Download Einhell BT-CH 1000
Transcript
GB TOOLS 2014/2015 WELL DONE. Our Philosophy GB Products. Well done. We have grouped our 50 years of experience in developing and manufacturing high-performance equipment into two basic product lines. All the Red products represent our accumulated skills in product design and development. This is where exclusive, ergonomical design combines with practical functions, premium craftsmanship and good service for improved performance and better quality to meet the most demanding customer requirements. The Blue line represents our entry-level products, which are characterized by their optimized utility at closely calculated prices. All our products provide performance that makes do-it-yourself projects fun as well as combine high functionality with safety and ease of use. Performance and quality are well balanced and offered at prices that put a smile on everyone’s face. Einhell. Well done. International Einhell. Well done. The Einhell group employs over 1400 people in more than 50 countries around the world. With an annual sales volume that exceeds 10 million electric tools and machines, we are one of the most capable trade partners on a domestic as well as international level. Our strength in the market allows us to achieve outstanding value with each of our products, which are tested by experts on site to ensure quality and safety. In addition, our development work in Germany is subjected to a thorough testing and inspection program. We demonstrate our high performance standards continuously in the form of practiceproven, sophisticated brand products. Einhell. Well done. Jan Teichert Chief Financial Officer 2 Dr. Markus Thannhuber Chief Technical Officer Andreas Kroiss Chairman of the Board of Directors Tools Handheld electric tools Screwing 5 Drilling / Hammer drilling 7 Mixing 8 Cutting 9 Milling / Planing / Grinding 10 Sawing 12 Other tools 13 Stationary Tools Woodworking technology 14 Compressed air technology 16 Welding technology 23 Metalworking technology 27 Lifting equipment 30 Firewood Cutting 33 Power generation 34 Service 36 Einhell Germany AG recommends accessories from Note: For safe handling of the products please refer to the instructions in the operating manual. 3 4 CORDLESS SCREWDRIVER CORDLESS DRILL BT-SD 4,8 F BT-CD 14,4 2B Nm R/L NiCd n0 = 200 min-1 3-5 h 4.8 V / 0.6 Ah 230 V ~ 50 Hz Pivot joint | Lamp | Clockwise / counter-clockwise switch | Charging supply unit | 28 screwdriver bits | 8 socket wrench sockets | Holder for wrench sockets | Magnetic bit holder SCREWING 0.4 / 1.2 kg 5 310 x 160 x 70 mm 2 x NiCd 14.4 V / 1.3 Ah n0 = 0 - 550 min-1 21 + 1 Steps Electronic Ø max. 10 mm R/L 3-5 h 230 V ~ 50 Hz BIT SET Clockwise / counter-clockwise switch | Quick stop | Keyless chuck | Speed control electronics | Additional battery pack 1.4 / 3.2 kg 5 Bit set: 23 pieces 355 x 265 x 95 mm Article number 45.107.02 4 006825 545876 Article number 45.133.00 4 006825 538250 Article number 42.580.73 4 006825 573268 CORDLESS DRILL CORDLESS DRILL CORDLESS DRILL CORDLESS IMPACT DRILL BT-CD 18 BT-CD 18 2B BT-CD 18 1h BT-CD 24i Nm Nm 1 x NiCd 18 V / 1.3 Ah n0 = 0 - 550 min 21 + 1 Steps Electronic Ø max. 10 mm R/L -1 3-5 h 230 V ~ 50 Hz Clockwise / counter-clockwise switch | Keyless chuck | Speed control electronics | Quick stop 1.5 / 2.7 kg 5 280 x 285 x 96 mm Article number n0 = 0 - 550 min 21 + 1 Steps Electronic Ø max. 10 mm R/L 3-5 h 230 V ~ 50 Hz 45.133.30 Clockwise / counter-clockwise switch | Keyless chuck | Speed control electronics | Quick stop | Additional battery pack 1.5 / 3.1 kg Article number 5 Nm n0 = 0 - 350 min 21 + 1 Steps n0 = 0 - 1100 min-1 -1 Ø max. 10 mm 1h 230 V ~ 50 Hz 45.133.40 Electronic Clockwise / counter-clockwise switch | Keyless chuck | Speed control electronics | Quick stop | 2-speed gearing | 1h charger | Additional battery pack 1.6 / 4.3 kg Article number 5 21 + 1 +1 Steps 1h 230 V ~ 50 Hz Ø max. 13 mm Clockwise / counter-clockwise switch | Keyless chuck 13 mm | Speed control electronics | 2-speed gearing | Battery capacity indicator | LED lamp | Impact drill function | Additional battery pack | 1 hour charger | Additional handle | 2 bits (50 mm) 2.4 / 6.0 kg 3 370 x 310 x 105 mm 45.133.10 4 006825 538267 Packaging unit 2 x NiCd n0 = 0 - 350 min 24 V / 1.3 Ah n0 = 0 - 1100 min-1 -1 R/L 355 x 265 x 95 mm 4 006825 541236 Packing dimensions 2 x NiCd 18 V / 1.3 Ah Electronic 280 x 240 x 87 mm 4 006825 541229 Weight net / gross Nm 2 x NiCd 18 V / 1.3 Ah -1 Article number 45.132.23 4 006825 545913 5 CORDLESS SCREWDRIVER CORDLESS DRILL CORDLESS DRILL BT-SD 3,6/1 Li BT-CD 10,8/1 Li Kit BT-CD 14,4 Li Lithium-Ion Batteries from Einhell Small and easy to handle Powerful even after prolonged storage, no self-discharge Nm Li-Ion n0 = 200 min-1 3.6 V / 1.3 Ah No memory effect With active cell monitoring for maximum safety and battery life Nm 8 + 1 Steps 3-5 h 230 V ~ 50 Hz R/L 1 x Li-Ion n0 = 0 - 600 min-1 10.8 V / 1.4 Ah Electronic Clockwise / counter-clockwise switch | Swivel handle | 9 torque settings | Bit mount with lock | LED lamp | Battery capacity indicator | Charging supply unit | Soft grip | 4 bits | Holster bag | Blisterpackaging 0.4 / 0.8 kg 8 210 x 260 x 65 mm Ø max. 10 mm Nm 15 + 1 Steps 12 Nm 3-5 h 230 V ~ 50 Hz R/L Electronic Clockwise / counter-clockwise switch | Quick stop | Spindle-lock | Single sleeve quick-change drill chuck | Speed control electronics | LED lamp | Battery capacity indicator | Softgrip | Magnetic screw holder | Incl. 23 pcs. bit set 1.2 / 2.2 kg 5 45.133.85 4 006825 559057 Article number 45.133.49 TOOL KIT BT-CD 10,8/3 Li BT-DY 720 E BT-TK 10,8 Li STOP 3 AUTO STOP Nm 2 x Li-Ion n0 = 0 - 350 min 19 + 1 Steps 3-5 h 14 Nm 10.8 V / 1.3 Ah n0 = 0 - 1200 min-1 230 V ~ 50 Hz Ø max. 10 mm R/L 2-speed gearing | Clockwise / counter-clockwise switch | Quick stop | Spindle-lock | Single sleeve quickchange drill chuck (Jacobs) | Speed control electronics | Additional battery pack | Battery capacity display | Soft grip 1.2 / 2.0 kg 6 245 x 245 x 67 mm Article number Weight net / gross 230 V ~ 50 Hz 720 W 6.35 mm 1/4 " Electronic n0 = 0 - 2200 min -1 45.133.77 n0 = 10000 min-1 Electronic speed control with speed selector | Clockwise / counter-clockwise switch | Metal gear housing | Tool chuck for 1/4" (6.35 mm) Internal hexagon | Adjustable depth stop | Auto-start-stop-drive 2.0 / 2.2 kg Article number 3-5 h 2 x Li-Ion 230 V ~ 50 Hz 10.8 V / 1.3 Ah max. 12 mm 10 330 x 220 x 75 mm 4 006825 564037 6 45.133.05 2x Nm -1 Electronic 5 4 006825 560893 START / STOP AUTOMATIC AUTO START Clockwise / counter-clockwise switch | Quick stop | Spindle-lock | Single sleeve quick-change drill chuck | Speed control electronics | LED lamp | Battery capacity indicator | Soft grip | Magnetic screw holder Article number 4 006825 584547 DRYWALL SCREW GUN 2 R/L 235 x 230 x 66 mm CORDLESS DRILL 1 Ø max. 10 mm 1.3 / 1.6 kg 275 x 275 x 90 mm Article number 1 x Li-Ion n0 = 0 - 600 min-1 15 + 1 Steps 3-5 h 15 Nm 14.4 V / 1.4 Ah 230 V ~ 50 Hz n0 = 20000 min-1 2.7 ° Cordless multitool with plunge cut saw blade for wood | Grinding / sanding attachment and scraper | Supplied with 2 rechargeable batteries 1.7 / 2.8 kg 42.599.00 Article number 5 44.192.07 4 006825 580563 Packaging unit R/L Ø 10 mm 16 Nm n0 = 0 - 500 min-1 Cordless drill with soft grip | LED light | Torque