Download Epson Livingstation LS47P2 Product Support Bulletin

Transcript
EPSON
Date:
PSB #:
Reference:
Product(s):
Subject:
PRODUCT SUPPORT BULLETIN
10/19/2004
Originator: VWS
PSB.2004.10.006
Authorization:
TI 04-71e Rev.A
Total Pages: 1
Livingstation LS47P2/LS57P2
Livingstation LS47P2/LS57P2 Remote Controller STB programming code
Description:
This is to inform you of the two available remote controller part numbers for the
LS47P2/LS57P2 televisions and the programming code used. This bulletin also includes a
correction to page 40 of the Livingstation User’s Guide.
Information:
There are two different ATSC/NTSC tuners (LSDT1 or LSDT2) that ship with the
LS47P2/LS57P2. The TV remote comes pre-programmed to operate both the TV and the
supplied tuner by moving the switch at the top of the TV remote to the STB1 position.
Description
Remote Controller
Remote Controller
Part Number
1294604
1299343
Notes
Programmed for the LSDT1 tuner
Programmed for the LSDT2 tuner and the
LSDT1 tuner (default: LSDT2 tuner)
Each remote controller uses programming codes to configure it to the devices it can control.
The Remote Controller, part number 1294604, operates the LSDT1 tuner. The programming
code for this remote controller and tuner combination is 101.
The Remote Controller, part number 1299343, operates the LSDT2 tuner. You can also
program this remote controller to operate the LSDT1 tuner. To use this remote controller with
the LSDT2 tuner, the programming code is 101 (default). The code to use this remote
controller with the LSDT1 tuner is 155.
How to distinguish between the two kinds of remote controllers:
There is a 9 digit product code number located on backside of the TV remote controller.
Part number 1299343 has a product
code label 129934300
Part number 1294604 has a product
code label 129460400
Correction in Livingstation LS47P2/LS57P2 User’s Guide:
“Voom” is not supported as shown on page 40 under “DirecTV receiver programming codes.”
Page 1 of 1
PSB.2004.10.006