Download Sylvania DVR90DE DVD Recorder User Manual
Transcript
E6500UD.QX 03.12.8 19:06 Page 1 DVD Recorder DVR90DE Please read before using this equipment. If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1-800-968-3429 or visit our web site at http://www.funai-corp.com E6500UD.QX 03.12.8 19:26 Page 2 Table of contents IMPORTANT SAFEGUARDS . . . . . . . . 3 PRECAUTIONS . . . . . . . . . . . . . . . . . . .4 LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . .4 About Copyright . . . . . . . . . . . . . . . . . . . . . . . . .4 Before you start . . . . . . . . . . . . . . . . . . .5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Easy understanding for DVD recording . . . . . . .6 Guide to Displays . . . . . . . . . . . . . . . . . . . . . . . . .8 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Installing batteries in the remote control . . . . .10 Using a remote control . . . . . . . . . . . . . . . . . . .11 Information on this owner's manual . . . . . . . . .11 Symbol in this owner's manual . . . . . . . . . . . . .11 Location of controls . . . . . . . . . . . . . . . . . . . . . .12 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Front display . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Connections . . . . . . . . . . . . . . . . . . . . .16 Connection to antenna . . . . . . . . . . . . . . . . . . .16 When connecting to a cable box with only a few scrambled channels . . . . . . . . . . . . .16 When connecting to a cable box with many scrambled channels . . . . . . . . . . . . . . . . .17 Connection to other devices . . . . . . . . . . . . . . .18 Connection to TV with a standard A/V cable . . . . .18 Connection to TV with a S-Video cable . . . . . . . . . .19 Connection to TV with a component video cable . .19 Connection to TV and VCR . . . . . . . . . . . . . . . . . .20 Connection to AV amplifier with a coaxial digital audio cable . . . . . . . . . . . . . . .21 Getting started . . . . . . . . . . . . . . . . . . .22 Switching on . . . . . . . . . . . . . . . . . . . . Initial setting: Channel setting . . . . . . Getting channels automatically . . . . . . . . Adding/deleting channels . . . . . . . . . . . . Initial setting: Clock . . . . . . . . . . . . . . Setting the clock . . . . . . . . . . . . . . . . . . Adjusting the clock automatically . . . . . . Setting the daylight savings time . . . . . . . Initial setting: Selecting the TV aspect Initial setting: RF converter output (Watching the TV programs received by the tuner of the DVD recorder) . . . . . . . . . .22 . . . . . . . .22 . . . . . . . . .23 . . . . . . . . .24 . . . . . . . .25 . . . . . . . . .25 . . . . . . . . .27 . . . . . . . . .28 ratio . . .29 . . . . . . . .30 Recording . . . . . . . . . . . . . . . . . . . . . . .32 Information on DVD recording . . . . . . Recording speed . . . . . . . . . . . . . . . . . . Restrictions on recording . . . . . . . . . . Settings for recording to a blank disc . Formatting a disc . . . . . . . . . . . . . . . . . Recording from the TV . . . . . . . . . . . . One-touch timer recording . . . . . . . . . Checking the recording picture quality Finalizing the discs . . . . . . . . . . . . . . . . 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 .32 .32 .33 .34 .36 .37 .37 .38 Timer recording . . . . . . . . . . . . . . . . . . . . Checking the imformation on the timer programming during the timer recording The priority of overlapped setings . . . . . Setting a disc to protect . . . . . . . . . . . . . Recording from an external component . . . . . .41 ... .... .... .... .43 .44 .45 .46 Playing discs . . . . . . . . . . . . . . . . . . . . .48 Information on DVD play . . . . . . . . . . . . . . . . .48 Basic Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Playing discs using the disc menu . . . . . . . . . . .51 Playing discs using the title menu . . . . . . . . . . .52 Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Step by step playback . . . . . . . . . . . . . . . . . . . .53 Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Title/Chapter search . . . . . . . . . . . . . . . . . . . . .56 Track search . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Time search . