Download 3M MP8770/MP8770L User's Manual
Transcript
MP8755/MP8755L MP8770/MP8770L Multimedia Projector Operator’s Guide MP8755/MP8755L/MP8770/MP8770L Projecteur multimédia Guide de l'opérateur MP8755/MP8755L/MP8770/MP8770L Multimedia-Projektor Benutzerhandbuch Proyector de Multimedia MP8755/MP8755L/MP8770/MP8770L Manual del Usuario MP8755/MP8755L/MP8770/MP8770L Proiettore Multimediale Manuale dell'operatore MP8755/MP8755L/MP8770/MP8770L Bruksanvisning för multimediaprojektor E ON U M T STA ND BY E M N U A L P M IN R E W O P U P T T P M E R E S E T MP8755/MP8755L/MP8770/MP8770L Multimedia Projector Gebruiksaanwijzing AB LE EC TO + R 5 75 P8 M RT FOC US + PR OJ 3 PO ZO OM 3 MP 875 5 EPS-84A © 3M IPC 2000 3M™ Multimedia Projector MP8720 1 Table of Contents Safeguards ................................................................................................................. 3 Warranty ................................................................................................................. 5 Section 1: Unpack ....................................................................................................... 6 1.1 1.2 1.3 1.4 Section 2: 2.1 2.2 2.3 2.4 Section 3: 3.1 3.2 Section 4: 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 Section 5: 5.1 Section 6: 6.1 6.2 6.3 6.4 Section 7: 7.1 7.2 Section 8: 8.1 Appendix: ENGLISH Please click on any section to jump to that section. Contents of Shipping Box ......................................................................................................... 6 Optional Accessories ................................................................................................................. 6 Keep Your Packing Materials .................................................................................................... 6 What's Next? .............................................................................................................................. 6 Product Description .................................................................................. 7 Machine Characteristics ............................................................................................................ 7 Part Identification List ............................................................................................................... 8 System Setup — Connecting Various Equipment ..................................................................... 9 Remote Control Transmitter Identification ............................................................................... 11 Basic Operations ........................................................................................ 12 Projector Startup ........................................................................................................................ 12 Projector Shutdown ................................................................................................................... 12 Adjustments and Functions ...................................................................... 13 How To Use Height Adjustment Feet ........................................................................................ 13 Plug & Play — Function ........................................................................................................... 14 Freeze Function ......................................................................................................................... 14 Magnify Function ...................................................................................................................... 14 Picture-in-Picture ....................................................................................................................... 14 Menu Navigation ....................................................................................................................... 15 SETUP ....................................................................................................................................... 16 INPUT ........................................................................................................................................ 17 IMAGE ...................................................................................................................................... 18 OPT ............................................................................................................................................ 19 Maintenance............................................................................................... 20 Cleaning the Air Filter ............................................................................................................... 20 Lamp........................................................................................................... 21 Lamp .......................................................................................................................................... 21 Display Lamp Operation Hours ................................................................................................ 21 Reset Lamp Hours ..................................................................................................................... 21 Replacing the Lamp ................................................................................................................... 22 Troubleshooting ......................................................................................... 23 Symptom/Solution Table ........................................................................................................... 23 Message/Solution Table ............................................................................................................. 