Transcript
Approved and ready for take off © 2006 IRWIN Industrial Tools, Snips New Product – Key Facts Product: Application: Offset Snips 20SL & 20 SR Two versions of Offset Snips. 20SL cuts straight and left cur ves. 20SR cuts straight and right cur ves. Cold-formed blades ■ Cold-formed blades are 44% stronger than hot forged blades and requires 25% less cutting force because of more accurate blade tolerances. Offset blades ■ The main feature of the offset blades is that during the cutting process your hand will be kept safely above the work. Compound leverage ■ Compound leverage means reduced pressure and faster and easier cutting. Long life spring Long life spring for increased durability and reliability. ■ Safety latch ■ Easy push-up safety latch allows one-handed operation. Extra strong splines 2,66 mm alloy steel spines provide increased rigidity and less flexing. ■ Soft grips Over-molded Pro-touch soft grips provide superior comfort. Resists twisting and will not come off. ■ 20SR Green grips for straight cuts and tight curves to the right Cutting Capacity SKU 20SL & 20SR Mild Steel 1,19mm Stainless steel 0,84mm Length of cut 3,02cm Reduced hand span ■ 10% reduced hand span increases control and decreases fatigue. 20SL Red grips for straight cuts and tight curves to the left IRWIN Offset Snips 20SL & 20 SR Part # 10504315 N 10504316 N Description Off-Set Snip 20SL, Straight, Angles & Left Cur ves Off-Set Snip 20SR, Straight, Angles & Right Cur ves EAN 5706915043150 5706915043167 Pack Type Hangcard Hangcard Shelf Pack 5 5
