Transcript
CADET™ ELONGATED ONE-PIECE TOILET VITREOUS CHINA CADET™ ELONGATED ONE-PIECE TOILET ❑ 2100.016 •Vitreous china •Low-consumption (6.0 Lpf/1.6 gpf) •One-piece design •Elongated siphon action jetted bowl with 2" trapway •Rim height at 381mm (15") •Includes color-matched solid plastic “Rise and Shine” seat and cover (#5324.019) with easy-to-clean lift off hinge system •Color-matched trip lever •2 bolt caps •Internal trapway area fully glazed •100% factory flush tested Nominal Dimensions: 762 x 457 x 679mm (30" x 18" x 26-3/4") FINISHED WALL Fixture only, supply by others 762mm (30) 19 ± 6mm (3/4 ± 1/4) Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions 206mm (8-1/8) C/L OF SEAT POST HOLES 140mm (5-1/2) CENTERS 497mm (15-5/8) 473mm (18-5/8) 679mm (26-3/4) SUPPLY AS REQ'D FINISHED FLOOR 79mm (3-1/8) To Be Specified: ❑ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver ❏ Fawn Beige ❏ Black ❑ Trip Lever: 047242-XXX0A ❑ Color-matched (supplied) ❑ 002 Chrome ❑ 099 Polished Brass ❑ 295 Satin Nickel ❏ Supply with Stop: 375mm (14-3/4) *140mm (5-1/2) 16mm (5/8) 159mm (6-1/4) 305mm (12) 324mm (12-3/4) C/L OF OUTLET *133mm (5-1/4) FINISHED FLOOR 241mm (9-1/2) 457mm (18) NOTES: THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. * DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2008 AS America Inc. K16 Revised 2/08