adjustment | Level for horizontal working 340 x 290 x 85 mm 4 006825 537710 Packing dimensions 80 x 80 x 80 mm 11 + 1 Steps DRILLING / HAMMER DRILLING IMPACT DRILL IMPACT DRILL BT-ID 550 E BT-ID 710 E 230 V ~ 50 Hz 550 W 230 V ~ 50 Hz 710 W 10 mm 13 mm 10 mm 13 mm n0 = 0 - 2700 min-1 n0 = 0 - 43200 min-1 25 mm Ø max. 13 mm Soft grip | Clockwise / counter-clockwise switch | Keyless chuck | Metal depth stop | Additional handle | Speed control electronics with speed preselection 1.8 / 2.1 kg 10 290 x 235 x 73 mm 25 mm Ø max. 13 mm Soft grip | Clockwise / counter-clockwise switch | Keyless chuck | Metal depth stop | Additional handle | Speed control electronics with speed preselection 2.1 / 2.3 kg 10 307 x 241 x 77 mm Article number 42.597.80 4 006825 538274 BIT SET n0 = 0 - 2700 min-1 n0 = 0 - 43200 min-1 Article number 42.597.90 4 006825 538281 IMPACT DRILL IMPACT DRILL ROTARY HAMMER BT-ID 720 KIT BT-ID 1000 E BT-RH 900/1 HIGH QUALITY COMPONENTS POWER Bit set: 23 pieces Incl. bit / drill set Article number 42.580.73 4 006825 573268 DRILL AND BIT SET 230 V - 240 V ~ 50 Hz 720 W 10 mm 13 mm n0 = 0 - 2700 min-1 n0 = 0 - 43200 min-1 25 mm Ø max. 13 mm Quick chuck with lock-function | Drilling / hammer drilling | Right / left turn | Speed control electronics with speed preselection | Additional handle | Metal depth gauge | Incl. 65 pieces bit and drill bit set | Soft grip 2.2 / 3.8 kg 70 pieces: 25 drills: wood, metal, stone | 36 bits | 7 socket bits | Measuring tape | 1 bit adapter 4 310 x 260 x 138 mm 230 V ~ 50 Hz 1010 W 10 mm 13 mm n0 = 0 - 3000 min-1 n0 = 0 - 48000 min-1 25 mm Ø max. 13 mm Soft grip | Clockwise / counter-clockwise switch | Key chuck | Metal depth stop | Additional handle | Speed control electronics with speed preselection 2.3 / 2.5 kg 6 305 x 235 x 77 mm 220-240 V ~ 50 Hz 900 W n0 = 850 min-1 n0 = 4100 min-1 3J 26 mm Ø 55 mm Stop Stop SDS-Plus adapter | Additional handle | Hammer stop facility | Rotation stop facility with chisel fixation | Metal depth gauge | Sturdy aluminium gear head | Overload safety clutch 4.3 / 6.0 kg 3 402 x 305 x 127 mm 1 Article number 42.580.85 4 006825 563610 Article number 42.597.65 4 006825 577822 Article number 42.598.00 4 006825 538298 Article number 42.582.35 4 006825 577006 7 ROTARY HAMMER SDS-PLUS DRILL BIT AND CHISEL SET BT-RH 1600 DEMOLITION HAMMER FLAT CHISEL HEXAGON FOR BT-DH 1600/1 BT-DH 1600/1 HIGH QUALITY COMPONENTS POWER For all rotary hammers | 12 pieces, in aluminium case: 10 drill bits (Ø 5 - Ø 16 mm), 2 chisels Hexagon 30 mm | Width 34 mm | Length 410 mm 1 1 Article number 230 - 240 V ~ 50 Hz 1600 W 32 mm Ø 68 mm n0 = 800 min-1 n0 = 3900 min-1 4J Stop Stop 42.580.90 230 V~ 50 Hz 5.6 / 7.8 kg 1600 W 4 006825 538885 n0 = 1500 min-1 43 J Adapter Hex 30 mm SDS-PLUS DRILL SET 2 14.7 / 21.7 kg For all rotary hammers 10 pcs. drills (Ø 5 - Ø 16 mm, length 110 - 400 mm) 42.584.75 4 006825 577044 4 006825 565720 Hexagon chuck, 30 mm | Additional handle | Incl. pointed chisel, flat chisel | For heavy demolition works 1 Hexagon 30 mm | Length 410 mm 690 x 350 x 170 mm 1 Article number 41.390.72 POINTED CHISEL HEXAGON FOR BT-DH 1600/1 SDS-Plus adapter | Vibration absorbing handle | Rotation stop facility with shiftable chisel fixation | Hammer stop facility | Metal depth gauge | Additional handle with locking device | Overload safety clutch 440 x 365 x 130 mm Article number 1 Article number 42.580.94 Article number 41.390.67 4 006825 582307 4 006825 567731 PAINT AND MORTAR MIXER PAINT AND MORTAR MIXER BT-MX 1100 E BT-MX 1400 E Article number 41.390.73 4 006825 565737 MIXER SET HEXAGON Hexagon connection, length 550 mm | 3 pieces (paint Ø 60 mm, bitumen Ø 80 mm, mortar Ø 100 mm) 1 Article number 230 V ~ 50 Hz 13 mm 1050 W Ø max. 13 mm n0 = 0 - 550 min -1 Ø 58 mm L = 530 mm R/L M 14 Soft grip | Speed control electronics with speed selection | Clockwise / counter-clockwise switch | Key chuck | Incl. spiral mixing tool | Additional handles | Can also be used as power drill 3.3 / 3.7 kg 5 MIXING 315 x 255 x 100 mm Weight net / gross 1400 W n0 = 180 - 460 min-1 n0 = 300 - 700 min-1 Ø 140 mm L = 600 mm 4 006825 425147 MIXER SET M 14 Electronic Speed control electronics | Ergonomically-shaped handle | Soft grip inserts | 2-speed gearbox | Metal gear housing | Incl. spiral mixing tool | Soft start 4.7 / 6.2 kg 2 M 14 connection | Length 585 mm | 2 pieces (mortar Ø 135 mm, bitumen Ø 120 mm) 325 x 325 x 245 mm 1 Article number 42.584.67 4 006825 543193 8 230 V ~ 50 Hz 42.583.60 Packing dimensions Article number 42.584.55 4 006825 556520 Packaging unit Article number 42.583.65 4 006825 572223 ANGLE GRINDER ANGLE GRINDER BT-AG 500 BT-AG 850 230 V ~ 50 Hz 500 W M 14 Spindle lock n0 = 11000 min-1 Ø 115 mm Spindle lock | Metal gear head | Disc guard | Additional handle | Flange nut wrench | Cutting disc not included 1.6 / 1.8 kg 10 CUTTING 295 x 125 x 110 mm 230 V ~ 50 Hz 850 W M 14 Spindle lock n0 = 11000 min-1 Ø 125 mm DIAMOND DISC SETFÜR DIA-SCHEIBEN-SET FORBT-AG 500 SET OF VELCRO GRINDING / SANDING ANGLE GRINDER Ø 230 mm Spindle lock | Metal gear head | Disc guard | Additional handle | Flange nut wrench | Cutting disc not included 2.2 / 2.5 kg PAPERS FOR BT-MG 180/1 10 230 mm | 2 pieces 295 x 140 x 115 mm 1 Article number 44.305.80 4 006825 538205 Article number 44.305.90 4 006825 538212 ANGLE GRINDER ANGLE GRINDER ANGLE GRINDER BT-AG 1000 BT-AG 2000 BT-AG 2350 Article number 44.403.33 4 006825 442540 CUTTING STAND TS 125/115 FOR BT-AG 500 / 800 / 1000 For angle grinder with disc diameter 115 and 125 mm 1 Article number 230 V ~ 50 Hz 1010 W n0 = 11000 min -1 Ø 125 mm 230 V ~ 50 Hz 2000 W n0 = 6000 min -1 Ø 230 mm 230 V ~ 50 Hz 2350 W n0 = 6000 min -1 44.310.40 Ø 230 mm 4 006825 506457 M 14 Spindle lock M 14 Toolless disc guard adjustment | Spindle lock | Metal gear head | Flange nut wrench | Additional handle | Cutting disc not included 2.4 / 2.7 kg 6 410 x 120 x 90 mm Spindle lock M 14 Soft start | Spindle lock | Metal gear head | Disc guard adjustment | Additional handle | Flange nut wrench | Cutting disc not included 4.8 / 5.5 kg 2 540 x 168 x 125 mm CUTTING STAND TS 230 FOR BT-AG 2000 / 2350 Spindle lock Soft start | Spindle lock | Metal gear head | Toolless disc guard adjustment | Swivel handle | Additional handle | Flange nut wrench | Cutting disc not included 5.6 / 6.2 kg 2 For angle grinder with disc diameter 230 mm 560 x 180 x 125 mm 1 Article number 44.306.10 4 006825 538229 Article number 44.306.20 4 006825 538236 Article number 44.306.30 4 006825 538243 Article number 44.310.50 4 006825 509366 9 MILLING / PLANING / GRINDING MASONRY CHANNEL CUTTER ROUTER BT-MA 1300 BT-RO 1100 E Kit 230 V ~ 50 Hz 1320 W 8 - 30 mm 8 - 26 mm n0 = 9000 min-1 Ø 125 mm Infinitely variable cutting depth | Groove widths via spacer rings | Integrated dust extraction | Soft start | Overload cut-out | Spindle lock | Additional handle 4.9 / 5.5 kg 3 405 x 295 x 240 mm Ø 8 mm Ø 6 mm Electronic n0 = 11000 30000 min-1 max. 55 mm CUTTER SET FOR ROUTERS Continously adjustable cutter depth with vernier adjustment | Dust extractor adapter | Speed control electronics | Spindle lock | Multilevel revolver stop | Clamp 6 and 8 mm | Parallel guide, compass point, copy sleeve | Cutter set (12 pcs.) in wooden case 3.7 / 4.6 kg 4 12 pieces | Including 6 cutters with guide ring | Shaft diameter 8 mm 1 Article number 43.507.20 