1
Download 1-2.SVS151 Series - Manuals, Specs & Warranty
Transcript
SVS151 Series SERVICE MANUAL Ver.4-2012K Revision History Model Lineup SVS15119FJB SVS15119FJS SVS1511AGJB (Japan) SVS1511AJ SVS15113FXB SVS15113FXS SVS15115FXB SVS15116FXB US SVS15116FXS (United States) SVS15118FXB SVS15118FXS SVS151190X SVS1511GFYB SVS15115FBB SVS15115FDB PA SVS15115FLB SVS15117FDB (Pan-America) SVS15117FLB SVS151190S SVS1511C5E SVS1511L3ES SVS1511M3EW SVS1511N3ES SVS1511Q9EB SVS1511R9ES SVS1511S3RB SVS1511S9ES EU SVS1511T9EB (Europe) SVS1511T9ES SVS1511U9ES SVS1511V9EB SVS1511V9ES SVS1511V9RB SVS1511W9EB SVS1511X9EB SVS1511X9RB SVS15115FGB SVS15115FHB SVS15115FKB SVS15115FNB AP SVS15115FWB SVS15116GAB (Asia-Pacific) SVS15116GGB SVS15116GKB SVS15116GNB SVS15116GWB SVS151100C CN SVS15118ECB (China) SVS15118ECW : CTO Model JP 9-890-888-04 l a i t n e d i f n o C y n So Design and specifications are subject to change without notice. PERSONAL COMPUTER Service and Inspection Precautions Sony, VAIO and CLIE are trademarks or regisSony regis teredtrademarks of Sony. Microsoft, Windows, Windows Media, Outlook, Bookshelf and other Microsoft products are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. The word Bluetooth and the Bluetooth logo are trademarks off Bluetooth Bl t th SIG, SIG Inc. I AMD the AMD, th AMD logo, l other th AMD product names and combinations thereof are trademarks of Advanced Micro Devices, Inc. Intel Inside logo, Pentium, Celeron and Core are trademarks or registered trademarks of Intel Corporation. Transmeta, the Transmeta logo, Crusoe Processor, the Crusoe logo and combinations th thereof f are trademarks t d k off Transmeta T t Corporation C ti in the USA and other countries. Graffi ti, HotSync, PalmModem, and Palm OS are registered trademarks, and the Hotsync logo and Palm are trademarks of Palm, Inc. or its subsidiaries. (M) and Motrola are trademarks of Motrora, Inc. Other Motrola products and services with (R) mark like Dragomball are the trademarks of Motrola, Inc. All other names of systems, products and services in this manual are trademarks or registered tradeMarks of their respective owners. In this manual, the (TM) or (R) mark are not specified. Caution Markings for Lithium/Ion Battery - The following or similar texts shall be provided on battery pack of equipment or in both the operating and the service instructions. 1. Obey precautionary markings and Instructions CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent i l t type t recommended d d by b the th manufacturer. Discard used batteries according to the manufacturer’s instructions. Labels and stamps on the cabinet, chassis, and components identify areas requiring special precautions Be sure to observe these precautions, cautions. precautions as well as all precautions listed in the operating manual and other associated documents. CAUTION: The battery pack used in this device may present a fi re or chemical burn hazard if mistreated. Do not disassemble, heat above 60̓ C (140 F) or incinerate. i i t Dispose Di off used d battery b tt promptly. Keep away from children. 