24 Accessories ................................................................................................. 25 Service Information ................................................................................................................... 25 Technical Information ............................................................................... A-1 The Appendix is in English only. Please click here to read it. © 3M 2000 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 1 ENGLISH 2 3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L © 3M 2000 Safeguards ENGLISH INTENDED USE Before operating the machine, please read the entire manual thoroughly. The 3M™ Multimedia Projector 8755/ 8755L/8770/8770Lwas designed, built and tested for use indoors, using 3M™ brand lamps, 3M™ brand ceiling mount hardware and nominal local voltages. This projector is not intended for household use. The use of other replacement lamps, outdoor operation or different voltages has not been tested and could damage the projector or peripheral equipment and/or create a potentially unsafe operating condition. IMPORTANT SAFEGUARDS 1. Read and understand all instructions before using. Pay particular attention to areas where this symbol is shown. WARNING - Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Caution - Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. It may also be used to alert against unsafe practices. ✔ 2. 3. Note - Used to emphasize important conditions or details. Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use. Never look directly into the projector lens when the lamp is on. The high pressure mercury lamp produces a strong light which could damage your eyesight. 4. 5. Care must be taken as burns can occur from touching hot parts. Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged – until it has been examined by a qualified service technician. 6. 7. Position the cord so that it will not be tripped over, pulled, or contact hot surfaces. If any extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat. 8. Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Grasp plug and pull to disconnect. 9. To reduce the risk of electric shock, do not immerse this appliance in water or other liquids. 10. To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified technician when service or repair work is required. Incorrect assembly can cause electric shock when the appliance is subsequently used. 11. 12. Connect this appliance to a grounded outlet. Do not expose this projector to direct sunlight, or use it outside. 13. Keep all ventilation openings free of any obstructions. 14. 15. Always open the lens shutter or remove lens cap when the projection lamp is on. Do not look directly into light beam of laser pointer. The pointer produces a strong light which could damage your eyesight. 16. 17. The projection lamp contains mercury. Always dispose of it in a proper manner according to local regulations. To avoid premature lamp failure, do not change the mounting position of the projector (desktop ceiling mount or ceiling desktop mount) and continue to use the same lamp. 18. Always operate machine on a flat, sturdy surface. © 3M 2000 ➮ ➮ 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 3 ENGLISH LOCATION OF PRODUCT SAFETY LABELS The following safety labels are used on or within the MP8755/MP8755L/MP8770/MP8770L projector to alert you to items or areas requiring your attention: CAUTION LASER RADIATIONDO NOT STARE INTO BEAM WAVE LENGTH: 650nm MAX . OUTPUT: 1mW CLASS 2 LASER PRODUCT CAUTION RADIAZIONI LASER NON GUARDARE NEL RAGGIO LUCE LASER DI CLASSE 2 LASERAPPARECCHIO RADIATION RAYONNEMENT LASER MANUFACTURED NE PAS REGARDER DANS DO NOT STARE INTO BEAM LE FAISCEAU APPAREIL A LASER DE CLASSE 2 PLACE OF WAVE LASER-STRAHLUNG LENGTH: 670 mm MANUFACTURER:A NICHT IN DEN STRAHL MADE IN JAPAN BLICKEN LASER KLASSE2 MAX. OUTPUT: 1mW IEC60825-1:1993+A1:1997 CLASS II LASER PRODUCT AVOID EXPOSURELASER RADIATION IS EMITTED FROM THIS APERTURE Laser Aperture SAVE THESE INSTRUCTIONS The information contained in this manual will help you operate and maintain your 3M MP8755/MP8755L/MP8770/ MP8770L Multimedia Projector. 4 3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L © 3M 2000 LIMITED WARRANTY 3M warrants this product against any defects in material and workmanship, under normal usage and storage, for a period of two years from date of purchase. Proof of purchase date will be required with any warranty claim. In the event this product is found to be defective within the warranty period, 3M's only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects. In the USA call 1-800-328-1371 for warranty or repair service. LIMITATION OF LIABILITY THE FOREGOING WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND 3M SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTIBILITY AND FITNESS. 3M SHALL NOT BE LIABLE FOR ANY DAMAGES, DIRECT, CONSEQUENTIAL, OR INCIDENTAL, ARISING OUT OF THE USE OR INABILITY TO USE THIS PRODUCT. Important: The above warranty shall be void if the customer fails to operate product in accordance with 3M's written instructions. This warranty gives you specific legal rights and you may have other rights which vary from state to state. FCC STATEMENT - CLASS A: This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause interference to radio communications. It has been tested and found to comply with the limits for a Class "A" computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his/ her own expense will be required to take whatever measures may be required to correct the interference. EEC STATEMENT: This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro Magnetic Compatibility) and fulfills these requirements. Video Signal Cables: