Download iGo PS00272-0003 mobile device charger
Transcript
splitter_UG_2.qxp:Layout 1 Specifications Input Voltage: 5.85 VDC Input Current: 0-0.85A Output Power: 4.2W shared between both outputs 4/13/07 2:39 PM Page 1 power splitter For use with: Package Contents • Power splitter unit • User Guide User Guide Congratulations on your iGo® power purchase! Universally compatible with today's popular brands, the iGo power splitter accessory allows you to use select iGo chargers to charge two gadgets simultaneously such as a mobile phone and MP3 player or a smartphone and Bluetooth® headset, GPS devices and more (iGo chargers and power tips sold separately). It's simple! Just plug into a compatible iGo charger and use the appropriate power tips for each of your gadgets. No other solutions are as powerful or as versatile as the iGo line of power products. For additional compatibility information and to purchase iGo power tips, visit www.iGo.com. Tel: 1-480-596-0061, 1-888-205-0093 www.iGo.com © 2002-2007 Mobility Electronics, Inc. Mobility Electronics, iGo and iGo dualpower are registered trademarks and one charger. all your gadgets. simply switch the tip. is a trademark of Mobility Electronics, Inc. All other brand names and logosare trademarks of their respective owners. Specifications are subject to changewithout notice. Protected under one or more of the following patents: 5,347,211; 6,064,177; 6,643,158; 6,650,560; 6,700,808; 6,751,109; 6,775,163; 6,791,853; 6,920,056; 6,937,490 and 6,976,885. Other United States and foreign patents pending. Made in China. P/N 8040350-01 Rev. C A/W 8330350-01 REV. C Material: 80g art paper Works with select iGo chargers including: iGo® everywhere iGo® auto iGo® wall iGo® everywhere15 iGo® auto15 elite iGo dualpower® accessory (sold separately) splitter_UG_2.qxp:Layout 1 4/13/07 2:39 PM Page 3 Quick Connect Guide IMPORTANT NOTICES Please read the following carefully before using the iGo® power splitter. When using iGo power splitter to charge two devices, the maximum power output of your iGo charger is shared between both devices. Most individual devices and combinations of devices should charge. However, if a device attached to iGo power splitter is not charging or is displaying an abnormal charging indication, it may need more power than can be delivered at that particular time. If this occurs, try one or more of the following: iGo® chargers (sold separately) 1. Turn off the device(s) 2. Detach one of the devices 3. If the problem persists, remove the splitter and connect your device and the appropriate tip directly to your iGo charger. Note: The iGo power splitter may not support devices that have completely dead batteries. These types of devices may need to charge alone before attempting to share power or may need to charge in the “off” state while sharing power. COMPATIBILITY The following iGo power tips will not work with iGo power splitter: A06, A07, A08, A15, A17; A01 Rev. 01 and A61 Rev. 01. Check the label on your tip to verify. iGo® power tips (sold separately)