2. Use designated parts only The set’s components possess important safety characteristics, h t i ti such h as noncombustibility b tibilit and d the ability to tolerate large voltages. Be sure that replacement parts possess the same safety characteristics as the originals. Also remember that the Μmark, which appears in circuit diagrams and parts lists, denotes components that have particularly important safety functions; be extra sure to use only l th the d designated i t d components. t CAUTION: Changing the back up battery. • Overcharging, short circuiting, reverse charging, multilation or incineration of the cells must be avoided to prevent one or more of the following occurrences; release of toxic materials, release of hydrogen and/or oxygen gas, rise in surface temperature. • If a cell has leaked or vented, it should be replaced immediately while avoiding to touch it without any protection. 3. Always follow the original design when mounting parts and routing Wires The original layout includes various safety feafea tures, such as inclusion of insulating materials (tubes and tape) and the mounting of parts above the printer board. In addition, internal wiring has been routed and clamped so as to keep it away from hot or high-voltage parts. When mounting parts or routing wires, therefore, be sure to duPli t th Plicate the original i i l llayout. t 4. Inspect after completing service After servicing, inspect to make sure that all screws, components, and wiring have been returned to their original condition. Also check the area around the repair p location to ensure that repair work has caused no damage, and confirm safety. 5. When replacing chip components... Never reuse components. Also remember that the negative side of tantalum capacitors is easily damaged by heat. 6. When handling flexible print boards... • The temperature of the soldering-iron tip should be about 270̓ C. • Do not apply the tip more than three times to the same pattern. • Handle patterns with care; never apply force. Caution: Remember that hard disk drives are easily damaged by vibration. Always handle with care. The components identified by mark contain confidential information. Strictly follow the instructions whenever the components repaired and/or replaced. 2 [Sony Confidential] SVS151 Series (9-890-888-XX) TABLE OF CON NTENTS Section Title Page Section CHAPTER1. BLOCK DIAGRAM 1-1. SVS151 Series ((For Ext-Gfx model)) ……………………… 1-1 1 1 1-2. SVS151 Series (For Int-Gfx model) ……………………… 1-2 (to 1-2) CHAPTER2. FRAME HARNESS DIAGRAM 2-1. SVS151 Series (TOP)…………...………………………… 2-1 2 2 SVS151 Series (BOTTOM) 2-2. (BOTTOM)………………………………… 22 2-2 (to 2-2) CHAPTER3. EXPLODED VIEWS AND PARTS LIST Note……………………………………………………………….… 3-2 Screws S-1. Screws………………………………………….……......... 3-3 Palmrest P-1. Palmrest………………………………………….......…..… 3-4 Main Board M-1 M 1. Main Board (For Ext-Gfx Ext Gfx model)…………………………. model) 35 3-5 M-2. Main Board (For Int-Gfx model)………………………… 3-6 Bottom B-1. Bottom………………………………………………..……… 3-7 ODD D 1 ODD………………………………………………………… D-1. ODD 3-8 HDD H-1. HDD…………………………………………………………… 3-9 LCD L-1. LCD …………………………………………………… 3 3-10 10 Accessories A-1. Accessories…………………………..…………………3-11 WWAN DIP Switch………………………………………………… 3-12 (to 3-12) Title Page CHAPTER4.OTHERS 4-1. Note for WWAN Board Replacement p …………………… 4-2. Note for WIMAX Board Replacement …………………… 4-3. Holding Method of Main Board……………..