Double shielded coaxial cables (FCC shield cable) must be used and the outer shield must be connected to the ground. If normal coaxial cables are used, the cable must be enclosed in metal pipes or in a similar way to reduce the interference noise radiation. Video Inputs: The input signal amplitude must not exceed the specified level. PATENTS, TRADEMARKS & COPYRIGHTS IBM is a registered trademark of International Business Machines Corporation. Apple Macintosh and Apple Powerbook are registered trademarks of Apple Computer, Inc. Microsoft and Windows 95 & Windows 98 are registered trademarks, and Windows and Windows for Workgroups are trademarks of the Microsoft Corporation. Toshiba is a registered trademark of Toshiba Corporation. Kensington is a trademark of Kensington Corporation. All other products are trademarks or registered trademarks of their respective companies. © 3M 2000 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 5 ENGLISH Warranty 1.1 Contents of Shipping Box The 3M™ MP8755/MP8755L/MP8770/MP8770L Multimedia Projector is shipped with the necessary cables required for standard VCR, PC, MAC™ II or laptop computer connections. Carefully unpack and verify that you have all of the items shown below in Figure 1.1. VIDEO T POSITION FOCU S JE C TO R E T U M M O ZO + Y DB AN ST N O U N E M PO W + ER LA M P T U P IN TE M P R E S E RGB LASER STANDBY/ON TA B LE P R O MP 877 0 O R RESET P ENGLISH Section 1: Unpack MENU FREEZE + MAGNIFY — VOLUME OFF Pin P MUTE BLANK AUTO TIMER + + FOCUS ZOOM — — MP 877 0 MP8770 Multimedia Multimedia Projector Projector Remote Control Transmitter ON OFF 2 S-Video Cable (S-Video mini DIN4-pin) Power Cord US, UK, Europe 3-Conductor Video/Audio Cable VGA Cable (15-15 pin M/M) 3 4 5 6 MAC Adapter Adaptor Stereo Mini-Jack Cable Figure 1.1 Inventory of Shipping Box The shipping carton contains the items illustrated in Figure 1.1. In addition, the following items are also included, but not shown here. If any of these items are missing, please contact your place of purchase. • • • PS/2 mouse cable .................. (1) ADB mouse cable ................. (1) Serial mouse cable ................ (1) 1.2 Optional Accessories • • RS-232 control cable ............ (1) USB mouse cable ................. (1) 1.3 Keep Your Packing Materials ✔ Important Save the shipping box and packing materials in the event the MP8755/MP8755L/MP8770/MP8770L should require shipping to a 3M Service Center for repair. 1.4 What’s Next? After you have unpacked the MP8755/MP8755L/MP8770/MP8770L system and identified all the parts, you are ready to set up the projector. Please read this guide thoroughly before operating your new projector. Be sure to check our web site (www.3m.com/meetings) regularly for updates and supplemental information. On the CDROM, you can link directly to the web site by clicking here or on “3M Innovation” in the lower right corner of the Main Menu. 6 3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L © 3M 2000 2.1 Machine Characteristics The MP8755/MP8755L/MP8770/MP8770L Multimedia Projector integrates ultra-high bright lamp and polysilicon LCD display technology into a single unit. It accepts input from two different computer sources and one video/audio source and projects a bright, super crisp image. Switching your presentation from a computer input to a video input, and then back to a computer input simply requires the push of a button on the remote control keypad or control panel keypad. The MP8755/MP8755L/MP8770/MP8770L Multimedia Projector offers the following features: • UHB (ultra-high bright) projection lamp • XGA resolution (3 separate 1024 x 768 LCD panels are used for the R, G and B signals) • Horizontal and vertical image inverting function • Horizontal and vertical image position control • Intelligent XGA scaling (60 Hz and 75 Hz) • Digital keystone correction • Intelligent VGA scaling • On-screen menu with eight languages • Compact size, light weight for portability • Universal power supply • RGB (computer video) output terminal • USB, Serial, PS/2 and Apple Desktop Bus (ADB) mouse emulation • IR sensor in front and rear for maximum remote control range • RS-232 control capability • Power zoom and power focus functions • Optional ceiling mount kit • 4x digital magnification • Laser pointer (remote control) • Easy to set up and use • Color balance control for data/video • Ability to display 16.7 million colors • Mounting holes for optional document camera • Two computer input connections • Plug & Play compatible • One video input connection (composite and S-video compatible) • Picture-in-Picture (PinP) • Full function remote control • Two built-in stereo speakers (1.2 watts each) • Freeze function • Kensington™ Slot K (Kensington microsaver needed) ✔ Note The MP8755/MP8755L/MP8770/MP8770L is one of the brightest portable projectors in the marketplace. The brightness of your machine will vary depending on the ambient room conditions and contrast/brightness settings. © 3M 2000 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 7 ENGLISH Section 2: Product Description VIDEO RGB LASER STANDBY/ON POSITION 1 RESET MENU FREEZE + MAGNIFY — VOLUME OFF Pin P 2 MUTE BLANK AUTO TIMER + + FOCUS ZOOM — — R E W O P U N E N O Y DB AN ST E T U C JE O TO R M O ZO M 10 + 12 M S CU FO + IN P M A L U P T P M E T R T E S E 3 O I 1 RGB IN 2 S-VIDEO IN LE B TA R O P 9 VIDEO IN CONTROL P R MP 877 0 ENGLISH 2.2 Part Identification List RGB OUT AUDIO IN R MONO AUDIO IN 1 2 R AUDIO OUT USB MD05551 MP 877 0 MD05401 4 11 8 5 7 6 EPS-129A Figure 2.1 Identifying MP8770 Parts 1. 2. 3. 4. 5. 6. 7. 8. 