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Fast forward / Fast reverse search . . . . . . . . . .58 Slow forward / Slow reverse play . . . . . . . . . . .58 Skipping TV commercials during play . . . . . . . .59 Selecting the format of audio and video . . . . . .59 Switching audio soundtrack . . . . . . . . . . . . . . . . . . .59 Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .61 Switching camera angles . . . . . . . . . . . . . . . . . . . . . .62 Reducing block noise . . . . . . . . . . . . . . . . . . . . . . . .62 Editing . . . . . . . . . . . . . . . . . . . . . . . . .64 Information on disc editing . . . . . . . . . . . . . . . .64 Editing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Deleting titles . . . . . . . . . . . . . . . . . . . . .65, 69, 77, 86 Putting names on titles . . . . . . . . . . . . . .66, 71, 80, 87 Setting or clearing chapter markers . . . . . . .68, 73, 81 Deleting parts of titles . . . . . . . . . . . . . . . . . . . .70, 78 Setting pictures for thumbnails . . . . . . . . . . . . . .74, 83 Setting titles to protect . . . . . . . . . . . . . . . . . . . . . .75 Releasing titles from protecting . . . . . . . . . . . . . . . .76 Adding titles to a playlist . . . . . . . . . . . . . . . . . . . . .84 Deleting a playlist . . . . . . . . . . . . . . . . . . . . . . . . . . .85 Using SETUP menu . . . . . . . . . . . . . . .88 Other settings: Parental Lock . . . . . . . . . . . . . .89 Setting a parental lock level . . . . . . . . . . . . . . . . . . .89 Other settings: Language settings . . . . . . . . . . .92 Choosing the menu language . . . . . . . . . . . . . . . . . .92 Choosing the audio language . . . . . . . . . . . . . . . . . .93 Choosing the subtitle language . . . . . . . . . . . . . . . . .94 Other settings: Audio settings . . . . . . . . . . . . . .96 Setting digital audio output . . . . . . . . . . . . . . . . . . .96 Compressing the range of sound volume . . . . . . . . .98 Outputting the sound during play in fast forward . .99 Other settings: Display . . . . . . . . . . . . . . . . . .100 Others . . . . . . . . . . . . . . . . . . . . . . . .102 Troubleshooting . . . . . . . . . . . . Quick Guide to DVD disc types Language code . . . . . . . . . . . . . Notes about discs . . . . . . . . . . . Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102 .104 .105 .106 .107 E6500UD.QX 03.12.8 19:06 Page 3 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFEGUARDS 1) Read Instructions - All the safety and operating instructions should be read before the product is operated. 2) Retain Instructions - The safety and operating instructions should be retained for future reference. 3) Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4) Follow Instructions - All operating and use instructions should be followed. 5) Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6) Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7) Water and Moisture - Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. 8) Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. 9) A product and cart combination should be PORTABLE CART WARNING (Symbol provided by RETAC) moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 10)Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and S3125A these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 11)Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 12)Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 13)Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 14)Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 15)Power lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16)Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 17)Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 18)Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19)Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service. 20)Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 21)Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 22)Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 3 E6500UD.QX 03.12.8 19:06 Page 4 PRECAUTIONS LASER SAFETY This player employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, ON THE DECK MECHANISM. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. About Copyright Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 4 E6500UD.QX 03.12.8 19:06 Page 5 Before you start Features Recording This DVD recorder is compatible for you with both DVD-RW, which is rewritable repeately, and DVDR, which is available for recording once. You can choose either one for your convenience. Up to 8 program recording: You can program the unit to record up to 8 programs, up to a year in advance. Daily or weekly program recordings are also available. One-touch timer recording: Easily you can set a recording time as you prefer. Every time the REC button pressed during recording, the recording time will be increased by 30 minutes up to 4 hours. The recording automatically stops when the recording time you set is reached. REC MONITER: Just one press of REC MONITOR button makes you available for confirming of the recording picture quality with the current recording mode before you attempt to record the program. You can change the recording mode to another here. Automatic Chapter marker setting: Chapter markers will be put on