…………… 4-1 4 1 4-2 4-3 (to 4-3) x SPECIFICATIONS are listed on Page 3-1 of “CHAPTER3. EXPLODED VIEWS AND PARTS LIST. x History of the changes is shown as the “Revision History” at the end of this data. 3 [Sony Confidential] SVS151 Series (9-890-888-XX) CHA APTER1. BLOCK DIA AGRAM 1-1.SVS151 Series (For Ext-Gfx model) KusanagiB Chief River Platform+ nVidia N13P Hybrid Graphics+8pcs VRAM /KusanagiB Chief River Platform+ Internal Graphics dGPU VRAM 1G/2G (64Mx16bitx8 128Mx16bx8) PCIE X8 (Gen 2) (64bit x 2) Page 34~39 29mm X 29mm DDR3 1333/1600 MHZ DDR3L 1333MHZ IVY Bridge QC(SV) NVIDIA N13P_LP DDR3 VRAM BGA-1224 (1224-pin BGA) TDP 35W Page 25~33 Channel B SO-DIMM 0 204 pin Page 19 DDR3 1333/1600 MHZ DDR3L 1333MHZ 31mm X 24mm Channel A 4GB/2GB On Board Page 20~24 Page 3~9 BOM control for internal GFX SKU FDI DMI X4 PECI CHARGER TI BQ24725RGRR GbE Controller HDMI TMDS 3 PCIE(Gen 2) Page 43 LVDS 15.5'' FHD_1920 x 1080 Page 41 Docking CRT CRT Converter ANX9832 HM7 TDP 4W 989 Ball FCBGA 25 mm X 25 mm Page 40 Converter DDPD ANX9835 HDMI 2 USB 3.0 9 CRT (USB2.0 x 14) (USB3.0 x 4) (PCIE x 8) (SATA x 6) On MS_SD DB SYSTEM 3V/5V SN0608098RHBR Transformer Docking INPUTS Transformer RJ45 Transformer RJ45 LAN HUB(Realtek) RTL8365MB SSD 2con RAID (SATA0,1) 1(6Gb/s) INPUTS RJ45 DC_IN Transformer Page 49 USB 2.0 SATA 0(6Gb/s) Transformer Page 49 Page 48 PCH (PPT) Panther Point-M LVDS SW REALTEK RTL8111F 3 DCBATOUT Page 10~18 HDD (SATA0) Int. DMIC Button -Power -ASSIST -Web -VAIO -ODD Eject Headphone jack stereo HDA Audio Codec w/ HWEQ REALTEK ALC275 Page 50 SPI LPC USB HUB GENESYS86%[ GL852G-MNGXX 5 USB to SATA GM20339F CPU 1.8V RT8068AZQW SATA x1 INPUTS 1 System BIOS 64M bitX1 0 +3VALW USB 3.0 *1 Page 55 Microphone jack stereo 3 4(1.5Gb/s) Switchs -Battery off switch -LID switch -Performance SPEED Switch USB 2.0 *3 On LED DB USB 3.0 *1 2 SATA ODD H=9.5mm Page 55 +5VALW Page 51 Int. Speaker LEDs -Power -Charge -Keyboard num/caps/scr lk -HDD/Optical Disc Drive -Wireless -Camera -MS/SD LPC On MS_SD DB 2 TPM DB EC SMSC MEC1621 (BGA-176pin 0.5pitch) SLB 9635 TT 1.2A SMBus Debug Port Page 46 1 R5G05000N753NF Page 44~45 SMBbus Charger Fingerprint DB 10 PS/2 Camera Page 52 13 BluetoothPage 60 PCH/SMBus 11 WWAN Page 57~59 On MS_SD DB G-Sensor Touch PAD Connector K/B W/backlight Connector Page 61 Lid Switch2 Lid Switch1 No use on Speed DB Touch PAD (Clickpad) W/ Back light keyboard LEDs on LED DB FAN1 DPWM Page 47 Switchs On MS_SD DB FingerPrint BQ24725RGRR SMBus/SPI LIS331DLHTR SD Card VT370FCX-ADJ 8 Page 78 MS Card REALTEK RTS5209-GR WLAN/WiMAX Intel kilmer peak 2*2 Page 56 WLAN 9 Battery ID Page 80 Memory Card controller SIM Card DB +5VALW Light Sensor BH1621FVC-TR 1 switch DB on Speed DB Charge IC TPS2540ARTER INPUTS DGPU 1.5V USB 2.0*1 Page 54 +5VALW Page 54 Thermal Sensor G709T1UF (H/W shutdown) For CPU Page 62 Thermal Sensor G709T1UF (H/W shutdown) For GPU Page 62 Thermal Sensor G709T1UF (H/W shutdown) For Ambient Page 62 Thermal sensor W83L771AWG (SKIN) Page 62 1--1 Thermal Diode (DDR) Page 62 +1_05V_PCH INPUTS Thermal Diode (build up in dGPU) Page 31 [Sony Confidential] Title Size Date: SVS151 DGPU Series (9-890-888-XX) NVVDD Document Number Rev Sheet VT358FCX-ADJ 8 INPUTS +5V_ALW OUTPUTS NV_VDD 1-2.SVS151 Series (For Int-Gfx model) KusanagiB Chief River Platform+ Internal Graphics DDR3 1333/1600 MHZ DDR3L 1333MHZ IVY Bridge DC(SV) /Sandy Bridge DC(SV) BGA-1023 (1023-pin BGA) TDP 35W Channel B SO-DIMM 0 204 pin Page 19 DDR3 1333/1600 