8 Remote control transmitter Control panel keypad a) STANDBY/ON button b) POWER, LAMP, TEMP indicators c) INPUT, MUTE, RESET buttons d) MENU buttons Stereo speakers Cooling fan exhaust Carry handle Height adjustment feet Air filter cover Projection lens 9. Remote control sensors (front/back) 10. Terminal connection panels a) S-Video, Video, Audio inputs b) RGB1 and RGB2 inputs c) RGB output d) Audio L/R input, Audio output (stereo mini-jack) e) RS-232, PS/2, Serial, ADB control f) USB port (must use USB mouse cable, optional) 11. AC input-power cord connection 12. Main power switch 3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L © 3M 2000 WHT RED ENGLISH 2.3 System Setup - Connecting Various Equipment YEL WHT RED VCR Laser Disc OUT OUT OUT OUT OUT OUT S-VIDEO IN S-VHS IN VIDEO IN IN AUDIO IN Audio Left IN Audio Right IN Audio L/R Video IN L MONO IN R MD05551 MAC OUT O I 1 RGB IN 2 S-VIDEO IN MONITOR PORT VIDEO IN CONTROL RGB OUT AUDIO IN R Laptop MONO AUDIO IN 1 2 R AUDIO OUT USB MD05551 MD05401 Power MAC PC RGB IN 1 MONITOR PORT PC CONTROL PS/2 or SERIAL PORT OUT RGB IN 2 RGB IN RGB OUT RGB OUT CONTROL AUDIO 1 AUDIO IN 1 2 IN CRT Display AUDIO OUT USB AUDIO 2 IN OUT SPEAKERS EPS-89A Figure 2.2 Cable Connections Caution Turn power off to all devices before making connections. Never plug anything into the projector or computer while any device is in operation. The MP8755/MP8755L/MP8770/MP8770L must be powered down when making connections. The mouse emulation may not work if the unit is not powered down before the mouse cable connections are made. © 3M 2000 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 9 ENGLISH 2.3 System Setup - Connecting Various Equipment (continued) Apple™ Desktop Mouse - The Macintosh operating system should recognize the MP8755/MP8755L/MP8770/ MP8770L as a mouse without any drivers being loaded. VirtualMouse for PC Computer - For IBM™ compatible computers, the operating systems will need to be set to “Serial Mouse,” “PS/2 Mouse,” or “USB Mouse” to recognize the projector as a mouse pointer device. Change mouse driver information to “Serial Mouse,” “PS/2 Mouse,” or “USB Mouse.” a) Windows™ 95/Windows™ 98 - Click “Start;” select “Settings;” select “Control Panel.” Click on “Mouse;” select the “General” tab; (see what driver is currently loaded and make note of it); select “Change;” select “Show all devices;” (make note of the current Manufacturer and Model); select “Standard Mouse Type” for Manufacturer; then select “Standard Serial Mouse,” “Standard PS/2 Mouse,” or “USB Mouse.” Click OK to change and apply the new driver. Restart Windows if prompted. USB mouse emulation is not supported in all versions of Windows 95. b) Windows™ 3.1 - From “Program Manager” click “Main;” then click “Windows Setup,” (make note of what the current mouse driver is). Click “Options;” then “Change Systems Settings.” Choose “Mouse.” It should be listed as “Microsoft or IBM PS/2.” USB mouse emulation is not supported in Windows 3.1. ✔ Note For proper mouse operation, always turn the projector power on first and then power up the computer. For some laptop computers you may need to disable the internal pointing device (IPD). This is done through the BIOS level set up of the particular machine, or it could be listed in a “Utilities” program group, i.e., “Toshiba Utilities™,” or “Thinkpad Features™.” 10 3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L © 3M 2000 ENGLISH 2.4 Remote Control Transmitter Identification INPUT LASER Press the VIDEO or RGB button to select the input source. Press again to select the next source. Press and hold down button to project laser pointer. STANDBY/ON Set main power switch to ON. Press STANDBY/ON button to begin projection mode (lamp on) or press and hold button for 1 second to switch to standby mode (lamp off). VIDEO RGB LASER STANDBY/ON POSITION POSITION∗ Press button then use DISC PAD to move image (RGB signal only) up/down or left/ right. RESET∗/RIGHT MOUSE BUTTON DISC PAD∗/LEFT MOUSE BUTTON For menu screens, press DISC PAD to select menu items. For non-menu screens, press DISC PAD for mouse shift or left mouse button function. RESET MENU FREEZE MAGNIFY – VOLUME PinP VOLUME∗ BLANK AUTO MUTE Press up to increase or down to decrease speaker volume. TIMER MUTE∗ Press button to turn the mute function (speaker sound) ON/OFF. MAGNIFY∗ PinP∗ Press the PinP button to display a video signal as a small picture-in-picture screen in the corner of an RGB display. Press it again to enlarge the picture-in-picture screen size. Press it a third time to exit the PinP screen and turn the function OFF. The position of the picture-in-picture screen can be controlled by pressing the POSITION button or from the Image menu. (Both RGB and Video signals must be present for the picture-in-picture screen to operate.) BLANK ON Press button to turn ON/OFF the screen blanking function. FOCUS Press (+) or (-) to adjust the image sharpness. © 3M 2000 Press button to turn ON/OFF the freeze image function. OFF MENU∗ Press the MAGNIFY (+) to enlarge the center of the display image. Press again to enlarge image to maximum of 4X magnification. Press MAGNIFY (-) to reduce the display image size. Press OFF to return to normal image size. (Can be used with the POSITION button to select the image area being magnified.) For menu screens, press button to return to initial settings. For non-menu screens, press button for right mouse button function. FREEZE∗ + Press the remote control button to display the menu screen. CAUTION To prevent injury to eyesight, do not point laser beam at other persons or look directly into laser beam. + + FOCUS ZOOM – – TIMER∗ Press button to turn the menu screen timer ON/OFF. The timer does not display when the blank function is active. ZOOM Press (+) to increase or (-) to decrease the size of the displayed image. AUTO∗ Press the AUTO button to activate the auto sync function. The message “AUTO IN PROGRESS” will display for several seconds as the projector adjusts the V. POSIT, H.POSIT. H.PHASE, & H. SIZE settings. The Auto Sync function will not operate under the following conditions: • Initial screen message NO INPUT IS DETECTED or SYNC IS OUT OF RANGE is displayed. • Freeze and Magnify functions have not been turned off prior to pressing AUTO button. • Software application running on your computer is not set to maximum ∗ This button will not function if the screen size prior to pressing AUTO message "NO INPUT IS DETECTED" or button. "SYNC IS OUT OF RANGE" is displayed. 