recordings as you set in SETUP menu before attempting to record. It greatly helps you to edit the recordings as you purpose. Automatic Title menu making: The DVD recorder makes title menus automatically as the recordings are made. Automatic PLAYLIST making (VR mode): The Playlist will be prepared from the Original list, so that you can edit titles in Playlist as you prefer. The original list is kept as it is. Play Theater surround sound in your home: When connenting the DVD recorder to an amplifer or a decorder which is compatibale with Dolby Digital, you are allowed to experience the theater surround sound from discs with those sorround sound systems. Quick search for what you want to watch: You can easily find the part you want to watch using serch function. Search for a point on a disc by title, chapter, or time. Start to play from Original Playlist: Title playing is available from either an original list or Playlist. Editing Setting/Clearing chapter markers: You can easily add chapter markers anywhere in your recordings for easy editing. (VR mode) Making your own Playlist: With the original remains as it is, you can edit titles on Playlist variously as you prefer. Putting names on titles (Page XX) Setting pictures for thumbnails (Page XX) Setting/clearing chapter markers (Page XX) Deleting parts of titles (Page XX) etc Protecting titles: To avoid erasing titles, the protect function is useful when it is ON in the original list. Compatibility Available for playing discs recorded with Video mode on a regular DVD player (Video mode): Discs recorded with the Video mode can be played on regular DVD players, including computer DVD drives compatible with DVD-Video playback*. * DVD-Video Format (Video mode) is a new format for recording on DVD-R/RW discs that was approved by the DVD Forum in 2000. Adoption of this format is optional for manufactures of DVD playback devices, and there are DVD-Video players, DVD-ROM drives or other DVD playback devices that do not play DVD-R/RW discs recorded in the DVD-Video Format. 5 Before you start Not only playing the discs of DVD or CD, but this DVD recorder features for you recording to DVD discs and editing them after that. Followings are what you can do with this DVD recorder. E6500UD.QX 03.12.8 19:06 Page 6 Before you start Easy understanding for DVD recording You may have some simple questions about DVD recording. The followings will help you to understand easily how to prepare for DVD recording and to attempt to record. To DVD discs in steps. Step 1: Choose a disc type There are several types of DVD disc recordable for the intension of use. Choose an applicable type by following “Quick guide to DVD disc type”. This DVD recorder can record on the following type of discs. For example, when you want to record repeatedly on the same disc, or when you want to edit the disc after recording, select either the rewritable DVD-RW type disc. When you want to save recordings without any alteration, a non-rewritable DVD-R can be your choice. Step 2: Format the disc be ready for recording Insert the disc in the recorder. Then, format the disc from SETUP menu. Video format (Video mode) or Video recording format (VR mode) will be available depending on the disc type inserted. This is necessary to prepare the disc for recording. When using a DVD-RW This type of disc can be formatted in either (Video mode or VR mode). Video mode discs can be played back on a variety of other DVD equipment. VR mode discs are allowed for more varied editing. When using a DVD-R These discs will be formatted in Video mode. This type of disc can be played back on a variety of other DVD equipment. Note: • You cannot mix two formats in one DVD-RW. • You can change a DVD-RW’s format to the other format. However, the disc’s contents will be lost when reformatting. • Not all discs can be played on other DVD equipment. Now you are ready for recording. 6 E6500UD.QX 03.12.8 19:06 Page 7 Before you start Step 5: Edit the recorded disc Record a program by pressing REC button. When using the timer, one-touch timer recording, manual timer recording are available. Refer to each page describing the operation for details. You will find editing discs very easy, and the DVD recorder offers convenient edit functions, which are possible only with DVDs. Before you start Step 3: Record to DVD discs You can edit the followings from a title list. Step 4: Play the recorded contents • Putting names on titles • Setting pictures for thumbnails (VR mode) • Setting/clearing chapter markers • Deleting parts of titles (VR mode) Original and Playlist (VR mode) You can select the title you want to play from a displayed menu, and immediately start to play. Recorded contents are very accessible on a