MHZ DDR3L 1333MHZ 31mm X 24mm Channel A 4GB/2GB On Board Page 20~24 Page 3~9 Small pad footprint Small pad footprint DMI X4 FDI PECI HDMI Small pad footprint TMDS Page 28 LVDS 15.5'' FHD_1920 x 1080 Page 26 L sku optional Docking CRT CRT Converter ANX9832 Converter HM7 TDP 4W 989 Ball FCBGA 25 mm X 25 mm DDPD ANX9835 HDMI 2 USB 3.0 9 CRT Page 25 (USB2.0 x 14) (USB3.0 x 4) (PCIE x 8) (SATA x 6) HDD Headphone jack stereo USB HUB GENESYS 86%[ GL852G-MNGXX 5 HDA Audio Codec w/ HWEQ LPC SPI RJ45 +3VALW/ +5VALW USB 2.0 *3 USB to SATA GM20339F SATA x1 +1.8VRUN USB 3.0 *1 Page 40 3 4(1.5Gb/s) On LED DB USB 3.0 *1 2 SATA ODD H=9.5mm OUTPUTS Page 40 +5VALW Page 36 Int. Speaker LEDs -Power -Charge -Keyboard num/caps/scr lk -HDD/Optical Disc Drive -Wireless -Camera -MS/SD Transformer OUTPUTS OUTPUTS 0 Microphone jack stereo Switchs -Battery off switch -LID switch -Performance SPEED Switch(L SKU Optional) RJ45 1 System BIOS 64M bitX1 REALTEK ALC275 L sku optional Transformer Page 35 Int. DMIC Button -Power -ASSIST -Web -VAIO -ODD Eject On MS_SD DB LAN HUB(Realtek) RTL8365MB (SATA0) Page 10~18 OUTPUTS RJ45 BT+ Transformer Transformer Docking SATA Transformer Page 34 USB 2.0 0(3Gb/s) SW Page 34 REALTEK RTL8111F 3 Page 33 PCH (PPT) Panther Point-M LVDS GbE Controller 3 PCIE(Gen 2) LPC On MS_SD DB 2 TPM DB EC SMSC MEC1621 (BGA-225pin 0.8pitch) Debug Port SLB 9635 TT 1.2A L sku optional SMBus Page 31 1 R5G05000N753NF Page 29~30 SMBbus Charger 8 Page 63 MS Card REALTEK RTS5209-GR SD Card FingerPrint BQ24725RGRR Fingerprint DB OUTPUTS L sku optional +5VALW 10 SMBus/SPI +1.5VSUS On MS_SD DB WLAN/WiMAX Intel kilmer peak 2*2 WLAN Page 41 9 Page 65 Battery ID Memory Card controller Camera Page 37 PS/2&SMBUS 13 BluetoothPage 45 OUTPUTS 11 WWAN Page 42~44 On MS_SD DB SIM Card DB +5VALW L sku optional G-Sensor LIS331DLHTR Touch PAD Connector K/B W/backlight Connector Lid Switch2 Lid Switch1 No use LEDs Page 46 on Speed DB on LED DB FAN1 DPWM Page 32 Switchs Light Sensor BH1621FVC-TR 1 switch DB on Speed DB Charge IC TPS2540ARTER Page 39 Touch PAD (Clickpad) W/ Back light keyboard Thermal Sensor G709T1UF (H/W shutdown) For CPU Page 47 Thermal Sensor G709T1UF (H/W shutdown) For Ambient Page 47 Thermal sensor W83L771AWG (SKIN) Page 47 USB 2.0*1 Page 39 OUTPUTS +VHCORE Thermal Diode (DDR) Page 47 OUTPUTS +GFXCORE L sku optional 1--2 (EN ND) [Sony Confidential] SVS151 Series (9-890-888-XX) CHA APTER2. FRAME HARNESS DIA AGRAM 2-1.SVS151 Series (TOP) 2--1 [Sony Confidential] SVS151 Series (9-890-888-XX) 2-2. SVS151 Series (BOTTOM) 2--2 (EN ND) [Sony Confidential] SVS151 Series (9-890-888-XX) CHA APTER3. EXPLODED VIEWS AND PAR RTS LIST x The exploded views and parts list are compiled by blocks. The sections are different depending on the model. Please refer to list of contents shown. x Double-click on the paper clip mark in the Spec column to open the specifications list. x To open the parts list, Microsoft office Excel or Excel viewer is required. Section Page g Note……………………………………………………..….…….. 3-2 Screws JP S-1.Screws………………………………………………….…3-3 Palmrest P-1.Palmrest……………………………………………….… 3-4 34 US Main Board M-1.Main Board (For Ext-Gfx model)…….………………3-5 M-2.Main Board (For Int-Gfx model)…. ….………….. 3-6 Bottom B-1.Bottom……………………………………………………. 3 3-7 7 PA ODD D-1.ODD…………………………………………………….…3-8 HDD H-1.HDD……………………………………………………………. 