Transcript
REAR BLADES Ideal for ditching, road grading & all-around farm use. Whether the job is landscaping, construction, snow removal, feedlot cleaning or irrigation ditching, Land Pride offers a wide range of Rear Blades to suit your needs. Land Pride Rear Blades feature rolled moldboards to keep material flowing and reversible heat treated cutting edges to give twice the life. Heavy-duty A-frames and mainframes have been designed to give maximum strength and durability. All kingpins are constructed of solid steel and are sized to match the HP requirements of each blade. With simple manual adjustments, our Blades angle to move material off to the side, tilt to dig or grade slopes and offset to get at hard to reach places. Hydraulic angling, tilt and offset are available on the RBT35, RBT40, RBT45 and RBT55 Series Blades. Land Pride also offers many options to meet your job requirements including side plates Series to move bulk material and skid shoes 25 HP to lengthen blade life and prevent damage to the working area. 05 RB05 SERIES 17 - 25 HP — 48” 60” • Cat. 0 with Cat. 1 pins • 5 Forward angles, 5 reverse angles • 10” Offset left or right • 13 1/2” Moldboard height • 1/4” Moldboard thickness • 3/8” x 3” Heat treated cutting edge • Landscape Rake adaptable • Storage Stand Which Blade is right for you Maximum Horsepower 15 Series 40 HP 25 Series 60 HP 35 Series 80 HP 40 Series 100 HP ? 45 Series 125 HP 11 55 Series 180 HP