Article number 43.504.71 Article number 43.501.99 4 006825 431391 4 006825 584554 BISCUIT JOINER ELECTRIC PLANER ELECTRIC PLANER BT-BJ 900 BT-PL 750 BT-PL 900 230 V ~ 50 Hz 860 W n0 = 11000 min-1 Ø 100 x Ø 22 x 3.8 mm 230 V ~ 50 Hz 750 W max. 18 mm 0°- 90° HM / TCT, t=6 0 - 6 mm 82 mm 5 - 35 mm Infinitely height and angle adjustment | 3-step quick adjustment of cutting depth | Locking knob for changing cutters | Dust bag | Face spanner for changing cutters 3.3 / 4.6 kg 2 430 x 170 x 230 mm Article number Packing dimensions n0 = 16500 min-1 0 - 2 mm Chip ejection direction switch | Carbide planing blade | Large blade shaft for perfect results | Aluminium planing plate at front | Rebate depth stop | Parallel guide | Dust bag 2.8 / 3.2 kg 6 300 x 160 x 180 mm 43.506.11 4 006825 538458 Weight net / gross 1100 W 290 x 260 x 160 mm 4 006825 542318 10 230 - 240 V ~ 50 Hz Article number 900 W 0 - 15 mm 82 mm n0 = 16500 min-1 0 - 3 mm Chip ejection direction switch | Carbide planing blade | Large blade shaft for perfect results | Aluminium planing plate at front | Rebate depth stop | Parallel guide | Dust bag 3.0 / 3.5 kg 6 320 x 180 x 170 mm 43.452.61 4 006825 543216 Packaging unit 230 V ~ 50 Hz Article number 43.452.80 4 006825 538472 MULTIFUNCTION TOOL GRINDING AND ENGRAVING TOOL SET DELTA SANDER BT-MG 220 E BT-MG 135/1 BT-DS 180 230 V ~ 50 Hz 220 W 15000 22000 min-1 3° 90 x 90 x 90 mm 2m Wood 32 mm 50 mm Saw blade (32 mm wide) | Spade | Sanding plate with Velcro fastening | Sanding paper | Dust extraction adapter | Hex key | Soft grip | Speed control electronics | Aluminium gear head 1.8 / 2.0 kg 6 335 x 93 x 110 mm 230 V ~ 50 Hz 135 W 10000 32000 min-1 Ø 0.5 / 1.6 / 2.4 / 3.2 mm 230 V ~ 50 Hz 180 W n0 = 10000 min-1 n0 = 20000 min-1 STARTER KIT FOR BT-MG 180/1 / BT-MG 220 E 90 x 90 x 90 mm Speed control electronics | Spindle lock | Flexible shaft | Telescopic stand rod | Transport and storage case | 189 pcs. accessory set 0.7 / 2.2 kg 6 345 x 225 x 125 mm Velcro fastening for quick abrasive paper change | Connection for dust extractor | Abrasive paper | Dust extractor adapter 1.1 / 1.4 kg 10 For wood and plastic, in parts for alu 315 x 100 x 105 mm 1 Article number 44.650.50 4 006825 579970 Article number 44.191.65 4 006825 579987 Article number 44.642.30 4 006825 554939 Article number 44.650.10 4 006825 553178 ORBITAL SANDER ORBITAL SANDER ECCENTRIC SANDER BELT SANDER BT-OS 150 BT-OS 280 E BT-RS 420 E BT-BS 850/1 E 230 V ~ 50 Hz 150 W 230 V ~ 50 Hz 230 V ~ 50 Hz 230 x 93 mm 187 x 90 mm n0 = 11500 min-1 n0 = 23000 min-1 Ø 2.0 mm 4 270 x 160 x 100 mm Article number n0 = 0 - 12000 n0 = 0 - 24000 min-1 min-1 280 x 115 mm 230 x 115 mm 227 x 115 mm (Velcro) Abrasive disc with clamp | Additional handle | Abrasive paper | Dust extractor adapter 1.3 / 1.5 kg 280 W Ø 125 mm Abrasive disc with clamp and velcro fastening | Additional handle | Speed control | Abrasive paper | Dust bag | Aluminium grinding plate 2.0 / 2.3 kg 4 345 x 175 x 125 mm 44.605.44 4 006825 543346 Article number 420 W n0 = 6000 13000 min-1 n0 = 12000 26000 min-1 Electronic Velcro fastening for quick abrasive paper change | Speed control | Abrasive paper | Dust bag 2.0 / 2.2 kg 10 305 x 188 x 123 mm 44.605.32 4 006825 543353 Article number 230 V ~ 50 Hz 850 W 76 x 142 mm Electronic 0 - 380 m/min 76 x 533 mm Additional ceramic guard in case of wrongly set belt position | Simple, fast belt change | Additional handle for perfect work with the belt sander | dust bag | Speed control | Sanding belt 3.4 / 3.7 kg 6 370 x 173 x 155 mm 44.621.60 4 006825 538489 Article number 44.662.16 4 006825 564273 11 JIGSAW PENDULUM JIGSAW PENDULUM JIGSAW BT-JS 400 E BT-JS 650 E BT-JS 800 E 230 V ~ 50 Hz 400 W PE/PP 10 mm 55 mm 45° - 0° - 45° 800 - 3000 min-1 18 mm 1.8 / 2.3 kg 10 240 x 78 x 208 mm SAWING 45° - 0° - 45° 800 - 3000 min-1 18 mm PE/PP 20 mm 80 mm 6 mm Speed control electronics with speed selection | Soleplate can be angled up to 45° | Dust extraction via adapter | Allen key | Saw blade Article number 650 W 3210 10 mm 80 mm Speed control electronics with speed preselection | Soleplate can be angled up to 45° | Dust extraction via adapter | Adjustable pendulum stroke (4 settings) | Parallel guide | Allen key | Saw blade 2.1 / 2.4 kg 10 250 x 233 x 78 mm 43.211.00 Article number 800 W 45° - 0° - 45° 0 - 3000 min-1 20 mm PE/PP 25 mm 3210 10 mm Speed control electronics with speed selection | Aluminium soleplate, can be angled up to 45° | Dust extraction via adapter | Adjustable pendulum stroke (4 settings) | LED lamp | Toolless blade change | Parallel guide | Saw blade | Softgrip 2.3 / 2.6 kg 10 258 x 225 x 85 mm 43.211.10 4 006825 538533 4 006825 538540 MINI HAND-HELD CIRCULAR SAW HAND-HELD CIRCULAR SAW HAND-HELD CIRCULAR SAW BT-CS 860 KIT BT-CS 1200/1 BT-CS 1400/1 Article number 43.211.20 4 006825 538557 SAW BLADE SET FOR BT-CS 860 L / BT-CS 860 KIT every 2 x 6 pieces (2 x 20 teeth TCT, 2 x 80 teeth HSS, 2 x diamond cutting wheel for tiles) | Ø 85 x Ø 10 mm 2x 2x 2x 1 Article number 230 - 240 V ~ 50 Hz 450 W n0 = 6000 min -1 max. 23 mm t = 80 DIA t = 20 Ø 85 x Ø 10 mm Ø 85 x Ø 10 mm Ø 85 x Ø 10 mm Infinitely adjustable cutting depth | Integrated dust extractor | Electronic overload protection | Incl. laser | Tool to change the saw blade | Paralell guide | Incl. 6 sawblades, transport and storage case and carrying bag More information about this article 2.0 / 4.0 kg 3 230 V ~ 50 Hz Ø 160 x Ø 16 x 2.5 mm 1200 W n0 = 5000 min -1 55 mm / 90° 37 mm / 45° HW / TCT t = 24 230 V ~ 50 Hz Ø 190 x Ø 30 x 2.5 mm Toolless cutting depth adjustment | Toolless saw table adjustment | TCT saw blade | Splitting wedge | Parallel guide | Tool to change the saw blade 3.7 / 4.5 kg 4 348 x 257 x 248 mm 1400 W n0 = 4800 min -1 66 mm / 90° 45 mm / 45° 45.021.28 4 006825 575347 CARBIDE-TIPPED SAW BLADE FOR BT-CS 1400/1 HW / TCT t = 24 Toolless cutting depth adjustment | Toolless saw table adjustment | TCT saw blade | Splitting wedge | Parallel guide | Soft start | Tool to change the saw blade 4.3 / 5.2 kg 4 Ø 190 x Ø 30 x 2.5 mm | 24 teeth 355 x 270 x 255 mm 385 x 280 x 170 mm 1 Article number 43.309.80 Scan in the QR code 4 006825 578997 12 Weight net / gross Article number 43.309.32 4 006825 577112 Packing dimensions Article number 43.309.46 4 006825 577105 Packaging unit Article number 45.021.43 4 006825 548129 HOT GLUE GUN GLUE CARTRIDGES FOR ALL HOT GLUE GUNS BT-GG 200 P Ø 11 x 200 mm | 24 pieces 1 Article number 230 V ~ 50 Hz 12 W (max. 72 W) Ø 11 mm 45.221.99 ca. 5 min 4 006825 455021 ca. 150° C STAPLE / NAIL SET FOR BT-EN 20 STAPLE / NAIL SET FOR BT-EN 30 E Staples: 1000 pcs. 14 x 10 mm, 500 pcs. 12 x 10 mm, 500 pcs. 10 x 10 mm | Nails: 500 pcs. 16 mm, 500 pcs. 14 mm Staples: 300 pcs. of each size: 25 x 6, 20 x 6, 15 x 6 mm | Nails: 600 pcs. of each length: 32 mm, 20 mm, 500 pcs. 25 mm, 400 pcs. 15 mm OTHER TOOLS Support bar | 3 hot glue cartridges Ø 11 x 100 mm 0.2 / 0.3 kg 10 170 x 159 x 32 mm 1 Article number 45.221.60 4 006825 539509 Article number 41.378.83 Article number 41.378.80 4 006825 533699 4 006825 554656 HOT AIR GUN SOLDERING GUN ELECTRIC STAPLER ELECTRIC STAPLER BT-HA 2000/1 BT-SG 100 BT-EN 20 BT-EN 30 E b a b 230 V ~ 50 Hz I = 1000 W II = 2000 W I = 350 °C II = 550 °C I = 300 l/min II = 500 l/min Safe and solid standing for stationary use | 2 heat settings | Offset nozzles