Transcript
COMRADE™ WALL-HUNG LAVATORY VITREOUS CHINA BARRIER FREE COMRADE™ WALL-HUNG LAVATORY • Wall-hung sink • Vitreous china • Rear overflow • Soap depression • Faucet ledge (faucet not included) ❏ 0124.024 With wall hanger (Illustrated) Faucet holes on 102mm (4") centers ❏ 0124.131 For concealed arms support Faucet holes on 102mm (4") centers Nominal Dimensions: 508 x 464mm (20" x 18-1/4") Bowl sizes: 381mm (15") wide 276mm (10-7/8") front to back 159mm (6-1/4") deep Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2 for Vitreous China Fixtures 102mm (4) 64mm (2-1/2) 171mm (6-3/4) FINISHED WALL 464mm (18-1/4) C/L 508mm (20) To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap: ❏ Nipple: ❏ Concealed Arms Support (by others): S-9 HANGER (11-1/4) * See faucet section for additional models available *349mm 64mm (2-1/2) 203mm (8) 108mm (4-1/4) *235mm (9-1/4) 11mm (7/16) DIA. ANCHOR SCREW HOLES 203mm (8) (13-3/4) MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. Top of front rim mounted 864mm (34") from finished floor. 54mm (2-1/8) DIA. HOLES FOR CONCEALED ARMS 38mm (1-1/2) 419 mm (16-1/2) 267mm (10-1/2) 76mm (3) *286mm 8mm x 27mm (5/16 x 1-1/16) SLOTS POP-UP WASTE OUTLET 1-1/4 O.D. SUPPLIES AS REQ'D. DRAIN PLUG WASTE OUTLET 1-1/4 O.D. FINISHED FLOOR 787mm (31) 864mm (34) NOTES: DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP *ARE SUGGESTED. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2008 AS America Inc. M26 Revised 8/05