Download Philips MCD988/93 User's Manual
Transcript
MCD 988 Quick Start Guide What’s in the Box? You should find these items upon opening the box. DIN cable AV cord (R/W/Y) Quick 1 Start Gu U ideser 2 Man ual FM antenna MCD988 QUG_93_Eng W all 3 Mo un tin g Quick start guide User manual Wall mounting instructions 1 Remote control with two AAA batteries Brackets and screws Cabling channel (optional) 2007.8.30, 11:12 1 Connect the sub woofer to the main unit with the supplied DIN cable. 2 Connect speakers. Tips – See the User Manual for other TV connection options. – For connecting to a Progressive Scan TV, refer to the user manual for proper connections and detailed setup. 3 Connect the FM antenna. 4 Connect the AV cable to a TV. 5 Connect the power cords of the system and TV. Speaker (right) FM antenna AUDIO IN S-VIDEO IN AC power TV IN VIDEO IN AUDIO IN S-VIDEO IN TV IN VIDEO IN 5 4 3 1 2 Subwoofer AC power 5 STOP STOP Setting up the TV 1 Press SOURCE (DISC 1 or DISC 2 on the remote) to select the disc source. 2 Turn on the TV and set it to the correct Video In channel. MCD988 QUG_93_Eng 2 2007.8.30, 11:12 Speaker (left) Setting the clock 1 In Standby mode, press and hold CLOCK/RDS on the remote until the time flashes on the display. 2 Press VOLUME +/ - (VOL+/- on the remote) to set the hours and CLOCK/RDS to confirm. 3 Press VOLUME +/ - (VOL+/- on the remote) to set the minutes and CLOCK/RDS to confirm. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below: 1) Turn off your TV progressive scan mode or turn on to the interlaced mode. 2) Press SYSTEM MENU on the remote to exit the system menu and then DISC 1 (or DISC 2) and “1” to exit progressive scan. ANALOG AUDIO SETUP SPDIF SETUP QUALITY DIVX (R) VOD 3D PROCESSING Tip See chapters "Getting Started" and "System Menu Options" in the User Manual for detailed descriptions. MCD988 QUG_93_Eng 3 2007.8.30, 11:12 Playing a disc 1 Press DISC 1 ç / DISC 2 çon the remote to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing you. 2 Playback will start automatically. If not pressÉÅ . 3 To stop playback, press STOP9 (9 on the remote). Programming and tuning to radio stations 1 Press SOURCE (or TUNER on the remote control) to select tuner source. 2 Press PROGRAM on the remote control for more than two seconds to program all available stations in order of waveband. 3 Press ¡ / ™ (or 1 / 2 on the remote control) until the desired preset station is displayed. Tip Detailed playback features and additional functions are described in the accompany owner's manual. Notes for remote control: – First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or TUNER, for example). – Then select the desired function ( 2;, í, ë for example). C Royal Philips Electronics N.V. 2007 All rights reserved. http://www.philips.com PDCC-Jason-0734 MCD988 QUG_93_Eng 4 2007.8.30, 11:12