Transcript
New Holland Front Blades – Quick-Attach Specifications 54CB 60CB 60CBH 72CB 72CBH 84CBH MODEL 54CB 60CB 60CBH 72CB 72CBH 84CBH 54 (1372) 60 (1524) 60 (1524) 72 (1829) 72 (1829) 84 (2134) Moldboard width, in. (mm) Moldboard height, in. (mm) 17 (432) 19 (483) 22 (559) 22 (559) 22 (559) 22 (559) Reversible cutting edge ......................................................................................................................standard........................................................................................................... Cutting edge thickness, in. (mm) 0.375 (10) 0.5 (13) 0.5 (13) 0.5 (13) 0.5 (13) 0.5 (13) Manual angling standard n/a n/a n/a n/a n/a Hydraulic angling n/a standard standard standard standard standard Angling range, degrees ........................................................................................................................0 to 30 ........................................................................................................... Adjustable skid shoes.........................................................................................................................standard........................................................................................................... Weight, lbs. (kg) 120 (54) 311 (141) 311 (141) 535 (243) 540 (245) 570 (259) Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563). Design, materials and/or specifications are subject to change without notice and without liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may var y outside these areas. © 2008 CNH America LLC New Holland is a registered trademark of CNH America LLC. Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual before using the equipment. Pay close attention to all safety and operating decals and never operate machinery without all shields, protective devices and structures in place. Page 1 of 1