for flexibility | Heat nozzle | Wide nozzle | Reducer nozzle | Reflector nozzle | Paint scraper 0.7 / 1.6 kg 10 296 x 85 x 272 mm Article number 230 V ~ 50 Hz 100 W max. 500° C ca. 12 sec. Integrated soldering position light | Easy to replace soldering tip | 2 soldering tips | Cutting tip | Solder wire | Solder grease 0.6 / 1.0 kg 10 265 x 220 x 60 mm 45.201.67 4 006825 543230 Article number a: 11.2 - 11.4 mm a: 8 - 16 mm b: 2 mm b: 8 - 16 mm 4 006825 538441 a: 15 - 32 mm b: 2 mm 30 / min 1.16 - 1.26 mm 1.1 - 1.25 mm Electronic Stapling force control | Magazine filling level indicator | Safety lug | ON/OFF switch | 100 staples 11.4 x 12 mm | 100 nails 15 mm Electronic stapling force control | Magazine filling level indicator | Safety lug | ON/OFF switch | 300 staples 25 x 6 mm | 200 staples 15 x 6 mm | 300 nails 32 mm | 200 nails 25 mm 1.1 / 1.3 kg 10 235 x 170 x 60 mm 46.100.30 a b 230 V ~ 50 Hz 230 V ~ 50 Hz 20 / min b a a Article number a: 6 mm b: 15 - 25 mm 1.7 / 2.0 kg 10 240 x 210 x 65 mm 42.578.60 4 006825 538502 Article number 42.578.43 4 006825 543254 13 BELT AND DISK SANDER WOODWORKING LATHE BT-US 400 BT-WW 1000 GRINDING BELT SET FOR BT-US 400 LATHE BLADE SET FOR BT-WW 1000 3 pieces | Width / Length 100 x 914 mm | Grit size 60 / 80 / 120 K 5 pieces | Flat and round-nose chisel | Gouge chisel | Round and pointed chisel 1 1 Article number 230 V ~ 50 Hz 375 W S2 30 min Ø 150 n0 = 1450 min -1 230 V ~ 50 Hz 350 W S2 30 min n0 = 810/1180/ lmax = 1000 mm 1700/2480 min-1 Ømax = 356 mm 44.198.30 4 006825 443783 GRINDING/SANDING PAPER SET FOR BT-US 400 100 x 915 mm Belt grinding device | Support table (can be angled from 0° to 45°) | Cross stop (- 60° to + 60°) | Disc grinder with quick-fit fastening system | 4 rubber feet to ensure that the machine stands securely 15.6 / 18.0 kg 1 500 x 300 x 260 mm Strong guide frame | Tailstock with self-centering live spindle tip | Workpiece support | Front end driver ring | Face plate Ø 143 mm | Long-lasting V-belt drive which can be adjusted to 4 settings 27.5 / 38.0 kg 1 3 pieces | Velcro fastening | Ø 150 mm | Grit size 80 / 120 / 180 K 1500 x 230 x 260 mm 1 Article number 44.192.53 4 006825 541557 14 Weight net / gross Article number 43.121.02 4 006825 540611 Packing dimensions Article number 44.198.45 4 006825 529036 Packaging unit Article number 43.112.00 4 006825 431551 15 COMPRESSOR KIT COMPRESSOR COMPRESSOR COMPRESSOR BT-AC 180 KIT BT-AC 200/24 OF BT-AC 200/50 OF BT-AC 240/50/10 OF 230 V ~ 50 Hz 1.1 kW (1.5 HP) n0 = 2850 min-1 S3 25% 230 V ~ 50 Hz 1.1 kW (1.5 HP) n0 = 2850 min-1 230 V ~ 50 Hz 220 - 240 V 1.1 kW (1.5 HP) n0 = 3550 min-1 ~ 50 Hz S3 15% 8 bar max. 180 l/min 8 bar max. 140 l/min l 3m Oilfree 5.8 / 6.5 kg 5 470 x 120 x 335 mm Article number l 24 l Transport handle | Accessory compartment | Compressed air hose with quick-lock coupling | Blow-out pistol with pressure gauge | Hose for use as tire pressure gauge | Nozzle for use as blow-out pistol | Adaptor set Oilfree Pressure gauge & quick-lock coupling | Foot with suction cup function | Intake filter, non-return valve, safety valve | Pressure regulator | Drain cock | 10 year warranty against rusting through of the tank 19.5 / 21.0 kg 1 4 006825 553734 Article number Oilfree 50 l Pressure gauge & quick-lock coupling | Foot with suction cup function | Intake filter, non-return valve, safety valve | Pressure regulator | Drain cock | 10 year warranty against rusting through of the tank 23.3 / 26.0 kg 1 770 x 320 x 725 mm 40.205.05 4 006825 550009 1.5 kW S3 25% n0 = 4000 min-1 10 bar max. 240 l/min l 50 l 570 x 445 x 255 mm 40.205.20 8 bar max. 140 l/min Article number Oilfree Transportgriff, Räder für einfachen Transport | DruckschalPressure gauge & quick-lock coupling filter, ter | Sicherheitsventil | Rückschlagventil | Ansaugfi| Intake lter | Pumpe non-return valve, safety valve | Pressure| regulator ölfrei | Druckminderer, Entwässerungshahn Manometer| ON/ und OFF switch | Drain cock | 10Arbeitsdruck year warranty against| 10rusting Schnellkupplung für geregelten | 1 Zylinder Jahre through ofgegen the tank Transport Garantie Durchrostung des Kessels handle, large wheels for easy transport | Pressure switch | intake filter | non-return valve | safety valve | pump oilfree | Pressure reducer | drain cock | Pressure gauge and quick-lock coupling for regulated working pressure, 1 cylinder | 10 year warranty against rusting through the tank 22.2 / of23.5 kg 1 865 x 340 x 340 mm 40.204.80 4 006825 570113 Article number 40.103.90 4 006825 576092 COMPRESSOR COMPRESSOR COMPRESSOR COMPRESSOR BT-AC 230/24 BT-AC 270/50 BT-AC 400/50 BT-AC 320/50/10 DE: price/performance ”Very Good“ DE: ”Price tip“ 230 V ~ 50 Hz 1.5 kW (2 HP) n0 = 2850 min-1 S2 15 min 8 bar max. 206 l/min l 1.8 kW (2.5 HP) n0 = 2850 min-1 8 bar max. 262 l/min l 24 l Oil lubricated 24.8 / 26.6 kg 1 595 x 270 x 605 mm Article number 4 006825 566772 Weight net / gross Oil lubricated 8 bar max. 400 l/min Pressure gauge & quick-lock coupling | Foot with suction cup function | Intake filter, non-return valve, safety valve | Pressure regulator | Drain cock | 10 year warranty against rusting through of the tank 32.0 / 35.0 kg 1 Article number 40.103.70 4 006825 570755 Packing dimensions 230 V ~ 50 Hz 2.2 kW (3 HP) n0 = 2850 min-1 10 bar max. 320 l/min l 50 l 775 x 325 x 730 mm 40.103.50 230 V ~ 50 Hz 2.6 kW (3.5 HP) n0 = 2850 min-1 S2 30 min l 50 l Pressure gauge & quick-lock coupling | Foot with suction cup function | Intake filter, non-return valve, safety valve | Pressure regulator | Drain cock | 10 year warranty against rusting through of the tank 16 230 V ~ 50 Hz Oil lubricated 50 l Transportgriff, große Räder für einfachen Transport | Druckgauge| Rückschlagventil & quick-lock| coupling schalter |Pressure Sicherheitsventil Ansaugfilter| | Intake Pumpe fiölgeschmiert lter, non-return valve, safety valve | |ON/OFF switchEnt-| | Ölstandskontrolle über Schauglas Druckminderer, Pressure regulator | Drain und cockSchnellkupplung | 10 year warranty against wässerungshahn | Manometer für un-/geregelten rusting through of the|tank Arbeitsdruck | 2 Zylinder 10 Jahre Garantie gegen Durchrostung des Transport handle, large wheels for easy transport | Kessels Pressure switch | intake filter | non-return valve | safety valve | pump lubricated with oil | Oil level check by scale | Pressure reducer, drain cock | Pressure gauge and quick-lock coupling for unregulated/regulated working 40.0 pressure, 2 cylinders / 42.5 kg | 10 year warranty against rusting 1 through of the tank 800 x 360 x 730 mm Article number 40.101.70 4 006825 550252 Packaging unit Oil lubricated Belt drive | Oil level check by scale | Pressure reducer | Drain cock | Pressure gauge and quick-lock coupling for unregulated / regulated working pressure | 2 cylinders | 10 year warranty against rusting through of the tank 60.0 / 63.0 kg 1 840 x 410 x 750 mm Article number 40.103.80 4 006825 574746 SHORT BLOW-OUT PISTOL LONG BLOW-OUT PISTOL For all compressors TIRE PRESSURE GAUGE For all compressors 1 Working pressure 0 - 8 bar | Incl. discharge nozzle 1 Article number 41.331.00 4 006825 411065 1 Article number 41.331.02 Article number 41.370.00 4 006825 411164 4 006825 417067 TIRE PRESSURE GAUGE PROFI PAINT SPRAY GUN WITH GRAVITY-FEED CAN PAINT SPRAY GUN PROFI WITH GRAVITY-FEED CAN PAINT SPRAY GUN WITH SUCTION-FEED CAN Working pressure 0 - 8 bar | Incl. discharge nozzle and big gauge | Incl. tire inflating adapter Point / wide cone regulator | Filling max. 0.6 l | Working pressure 3 - 4 bar Point / wide cone regulator | Filling max. 0.6 l | Working pressure 3 - 3.5 bar | Incl. air volume control Rotating nozzle with point/wide cone regulator | Filling max. 1 l | Working pressure 3 - 4 bar 1 1 Article number 41.331.10 4 006825 574173 SPRAY GUN WITH SUCTION-FEED CAN 1 Article number 41.330.00 4 006825 411010 COMPRESSED AIR TOOL SET Filling max. 0.9 l | Working pressure 3 - 6 bar 1 41.332.00 SUCTION-FEED SPRAY PISTOL 1 41.327.41 UNDERSEAL GUN Working pressure 3 - 8 bar 1 41.334.00 4 006825 411102 Article number Article number JET GUN WITH SUCTION-FEED CAN Filling max. 1 l | Working pressure 3 - 8 bar 1 Article number 41.327.20 4 006825 410020 4 006825 411133 Article number 41.333.00 4 006825 411089 AIR IMPACT SCREWDRIVER SET DSS 260/2 AIR RATCHET SCREWDRIVER SET DRS 200/2 Working pressure max. 6.3 bar | Air consump. approx. 