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 11 Section 3: Basic Operations ENGLISH 3.1 Projector Startup — ZOOM + — FOCUS + MUTE INPUT O I MENU STANDBY ON LAMP POWER TEMP P M LA P M TE RE ER W PO NU T T FOC US + MU PO RT AB LE SE INPU ME STAN DB Y ON + RESET TE ZO OM OJE CT OR MP 877 0 PR MP 877 0 EPS-130A Figure 3.1 Projector Controls 1. Make all cable connections and line hookups with the power off. 3. Press the STANDBY/ON button STANDBY ON O I 2. Turn on the projector’s MAIN POWER SWITCH . The POWER indicator will light up orange. . The POWER indicator blinks (green) and then lights (green). The POWER indicator will blink green during warm-up and lamp ignition. When power is turned off, there is a 60 second reset period before the STANDBY/ON button will function again. 4. Adjust the screen size by pressing the ZOOM button. – + 5. Adjust the focus by pressing the focus button. – + Press any other button to make the focus screen disappear. 6. Turn on all connected equipment. Refer to Section 2.3. ZOOM FOCUS 7. Press the INPUT button INPUT on the projector or the INPUT SELECT (VIDEO or RGB) button on the remote to select the source of the signal to be projected on the screen. The selected signal input is displayed at the bottom right of the screen. The display will show the last selected input source before power was turned off. 3.2 Projector Shutdown 1. Press and hold the STANDBY/ON button STANDBY ON for 1 second. The POWER indicator blinks orange and the lamp turns 2. Turn off the projector’s MAIN POWER SWITCH O I off. After approximately 1 minute, the fan stops and the indicator stays orange. . Caution Do not turn off the MAIN POWER SWITCH before pressing the STANDBY/ON button. After the STANDBY/ON button is pressed, the fan rotates for about 1 minute to cool the projector. 3. Attach lens cap to protect projection lens. 4. Disconnect cables if moving projector to new location. 12 3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L © 3M 2000 Section 4: Adjustments and Functions ENGLISH 4.1 How To Use Height Adjustment Feet Adjust the image elevation using the height adjustment feet at the front of the projector. 1. Raise the front end of the projector so the feet are not touching the tabletop. 2. Push the lock button to unlock the foot. 3. Extend or retract each foot to the desired height. 4. Release the lock button to lock the foot into position. 5. For fine adjustments, rotate each foot. Caution Do not unlock the foot adjusters if the projector is not supported. If the foot adjusters do not lock completely, turn the foot adjusters slightly before locking. Front View MP8770 Side View RGB IN 1 2 S-VIDEO IN O I VIDEO IN CONTROL RGB OUT AUDIO IN R MONO R AUDIO IN 2 1 AUDIO OUT USB MD05551 MD05401 0-9 O Figure 4.1 Height Adjustment © 3M 2000 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 13 ENGLISH 4.2 Plug & Play Function This projector is VESA DDC 1/2B compatible. Plug & Play is possible by connecting to a computer that is VESA DDC (Display Data Channel) compatible. Plug & Play is a system configured with peripheral equipment including a computer and display, and a compatible operating system. ✔ Note Use the RGB cable included with this projector when using Plug & Play. With other cables, pins (12) - (15) are sometimes not connected (effective only for RGB1). 4.3 Freeze Function The Freeze function is used to display (freeze) a single frame of the image being projected. ✔ Note The FREEZE function will turn off during the operation of the MENU, FOCUS, PinP, VOLUME, MUTE, BLANK, TIMER, AUTO or POSITION functions. 4.4 Magnify Function The Magnify function is used to enlarge a portion of the display image. Press the MAGNIFY (+) button to magnify the center of the displayed image. Press again to magnify to 4x. Press the MAGNIFY (-) button to reduce image size. Press OFF to return to normal image size. To move the display area being magnified, press the POSITION button, then use the DISC PAD to move the magnified area up, down, left or right. ✔ Note To return to normal display, press the MAGNIFY OFF button. The MAGNIFY function will turn off during the operation of the KEYSTONE or AUTO functions. 4.5 Picture-in-Picture The PinP button on the remote control is used to display a video signal image in the RGB signal image. Press the PinP button to display the PinP screen (small size). Press again to increase the screen size (maximum size screen). Press a third time to exit the function and remove the PinP screen. [small screen size ➔ maximum screen size ➔ OFF] Both RGB and Video signals must be present for the Picture-in-Picture function to operate. 1. Select RGB1 or RGB2 input. 2. Start the video input source. 3. Press the PinP button on the remote control to display a small PinP screen in the corner of the projector image. Press the PinP button again to enlarge the size of the screen display to maximum. 4. Press the POSITION button on the remote control to change the location of the PinP screen. The position of the Picture-in-Picture screen can also be changed from the Image menu. 5. Press the PinP button a third time to exit the function and remove the PinP screen from the projector image. 