Transcript
CONCEPT1-KIT 100V Conversion kit for CONCEPT1 The CONCEPT1T-KIT allows you to convert a low impedance Concept1 into a 100V amplifier. The kit contains 2 transformers and fixation screws. The circuit board of the unit has been pre-equipped to accommodate the transformers, so the conversion is a quick, hassle-free operation. Thanks to this conversion kit, CONCEPT1 is a very versatile amplifier that can be used in both low-impedance and 100 V situations. APart products have been designed with installer's ease in mind! TECHNICAL SPECIFICATIONS Maximum 60 Watts of 100 V speaker per output, this corresponds to an impedance of minimum 167 Ohm. WWW.APART-AUDIO.COM [email protected]