Transcript
Dual Charging Station SET-UP/CHARGING: PACKAGE CONTENTS: • Dual Charging Station • Power Pass-thru Cable • 2 Rechargeable Battery Packs • 2 Battery Pack Charging Adapters • User’s Guide/Warranty Card • Registration Card 1. Remove the battery cover on your Wii Remote and remove any batteries that may be installed. 2. Replace the original batteries and cover with one of the included Rechargeable Battery Packs. 3. With the Dual Charging Station properly connected to your Nintendo Wii, place one or two Wii Remotes into the charging docks. Note: Battery Packs can be charged alone by inserting the included Battery Pack Charging Adapter into the dock before inserting the Battery Pack (see below). Using the included power pass-thru cable: step 1 Connect to Charging Dock (input) step 2 Connect to the Wii AC adapter (input) 4. Charging will begin automatically. The RED LED indicates charging, the BLUE LED indicates a full charge. 5. The Charging Dock charges your Wii Remotes even if your Wii console is powered OFF. 6. The blue accent lighting can be turned on or off by switching between the OFF and ON options on the back of the Dual Charging Station. Wii AC adapter (input) FOR TECHNICAL SUPPORT PLEASE CONTACT: 1-877-999-DREAM or [email protected]