14 3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L © 3M 2000 ENGLISH 4.6 Menu Navigation MENU Figure 4.2 Menu Button 1. Press any MENU button on projector or remote control MENU button. On-screen menus are displayed on the screen. 2. Select the menu to be adjusted using the MENU ( ) buttons or DISC PAD. Selected Menu is highlighted. 3. Select the item to be adjusted using the MENU ( ) buttons or DISC PAD. Highlighted items may be adjusted. ✔ Note Separate settings are provided for the VIDEO, RGB1 and RGB2 input terminals. Adjustments are saved after power off. SETUP Factory Default Setting: INPUT IMAGE OPT. VOLUME To reset a single item from SETUP menu: BRIGHT CONTRAST 1. Select the adjustment item (bright, contrast...). SHARPNESS COLOR 2. Press the RESET button. Only the selected item resets. TINT COLOR BAL R COLOR BAL B Figure 4.3 Default Settings © 3M 2000 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 15 4.7 SETUP ENGLISH The SETUP sub-menu is used to adjust and move the image position. The projector will display either the RGB (Figure 4.4) or Video (Figure 4.5) menu according to the input source being projected. RGB Signal Input SETUP INPUT IMAGE VOLUME BRIGHT CONTRAST V POSIT H POSIT H PHASE H SIZE COLOR BAL R COLOR BAL B Video Signal Input OPT. SETUP INPUT IMAGE OPT. VOLUME BRIGHT CONTRAST 121 57 7 800 SHARPNESS COLOR TINT COLOR BAL R COLOR BAL B Figure 4.4 RGB Signal Figure 4.5 Video Signal Adjustment Item VOLUME Decrease BRIGHT (BRIGHTNESS) CONTRAST Increase Dark Bright Lower Higher SHARPNESS Soft Sharp COLOR Less More TINT Red Green V.POSIT (V.POSITION) Moves the picture up or down.* H.POSIT (H.POSITION) Moves the picture left or right.* H.PHASE Decreases the picture flicker.* H.SIZE Widens or Narrows the horizontal size of picture.* COLOR BAL R Less red More red COLOR BAL B Less blue More blue *Auto Sync Function: Press the AUTO button on the remote control to engage the automatic sync function. The message “AUTO IN PROGRESS” will display for several seconds as the projector adjusts the V. POSIT, H.POSIT. H.PHASE, & H. SIZE settings. Auto Adjust can also be executed using the operation buttons of the main unit. Hold down the RESET button and press the input switch (INPUT) button. • • • • • 16 ✔ Note TINT cannot be adjusted with a PAL, SECAM, N-PAL or M-PAL video signal input. TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input. V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with a VIDEO signal input. Menu operation is not possible during freeze functions. Displaying the Setup menu will cancel the magnify and freeze functions. 3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L © 3M 2000 4.8 INPUT ENGLISH The INPUT sub-menu is used to select the RGB or video input source. The RGB values are shown in figure 4.6. The VIDEO values are shown in Figure 4.7. SETUP INPUT RGB VIDEO IMAGE OPT. fH: 48.3 fV: 60 KHz Hz Figure 4.6 Input Menu - RGB Adjustment Area © 3M 2000 SETUP INPUT IMAGE OPT. RGB VIDEO AUTO NTSC PAL SECAM NTSC4.43 M-PAL N-PAL Figure 4.7 Input Menu - Video Value RGB Displays the following RGB inputs: fH: horizontal sync frequency fV: vertical sync frequency Video Selects the VIDEO signal format Auto, NTSC, PAL, SECAM, NTSC 4.43, M-PAL, N-PAL 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 17 4.9 IMAGE ENGLISH The IMAGE sub-menu is used to change the image characteristics. SETUP INPUT IMAGE OPT. SETUP KEYSTONE KEYSTONE MIRROR MIRROR BLANK BLANK START UP START UP P.IN P. P.IN P. SETUP INPUT IMAGE OPT. KEYSTONE MIRROR BLANK START UP INPUT IMAGE OPT. WHITE BLUE BLACK BLANK START UP P.IN P. INPUT IMAGE OPT. SETUP KEYSTONE MIRROR MIRROR BLANK P.IN P. OPT. MIRROR KEYSTONE START UP IMAGE KEYSTONE NORMAL H: INVERT V: INVERT H&V: INVERT P.IN P. SETUP SETUP INPUT INPUT IMAGE OPT. BLANK TURN ON TURN OFF START UP P.IN P. Figure 4.8 Image Adjustment Screens Adjustment Screen 18 Value KEYSTONE Reduce distortion at bottom of image. MIRROR Inverts the picture horizontally or vertically. H: INVERT Inverts the picture horizontally. V: INVERT Inverts the picture vertically. H&V: INVERT Inverts the picture horizontally and vertically. BLANK Selects the blank color. STARTUP Enable / disable startup screen When canceled, the background color will change to blue. P. IN P. Change the picture in picture screen display position. Reduce distortion at top of image. 3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L © 3M 2000 4.10 OPT. SETUP INPUT IMAGE ENGLISH The OPT. sub-menu allows you to control communication function. OPT. COM. SPEED COM. BITS TIMER LANGUAGE AUTO OFF SYNC ON G SETUP INPUT IMAGE COM. SPEED COM. BITS TIMER LANGUAGE SETUP OPT. SETUP LANGUAGE AUTO OFF SYNC ON G SYNC ON G IMAGE OPT. OPT. 7N1 8N1 TIMER AUTO OFF INPUT IMAGE COM. BITS SETUP INPUT COM. SPEED COM. SPEED COM. BITS COM. BITS TIMER IMAGE OPT. TIMER 10 min. LANGUAGE SETUP INPUT COM. SPEED 1200 2400 4800 9600 19200 LANGUAGE AUTO OFF AUTO OFF SYNC ON G SYNC ON G INPUT IMAGE OPT. SETUP INPUT COM. SPEED COM. SPEED COM. BITS COM. BITS TIMER TIMER LANGUAGE LANGUAGE AUTO OFF SYNC ON G ENGLISH FRANCAIS DEUTSCH ESPANOL ITALIANO NORSK NEDERLANDS JAPANESE IMAGE OPT. AUTO OFF 0 min. SYNC ON G TURN ON TURN OFF EPS-137A Figure 4.9 OPT Adjustment Screens Adjustment Screen Value Default COM. SPEED Selects the data speed of transmission. 1200 COM. BITS Selects the data format of transmission. 7N1... 7 data-bits, No parity, 1 stop bit. 8N1... 