Download Nuvo LSA40 User's Manual
Transcript
The Sound of LiVing LSA40S Local Source Amplifier for Use with Essentia and Concerto NuVo System zone speakers. VARIABLE OUTPUT VARIABLE OUTPUT OUTPUT POWER TIP=L RING=R TIP=L RING=R 20W/6OHM X2 FIXED OUTPUT 2 ZONE 2 3 TIP=L RING=R 20W/6OHM X2 4 R 1 L R 2 3 TIP=L RING=R VARIABLE OUTPUT OUTPUT POWER TIP=L RING=R 11 2 TIP=L RING=R 20W/6OHM X2 FIXED OUTPUT ZONE 4 2 4 3 OUTPUT POWER 1 RS-232 TIP=L RING=R 20W/6OHM X2 FIXED OUTPUT FIXED OUTPUT ZONE 7&8 ZONE 6 ZONE 5 3 VARIABLE OUTPUT VARIABLE OUTPUT OUTPUT POWER 20W/6OHM X2 FIXED OUTPUT ZONE 3 6 5 L 20W/6OHM X2 FIXED OUTPUT CONNECT TO NV-I8X L VARIABLE OUTPUT OUTPUT POWER OUTPUT POWER FIXED OUTPUT ZONE 1 1 VARIABLE OUTPUT 2 3 SUM1 USE CNLY WITH 250V FUSE PROGRAM SYS ON USE NV-SLC1 CABLE CONNECT TO NV-I8EZP1 CONNECT TO NV-I8X USE NV-NC1 CABLE USE NV-SLC1 CABLE NETWORK DIGITAL LINK MODEL NV-I8DM SIX SOURCE EIGHT ZONE AUDIO DISTRIBUTION SYSTEM 120V 60Hz 500W FUSE:T5 A NuVo Technologies Cincinnati Ohio USA www.nuvotechnologies.com R 4 SOURCE INPUTS 5 4 6 5 6 5 6 8 7 5 4 6 SUM2 EXT. MUTE R SOURCE STATUS INPUTS ZONE TRIGGER OUTPUTS EMITTER OUTPUTS SYSTEM CONFORMS TO UL STD.6500 CERTIFIED TO CAN/CSA STD.E60065 US C SOURCE LINK 3033118 Any NuVo System zone output can be wired to the LSA40 Local Source Amplifier. A two conductor wire is used as a voltage trigger from the LSA40 the NuVo zone keypad. When the zone is turned on this allows to NuVo system audio to pass to the zone speakers. When the zone is turned off the internal amplifier of the LSA40 is automatically engaged. Any stereo line level source signal can be amplified through the local source speakers using the LSA40. The connection from the LSA40 to the Essentia or Concerto keypads is done using the provide two prong plug. LSA40 Back TO AMPLIFIER TO SPEAKER 28VDC 1.5A LR+ R- TO KEYPAD MODEL:NV-LSA40 LOCAL SOURCE AMPLIFIER + L+ LSA40 Front INPUT + L+ LR+ R- NuVo Technologies LLC Cincinnati, Ohio USA www.nuvotechnologies.com Designed In USA Made In China WIRE STRIP 5/16” (8MM) POWER NV-LSA40 Local Source Amplifier VOLUME ON OFF ALL OFF CD1 CD2 TNR1 TNR2 TNR3 SAT AC Power Source 50 Watt AC power adapter supplied with the LSA40P 89 The Sound of LiVing LSA40S Local Source Amplifier for Use with Generation D Simplese NuVo System zone speakers. 2 1 3 4 ZONE 4 38KHz 56KHz D L L L 1 3 1 STATUS ON=+12V R R R 2 4 2 MUTE =0V FOUR-SOURCE FOUR-ZONE Simplese LINK IN T ERTEK CONFORMS TO UL STD.6500 CERTIFIED TO CM 100~240V SPEAKER AND DATA SIGNALS 50~60Hz 85W US CAN/CSA STD.E60065 C NuVo Technologies Cincinnati Ohio USA 3033118 RS232 I NT FIXED SOURCE INPUT NORMAL USE VAR LINE OUT ER TEK USE FOR SAT OR CABLE SYSTEM IR OUT ALL PORT CONNECTION Any NuVo System zone output can be wired to the LSA40 Local Source Amplifier. + Right Zone 3 + - The selected zone speaker output of the “Generation D” Simplese Allport™ is wired directly to the LSA40 Back MODEL:NV-LSA40 LOCAL SOURCE AMPLIFIER TO AMPLIFIER LR+ R- 28VDC 1.5A + L+ TO KEYPAD Right Zone 4 + - Right - Zone 2 + + Left Left - Any stereo line level source signal can be amplified through the local source speakers using the LSA40. TO SPEAKER + Right Left Zone 1 + - - Left + - A two conductor wire is used as a voltage trigger from the LSA40 the NuVo zone keypad. When the zone is turned on this allows to NuVo system audio to pass to the zone speakers. When the zone is turned off the internal amplifier of the LSA40 is automatically engaged. The connection from the LSA40 to the Simplese keypads is done using a green two pin screw down terminal. LSA40 Front INPUT + L+ LR+ POWER NV-LSA40 Local Source Amplifier MUTE TNR1 CD TNR2 HD 0 1 2 6 5 4 3 7 R- NuVo Technologies LLC Cincinnati, Ohio USA www.nuvotechnologies.com Designed In USA Made In China WIRE STRIP 5/16” (8MM) AC Power Source 50 Watt AC power adapter supplied with the LSA40P