3-9 LCD L-1.LCD ……………………………………………………… 3-10 Accessories EU A-1.Accessories……………………..……………………… 3-11 WWAN DIP Switch …………………………………. 3-12 Palmrest LCD AP ODD Main Board Bottom CN HDD S15119FJB S15119FJS S1511AGJB S1511AJ S15113FXB S15113FXS S15115FXB S15116FXB S15116FXS S15118FXB S15118FXS S151190X S1511GFYB S15115FBB S15115FDB S15115FLB S15117FDB S15117FLB S151190S S1511C5E S1511L3ES S1511M3EW S1511N3ES S1511Q9EB S1511R9ES S1511S3RB S1511S9ES S1511T9EB S1511T9ES S1511U9ES S1511V9EB S1511V9ES S1511V9RB S1511W9EB S1511X9EB S1511X9RB S15115FGB S15115FHB S15115FKB S15115FNB S15115FWB S15116GAB S15116GGB S15116GKB S15116GNB S15116GWB S151100C S15118ECB S15118ECW Palmrest Main Bottom ODD HDD LCD Accessories Spec Board P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P 1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 P-1 M-1 M-1 M-2 M-1/M-2 M-1 M-1 M-1 M-1 M-1 M 1 M-1 M-1 M-1/M-2 M-1 M-1 M-1 M-1 M-1 M-1 M-1/M-2 M-1/M-2 M-1 M-1 M-1 M-2 M2 M-2 M-1 M-2 M-1 M-1 M-1 M-1 M-1 M1 M-1 M-1 M-1 M-1 M-1 M-1 M-1 M-1 M-1 M-1 M-1 M-1 M-1 M-1 M-1/M-2 M-1 M-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B 1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 B-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D 1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 D-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H 1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 H-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L 1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 L-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A 1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 A-1 : CTO Model 3--1 [Sony Confidential] SVS151 Series (9-890-888-XX) Note xParts List is attached on the upper pp right g p portion of each EXPLODED VIEW. x Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. xThe parts marks “$” are the Reuse Parts. xThe parts marks with “&” indicates specific parts handling for Japan region. Disregard “&” marking for other than Japan region. x Color after description in [ ] shows color variation name of the main body. xThe model that is accompanied by asterisk () ( ) is the CTO model model. xDescription of [***MBx2], [***MB], [***GBx2], [***GB]indicates the following. ***MB/***GB: size of the part x2: installed quantity at original production xBe sure to use the parts marked with x/ ϭx together with the parts with the same number. xWhen replacing the HDD of RAID setting, please exchange to the same HDD that was installed installed. x If there is the Remarks column in the p parts list,, the features of applicable pp models are indicated in it for the parts that are different depending on each model. For the abbreviations used in the remarks column, please refer to the <table 1>. <table 1> Full-Name Bluetooth Felica Wireless WAN Wireless LAN 1 1seg T Tuner Finger Print Sensor Security Chip Flash Memory Camera Touch screen Panel Transfer Jet Basically, the parts marked “z” should be used for service. The parts marked “” in the parts list are substitution parts. If the part marked “z” is not available, you can order the parts marked “”, but it may not be stocked. The components identified by mark contain confidential information information. Strictly follow the instructions whenever the components repaired and/or replaced. Short-Name BT