Download Genie AL5 HT Bid Specifications

TEREX AL 5HT
TM
ENGINE
 Kubota® D1105 - liquid cooled, diesel engine
o Standby – 15.4 hp @ 1800 rpm
o Prime – 13.5 hp @ 1800 rpm
o 3 cylinder
o 1.123 L displacement
 Fuel consumption (prime) ~ 0.5 gph
 60 Hz engine/generator
 Industrial engine exhaust system
 Rubber vibration dampers isolate engine/generator from frame
 Cooling system capable of operating at 120°F ambient
 Full flow oil filter, spin on type
 Fuel filter with replaceable element
 Dry type cartridge air filter
 Polyethylene fuel tank with large diameter opening
o 30 gal. capacity
o 60 hr. run capacity
o 3 ½” fill port
ENGINE CONTROLS
 Galvanized control panel located inside cabinet
 Four position keyed switch – glow plugs (preheat, off, run, start)
 Hour meter
 Automatic low oil/high temperature shutdown system
GENERATOR
 Marathon Electric
o Brushless
 8 kW standby output
 120/240 VAC – 20/30A
 +/-6% capacitor voltage regulation
ELECTRICAL SYSTEM AND CONTROLS
 Individual floodlight circuits with 15A breakers
 Hydraulic tower controls located inside cabinet
 30A start limit breaker (assures no load condition exists before starting)
 Standard individually breakered convenience outlets:
o (1) 120 VAC 20 Amp GFCI duplex outlets (Nema 5-20R type)
o (1) 240 VAC 30 Amp twistlock outlets (Nema L6-30R type)
 700 CCA wet cell battery
FLOODLIGHTS
 Four light fixtures – 1000 watts each - metal halide
 Quick adjust cast aluminum square housing with horizontally mounted bulbs
 Tempered glass lens
 Silicone gaskets for moisture and dust protection
 Individual floodlight On/Off switches
WIRING
 All wiring is sized to the amperage draw required
 AC & DC wiring diagrams are provided in service manual
MAST
 28’ articulated hydraulic mast with 20’ of outreach
 359° of powered rotation
 Mast cable track to manage electrical cables
 Equipped with single lifting eye and fork pockets
ENCLOSURE
 Steel enclosure – 14-gauge
o UV& fade resistant, high temperature cured, white polyester powder paint
 Dome light with switch, 12V
 English, English/French, or symbol operating/safety decals
 License plate holder with light
 Manual holder with operating manual
TRAILER
 Mast support – 3” x 2” x 3.16” tubular steel A-frame
 Removable / flip up tongue – 46.75” long
 Tubular steel chassis – 2.5” x 3/16”
 Four, 3000 lb. adjustable leveling jacks – 4 point stance
 All jacks transport and lock in horizontal position for storage
 Side outriggers - 8’ 2.5” span
 Safety chains with s-hooks
 2” ball hitch
 Steel fenders – 16 gauge
 DOT approved tail, side, brake, and directional lights
o Recessed rear and side lights
 4200 lb. leaf spring axle
 P205/75L15 tires
 73” axle span
WEIGHTS & DIMENSIONS
 Dry weight: 2,650 lbs (1,182 kg)
 Mast stowed: 98 x 83.5 x 81 in (2.49 x 2.12 x 2.07 m)
WARRANTY
 1 year parts and service
 Engine and generator covered under OEM warranty – consult factory for details.
CERTIFICATIONS
 CSA certified
Options
CHASSIS OPTIONS











30 gal fuel tank with spill containment
60 gal fuel tank
60 gal fuel tank with spill containment
Highway safety chains w/ snap hook
Hitch, 2 1/2 in Ring
Hitch, 2 5/16 in Ball
Hitch, Combination Ring and Ball
Spare tire and wheel
Tough coat paint surface: cabinet and trailer front
Trailer brakes, electric
Trailer brakes, Hydraulic surge: must specify either ring or ball hitch
ENGINE OPTIONS






12 kW, 60 Hz generator with 16.3 hp Kubota diesel
20 kW, 60 Hz generator, include external receptacle package,
and 2 ea. 20A/12V GFI & 3 ea. 30A/240V T/L
Auto-Start
Mechanical automatic air shutdown
Fuel/water separator filter
Fuel/water separator with fuel line heater
TOWER OPTIONS



6 metal halide lights
8 metal halide lights: only available with 12kW or 20 kW engine option
Tower Lock kit
COLD WEATHER OPTIONS




1000 CCA battery
Battery heater blanket
Engine block heater
Low temperature coolant mixture (-40° F)