GUIDE, Belt (Finger)
BOOT, Spark Plug
SCREW, 5/16-18 x 1” Hex Washer Self-Tap
* ENGINE, B&S 5 HP Mod 130202-0127-01
* ENGINE, B&S 5.5 HP Mod 126432-0036-E1
* ENGINE, Honda 5.5 HP Mod GX160K1QX2 Type 553700
* ENGINE, B&S 7 HP Mod 120332-0208-E1
MUFFLER GUARD, 5HP B&S #391237(Euro) not shown
MUFFLER GUARD, 5.5HP B&S (not shown)
SCREW, B&S #94810 (Euro) (not shown)
SCREW, B&S #94887 (Euro) (not shown)
SCREW, B&S #95259 (Euro) (not shown)
SPACER, .340 I.D. x .63 O.D. x .310 Thick
Was 91685
Was 91742
Footnotes:
NOTE: * Purchase engine parts from engine manufacture dealer.
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
19
7006047
TP 400-5172-9-RT-N
WHEELS, TIRES, RIMS
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
20
SERIES 3, 4 & 5
WHEELS, TIRES, RIMS
Item Part No
1
2
3
4
5
6
7018579
7018580
7014512
7014511
7012234
7034162
7029841
Qty
1
1
1
1
1
2
2
Description
Note
ASSEMBLY, Right Wheel (Incl. items 2, 3 & 4)
ASSEMBLY, Left Wheel (Incl. items 2, 3 & 4)
RIM
TIRE, 13 x 5.00 x 6 (Lug)
VALVE, Air (Snap-In)
PIN, 5/16” Self-Locking Cotter
PIN, 5/16 x 1-11/16” Clevis
Was 91677
Footnotes:
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
21
7006047
TP 400-5172-9-RT-N
DECALS
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
22
SERIES 3, 4 & 5
DECALS
Item Part No
1
2
3
4
5
6
7071652
7074754
7071655
7071654
7071653
7074756
7015684
7043853
Qty
Description
Note
DECAL, Ground Breaker (5HP)
DECAL, Ground Breaker (5-1/2HP)
DECAL, SNAPPER
DECAL, 5HP Engine
DECAL, Dash Panel (5HP)
DECAL, Dash Panel (5-1/2HP)
DECAL, Warning (Rotating Tines)
DECAL, Safety Operating Instructions
Footnotes:
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
23
7006047
TP 400-5172-9-RT-N
DECALS (continued)
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
24
SERIES 3, 4 & 5
DECALS (continued)
Item Part No
7
8
9
10
11
12
13
14
7046534
7046919
7043854
7017682
7015408
7046994
7023043
7029470
Qty
Description
Note
DECAL, Warning/Instructions
DECAL, Starting and Warning
DECAL, Warning/Starting Procedure
DECAL, Engine Oil
DECAL, Starting Procedure
DECAL, Caution (Standing on end)
DECAL, Caution (Standing on end)
DECAL, Patent Numbers
Footnotes:
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
25
7006047
TP 400-5172-9-RT-N
DECALS (continued)
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
26
SERIES 3, 4 & 5
DECALS (continued)
Item Part No
15
16
17
18
19
20
21
22
7028700
7042837
7072134
7073339
7075378
7074548
7029776
7047040
7074760
Qty
Description
Note
DECAL, Chute/Read Manual (Euro)
DECAL, OPC Tiller (Euro)
DECAL, Dash Panel (Euro)
DECAL, OPEI Tiller
DECAL, 2003 Year of Manufacture
DECAL, 2002 Year of Manufacture
DECAL, European Community
DECAL, Chain Case Inspected By
DECAL, Fuel Safety Tiller
Footnotes:
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
27
7006047
TP 400-5172-9-RT-N
DECALS (continued)
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
28
SERIES 3, 4 & 5
DECALS (continued)
Item Part No
23
24
25
26
27
28
7074814
7074815
7074816
7074817
7074820
7016134
Qty
Description
Note
DECAL, Warning and Starting Instruction
DECAL, Stop
DECAL, Speed
DECAL, Choke and Fuel
DECAL, Engine On-Off
DECAL, Caution Tag
Footnotes:
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
29
7006047
TP 400-5172-9-RT-N
CULTIVATOR SHIELD KIT
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
30
SERIES 3, 4 & 5
CULTIVATOR SHIELD KIT
Item Part No
1
2
3
4
5
6
7
8
7060865
7036266
7032724
7038397
7012431
7090803
7090911
7091294
7091597
Qty
2
2
1
2
1
2
1
2
Description
Note
KIT, Cultivator Shield
CULTIVATOR, Shield
BRACKET, Front Latch
PIN, Drag Shield
PIN, 1/4” Hair
BOLT, 1/4-20 x 5/8” Flat Hd. Short Neck Carriage
SCREW, 1/4-20 x 1-1/4” Hex Washer Self-Tap
WASHER, 1/4” Flat
PIN, 3/32 x 3/4” Cotter
(Incl. items 1 thru 9)
Was 90055
Was 90037
Footnotes:
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
31
7006047
TP 400-5172-9-RT-N
HILLER - FURROWER KIT
Manual No.
7006047
TP 400-5172-9-RT-N
INTERMEDIATE
32
SERIES 3, 4 & 5
HILLER - FURROWER KIT
Item Part No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
7060731
7047875
7047858
7047865
7032430
7035072
7036135
7036134
7090779
7090705
7091316
7090316
7090188
7091537
7091596
7013111
7091540
7091511
7080187
7040527
7013460
7038217
7090134
7090122
7090118
7091302
7014206
Qty
1
1
1
1
1
1
1
1
1
1
4
8
4
3
3
2
2
2
1
1
1
2
1
2
6
1
Description
Note
KIT, Hiller/Furrower
BRACKET, Clevis
DRAW-BAR
STANDARD
SKID-SHOE
HILLER-FURROWER
WING, Left Side Hiller
WING, Right Side Hiller
BOLT, 1/2-13 x 3-1/2” Sh. Neck. Carriage GR2
WASHER, 1/2” Flat
NUT, 1/2-13 Hex GR5 or B
BOLT, 5/16-18 X 3/4” Square Neck Carriage GR5
WASHER, 5/16” Flat
WING-NUT, 5/16-18
PIN, 1/8” Hair
PIN, 1/2 x 1” Clevis
BOLT, 5/16-18 x 1-1/2” Hex Head Cap GR5
NUT, 5/16-18 Hex GR5 or B
WASHER, 5/16” Split Lock
BRACKET, Mounting (Front Tine Tiller only)
PIN, 3/8 x 1-1/2” Clevis (Front Tine Tiller only)
SUPPORT, Clevis
SCREW, 3/8-16 x 3/4” Hex Head Cap GR5
WASHER, 3/8” Flat
WASHER, 3/8” Split Lock
NUT, 3/8-16 Hex GR5 or B
SPACER (not shown)
(Incl. items 1 thru 26)
Was 90258
Was 90492
Was 13844
Was 90211
Was 90196
Was 90130
Footnotes:
INTERMEDIATE
SERIES 3, 4 & 5
Manual No.
33
7006047
TP 400-5172-9-RT-N
Parts Manual for
INTERMEDIATE
REAR TINE TILLERS
SERIES 3, 4 & 5
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
McDonough, GA, 30253 U.S.A.
COPYRIGHT © 2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Manual No.
Revision 9,
2/28/2006
7006047
TP 400-5172-9-RT-N