disc, the procedure is simple really as you choose a title on a chapter from the menu screen. What is titles and chapters? The contents of DVD disc are generally devided into some titles. Titles may be further subdivided into chapters. Start Rec. Title 1 Stop/Start Stop Rec. Title 2 You can edit the recordings in playlist without changing the original recordings. Any playlist does not take up much disc space. What “Original” or “Playlist” refers for? Throughut this manual, you will find Original and Playlist to refer to the actual content and the edited version. • Original content refers to what’s actually recorded on the disc. • Playlist content refers to the edited version of the disc---how the Original content is to be played. Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2 7 E6500UD.QX 03.12.8 19:06 Page 8 Before you start Guide to Displays The DVD recorder uses the following types of display for most opertions. SETUP/DISC/CD menu, Title list, and DISPLAY, which allows you to change the playing status of disc during play. DISPLAY also gives you some disc information for checking the status of the disc. SETUP/DISC/CD menu Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by K / L / { / B. Press ENTER button to display each menu. These provides entries to all main functions of the DVD recorder. Setup Menu Setup 1 2 3 Disc CD Playback Mode Edit Random Playback Format Program Playback Finalize Disc Protect OFF 4 Setup Menu Setup Menu 5 6 ON 1 2 3 4 1 2 Playback Setting 1. Playback: To set up the DVD recorder to play discs as you prefer. 2. Recording: To set up the DVD recorder to record to discs as you prefer. 3. Display: To set up the OSD screen of the DVD recorder as you prefer. 4. Select Video: To choose a line input to record to DVD discs from other video equipment. 5. Clock: To set up the clock of the DVD recorder as you need. 6. Channel: To make the channel setting of the DVD recorder as you prefer. 8 1. Edit: Turns on a title list, (When a disc with VR mode is inserted, 'Original' or 'PlayList' is available.), which shows the recorded titles on the disc. 2. Format: Allows you to erase all of the recorded content on the disc. The disc will be completely blank. 3. Finalize: Allows you to finalize a disc recorded titles. 4. Disc Protect: Allows you to protect a titles on an original list from accidental editing. 1. Random Playback: To set the random play programming. 2. Program Playback: To set the program playing. E6500UD.QX 03.12.8 19:06 Page 9 Before you start Title list allows you to check the titles recorded on the disc easily. You can choose a title to play from this screen and can easily edit the titles as you prefer. Disc > Original 1 1 2 3 1/JAN AM00:00 1/JAN AM00:00 1/JAN AM00:00 4 5 1/JAN AM00:00 1 1/JAN AM00:00 2 Disc > Original 1 1/JAN AM 1:00 CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect On XP 0:01:25 3 6 5 4 1. Titles recorded on the disc. Each can be selected to edit by pressing ENTER button with the cursor on the title 2. Protect icon, which appears when the title has been protected. 3. The selected title thumbnails from the title list. 4. The menus in here for editing titles as you prefer. The available menus depends on the disc type and the format type. 5. The details of the title, which can be changed to the title name you will edit. 6. Time status bar of the title, which can be used to put chapter marks as you prefer. DISPLAY DISPLAY appears by pressing DISPLAY button, then gives you the information on the disc playing. And some settings are available while disc play. 3 1 1 1 00:00:00 DVD-RW Video Format SP 1:25 4 2 1. Indicates a disc type and a format mode. 2. Indicates a recording mode and possible recoding time. 3. Indicates a title number, chapter number, and the time lapse of disc play. 4. Each icon means: : Search : Audio : Subtitle : Angle : Repeat : Marker : Noise Reduction : Zoom 9 Before you start Edit E6500UD.QX 03.12.8 19:06 Page 10 Before you start Accessories You will find the following accessories when unpacking the carton box. • Remote control with two AA batteries (NB001UD) Installing batteries in the remote control You will need to install batteries in the remote control to be ready to use. 1 Unsnap the battery cover from the back of the remote control. • RF cable (WPZ0901TM002) 2 Install two AA batteries making sure the polarity (+ / –) direction is correct. • Audio/Video cables • Owner’s Manual (0VMN03892) Owner's Manual Note: When replacing batteries, make sure to replace them in pairs. 