115 l/min | Torque max. 312 Nm Working pressure max. 6.3 bar | Air consump. approx. 122 l/min | Torque max. 68 Nm 1 41.335.01 41.329.00 4 006825 411003 5 pieces | Spiral hose 4 m 4 006825 417050 Working pressure 6 bar max. | Nozzles 3 x Ø 5 mm Article number PROFESSIONAL COMPRESSED AIR TOOL SET 1 Article number 4 006825 411072 41.330.30 4 006825 574180 3 pieces | Spiral hose 4 m 1 Article number 1 Article number 1 Article number 41.389.10 4 006825 504361 Article number 41.391.70 4 006825 504385 17 AIR CHIPPING HAMMER SET DMH 250/2 AIR ROD GRINDER SET DSL 250/2 COMPRESSED AIR ECCENTRIC SANDER DSE 125 AIR TACKER SET DTA 25/2 Working pressure max. 6.3 bar | Air consump. approx. 115 l/min | Blow rate 4500/min Working pressure max. 6.3 bar | Air consump. approx. 128 l/min | Idling speed 22000 min-1 Grinding disk Ø 125 mm | Working pressure max. 6.3 bar / Air consump. approx. 106 l/min Working pressure max. 8.3 bar | Air consump. approx. 0.11 l/shot | Clamping width 5.7 mm Article number Article number 1 1 Article number 41.390.08 1 Article number 4 006825 504392 41.385.20 4 006825 504378 41.333.25 4 006825 504415 4 006825 581607 COMPRESSED AIR CLAMPS COMPRESSED AIR CLAMPS COMPRESSED AIR CLAMPS COMPRESSED AIR CLAMPS Dimensions 5 x 13 mm | 3000 pieces Dimensions 5 x 16 mm | 3000 pieces Dimensions 5 x 25 mm | 3000 pieces Dimensions 5 x 40 mm | 3000 pieces 1 1 Article number 41.378.50 1 Article number 4 006825 504422 41.378.55 1 Article number 4 006825 504439 41.378.60 COMPRESSED AIR NAILS COMPRESSED AIR NAILS Dimensions 25 mm | 3000 pieces Dimensions 40 mm | 3000 pieces Dimensions 50 mm | 3000 pieces 1 1 41.378.71 4 006825 504460 MINI OILER 1 Article number 41.378.72 Article number 4 006825 504446 COMPRESSED AIR NAILS Article number 1 SPECIAL COMPRESSED AIR OIL Contents: 500 ml | For all compressed air tools 1 Article number 41.378.73 4 006825 504866 4 006825 505795 FILTER + PRESSURE REDUCER FILTER + PRESSURE REDUCER Article number 41.350.02 4 006825 581614 Weight net / gross 41.383.10 4 006825 411270 COMBINATION CONDITIONING UNIT WITH OILER Adjustable oil quantity 1 Article number 41.378.61 4 006825 505788 R 1/4" internal thread | R 1/4" external thread 18 41.377.55 1 Article number 41.342.00 1 Article number 41.341.00 4 006825 410051 4 006825 410044 Packing dimensions Packaging unit Article number 41.350.01 4 006825 410181 COMBINATION CONDITIONING UNIT WITH OILER Adjustable oil quantity 1 COMPLETE SPIRAL HOSE COMPLETE SPIRAL HOSE Length 4 m / Ø 6 mm | Maximum pressure 8 bar | Nipple and coupling 6.35 mm (1/4") Length 8 m / Ø 6 mm | Maximum pressure 8 bar | Nipple and coupling 6.35 mm (1/4") 1 Article number 41.350.00 4 006825 410075 1 Article number 41.394.10 4 006825 411737 Article number 41.394.20 4 006825 411744 COMPLETE FABRIC HOSE COMPLETE FABRIC HOSE COMPLETE FABRIC HOSE AUTOMATIC HOSE ROLLER Length 10 m / Ø 6 mm | Maximum pressure 15 bar | Nipple and coupling Length 15 m / Ø 6 mm | Maximum pressure 15 bar | Nipple and coupling Length 15 m / Ø 9 mm | Maximum pressure 10 bar | Nipple and quick release coupling Length 9 m + 1 m | Maximum pressure 12 bar | Swivelling holder 1 1 Article number 41.381.00 4 006825 410082 1 Article number 41.382.00 4 006825 410099 1 Article number 41.382.10 4 006825 574166 Article number 4 006825 509564 QUICK-LOCK COUPLING QUICK-LOCK COUPLING QUICK LOCK COUPLING QUICK-LOCK COUPLING R 1/4" external thread R 3/8" external thread R 1/2" external thread R 1/4" internal thread 1 1 Article number 41.392.07 4 006825 560824 1 Article number 4 006825 560831 QUICK-LOCK COUPLING QUICK LOCK COUPLING R 3/8" internal thread R 1/2" internal thread 1 Article number 41.392.08 4 006825 410327 Article number 1 Article number 41.392.09 4 006825 596939 QUICK-LOCK COUPLING Article number QUICK-LOCK COUPLING Ø 9 mm 1 41.392.10 4 006825 599046 Article number 41.392.06 4 006825 410334 Ø 6 mm 1 41.392.05 41.380.00 1 41.393.01 4 006825 581638 Article number 41.393.02 4 006825 581645 19 HOSE CONNECTOR SET DN7 ATTACHABLE SLEEVE Ø 6 mm | One-hand quick-lock coupling 1 Ø 6 mm 41.395.00 4 006825 410136 HOSE CONNECTION TUBE 41.396.60 4 006825 411690 HOSE NOZZLE 4 006825 581652 4 006825 581621 41.396.65 4 006825 581676 R 3/8" external thread R 1/4" internal thread R 3/8" internal thread 1 4 006825 411683 DOUBLE NIPPLE 41.396.40 4 006825 411676 REDUCTION 1 41.396.10 4 006825 411645 Weight net / gross 41.396.45 4 006825 581683 41.396.30 4 006825 411669 Packing dimensions 4 006825 562347 Article number 41.396.20 4 006825 411652 REDUCTION R 3/8" external thread | R 1/4" internal thread 1 Article number 41.396.55 R 1/4" external thread REDUCTION 1 Article number Article number 1 Article number R 3/8" external thread | R 1/4" external thread R 1/4" external thread DOUBLE NIPPLE 1 Article number R 3/8" external thread 41.396.66 4 006825 581669 THREADED NIPPLE 41.396.50 4 006825 411720 1 Article number THREADED NIPPLE 1 41.393.10 THREADED NIPPLE 1 Article number Article number Ø 6 mm | R 3/8" external thread THREADED NIPPLE Article number 41.396.61 HOSE NOZZLE 1 41.393.20 1 Article number Ø 6 mm | R 1/4" external thread 1 Article number Ø 6 mm 1 Article number Ø 9 mm HOSE CONNECTION TUBE Ø 9 mm 1 Article number 20 ATTACHABLE SLEEVE R 1/2” external thread | R 3/8" internal thread 1 Article number 41.396.00 4 006825 411621 Packaging unit Article number 41.396.05 4 006825 562330 DISTRIBUTOR CLIP KIT R 3/8" internal thread MICHELIN-NIPPLE 1 1 Article number DN 6 For external diameters of 8 - 12 mm | 5 pieces 41.396.80 4 006825 411713 Article number 1 41.396.70 4 006825 411706 Article number 41.393.30 4 006825 588712 INFLATION ADAPTER KIT 8 pieces 1 Article number 41.396.95 4 006825 511475 Note: For safe handling of the products please refer to the instructions in the operating manual. 