Transcript
Specifications & Capacities Rear Blades RBT45 Series Blade Width Approximate Weight (lbs.) with hydraulic links RBT4596 RBT45108 96” 108” 1130 1166 Maximum Engine Horsepower 125 Maximum G.V.W. (lbs.) 9500 Hitch Type Cat. 2 & 3 (Fits Land Pride Quick Hitch) Blade Angle Manual Linkage: Hydraulic Cylinder: 15 positions up to 45 degrees clockwise and counter clockwise forward and same for reverse. (Center, 7 clockwise and 7 counter clockwise) Infinite number of positions up to 45 degrees clockwise and counterclockwise froward and same for reverse. Angle Cylinder Blade Tilt Manual Ratchet Jack Hydraulic Cylinder: 4” X 16” Up to 15 degrees left and right. Infinite number of positions up to 15 degrees left and right. Tilt Cylinder Blade Offset 3” X 6” Manual Linkage: Hydraulic Cylinder: 15 positions up to 35 inches. (Center, 7 left and 7 right) Infinite number of positions up to 35 inches left and right. Offset Cylinder 4” X 16” Moldboard Height Moldboard Thickness Cutting Edge Main Frame 19” 5/16” with 1/4” boxed reinforcement 1/2” x 6” Heat treated and reversible Fully enclosed welded, formed box Parking Stand Options Retractable Skid Shoes, End Plates, Single or Dual Gauge Wheel, Double Selector Valve, Cushion Valve Designs, specifications, features and information are subject to change without notice. 5/07/07 301-205S 301-205S 54