Transcript
DPS1 Linear Power Supply/Charger Rev. DSDPS1 - A23F Overview • This unit converts a low voltage AC input into 6VDC, 12VDC or 24VDC output. These general purpose power supplies have a wide range of applications for access control, security and CCTV system accessories that require additional power. Specifications • 6VDC, 12VDC or 24VDC selectable outputs. • 1.2 amp @ 6VDC or 12VDC supply current or .75 amp @ 24VDC supply current. • Filtered and electronically regulated output. • Short circuit and thermal overload protection. • Battery short circuit protection (circuit breaker). • Built-in charger for sealed lead acid or gel type batteries. • Maximum charge current .3 amp. • Automatic switch over to stand-by battery when AC fails (zero voltage drop). • AC input and DC output LED indicators. • Extremely compact design. • Includes Snap Trac (Altronix model # ST3) and mounting clips for DIN Rail mounting capability. ST3 Mechanical Drawing .875 .125 .625 .3125 3.4375 3.25 2.6875 2.75 Board Dimensions (approximate): 3”L x 2.5”W x 1.5”H 0.13" 0.13" Ø0.156" 2.3" 2.8" 3.0" 2.5" Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