21 22 ELECTRIC WELDER ELECTRIC WELDER ELECTRIC WELDER BT-EW 150 BT-EW 160 BT-EW 200 230 V ~ 50 Hz 16 A I2: 40 - 80 A Ø 1.6 - 2.5 mm Ik max.: 120 A Infinitely adjustable welding current | Thermostat with pilot lamp | Carry handle 11.2 / 12.1 kg 1 400 x 230 x 290 mm 230/400 V ~ 50 Hz 16 A I2: 55 - 160 A Imax: 250 A Ø 2 - 4 mm Fan cooling | Infinitely adjustable welding current | Thermostat with pilot lamp | Mobile | 2 mains lead 20.6 / 22.7 kg 1 490 x 280 x 335 mm Article number 15.440.54 4 006825 546460 230/400 V ~ 50 Hz 16 A I2: 57 - 200 A Fan cooling | Infinitely adjustable welding current | Thermostat with pilot lamp | Mobile | Adapter cable 230/400 V 21.6 / 23.2 kg 1 490 x 280 x 340 mm Article number 15.460.40 4 006825 546392 Article number 15.490.40 4 006825 541656 INVERTER WELDER INVERTER WELDER FLUX CORED WIRE WELDER BT-IW 100 BT-IW 150 BT-FW 100 230 V ~ 50 Hz 16 A I2: 10 - 80 A Ø 1.6 - 2.5 mm 230V ~ 50 Hz Fan cooling | Thermostat with pilot lamp | Infinitely adjustable welding current | Electrode holder | Earth terminal | Carrying strap | TIG equipment available as an optional accessory 4.1 / 5.5 kg 1 220 x 180 x 270 mm Ø 1.6 - 4 mm Fan cooling | Thermostat with pilot lamp | Infinitely adjustable welding current | Electrode holder | Earth terminal | Carrying strap | TIG equipment available as an optional accessory 5.8 / 7.1 kg 1 350 x 205 x 215 mm 15.441.11 4 006825 546477 Weight net / gross I2: 20 - 150 A TIG / WIG OPTION TIG / WIG OPTION Article number 16 A Article number 230 V ~ 50 Hz 16 A Ø 0.9 mm max. 0.4 kg 2x 45 / 90 A Carrying strap | Earth terminal | Burner | Infinitely adjustable wire feed | Overheating indicator | Welding shield | Slag hammer | Fan cooling 14.0 / 15.3 kg 1 515 x 230 x 340 mm 15.441.50 4 006825 578249 Packing dimensions Ø 2 - 4 mm Article number 15.752.20 4 006825 549928 Packaging unit 23 SHIELDING GAS WELDER SHIELDING GAS WELDER SHIELDING GAS WELDER BT-GW 150 BT-GW 170 BT-GW 190 D WELDING TEXTBOOK “PRACTICAL WELDING“ For all conventional welding methods | In German language 1 Article number 230 V ~ 50 Hz Ø 0.6 - 0.8 mm 16 A max. 5 kg 6x 25 - 120 A (max. 150 A) Infinitely Ø 0.6 - 0.8 mm Fan cooling | Thermostat with pilot lamp | Complete with flexible hose pack | Infinitely adjustable wire feed | Gas-cooled torch | Welding shield | Pressure reducer | 2 wheels 25.4 / 28.6 kg 230 V ~ 50 Hz 1 695 x 300 x 450 mm 16 A max. 5 kg 6x 25 - 135 A (max. 170 A) Infinitely Fan cooling | Thermostat with pilot lamp | Complete with flexible hose pack | Infinitely adjustable wire feed | Gas-cooled torch | Welding shield | Pressure reducer | 4 wheels 34.6 / 37.0 kg 1 705 x 325 x 460 mm 230 V/1 ~ 50 Hz 16 A Ø 0.6 - 1.0 mm max. 5 kg 15.907.00 6x 25 - 160 A (max. 190 A) 4 006825 156331 WELDING SHIELD Infinitely Fan cooling | Thermostat with pilot lamp | Complete with flexible hose pack | Infinitely adjustable wire feed | Gas-cooled torch | Welding shield and adapter cable | Pressure reducer | 4 wheels 38.1 / 41.0 kg 1 DIN glas 705 x 325 x 470 mm 1 Article number 15.749.70 4 006825 538052 HEAD WELDING SAFETY SHIELD 1 Article number 15.749.80 4 006825 538069 15.842.10 4 006825 152135 LEATHER WELDING GAUNTLETS 15.749.90 4 006825 538076 AUTOMATIC WELDING SCREEN DIN GLASSES Protection class 9 - 13 | Shading time: 1/30000 s | Solar area 5 x clear glass | 1 x welding glass DIN 9 | Dimension: 110 x 90 mm 1 Article number Article number 15.842.50 4 006825 547191 LEATHER WELDING APRON 4 006825 152036 1 Article number 15.843.00 4 006825 152043 ALL-METAL SLAG HAMMER Article number 1 1 15.935.00 4 006825 156959 24 Weight net / gross 1 Article number 15.936.00 4 006825 156980 Packing dimensions 15.934.00 4 006825 156904 EARTH TERMINAL FOR ALL WELDING SETS For all electric and flux-cored wire welders Article number 15.842.00 STEEL WIRE BRUSH 1 Article number Article number Max. welding current 300 A 1 Article number 15.841.10 4 006825 152210 Packaging unit Article number 15.925.00 4 006825 156805 ELECTRODE HOLDER FOR ALL ELECTRIC WELDERS ANGLE MAGNET FOR ALL WELDING SETS Max. welding current 250 A GAS NOZZLE CLEANER FOR ALL SHIELDING GAS WELDERS 45 °/ 90° / 135° 1 With 3 flexible cleaning blades 1 Article number 15.927.00 4 006825 156812 CONICAL GAS NOZZLE FOR ALL SHIELDING GAS WELDERS 1 Article number 15.922.00 4 006825 152258 CONTACT TUBES FOR BT-FW 100 2 pieces CONTACT TUBES FOR ALL SHIELDING GAS WELDERS 4 006825 156669 PRESSURE REDUCERS FOR ALL SHIELDING GAS WELDERS 1 pressure gauges | Infinitely adjustable delivery rate 1 Article number 4 006825 156447 ARGON-CO2 GAS FOR ALL SHIELDING GAS WELDERS 4 006825 554779 PRESSURE REDUCERS FOR ALL SHIELDING GAS WELDERS 1 4 006825 156454 15.762.00 4 006825 156683 PISTON SPRAY FOR ALL SHIELDING GAS WELDERS 15.765.06 4 006825 156546 CO2 GAS FOR ALL SHIELDING GAS WELDERS Article number Article number ARGON GAS FOR ALL SHIELDING GAS WELDERS Filling pressure: 60 bar | Disposable 1 15.760.51 4 006825 156522 WIG WELDING TORCH KIT FOR BT-IW 100, BT-IW 150, BT-IW 160 Article number WELDING WIRE: STEEL FOR ALL SHIELDING GAS WELDERS Ø 0.6 mm | Weight 0.8 kg 1 15.765.00 4 006825 156102 15.765.01 4 006825 156119 Filling pressure: 60 bar | Disposable Article number 15.762.10 4 006825 156690 Capacity 500 ml 1 Article number 1 15.716.03 1 Article number 2 pressure gauges | Cylinder pressure | Infinitely adjustable delivery rate Argon 80% CO2 20% | Filling pressure: 60 bar | Disposable Article number 15.762.60 1 15.765.08 Ø 0.8 mm | 5 pieces 1 Article number CONTACT TUBES FOR ALL SHIELDING GAS WELDERS Ø 0.6 mm | 5 pieces 1 15.761.10 15.924.00 4 006825 156775 Ø 0.9 mm | 5 pieces 1 Article number Article number Article number 1 15.441.32 4 006825 580570 Article number 15.767.00 4 006825 156157 25 WELDING WIRE: STEEL FOR ALL SHIELDING GAS WELDERS WELDING WIRE: STEEL FOR ALL SHIELDING GAS WELDERS Ø 0.6 mm | Weight 5 kg Ø 0.8 mm | Weight 0.8 kg 1 15.763.11 4 006825 156089 WELDING WIRE: CrNi FOR ALL SHIELDING GAS WELDERS 15.767.02 4 006825 157000 FLUX CORED WELDING WIRE FOR BT-FW 100 Ø 0.6 mm | Weight 0.6 kg 4 006825 156171 ROD ELECTRODES FOR ALL ELECTRIC WELDERS 15.762.50 4 006825 554762 ROD ELECTRODES FOR ALL ELECTRIC WELDERS ROD ELECTRODES FOR ALL ELECTRIC WELDERS 4 006825 152289 15.917.36 4 006825 506112 4 006825 506105 ROD ELECTRODES FOR ALL ELECTRIC WELDERS Ø 3.2 x 350 mm | 25 pieces 15.917.39 4 006825 506341 15.917.40 4 006825 506358 Packing dimensions 15.917.35 1 Article number 1 Weight net / gross Article number Ø 2.5 x 350 mm | 175 pieces Ø 3.2 x 350 mm | 115 pieces 26 15.913.20 4 006825 152272 ROD ELECTRODES FOR ALL ELECTRIC WELDERS Article number 4 006825 156072 Ø 2.0 x 300 mm | 100 pieces 1 Article number 15.763.10 ROD ELECTRODES FOR ALL ELECTRIC WELDERS ROD ELECTRODES FOR ALL ELECTRIC WELDERS 1 15.914.20 Article number 1 Article number Ø 2.5 x 350 mm | 100 pieces 1 Article number 4 006825 156324 1 Article number Ø 2.5 x 350 mm | 25 pieces 15.763.51 Ø 2.0 x 300 mm | 25 pieces 1 15.767.20 1 Article number Ø 0.9 mm | Weight 0.4 kg 1 Article number Ø 0.8 mm | Weight 15 kg 1 Article number WELDING WIRE: STEEL FOR ALL SHIELDING GAS WELDERS Ø 0.8 mm | Weight 5 kg 1 Article number WELDING WIRE: STEEL FOR ALL SHIELDING GAS WELDERS Packaging unit Article number 15.915.20 4 006825 152296 BENCH DRILL BENCH DRILL BENCH DRILL BT-BD 401 BT-BD 501 BT-BD 701 BT-BD 801 E 230 V ~ 50 Hz 350 W S2 15 min n0 = 650 3000 min-1 1.5 - 13 mm -45° – 45° 104 mm max. 50 mm Infinite table height adjustment | Scroll chuck | Adjustable depth stop for precise drilling | Tilting and pivoting drill table | Drilling spindle with ball bearings 9.9 / 15.8 kg 1 458 x 355 x 228 mm Article number 230 V ~ 50 Hz 500 W S2 15 min n0 = 280 2500 min-1 3 - 16 mm -45° – 45° 115 mm max. 50 mm Infinite table height adjustment | Scroll chuck | Swiveling scale ring for precise setting of the drill depth | Tilting and pivoting drill table | Drilling spindle with ball bearings 18.0 / 19.4 kg 4 