Download AirLive WMK-AIRMAX mounting kit
Transcript
WMK-AIRMAX Mounting Kits for AirMax5 User’s Manual 1. How to Use WMK-AIRMAX 1. How to Use WMK-AIRMAX The optional WMK-AIRMAX metal pole/wall mount kit allows your AirMax5 to be mounted on the wall and pole. It enables you to tilt the AirMax5 to the desire vertical angle. If you have purchased such kit, please follow the instruction below to mount your AirMax5. 1.1 Wall Mount Installation using WMK-AIRMAX 1. Please first install the screw anchors into the wall 3. Install the AirMax5 into the Metal Bracket and tighten the screws on the bracket. 2. Secure the screws through the Metal Bracket into the screw anchors 3 1 2 4. By adjusting the bracket screws, you can adjust the tilting angle of the AirMax5 Bracket Screw 1 1. How to Use WMK-AIRMAX 1.2 Pole Mount Installation using WMK-AIRMAX 1. Unscrew the metal ring(pipe fastener) until one end of the ring come off completely 2. Put the metal ring through the holes on the bracket and wrap it around the pole. 3. Tighten the screw on the ring until the ring is very tight around the pole. 2 1 3 4. Now, install the AirMax5 into the metal bracket and tighten the screws on the bracket 5. By adjusting the bracket screws, you can adjust the tilting angle of the AirMax5 5 Bracket Screw 4 2