Download Atdec VF-AT-D/TAA flat panel desk mount
Transcript
Technical Specifications A General Features Maximum Load: 8kg (17.5lbs) per display. Included Hardware: All fasteners and mounting hardware are included. Display Compatibility: Visidec Focus Articulated Arm Double is compatible with most Flat Panel Displays between 12” and 24” (30cm and 61cm) that feature either 75mm x 75mm or 100mm x 100mm VESA mounting hole patterns. Tools Required: Power drill, 9mm (³/8”) drill bit, Phillips Head screwdriver. Mounting Options: Visidec Focus Articulated Arm Double includes Bolt Through and Desk Clamp mounting options. NOTE: Desk Clamp mounting option is only suitable for displays in side by side configuration. Bolt Through Suits desktop thicknesses of 12mm - 40mm (0.5”-1.5”) Colour: Polished Silver. Warranty: 10 years limited IMPORTANT: Please read the Installation Instructions before mounting Visidec Focus Articulated Arm Double Desk Clamp Suits desktop thicknesses of 12mm - 38mm (0.5”-1.5”) B Cable Management: Cable management system includes cable slot and cable management clips. Range of Movement 2 1 5 3 4 6 1 +/-70° tilt adjustment 2 +/-95° portrait/landscape adjustment 3 180° pan adjustment 4 360° articulation of arms 5 240° rotation at shoulder 6 315mm (12.5”) height adjustment range NOTE: The back to back display configuration shown can only be used in conjunction with the Bolt Through mounting option. The range of movement shown here applies to both arms of Visidec Focus Articulated Arm Double. C Overall Dimensions NOTE: The back to back display configuration shown (below left) can only be used inconjunction with the Bolt Through mounting option. 467mm (18.39”) 68mm (2.68”) 150mm (5.91”) 195mm (7.68”) 54mm (2.5”) The range of movement shown here applies to both arms of Visidec Focus Articulated Arm Double. Max. width 780mm (30.71”) 440mm (17.32”) (450mm (17.75”) when using Desk Clamp) Maximum distance to centre of display 440mm (17.32”) 39mm (1.5”) When positioning displays side-by-side (above) the maximum display width is 780mm (30.71”) D The FlexiStar™ mechanism E Min/Max Display Distance VESA Mounting Plate in 100mm x 100mm position 90mm (3.54”) 934mm (360.75”) VESA Mounting Plate in 75mm x 75mm position 90mm (3 9/ 16”) 75mm Min. Max. 100mm NOTE: The Visidec Focus Articulated Arm Double can be configured so that the displays are positioned side by side. 75mm The maximum distance from the pole to the back of the display will be determined by the size of the displays. 100mm F Max. Desk Mounting Options Desk Clamp Bolt Through Desk Clamp suits desktop thicknesses of 12mm - 38mm (0.5”-1.5”) Bolt Through suits desktop thicknesses of 12mm - 40mm (0.5” - 1.5”) 39mm (1.5”) 75mm (3”) 38mm (1.5”) 12mm (0.5”) DESK 65mm (2.56”) 52mm (2.05”) 52mm (2.05”) No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 20.05.11©