8 data-bits, No parity, 1 stop bit. 7N1 TIMER Sets the timer ( 0-99 minutes). — LANGUAGE Selects the language on-screen menu. (English, French, German, Spanish, Italian, Norwegian, Netherlands, Japanese) — AUTO OFF Selects how long projector will stay on in minutes, if no input is detected. Select 0 to disable this function. — SYNC ON G Sets the SYNC on G function to ON/OFF (supports older monitors). © 3M 2000 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 19 5.1 Cleaning the Air Filter ✔ Note Clean the air filter about every 50 hours. If air is restricted due to dust accumulation on filter, the projector may shut down due to overheating. 1. Turn off the MAIN POWER SWITCH of the projector and disconnect power cord (1). Let cool for 20 minutes. 2. Push tab (2) and remove the air filter cover (3) from the front of the projector. 3. Lift retainer wire (4) and carefully remove foam air filter (5). 4. Vacuum (6) dust and dirt from filter. 5. Re-install air filter and replace air filter door. 1 P M E T T P M A L SE R E W O P INP ME MU UT FOC US TE ZO OM P O R TA B LE 0 77 R P8 JECTO M PRO NU + STA ND BY ON + Power RE ENGLISH Section 5: Maintenance 3 MP 877 0 4 6 2 5 EPS-132A Figure 5.1 Remove Air Filter 20 3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L © 3M 2000 Section 6: Lamp ENGLISH 6.1 Lamp The following symptoms may indicate a lamp in need of replacement: • • LAMP indicator lights up red. “CHANGE THE LAMP” message appears on the screen. ✔ Note This lamp contains mercury. Consult your local hazardous waste regulations and dispose of this lamp in a proper manner. 6.2 Display Lamp Operation Hours To determine the lamp operation hours, follow these steps: 1. While the projector is running, press and hold the TIMER button on the remote control for 3 seconds. 2. The operating time of the lamp will be displayed. The message “CHANGE THE LAMP, AFTER REPLACING LAMP RESET THE LAMP TIMER” will appear after the lamp operating hours have reached the end of the normal lamp life. The message “POWER WILL TURN OFF AFTER 20 HOURS” will appear when 20 or less lamp hours remain. The number of hours left until shut down will decrease until 0 hour is reached, then power will be turned off. ✔ Note After normal lamp operating time has expired, the projector will only run for 10 minute intervals when restarted until the lamp is replaced and the lamp timer is reset. The message “CHANGE THE LAMP” will blink at projector start up to remind you to change the lamp. 6.3 Reset Lamp Hours © 3M 2000 1. To display the total lamp hours, press and hold for 3 seconds, the RESET button on the projector or Timer button on the remote control. 2. To reset the lamp timer, press the RESET button on the projector or MENU button on the remote while the total lamp hours are displayed. Use the arrow button on the projector or the DISC PAD to select 0 (or CANCEL). 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 21 6.4 Replacing the Lamp ENGLISH WARNING To reduce the risk of electrical shock, always turn off projector and disconnect power cord before changing lamp. Caution To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the lamp. To reduce the risk of cuts to fingers and damage to internal components, use caution when removing lamp glass that has failed and shattered into sharp pieces. ✔ Note For maximum lamp life, do not apply shock, handle or scratch the lamp glass when it is hot. Also, do not use an old or previously used lamp as a replacement lamp. 1. Remove lamp access door: The lamp access door is located on the bottom of the machine. Use a screwdriver to unscrew the cover retaining screw (1) and gently remove the cover (2) and set it aside. 2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws. (3) ✔ Note All lamp module screws must be loosened. These screws are self-containing screws that cannot be removed from the lamp module or access door. 3. Remove lamp module: Carefully slide the lamp module out (4) using steady pressure. Caution To reduce the risk of cuts to fingers from sharp metal fittings and/or decreasing image quality by touching the lens, do not insert hand into the empty lamp compartment when the lamp has been removed. 4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated. Tighten the lamp module retaining screws (3) to secure the lamp module in place. Insert the hinge tabs on the bottom of the lamp access door, then close and tighten the retaining screw (1) to secure the door. ✔ Note Reset the lamp operation hours. See Section 6.3 for details. 1 2 4 3 3 EPS-98A Figure 6.1 Lamp Module 22 3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L © 3M 2000 Section 7: Troubleshooting Symptom Cause ENGLISH 7.1 Symptom/Solution Table Solution Power cannot be turned on. • The main power is not turned on. • The power cord is disconnected. • 60 seconds have not elapsed since the power was turned off. • Turn on the MAIN POWER SWITCH. • Insert the power cord into an AC socket. • Wait 60 seconds before turning on power. No picture and sound. • The setting of the input source is not correct. • RGB/Video/Audio wiring to projector is not correct. • Set the correct input using the input select button of the projector or the remote control. • Connect the cable to correct input/output source. Sound is heard with no picture. • RGB/Video/Audio wiring to projector is not correct. • The brightness is set fully to dark. • Lens cap is on. • Connect the cable to correct input/output source. • Audio wiring to projector is not correct. • The volume is set to minimum. • The unit is muted. • PinP is on and audio is switched to VIDEO mode. • Connect the cable to correct input/output source. Color is weak and tint is incorrect. • The color and tint have been adjusted incorrectly. • Adjust the color and tint correctly. Picture is dark. • The brightness and contrast has not been adjusted correctly. • The lamp needs to be replaced. • Adjust the brightness and contrast correctly. Picture is not clear. • Projector is out of focus. • Adjust the focus and H PHASE. LAMP indicator lights red. • Lamp will not ignite. • Turn off power and let cool for 20 minutes, then restart. • If problem persists call your dealer. • Temperature inside projector is too hot. • Clear blocked ventilation holes. • Clean air filter. • Lamp access door on bottom of case is open. • Ensure lamp access door is closed. • The lamp operating hours have reached maximum operating hours. • Replace the lamp. • Cooling fan not operating. • Contact your dealer. Picture is displayed with no sound. LAMP indicator blinks red. TEMP indicator blinks red. © 3M 2000 • Press the MENU button and increase BRIGHTNESS. • Remove lens cap. • Press the VOL button to increase Volume. • Press the MUTE button. • Press VOLUME and move DISC PAD to switch to audio input. • Replace the lamp with a new one. 