Download Fracarro SIG9708CI
Transcript
SMATV headend QPSK-PAL with CI SIG9708CI DIGIFLEX SMATV semi-modular headend for the reception and distribution of 8 digital satellite channels. It demodulates 8 digital channels and remodulates them into the RF band (47862MHz). The headend includes 8 QPSK receivers with CI slot, 8 A/V vestigial modulators, 8-way combiner with existing TV signal mixing and power supply unit. Two A/V input/output connectors are available to connect external devices to two receivers, to modulate signals from two external sources (DVD player, camera, etc) Characteristics: - Easy to install, included in each box is one power supply, 8 QPSK receivers with common interface slot, 8 A/V vestigial side full band modulators(47862MHz) with audio stereo, combiner to mix 8 RF channels, final amplifier 100dBµV per channel. - Very high output level: 100dµV per channel with separate regulation for each receiver. - Wide input level range to guarantee good reception of programs even when the signals are weak. - Master/slave setting available to share one smart card among several receivers, to decrypt several programs with only one subscription (if allowed by the pay-tv service provider). - Semi-modular philosophy enables you to add or remove single receiver modules. - DiSEqC 1.0, 4 positions 14/18V, 0/22KHz suitable to feed an LNB or to control multiswitch output. - Weighted C/N >57dB. - WSS signalling to automatically set the proper video format at the TV. - A/V output/input to connect two receivers to external modulators or to modulate signal from two external sources (DVD players, cameras, etc…) - Wall mount or 19” cabinet installation. - Removable front panel, with key lock to avoid common interface modules or cards being stolen. - Programmable via PC. - Firmware upgradable via PC on location. - Natural convection cooling, no fans inside reducing maintenance costs. Fracarro Code Item Packaging 283141 283142 283143 283144 SIG9708CI SIG9708CA SIG9708MR SIG9708PS Digital headend with 8 QPSK receivers with CI Cabinet for SIG9708CI headend, with power supply included but QPSK receivers QPSK CI receiver individually packed, ready to be installed into SIG9708CA Power supply for SIG9708CI individually packed SIG9708CI Fracarro Code Front-End Satellite Input frequency Bandwidth Input level Input step tuning DiSEqC Demodulation FEC Symbol rate Modulation Modulator Standard Output frequency Output channels Max. output level per channel Output level adjustment TV mixing input TV mixing insertion loss Video Decoder Video decoder Video format Audio Decoder Audio Decoder Audio format General Features Mains voltage Power consumption Connectors A/V connectors Dimensions (l × h × d) Operating temperature Compliant Programming unit 283141 MHz MHz dBμV MHz 950-2150 36 43-84 1 0/14/18VDC 0/22KHz DiSEqC 1.0 QPSK compliant ETS 300421 AUTO Ms/sec 1-45 (compatible SCPC/MCPC) VSB PAL B,G Stereo 47-862 E2-E69 100 0-10 47-862 4 MHz dBμV dB MHz dB MPEG-2, Main Level @ Main Profile 4:3, 16:9, pan scan, letter box, adapted MPEG-2 Layer I and Layer II Stereo, dual sound V, Hz W type 220–240, 50-60 130 F female SUB-D 9 pin 430×305x200 -10 to +45 EN50083-2, EN60065, EN50221, ETSI TS101699 TPE (not included) mm °C Fracarro Code Item Packaging Quantity Dimensions Weight Total weight 283141 283142 283143 283144 SIG9708CI SIG9708CA SIG9708MR SIG9708PS Single Single Single Single pcs 1 1 1 1 mm 430×305x200 430×305x200 300×200x100 300×200x100 Kg 12.000 11.000 0.722 1.600 Kg 13.000 11.000 0.722 1.675 SMATV headend COFDM – PAL with Common Interface SIG9808CI DIGIFLEX SMATV semi-modular headend for the reception and distribution of 8 digital satellite channels. It demodulates 8 digital channels and remodulates them into the RF band (47862MHz). The headend includes 8 OFDM receivers with CI slot, 8 A/V vestigial modulators, 8-way combiner with existing TV signal mixing and power supply unit. Two A/V input/output connectors are available to connect external devices to two