Download Lightolier C4MRL User's Manual

Calculite® Evolution Lensed Wall Washer
Page 1 of 2
C4MRL
4" Aperture MR16 Reflector Trim
C4ALV
C4LV
C4AICLV
10 1/8"
14 5/8"
(257mm)
(372mm)
12 5/8"
(321mm)
9 5/8"
(245mm)
5" (127mm)
5" (127mm)
14 3/8"
(365mm)
11 3/16"
(284mm)
22 3/8"
(568mm)
14 3/8"
(365mm)
5
1 3
6
9" (229mm)
2
4
9 1/4"
5 1/4"
6" min.*
6 1/2" max.
C4MRLCLW / C4AICLV
.875" Max. Ceiling Thk.
6" min. is for up to 3/4" thick ceiling.
4 1/8" Dia.
5 1/2" Dia.
C4MRLCLW / C4LV or
C4MRLCLW / C4ALV
Ceiling Cutout: 5 1/16" (129 mm) Dia.
Reflector Trim
C4MRL CLW
C4MRL CLP
C4MRL
Specular Clear,
White Flange
Specular Clear,
Polished Flange
Add suffix. See
options for other
finishes.
Frame-In Kit
Non-IC 120V/277V
Non-IC AirSeal® 120V/277V
IC AirSeal® 120V
C4LVMU
Magnetic 120/277V
C4ALVMU
Magnetic 120/277V
C4AICLVM1
Magnetic 120V
C4LVE1
Electronic 120V
C4ALVE1
Electronic 120V
C4AICLVE1
Electronic 120V
C4LVE2
42-75W
MR16(12V)
Electronic 277V
42-75W
MR16(12V)
20-50W
MR16(12V)
Remodel Frame-In Kit
Note: Magnetic transformers may produce audible sound when used with
dimmers, which may be objectionable in acoustically critical areas.
Features
Non-IC 120V
C4LVE1RM 50W Max. MR16 (12V)
1. Aperture Cone: 16 ga. aluminum, 50° visual cutoff to lamp and lamp image.
Keyed to kick reflector to prevent incorrect installation of cone. Hinged, and
snaps onto kick reflector for easy tool-less installation. Available with painted
white or polished flange. Interchangeable with other Evolution 4 1/2" low
voltage trims.
2. Kick Reflector: 16 ga. aluminum. Specular kick reflector with directional
spread lens distributes light smoothly for vertical surface wall
washing.
3. Directional Spread Lens: High temperature, tempered glass. Precisely
contoured to fit onto cone; replaceable.
4. Socket Harness: Porcelain bi-pin socket. Pre-wired with
No. 18 teflon® leads .
5. Power Harness: Provides power to transformer.
6. Frame-In Kit: Compatible frame-In kits are listed above. See separate
frame-in kit specification sheets for details.
Non-IC and Non-IC AirSeal® - Insulation must be kept 3" away from fixture
sides and wiring compartments and must not be placed above fixture in a
manner which will entrap heat.
IC-Airseal®- Fixture may be in direct contact with insulation.
7. Maximum Ceiling Thickness: .875", 1.75" with C4TCA2 accessory
(see C4TCA2 specification sheet for details.)
See C4LVE1RM specification sheet for
more information.
Options and Accessories
Reflector Finishes1
Clear: CL
Gold: GD
Comfort Clear Diffuse: CCD 1
Specify desired flange
W White, P Polished
White: WH Black: BK
Champagne Bronze: CCZ
Labels
CULUS Listed (suitable for wet locations), I.B.E.W.
Teflon® is a registered trademark of E.I. DuPont.
US Patent No. 5,957,573. Other US and Foreign Patents Pending.
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • I0808
Lightolier is a Philips group brand
Calculite® Evolution Lensed Wall Washer
Page 2 of 2
C4MRL
2" Aperture Pinhole MR16 Reflector Trim
Downlight
Lighting Data
Candlepower Curve
73W MR16 RL
EXAMPLE: With multiple units located
2’ from wall and 2’ on center, the illumination on the
wall 3’ down from the ceiling is 24 f.c. beneath and
23 f.c. between fixtures.
2’
45˚
45˚
25˚
25˚
2’
3’
24 f.c.
23 f.c.
Down
5˚
5˚
Wall
Report 0825FR
Efficiency = 47.8%
Footcandles on Wall From Multiple Units - 73W MR16 FL
Distance From Ceiling, Ft.
Units 2 Feet From Wall
2'
3'
1’
2’
3’
4’
5’
6’
7’
8’
9’
8
18
23
22
19
15
12
10
8
3
11
13
14
12
10
8
7
6
10
21
24
23
19
15
12
10
8
10
21
24
23
19
15
12
10
8
9
16
18
16
14
11
9
7
6
9
16
18
17
14
11
9
7
6
Units 3 Feet From Wall
2'
3'
1’
2’
3’
4’
5’
6’
7’
8’
9’
2
6
8
10
10
10
9
8
7
1
4
6
7
7
7
7
6
6
2
7
9
11
11
10
9
8
7
2
7
9
11
11
10
9
8
7
2
6
8
9
9
8
7
7
6
2
6
8
9
9
8
7
7
6
Conversion Factors:
37W IR and 50W MR16 FL: F.C. x 0.6
37W IR and 35W MR16 FL: F.C. x 0.4
37W IR and 20W MR16 FL: F.C. x 0.2
Footcandles values are averaged and rounded off and are based on a minimum of five units. For fixture-to-wall distances, other than
those shown, use maximum of 1 to 1 spacing (distance between fixtures not more than distance to wall) for best results.
Job Information
Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • I0808
Lightolier is a Philips group brand