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 23 ENGLISH 7.2 Message/Solution Table Error Message Displays Cause Solution NO INPUT IS DETECTED. The projector is not detecting a signal. Check cable connections to input device. Input device not connected to this input mode, switch to next mode. SYNC is out of Range. The horizontal frequency of input signal exceeds projector capability. Switch projector to correct resolution. See Appendix A.5 Nearing end of normal lamp operation CHANGE THE LAMP. CALL A MAINTENANCE time. PERSON. CHANGE THE LAMP. CALL A MAINTENANCE PERSON. THE POWER WILL TURN OFF AFTER *hr. Remaining lamp operation time = 20 hours or less. CHANGE THE LAMP. (Blinking message) Normal lamp operating time has expired. Safety feature shuts projector down after 10 minutes. 24 Change the projector lamp and reset the lamp operation hours to zero. Change the projection lamp and reset the lamp operation hours to zero. *Indicates number of hours until power turns off automatically. Change the projector lamp and reset the lamp operation hours to zero. 3M ™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L © 3M 2000 Section 8: Accessories ENGLISH 8.1 Service Information For product information, product assistance, service information, or to order accessories, please call: In U.S. or Canada: 1-800-328-1371 In other locations, contact your local 3M Sales office. Accessories Part Number Ultra-high performance lamp module, 190 W . . . . . . . . . . . . . . . . . . . . . Power cord (US) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power cord (UK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Power cord (Eu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGA cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MAC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-conductor video/audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serial mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS/2 mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ADB mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stereo mini jack cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Not Included with Basic Packet Ceiling mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjustable height suspension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shipping case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Soft carry case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RS-232 control cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Document Camera - 120 VAC 60 Hz (optional) . . . . . . . . . . . . . . . . . . . Document Camera - 220 VAC 50 Hz (optional) . . . . . . . . . . . . . . . . . . . 78-6969-8919-9 DY-0205-1356-9 DY-0205-1355-1 DY-0205-1354-4 78-8118-3401-5 78-8118-3308-2 78-8118-3238-1 78-8118-3234-0 78-8118-8107-3 78-8118-8105-7 78-8118-8016-5 78-8118-8104-0 78-8118-8246-9 Part Number 78-6969-8748-2 78-6969-8312-7 78-6969-8584-1 78-6969-8585-8 78-8118-3312-4 78-8118-8186-7 78-6969-8578-3 78-6969-8724-3 How to Order Please order these parts through your dealer, or contact 3M Customer Service at the following number: In U.S. or Canada: 1-800-328-1371 In other locations, contact your 3M Sales office. ---------------------------------------------------------------------------------------------------------------------------------------The contents of this manual are subject to revision without prior notice. 3M assumes no responsibility for the infringement of special rights of a third party or other rights that may arise out of the information contained in this manual. Reproduction of this manual in any form without prior permission is strictly prohibited. 3M will replace the manual if any pages are missing or collated incorrectly. © 3M 2000 3M™ Multimedia Projector MP8755/MP8755L/MP8770/MP8770L 25 Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly set forth in a written agreement signed by an authorized officer of 3M. Warranty and Limited Remedy. This product will be free from defects in material and manufacture for a period of two years from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Limitation of Liability. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Let us help you make the most of your next presentation. We offer everything from presentation supplies to tips for better meetings. And we're the only transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy reference and free product samples, call us toll-free in the continental United States and Canada, 24 hours a day, or visit our Internet Website. 3M Austin Center Building A145-5N-01 6801 River Place Blvd. Austin, TX 78726-9000 QR46271 3M Canada P.O. Box 5757 London, Ontario N6A 4T1 3M Mexico, S.A. de C.V. Apartado Postal 14-139 Mexico, D.F. 07000 Mexico 3M Europe Boulevard de l'Oise 95006 Cerge Pontoise Cedex France Printed on 50% recycled wastepaper, including 10% post-consumer Litho in USA © 3M 2000 78-6970-9041-9 Rev. B