Transcript
RETROSPECT COLLECTION® CONSOLE TABLE FIRE CLAY/METAL RETROSPECT COLLECTION® CONSOLE TABLE • Classically styled metal console table • Retrospect Collection pedestal top with faucet holes on 8" (203mm) centers • Console table legs feature classic styling with integral front and side towel bars and a lower clear tempered-glass shelf for storage. Available in Chrome or Satin finish. • Right Height™ for greater comfort during use • Part of design matched Retrospect Collection ® Separate Components: ❏ 0282.008 Console/Pedestal top 8" (203mm) centers ❏ 8711.000.002 Console table legs (Chrome) ❏ 8711.000.295 Console table legs (Satin) Nominal Dimensions with Sink: 27" x 19-3/4" x 36" (686 x 502 x 914mm) 13-3/4" (349mm) Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.9M for Non-Vitreous Ceramic Fixtures • CAN/CSA B45 Series 3 Holes 1-3/8" (35mm) Dia. 8" (203mm) FINISHED WALL 3-3/8" (86mm) 9" (229mm) 15" (381mm) 19-3/4" (502mm) 1-3/4" DIA. STD. DRAIN OUTLET To Be Specified: ❏ Color: ❏ Pedestal Top: White only ❏ Console Table Legs: 002 Chrome or 295 Satin ❏ Recommended Faucet: 2373.701 ❏ Faucet Finish: 002 Chrome or 295 Satin ❏ Supplies: ❏ 1-1/4" Trap: 752683-495 ❏ P Trap Finish: 27" (686mm) FINISHED WALL 8-1/8" TO BOTTOM OF DRAIN OUTLET (206mm) 7-1/4" (184mm) 3/8" (10mm) DIA. SINK ANCHOR SCREW HOLES ON 13-3/4" (349mm) CENTERS 8" (203mm) 1-1/4 O.D. WASTE * 24" (610mm) * 22" (559mm) 11" (279mm) 7-1/2" (191mm) 1-1/4" O.D. TAILPIECE SUPPLIES AS REQ'D 36" (914mm) FINISHED FLOOR 22" (559mm) NOTES: DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP *ARE SUGGESTED. ▼ ANCHOR SCREWS FOR LAVATORY AND PEDESTAL NOT INCLUDED. - FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.9M. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2008 AS America Inc. I23 Revised 2/08