Transcript
DM630i Floor-standing loudspeaker system Product Summary ● Designed with the more demanding digital sources of the nineties in mind, the 600 series has earned a reputation for minimal coloration and musical accuracy in audio reproduction. Successfully capturing the transients found in music meant developing a loudspeaker able to do justice to the attack of the original audio signal. Designed by a master of industrial design Dr Kenneth Grange, the cool, dark lines of the 600 series cabinet are perfect partner for contemporary furniture and interior design settings. ● The DM630 delivers a more profound bass delivery via the larger 52-litre enclosure. ● The high excursions needed to extend the low frequency range to 40Hz are provided by two active 8in bass units which enable higher system power handling by sharing the LF load ● The bass is augmented by a rear facing port with a range of port lengths to allow for bass response adjustment of the system to reflect the listeners taste. Technical highlights ● B&W's Tweeter technology ensures that the sound remains focused and time sensitive and that the stereo image is presented with unparalleled three dimensional accuracy. ● The strict acoustic requirements of the cabinet have dictated a front baffle moulding of extra high rigidity. The polymer has been chosen for its composition and ability to reduce unwanted resonances to a minimum. Description 21/2-way 4th-order, variable port, bass Frequency Response 53Hz – 20kHz ± 2dB on reference reflex digital monitor system with bi-wiring Drive Units axis 1 x 26mm high frequency with metal Sensitivity dome, high temperature voice coil and Nominal Impedance 4 ohms fluid cooling Power Handling 2 x 200mm bass/midrange with rigid die-cast chassis, co-moulded reinforced 30W – 200W into 4 ohms on unclipped programme Dimensions polypropylene cone/low-hysteresis rubber surround assembly and 31mm 91dB spl(2.83V 1m) Height: 850mm Width: 236mm Depth: 407mm Finish Black Zelda high temperature voice coil on Kapton® former B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged. www.bwspeakers.com