Felica WAN WLAN 1 1seg FP TPM F Mem Camera Touch screen T Jet T-Jet x If “No-” is described on the left side of the Short-Name, it means ‘not equipped’. Example: “No-BT” “No-Felica” etc. x When several descriptions are listed, each description is separated with “, (comma)” or “or”. “Comma” means plus. Example.1: The parts for the model equipped with BT and Felica and WLAN ÆBT, Felica, WLAN E Example.2: l 2 Th The parts t ffor the th model d l equipped i d with ith BT or Felica F li ÆBT or Felica F li x If the color is in the remarks column, it indicates the color of parts itself. 3--2 [Sony Confidential] SVS151 Series (9-890-888-XX) Parts List S-1. Screws x Double-click on the paper clip mark to open the parts list. x To open the parts list, Microsoft office Excel or Excel viewer is required. 3--3 [Sony Confidential] SVS151 Series (9-890-888-XX) Parts List P-1. Palmrest x Double-click on the paper clip mark to open the parts list. x To open the parts list, Microsoft office Excel or Excel viewer is required. 3--4 [Sony Confidential] SVS151 Series (9-890-888-XX) Parts List M-1. Main Board (For Ext-Gfx model) x Double-click on the paper clip mark to open the parts list. x To open the parts list, Microsoft office Excel or Excel viewer is required. 3--5 [Sony Confidential] SVS151 Series (9-890-888-XX) Parts List M-2. Main Board (For Int-Gfx model) x Double-click on the paper clip mark to open the parts list. x To open the parts list, Microsoft office Excel or Excel viewer is required. 3--6 [Sony Confidential] SVS151 Series (9-890-888-XX) Parts List B-1. Bottom x Double-click on the paper clip mark to open the parts list. x To open the parts list, Microsoft office Excel or Excel viewer is required. 3--7 [Sony Confidential] SVS151 Series (9-890-888-XX) Parts List D-1. ODD x Double-click on the paper clip mark to open the parts list. x To open the parts list, Microsoft office Excel or Excel viewer is required. 3--8 [Sony Confidential] SVS151 Series (9-890-888-XX) Parts List H-1. HDD x Double-click on the paper clip mark to open the parts list. x To open the parts list, Microsoft office Excel or Excel viewer is required. 3--9 [Sony Confidential] SVS151 Series (9-890-888-XX) Parts List L-1. LCD x Double-click on the paper clip mark to open the parts list. x To open the parts list, Microsoft office Excel or Excel viewer is required. SVS151 Series have two kinds of WLAN ANTENNA (Ref.No.1006 and 1007). When replacing either either, The Main and Aux Antenna must use same vendor's vendor s parts parts. Part’s vendor can be distinguished by color of red boxed area. The black ones are ACON’s, the green ones are INPAQ’s. ACON INPAQ A-1883-344-A ANTENNA MAIN A-1883-343-A ANTENNA AUX A-1883-346-A ANTENNA MAIN A-1883-345-A ANTENNA AUX SVS151 Series have three kinds of Hinge (Ref.No.1012 and 1013). When replacing either, The Left and Right Hinge must use same vendor's parts. Vendor name is inscribed on red circled area. SZS Jarlly LH 4-429-358-01 Left Hinge 3-10 4-429-359-01 Right Hinge 4-429-358-11 Left Hinge 4-429-359-11 Right Hinge 4-429-358-21 Left Hinge 4-429-359-21 Right Hinge [Sony Confidential] SVS151 Series (9-890-888-XX) Parts List A-1. Accessories 2005 Power Cord x Double-click on the paper clip mark to open the parts list. x To open the parts list, Microsoft office Excel or Excel viewer is required. 