006825 591286 Article number 630 W S2 15 min 1.5 - 16 mm -45° – 45° MK2 to 20 mm 1 510 x 260 x 385 mm 42.504.45 230 V ~ 50 Hz n0 = 240 2520 min-1 max. 60 mm 126 mm 1 652 x 420 x 260 mm 42.505.55 4 006825 586817 Article number 550 W 3 - 16 mm -45° – 45° MK2 to 20 mm Infinite table height adjustment | Scroll chuck | MK2 chuck | Swiveling scale ring for precise setting of the drill depth | Tilting and pivoting drill table | Vise supplied | Drilling spindle with ball bearings 27.0 / 31.0 kg 230 V ~ 50 Hz G oo d purchase, 13/ n0 = 450 2500 min-1 0 201 DK: BENCH DRILL max. 80 mm 160 mm Infinitely adjustable speed control | Quick-change drill chuck | MK2 chuck | Cross line laser | Incl. digital display for spindle speed | Adjustable depth stop for precise drilling | Tilting and pivoting drill table | Pull-out roll base 37.3 / 40.2 kg 1 734 x 500 x 275 mm 42.505.90 4 006825 505023 Article number 42.507.10 4 006825 546484 27 BENCH DRILL BENCH DRILL BENCH DRILL WET-DRY GRINDER BT-BD 1020 BT-BD 1020 D BT-BD 1625 D BT-WD 150/200 230 V ~ 50 Hz 700 W S2 15 min n0 = 210 2500 min-1 3 - 16 mm -45° – 45° MK2 to 20 mm 169 mm max. 80 mm Infinite table heigh adjustment | Quick-change drill chuck | MK2 chuck | Swiveling scale ring for precise setting of the drill depth | Tilting and pivoting drill table | Vise supplied | Drilling spindle with ball bearings 52.5 / 54.5 kg 1 800 x 490 x 295 mm 400 V ~ 50 Hz 700 W S2 15 min n0 = 210 2220 min-1 3 - 16 mm -45° – 45° MK2 to 20 mm 169 mm max. 80 mm Infinite table height adjustment | Quick-change drill chuck | MK2 chuck | Tilting and pivoting drill table | Vise supplied | Drilling spindle with ball bearings | Reverse facility 52.5 / 54.5 kg 1 800 x 490 x 295 mm Article number 42.507.85 4 006825 505009 400 V ~ 50 Hz 700 W S2 15 min n0 = 210 2500 min-1 3 - 16 mm -45° – 45° MK3 to 25 mm 169 mm max. 80 mm Infinite table height adjustment | Quick-change drill chuck | MK3 chuck | Tilting and pivoting drill table | Vise supplied | Drilling spindle with ball bearings | Reverse facility 60.0 / 62.0 kg 1 1145 x 465 x 295 mm Article number 42.507.90 4 006825 505016 230 V ~ 50 Hz 250 W S2 30 min Ø 150 x Ø 20 Ø 200 x Ø 40 Trockenscheibe n0 = 2950 min-1 n0 = 134 min-1 Adjustable tool support | Sturdy worm gearing for the wet grinding disc | Slow-speed, fine-grained wet grinding disc | Corrosion-resistant water bath container | RCD plug for protection of life and health 9.7 / 10.3 kg 1 420 x 260 x 230 mm Article number 42.512.10 4 006825 504996 Article number 44.172.15 4 006825 537703 BENCH GRINDER BENCH GRINDER BENCH GRINDER BELT AND DISK SANDER BT-BG 150 BT-BG 175 BT-BG 200 BT-US 240 230 V ~ 50 Hz 150 W S2 30 min n0 = 2950 min-1 Ø 150 x Ø 12.7 x 16 mm 230 V ~ 50 Hz 400 W S2 30 min n0 = 2800 min-1 Ø 175 x Ø 32 x 25 mm 230 V ~ 50 Hz 400 W S2 30 min n0 = 2800 min-1 Ø 200 x Ø 32 x 25 mm 230 V ~ 50 Hz 240 W S2 30 min n0 = 2800 min-1 Ø 150 x Ø 12.7 x 20 mm 50 x 686 mm Adjustable work supports | Safety hoods closed off at the sides | Sturdy, compact design in metal | Incl. 1 fine and 1 coarse grinding / sanding wheel | Ball bearing mounted shaft with zero play | 4 rubber feet to ensure that the machine stands securely 5.7 / 6.0 kg 1 307 x 180 x 212 mm Article number Weight net / gross 10.1 / 10.8 kg 1 360 x 260 x 260 mm 44.125.50 4 006825 541182 28 Adjustable work supports | Safety hoods closed off at the sides | Sturdy, compact design in metal | Incl. 1 fine and 1 coarse grinding / sanding wheel | Ball bearing mounted shaft with zero play | 4 rubber feet to ensure that the machine stands securely Article number 11.3 / 12.2 kg 1 350 x 250 x 260 mm 44.126.04 4 006825 540260 Packing dimensions Adjustable work supports | Safety hoods closed off at the sides | Sturdy, compact design in metal | Incl. 1 fine and 1 coarse grinding / sanding wheel | Ball bearing mounted shaft with zero play | 4 rubber feet to ensure that the machine stands securely Article number 7.1 / 8.1 kg 1 400 x 340 x 200 mm 44.128.06 4 006825 540277 Packaging unit Adjustable spark guard with large safety goggles | Adjustable work supports | Safety hoods closed off at the sides | Sturdy, compact design in metal | Coarse grinding disc | 4 rubber feet to ensure that the machine stands securely Article number 44.661.31 4 006825 541564 METAL LATHE LATHE CHISEL KIT FOR BT-ML 300 BT-ML 300 LIVE LATHE CENTER FOR BT-ML 300 DE: price/performance ”Very Good“ 11 pieces | HSS chisels Taper MK 2 1 1 Article number 230 V ~ 50 Hz 370 W 0 - 1100 min-1 0 - 2500 min-1 45.050.20 Article number 45.050.24 l max 300 mm 4 006825 556681 FOUR JAW CHUCK FOR BT-ML 300 max. Ø 70 mm max. Ø 70 mm Ø 25 - 70 mm 4 006825 556698 FIXED STEADY FOR BT-ML 300 GRINDING BELT KIT FOR BT-US 240 Counter-clockwise / clockwise selector switch | Internally and externally stepped clamp jaws | Centering pin | Different feed speeds | Automatic feed | Infinitely adjustable speed control 37.0 / 43.0 kg 1 Ø 80 mm 790 x 360 x 380 mm Max. Ø 30 mm 1 Article number 45.050.04 4 006825 541533 Article number 5 pieces | Width / Length 50 x 686 mm | Grit size 2 x 60 / 80 / 1 x 100 K 1 45.050.23 4 006825 556728 Article number 1 45.050.21 4 006825 556735 Article number 44.198.09 4 006825 565010 29 ELECTRIC HOIST ELECTRIC HOIST ELECTRIC HOIST ELECTRIC HOIST BT-EH 250 BT-EH 300 BT-EH 500 BT-EH 600 230 V ~ 50 Hz 500 W S3 20% 10 min max. 5.7 m max. 250 kg max. 11.5 m max. 125 kg Fastening with two bar clips | Operator switch with emergency stop function | Guide roller with load hook | Motor with thermal switch | Automatic load securing brake | Load hook with safety catch | Automatic limit cut-out for rolling out 9.8 / 10.4 kg 2 355 x 240 x 140 mm Article number Weight net / gross 550 W S3 20% 10 min max. 5.7 m max. 300 kg max. 11.5 m max. 150 kg Fastening with two bar clips | Operator switch with emergency stop function | Guide roller with load hook | Motor with thermal switch | Automatic load securing brake | Load hook with safety catch | Automatic limit cut-out for rolling out 9.6 / 11.3 kg 2 355 x 230 x 145 mm 22.551.17 4 006825 539714 30 230 V ~ 50 Hz Article number 1000 W S3 20% max. 5.7 m max. 500 kg max. 11.5 m max. 250 kg Fastening with two bar clips | Operator switch with emergency stop function | Guide roller with load hook | Motor with thermal switch | Automatic load securing brake | Load hook with safety catch | Automatic limit cut-out for rolling out 15.1 / 16.5 kg 2 401 x 155 x 247 mm 22.553.13 4 006825 539721 Packing dimensions 230 V ~ 50 Hz Article number 1050 W S3 20% 10 min max. 5.7 m max. 600 kg max. 11.5 m max. 300 kg Fastening with two bar clips | Operator switch with emergency stop function | Guide roller with load hook | Motor with thermal switch | Automatic load securing brake | Load hook with safety catch | Automatic limit cut-out for rolling out 17.5 / 18.3 kg 2 400 x 150 x 255 mm 22.555.30 4 006825 584189 Packaging unit 230 V ~ 50 Hz Article number 22.557.11 4 006825 539769 ELECTRIC HOIST CHAIN HOIST BT-EH 1000 BT-CH 1000 SWING ARM GT-SA 1200 FOR HOISTS Length 1100 mm | With reach of 750 mm max. load 600 kg | With reach of 1100 mm max. load 300 kg 4 Article number 230 V ~ 50 Hz 1600 W S3 25% 10 min max. 5.7 m max. 999 kg max. 11.5 m max. 500 kg Fastening with two bar clips | Operator switch with emergency stop function | Guide roller with load hook | Motor with thermal switch | Automatic load securing