Transcript
SMP10C12X Power Supply/Charger Rev. DSSMP10C12X - A26F Overview • This power supply/charger will convert a 115VAC / 60Hz input, into a regulated 12VDC output @ 10 amp continuous supply current (see specifications). Specifications • • • • • • 12VDC outputs. 10 amp supply current. Filtered and electronically regulated outputs. Short circuit and thermal overload protection. Input 115VAC / 60 Hz., 1.45 amp. Built-in charger for sealed lead acid or gel type batteries. • Maximum charge current .7 amp. • Automatic switch over to stand-by battery when AC fails (zero voltage drop). • Power ON/OFF switch. • AC input and DC output LED indicators. • Power supply, enclosure, cam lock & battery leads. • Enclosure: - Combination knockouts are 1/2” and 3/4” - Accommodates up to two (2) 12VDC/7AH batteries. • Product weight: - SMP10C12X: 8.4 lbs. • Shipping weight: - SMP10C12X: 9.4 lbs. Enclosure Dimensions 13”H x 13.5”W x 3.25”D 3.25" TOP ONLY 1.1875" 0 3.25" 1.1875" 0 0 .75" 1.5" 6.25" 11" 11.75" 12.5" 0 0 .81" 1.4" 1.4" 5.5" 6.5" 11.66" 12.1" 13" Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com 1.1875" 3.25"
