Download American Standard 3046.016 User's Manual
Transcript
COMPACT CADET® 3 ELONGATED TOILET VITREOUS CHINA COMPACT CADET® 3 ELONGATED TOILET ❑ 2431.010 ❑ 3046.016 Elongated Bowl ❑ 4019.016 Tank Nominal Dimensions: 718 x 438 x 733mm (28-1/4" x 17-1/4" x 28-7/8") 15mm (5/8) FINISHED WALL To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Seat: #5325.010 Elongated Champion ® Slow Close solid plastic seat and cover with easy lift off feature ❏ Seat: #5284.016 Elongated EverClean® solid plastic seat and cover ❏ Seat: #5321.110 EverClean ® Elongated Seat with Slow Close Snap-Off Hinges ❏ Supply with stop: © 2008 AS America Inc. 716mm (28-1/4) 439mm (17-1/4) 470mm (18-1/2) C/L OF SEAT POST HOLES 140mm (5-1/2 CENTERS) SUPPLY AS REQ'D. 733mm (28-7/8) 355mm (14) 381mm (15) *203mm (8) Fixture only, seat and supply by others Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions • Los Angeles Department of Water and Power Supplementary Purchase Specification for Non-Adjustability 191mm (7-1/2) 102mm (4) •Vitreous china •Low-consumption (6.0 Lpf/1.6 gpf) • Space saving compact design - Elongated bowl fits in the same space as a round front toilet • 12" (305mm) Rough-in • EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface • Featuring the Cadet ® 3 Flushing System •Elongated siphon action jetted bowl with 2-1/8" trapway •Internal trapway area fully glazed • Generous 8" x 9" water surface area • Close coupled tank with flat tank cover for superior storage • Oversized 3" Flush Valve with Chemical Resistant Flapper • Speed Connect ® tank to bowl coupling system • Sanitary dam on bowl with four point tank stabilization •2 color match bolt caps • Chrome Trip Lever • Proven preferred styling •100% factory flush tested • 5 year warranty 267mm (10-1/2) 305mm (12) 296mm (11-5/8) FINISHED FLOOR C/L OF OUTLET 236mm (9-5/16) *152mm (6) NOTES: THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED. *SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. K73 Revised 2/08 © 2008 AS America Inc. K74 Revised 2/08