Transcript
Specifications & Capacities Rear Blades RBT35 Series Blade Width Approximate Weight (lbs.) with manual links Maximum Engine Horsepower Maximum G.V.W. (lbs.) Hitch Type Blade Angle RBT3584 RBT3596 84” 96” 709# 745# 80 HP for 2 Wheel Drive and 65 HP for 4 Wheel Drive 9500 Cat. 1 & 2 Fits Land Pride Quick-Hitch Manual: hydraulic: Angle Cylinder Blade Tilt 9 positions in 10 degree increments (1 center, 4 clockwise & 4 counterclockwise). Up to 50 degrees in either direction. 3 1/2” X 14” X 1 1/4” Up to 20 degrees Tilt Cylinder 2” X 6” X 1 1/4” Blade Offset Up to 30 inches left and right Offset Cylinder Moldboard Height Moldboard Thickness Moldboard King Pin Cutting Edge Main Frame Construction Parking Stand Accessories 3 1/2” X 14” X 1 1/4” 17” tall 5/16” reinforced, 3/16” tapered reinforcement channel 3" diameter 1/2” x 6” Heat reversible blade Fully Welded Tubular Construction Retractable Skid Shoes End Plates Gauge Wheel Cushion Valve 26808 Top View Designs, specifications, features and information are subject to change without notice. Side View 67 301-251S 2/16/09