Transcript
BACKPLANE CBP-2131SAS In this case you can trust! Product Form Factor Interface (HDD/SSD) Accessories 2x 5,25" for 3x 3,5“ or 2,5“ HDDs/SSDs SATA I, SATA II, SATA III, SAS CBP-2131SAS – The new backplane CBP-2131SAS sets the standard with the patented anti-vibration design. Like no other backplane makes it suitable for diverse applications. The chassis is made of high quality aluminum and requires only two 5.25" and provides space for three 3.5" or 2.5" hard drives or SSDs. Supports both SATA I/II/III and SAS I/II. Technical Data Interface (HDD/SSD): Dimension (DxWxH): Weight: Form Factor: Cooling: Power Connector: Data Interface (ext.): Supported Raid-Level: Special Features: Scope of delivery: Warranty: SATA I, SATA II, SATA III, SAS 207mm x 146mm x 86mm 1,09 kg 2x 5,25" bays for 3x SATA/SAS HDDs/SDDs (3,5“ or 2,5”) 70mm fan 2x SATA 3x SATA 0, 1, and 5 (no Raid controller is included) Fan Failure detection LED Reset switch for buzzer alarm Overheating LED Up to 6Gbps data transfer rate (SATA III / SAS) SATA /SAS Backplane, 4x SATA cable (60cm), set of screws, User manual (engl.) 24 Month features Professional Data Backup Hot Swap Plug & Play compatible Lock mechanism with key Space saving The listed specifications may be altered at any point in time without any pre-notice. Chieftec® is a registered trade mark. All other brands and/or logos are property of the respective owners. Arena Electronic GmbH Halskestraße 22 -26 DE-40880 Ratingen www.chieftec.eu Tel. +49 2102 56 0 77 - 0 Fax. +49 2102 56 0 77 – 99 Email: [email protected]
