Transcript
10/100Mbps Auto-Negotiation Ethernet Adapter Description: : M-NTPCI100 is a PCI2.2 compliant 10/100M auto-negotiation Ethernet adapter. It meets ACPI power management standards and has a remote boot function. M-NTPCI100 provides a reliable and efficient hardware solution for wired networking to your PC. Features: : • • • • • • • Complies with IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX standards Complies with PCI and PCI2.2 standards Supports 32-bit PCI-Bus Revision2.1 Supports clock frequency of up to 40MHz Auto-negotiation 10/100Mbps LAN port Supports full-duplex and half-duplex modes ACPI power management Specification: : Chipset ADMTek AN983B Standard and Protocol IEEE802.3 IEEE802.3x BUS Type 32bit /33MHz PCI BUS Network Interface RJ45 I/O Address System auto assign Disconnected ( IRO) System auto assign Half/Full Rate Duplex Transfer Operating Temperature Operating Humidity IEEE802.3u 10/20Mbps 100/200Mbps 0℃~40℃(32F-112F) 10%-90% (non-condensing)