Download Kramer Electronics W-LM
Transcript
The Kramer Volume Control and Switch for Insert Plates Figure 2 shows the wiring connections of the W-LM. Congratulations on purchasing your Kramer W-LM which is ideal for the following typical applications: • Audio installations in hotels • Presentation and training rooms The Kramer W-LM is a combined volume control and push-ON/push-OFF switch module that fits into a single slot of any Kramer insert plate, such as the FLA-2F. Figure 1 and Table 1 define the W-LM. Figure 2: W-LM Wiring Connections Table 2: W-LM Terminal Block Wiring # Volume control start (CCW) 2 Volume control wiper 3 Volume control end (CW) 4 5 Figure 1: W-LM Front and Rear Table 1: W-LM Front and Rear Features # Feature Function 1 Screw holes Insert module fixing screws 2 ON/OFF Switch and Volume Knob Push knob to toggle ON/OFF. Rotate knob clockwise to increase volume, anti-clockwise to decrease volume 3 Module Terminal Block Connect to the cabling (see Figure 2 and Table 2) To install the W-LM: 1. Connect the cabling to the removable portion of the terminal block paying attention to the wiring diagram shown in Figure 2 and Table 2. 2. Plug the removable portion of the terminal block into the socket on the W-LM module. 3. Insert the W-LM module in the required slot of the insert plate. 4. Insert the two screws to secure the module in place and tighten the screws. Function 1 SPST switch W-LM Volume Control and Switch Installation Instructions For the latest information on our products and a list of Kramer distributors, visit our Web site at www.kramerelectronics.com Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: [email protected] P/N: 2900-000625 REV 1A