Download Panduit STP RJ-45 TG-MiniJack kat5E
Transcript
TX6 PLUS and TX5e Shielded Jack Modules Part Numbers: CJS688TG, CJS688TGY, CJS5E88TG, CJS5E88TGY INSTALLATION INSTRUCTIONS PN399A © Panduit Corp. 2006 FTP / ScTP Overall Foil Screen 2.0 in (50.8 mm) Conductors .5 in (12.7mm) Drain wire S-FTP Overall Foil Screen Strain Relief Collar 2.0 in (50.8 mm) Conductors Braid CWST .5 in (12.7 mm) STP / PIMF Individual Foil Pair Screen Wire Cap White - TX6 PLUS Red - TX5e 2.0 in (50.8 mm) Conductors CWST Braid .5 in (12.7 mm) Jack TERMINATION STEPS 2 1 Cable End 1 3 Cable End 2 4 " " " " 2 1 Trim pair separator and/or rip cord if present. 5 Pr3 Pr2 Pr1 Pr4 6 Cable End 2 Cable End 1 Pr4 Pr3 Pr2 Pr1 For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2 INSTALLATION INSTRUCTIONS PN399A 7 8 CWST T568B T568A Cable End 1 Cable End 1 1 9 2 2 1 A B 3 10 EGJT Cable End 2 Cable End 2 2 1 11 EGJT 2 A 1 B 3 A B 3 12 CJSGK-X KIT See note 5. See note 4. REMOVAL STEPS 1 2 3 Notes: 1. For specified performance, follow TIA/EIA 568-B installation guidelines. 2. Jack Modules can terminate PVC or LSZH rated 22-26 AWG solid or stranded IWC cable with 0.048 inch (1.2 mm) maximum insulated conductor outside diameter. 3. Jack Modules may be re-terminated a minimum of 20 times. 4. On cable end 2 for A & B wiring and cable end 1 of A wiring, wrap the designated pairs around the proper center dividing post (A or B) and terminate in the proper location. 5. CJSGK-X Grounding Kit is REQUIRED for all MINI-COM Modular Patch Panels, but is optional for MINI-COM All Metal Shielded Modular Patch Panels. 6. For technical and performance information, consult PANDUIT Technical Support. As with all Wiring Accessories, the following statements apply: 1. Never install communications wiring during a lightning storm. 2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations. 3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface. 4. Use caution when installing or modifying communication wiring. E-mail: [email protected] For Instructions in Local Languages and Technical Support: http://www.panduit.com/resources/install_maintain.asp www.panduit.com Page 2 of 2 Fax: (708) 444-6993