receivers, to modulate signals from two external sources (DVD players, cameras, etc) External input loop-through available using the active tap SIG9808LT. Main Specifications: - - Easy to install, included in each box is one power supply, 8 OFDM receivers with common interface slot, 8 A/V vestigial side full-band modulators (47862MHz) with audio stereo, combiner to mix 8 RF channels, final amplifier 100dBµV per channel. Very high output level: 98dµV per channel with separate regulation for each receiver. - Wide dynamic input range to guarantee good reception of programs even when signals are weak. - Master/slave setting available to share one smart card among several receivers, to decrypt several programs with only one subscription (if allowed by the pay TV service provider). - Highly flexible - up to 8 modules, either COFDM or QPSK, can be added together. - Remote power supply from each receiver to feed preamplifier (max 400mA @ 14V). - WSS signalling to automatically set the proper video format on the TV. - Weighted C/N >56dB. - A/V output/input to connect two receivers to external modulators or to modulate signals from two external sources (DVD player, camera, etc…) - Wall mount or 19” cabinet installation. - Removable front panel, with lock to avoid common interface modules or cards being stolen. - Programmable via PC. - Firmware upgradable via PC on location. - Natural convection cooling, no fans inside, reducing maintenance costs. Fracarro Code Item Packaging 283145 283146 283147 283142 283144 SIG9808CI SIG9808MR SIG9808LT SIG9708CA SIG9708PS Digital headend with 8 OFDM receivers with CI OFDM receivers in individual packaging, ready to be installed in SIG9708CA External active loop-thorugh for SIG9808CI, gain 0dB Cabinet for Digiflex headend with power supply included but without OFDM receivers Power supply for Digiflex in individual packaging SIG9808CI Fracarro code Front-End COFDM Input frequency Input level Input step tuning Demodulation FEC Carriers Modulation Guard interval AFC Range Modulation Modulator Standard Output frequency Output channels Max. output level per channel Output level adjustment Weighted C/N TV mixing input TV mixing insertion loss Video Decoder Video decoder Video format Audio Decoder Audio decoder Audio format GeneralFfeatures Mains voltage ~ Power consumption Remote power supply Connectors A/V connectors Dimensions (L × H × W) Operating temperature Compliant Programming unit 283145 MHz dBμV KHz KHz MHz dBμV dB dB MHz dB 174-230, 470-862 35-80 166.7 ETS 300744 1/2, 2/3, 3/4, 5/6, 7/8, AUTO 2K, 8K QPSK, 16-QAM, 64-QAM 1/4, 1/8, 1/16, 1/32 ± 285 (2K), ± 142 (8K) Vestigial side band PAL B,G Stereo 47-862 E2-E69 100 0-15 > 56 47-862 2 MPEG-2, main level @ main profile Pan scan, letterbox, combined, 16:9 MPEG-2 layer I and layer II Stereo, Dual sound V, Hz W mA tipo mm °C 220-240, 50-60 110 400 @ 14V F female SUB-D 9 pin 430×305x200 -10 to +45 EN50083-2, EN60065, EN50221, ETSI TS101699 TPE SIG9808LT Fracarro code Input frequency Tap loss Max output level (IM3 -54dB) Absorption MHz dB dBμV mA 283147 47-862 0 96 60 @ 12V Installation examples When the input signal is strong it is possible to split it several times without causing a problem to the receiver SIG9808LT When the input signal is weak it is possible to perform an RF loopthorough with the amplified tap SIG9808LT (0dB loss) fed from each receiver. It is possible to carry on the decoded mux (even the unscrumble key when allowed by the brodcaster) to other modules using a flat cable. Ch Ch Ch Ch Ch Ch 52 52 52 52 52 52 H V H V It is possibile to install an SIG9708CI and SIG9808CI together to distribuite all the received programs. Fracarro Code Item Packaging Quantity Dimensions Unit weight Total weight 283145 283142 283146 283147 283144 SIG9808CI SIG9708CA SIG9808MR SIG9808LT SIG9708PS Single Single Single Single Single pcs 1 1 1 1 1 mm 430×305x200 430×305x200 300×200x100 48x50x20 300×200x100 Kg 12.000 11.000 0.722 0.058 1.600 Kg 13.000 11.000 0.722 0.058 1.675