2005 Power Cord 2006 AC Adapter (for Stick Type Adapter) 2007 Battery Pack 2006 AC Adapter (Stick Type) 2008 Extended Battery 2009 Battery Adapter 2011 Carrying Pouch 2012 Cable Clip 3-11 [Sony Confidential] SVS151 Series (9-890-888-XX) WWAN DIP Switch WWAN DIP Switch Location There are four DIP Switches. he first three ones is used for WWAN Card, please set them as below. 1. Th SVS1511AJ (JP) LTE, with GPS S1511X9RB (EU) LTE, without GPS S1511C5E/S1511T9EB/S1511T9ES/S1511W9EB/S1511X9EB (EU) GOBI3K, without GPS For all the SKUs without WWAN Card, 2.The fourth f one is used for Intel Anti-Theft setting. When replace Main Board, not to change the normal setting of the replaced one For all EU SKUs. With Anti-Theft A ti Th ft For all JP, US, PA, AP, CN SKUs. Without Anti Anti-Theft Theft 3-1 12 (EN ND) [Sony Confidential] SVS151 Series (9-890-888-XX) CHA APTER4. O OTHERS 4-1.Note for WWAN Board Replacement When replacing the WWAN Board (Ref.305 A-1850-708-B/A-1850-708-C/A-1890-111-B/A-1890-112-B), change the barcode label on the bottom. 1. Peel off the barcode label which is attached to the bottom. (Refer to the figure below.) Ref.No.305 A-1850-708-B/A-1850-708-C GOBI3000 US-EU-AP M-CARD(F)(S) [EVDO_HSPA/Huawei/MC_G3] A-1890-111-B LTE JP WWAN MINI CARD(F)(S) [JP/docomo/ LTE_HSPA/Band 1,6/GPS/Band1/MC/Sierra] A-1890-112-B LTE EU WWAN MINI CARD(F)(S) [EU/LTE_HSPA/900, 1800/Band 1,8/Band7, 20/MC/Sierra] WWAN:XXXXXXXXXXXX 2. Attach the barcode label which is included with the WWAN Board to o the position where you peeled off the label in the step 1. 4--1 [Sony Confidential] SVS151 Series (9-890-888-XX) 4-2.Note for WIMAX Board Replacement When replacing the WIMAX Board (Ref.304 A-1891-489-A), change the e barcode label on the bottom. 1. Peel off the barcode label which is attached to the bottom. (Refer to the figure below.) Re ef.No.304 A--1891-489-A CARD, WLAN/WIMAX COMBO(B)(S) [bgn/Intel/KsP_1x2/WiMAX] WIMAX:XXXXXXXXXXXX 2 Attach the barcode label which is included with the WIMAX Board tto the position where you peeled off the label in the step 1. 2. 1 4--2 [Sony Confidential] SVS151 Series (9-890-888-XX) 4-3 Holding Method of Main Board 1. When operating with both hands, gently hold the middle of Main board edge as show w. 2. When operating with one-hand, gently hold the middle of Main board edge and keep vertical. (Level) (Vertical) 4--3 (EN ND) [Sony Confidential] SVS151 Series (9-890-888-XX) SVS151 Series (JP/US/PA/EU/AP/CN) This manual and the constituent data may not be replicated, copied nor reprinted in whole or in part without prior written authorization of Sony Corporation 9-890-888-04 Sony Corporation 23 English 2012KF00-1 © 2012 Sony Corporation Published by Sony Corporation VAIO & Mobile Business Group CS & Quality Div. VAIO Global CS Dept. Revision History Suffix Ver. Date Contents QM No. -01 Ver.1 2012.05.21 First Edition -02 Ver.2 2012.07.09 [ADD][CHG][DEL L][COR] Page3-3, Page3-4, Page3-5, Page3-6, Page3-7, Page3 3-9, Page3-10, Page3-11, Page4-2 -03 Ver.3 2012.09.03 [ADD][COR][CHG G] Page3-4, Page3-4 Page3-5, Page3-5 Page3-8, Page3--10, Page3-11 -04 Ver.4 2012.11.01 [ADD][COR][CHG G][DEL] Page3-4, Page3-5, Page3-6, Page3-7, Page3-9, Page3--11, Page4-1 Page3-6 Page3-6, Page3-7 Page3-7, <Remarks> 518 [Sony Confidential] SVS151 Series (9-890-888-XX)