brake | Load hook with safety catch | Automatic limit cut-out for rolling out 29.8 / 33.3 kg 1 570 x 255 x 340 mm 1000 kg 22.553.98 2.5 m 4 006825 540017 Closed metal housing | Load hook with safety catch | Long operator chain | Low design 8.5 / 9.4 kg 1 250 x 180 x 160 mm Article number 22.557.15 4 006825 539776 Article number 22.501.02 4 006825 539738 TOOL AND GEAR WAGGON PALLET TRUCK HAND TRUCK BT-TW 150 BT-PT 2500 BT-HT 100 est tool 201 2 DE: b DE: price/performance ”Very Good” max. 150 kg 4 x 45 mm 2 x 100 mm 1 x 200 mm 685 mm (Width) 875 mm (Height) 460 mm (Depth) max. 2500 kg 1150 mm Strong sheet steel frame | Non-slip work surface | 7 ball-bearing drawers (fully extendable thanks to telescopic rails) | 4 large easy-running wheels (of which 2 are steerable with locking brake) | Lockable 54.0 / 57.5 kg 1 730 x 800 x 505 mm Article number Folded 700 x 480 x 65 mm kg kg 85 mm / 200 mm Ø 180 mm Ø 80 mm 550 mm Selector lever for lift / neutral / lower | Safety handle with loop grip | Automatic return of the drawbar | Ball-bearing and PU-coated steering wheels and double load-bearing rollers 70.0 / 75.0 kg 4 006825 564136 Article number max. 100 kg Unfolded 985 x 480 x 420 mm 1 2100 x 560 x 740 mm 45.101.50 kg Steel frame | Fully retractable rubber wheels | Folding aluminium base plate | Pull-out handle | Rubber-coated handle | Lock for extending handle 3.7 / 4.4 kg 4 700 x 480 x 65 mm 20.225.25 4 006825 563221 Article number 22.601.13 4 006825 564082 31 32 LOG CUTTING SAW LOG CUTTING SAW LOG SPLITTER BT-LC 400/2 BT-LC 700 /1 D BT-LS 44 DE: price/performance ”Good – Very Good“ DE: price/performance ”Good“ DE: rating ”Good“ • Urteil Einhell BT-LS 44 230 V ~ 50 Hz 2200 W S6 40% HW / TCT t = 40 Ø max. 125 mm n0 = 2860 min-1 HW / TCT Ø 400 x Ø 30 mm Carbide metal saw blade | Carriage extension | Carriage with hooks | Length stop 33.1 / 39.1 kg 1 1100 x 745 x 520 mm 400 V 3 ~ 50 Hz 4500 W S6 20% CV t = 64 Ø max. 270 mm n0 = 1440 min-1 CV Ø 700 x Ø 30 mm Chrome vanadium sawblade | Ergonomically shaped carriage with hook | Including chassis | Carriage reset by springs | Electronic brake switch | Phase converter in plug 87.0 / 152.9 kg 1 1060 x 760 x 1150 mm Article number 43.071.62 4 006825 541434 230 V ~ 50 Hz 1500 W 4t 310 mm GUT 83,0 % Holzspalter im Einzeltest 09/2011 Ø 50 - 250 mm max. 370 mm 2.4 l Two-hand control | Transport handle | Stable foot | High quality electric motor | Overload release | Sturdy wheels 36.0 / 38.7 kg 1 810 x 290 x 468 mm Article number 43.071.72 4 006825 541472 Article number 34.320.13 4 006825 540062 LOG SPLITTER LOG SPLITTER LOG SPLITTER BT-LS 65 U BT-LS 610 B BT-LS 810 DB 230 V ~ 50 Hz 1500 W 230 V ~ 50 Hz 2200 W Ø max. 50 320 mm 5.5 t 390 mm 6t 470 mm 3.8 l Ø 50 - 250 mm max. 520 mm 3.2 l Two-hand control | Transport handle | Base frame | High quality electric motor | Overload release | Sturdy wheels 48.0 / 52.0 kg 1 1090 x 330 x 565 mm Article number Adjustable log holding plates | Height-adjustable workbench | Two-handed safety switch | Emergency stop switch | Adjustable splitting wedge height | Transport handle and wheels 83.0 / 97.6 kg 1 535 x 535 x 1160 mm 34.321.60 4 006825 554526 Weight net / gross max. 100 1040 mm Article number 3600 W Ø max. 50 400 mm 8t 480 mm 4l 100 - 1040 mm Adjustable log holding plates | Height-adjustable workbench | Two-handed safety switch | Emergency stop switch | Adjustable splitting wedge height | Transport handle and wheels 101.0 / 112.8 kg 1 560 x 560 x 1140 mm 34.320.45 4 006825 576856 Packing dimensions 400 V 3 ~ 50 Hz Article number 34.320.65 4 006825 576863 Packaging unit 33 GENERATOR GENERATOR GENERATOR GENERATOR BT-PG 850/2 BT-PG 2000/2 BT-PG 2800/1 BT-PG 3100/1 230 V ~ 50 Hz 650 W (max. 720 W) 1.2 kW (1.65 HP) 63 cm3 4,2 l Mixture 1 : 40 (2 ,5 %) Powerful 2-stroke engine, air-cooled | Synchronous generator | Carry handle for easy transport | Overload switch for appliance safety | Automatic voltage controller (AVR) | Reversing starter to start the machine 16.0 / 17.6 kg 1 390 x 350 x 335 mm Article number Weight net / gross 4.0 kW (5.4 HP) 196 cm3 13 l Petrol 4-stroke engine | Synchronous generator | Voltmeter | Tank indicator | Large 13 liter tank for continuous operation | Overload switch | Low oil guard | Crank shaft mounted at two ends | Automatic voltage controller (AVR) 36.9 / 40.0 kg 1 620 x 470 x 480 mm 41.512.45 4 006825 598452 34 2 x 230 V ~ 50 Hz 2000 W (max. 2200 W) Article number 4.1 kW (5.6 HP) 208 cm3 15 l Petrol 4-stroke engine | Synchronous generator | Practical voltmeter | Tank indicator | Large 15 liter tank for continuous operation | Overload switch | Low oil guard | Crank shaft mounted at two ends | Automatic voltage controller (AVR) 41.5 / 44.5 kg 1 625 x 465 x 475 mm 41.524.20 4 006825 575590 Packing dimensions 2 x 230 V ~ 50 Hz 2300 W (max. 2800 W) Article number 4.1 kW (5.6 HP) 208 cm3 15 l Petrol 4-stroke engine | Synchronous generator | Practical voltmeter | Tank indicator | Large 15 liter tank for continuous operation | Overload switch | Low oil guard | Crank shaft mounted at two ends | Automatic voltage controller (AVR) 42.4 / 45.5 kg 1 625 x 465 x 475 mm 41.524.80 4 006825 589399 Packaging unit 2 x 230 V ~ 50 Hz 2600 W (max. 3100 W) Article number 41.524.60 4 006825 589368 GENERATOR GENERATOR GENERATOR BT-PG 4000 BT-PG 5500/2 D BT-PG 5000 DD 400 V 3 ~ 50 Hz 2 x 230 V ~ 50 Hz 3000 W 3600 W (max. 5500 W) (max. 3300 W) 3000 W 1 x 12 V d.c. 400 V 3 ~ 50 Hz (max. 3300 W) (max. 100 W) 4200 W (max. 5000 W) 2 x 230 V ~ 50 Hz 4.89 kW / 3300 W (6.7 HP) (max. 3800 W) 24 l Petrol 7.0 kW (9.5 HP) 25 l 16 l Unleaded petrol 4-stroke engine | Practical voltmeter | Tank indicator | Large 24 liter tank for continuous operation | Overload switch | Low oil guard | Crank shaft mounted at two ends | Automatic voltage controller (AVR) 64.0 / 68.0 kg 1 710 x 545 x 605 mm Article number 4-stroke engine | Synchronous generator | Overload switch | Low oil guard | Crank shaft mounted at two ends | Automatic voltage controller (AVR) 76.0 kg | 80.1 kg 1 710 x 560 x 590 mm 41.524.40 4 006825 580051 Article number 6.3 kW (8.6 HP) Diesel 4-stroke digital inverter, air-cooled | Inverter technology for voltage-sensitive equipment (computers, measuring devices) | Voltage stability without fluctuations | Low oil guard | Overload switch | Automatic voltage controller (AVR) 144.0 / 157.9 kg 1 Suction hose lenghth 1.3 m | Volume 1.6 l max. 950 x 580 x 840 mm 41.525.00 4 006825 593761 PETROL AND OIL SUCTION PUMP Article number 41.523.95 4 006825 585193 Article number 34.070.00 4 006825 547276 Note: For safe handling of the products please refer to the instructions in the operating manual. 35 GB We´re always here to help - and that´s a promise! Is there anything you´d like to ask us about our products? Would you like to order a part? Your product isn´t working as it should? We´re at your service! We´ll get you some help - fast and without any fuss. iSC GmbH, Eschenstr. 6, 94405 Landau/Isar, Deutschland +49 (0) 9951 959 2000 (Landline charge 14 cent / min.) (Cell phone charge 42 cent / min.) +49 (0) 1805 835 830 www isc-gmbh.info info @ isc-gmbh.info Einhell Germany AG Wiesenweg 22 94405 Landau/Isar Germany © 2014 Einhell Germany AG www.einhell.com [email protected] Art. no. 110164 As of: December 2013 Subject to technical modifications and errors WELL DONE.