3 Snap the battery cover back. 10 E6500UD.QX 03.12.8 19:06 Page 11 Before you start Information on this owner's manual This owner's manual is designed mainly for the operation of the remote control: Please read this owner's manual carefully to learn how to use the features explained through the manual. Symbol in this owner's manual Many functions of this DVD recorder are depending on the disc type or the recording mode. To specify for what disc type or recording mode each function is, we put the following symbols at the beginning of each item to operate. Symbol Description Using a remote control DVD-V Available to DVD Video discs Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the remote sensor on the DVD recorder. • Use within the operating range and angle as shown. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the remote sensor of the DVD recorder. • Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to the DVD recorder. • Replace the batteries when you notice a fall off in the operating range of the remote control. • When the batteries run down or you change the batteries, the remote control mode and TV preset code are automatically reset. See page XX to reset them. DVD-RW Video Avaialble to DVD-RW with Video mode DVD-RW VR Avaialble to DVD-RW with VR mode DVD-R Available to DVD-R discs CD Available to CD discs Within about 7m REC REC MODE 60˚ POW ER DISPL AY CH SPEE PQRS 4 CLEA 7 R GHI 1 .@/: 2 DEF 5 MNO 8 k h REV CM TIME PRO G. R ABC JKL TUV SPAC E 0 E 3 WXY 6 Z SK H 9 SKIP A D PAUS PLA B Y IP P E LOS N/C OPE REC REC C OR RENIT MO P U/ MEN AL GIN STOC G TOP ORI g K PLA R NU LIS ME Y ENTE D FW T Remote control 11 Before you start Note: Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: • Do not mix new and old batteries together. • Do not use different kinds of battery together, although they may look similer, different batteries may have different voltages. • Make sure that the plus and minus ends of each battery match the indications in the battery compartment. • Remove batteries from equipment that is not going to be used for a month or more. • When disposing of used batteries, please comply with governmental regulations or environmental public instruction's rules that apply in your country or area. • Do not recharge, short-circuit, heat, burn or disassemble batteries. E6500UD.QX 03.12.8 19:06 Page 12 Before you start Location of controls Front Panel 1 2 345 6 7 8 13 14 15 11 10 12 1. POWER button Press to turn the DVD recorder on and off. 6. CH L / K button Press to change the channel up and down. 2. STOP C button Press to stop play or recording. 7. A (OPEN/CLOSE) button Press to open or close the disc tray. 3. REW H button Press to skip to the previous chapter or track. Press and hold for 1.5 seconds to fast reverse. 8. Disc tray Place a disc when open. 4. PLAY B button Press to start or resume play. 5. FF G button Press to skip to the next chapter or track. Press and hold for 1.5 seconds to fast forward. 12 9 9. Display 10. REC SPEED button Press to switch the recording speed. 11. REC button Press to start recording. 12. Remote control sensor Receive signals from your remote control so that you can control the DVD recorder from a distance. 13. S-VIDEO INPUT(LINE2) Use to connect the S-Video output of external equipment with an S-Video cable. 14. VIDEO INPUT(LINE2) Use to connect external equipment with a standard video cable. 15. AUDIO INPUT(LINE2) Use to connect external equipment with standard audio cables. E6500UD.QX 03.12.8 19:06 Page 13 Before you start Before you start Rear Panel 1 2 11 1. AC IN – Power inlet 2. AUDIO OUTPUT 1, 2 Use to connect a TV monitor, AV receiver or other equipment with standard audio cables. 3. VIDEO OUTPUT Use to connect a TV monitor, AV receiver or other equipment with a standard video cable. 4. S-VIDEO OUTPUT Use to connect the S-Video input of a TV monitor, AV receiver or other equipment with an S-Video cable. 3 4 10 9 5. COMPONENT VIDEO OUTPUT Use to connect a TV monitor with component video inputs with component video cables. 6. TV ANTENNA IN Use to connect an antenna. 7. TV ANTENNA OUT Use to connect an antenna cable to pass the signal from the TV ANTENNA IN to your TV monitor. 8. S-VIDEO INPUT(LINE1) Use to connect the S-Video output of external equipment with an S-Video cable. 5 8 6 7 9. VIDEO INPUT(LINE1) Use to connect external equipment with a standard video cable. 10. AUDIO INPUT(LINE1) Use to connect external equipment with standard audio cables. 11. COAXIAL DIGITAL AUDIO OUTPUT Use to connect an AV receiver, Dolby Digital decorder or other equipment with a coaxial digital input with a digital coaxial cable. 13 E6500UD.QX 03.12.8 19:06 Page 14 Before you start Remote Control POWER 1 TIMER PROG. .@/: 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 SPACE 0 CM SKIP A 2 3 CH REC MONITOR 4 REC SPEED CLEAR 6 8 5 REC 7 PAUSE H 19 G 20 B REV FWD h g 21 STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL 12 14 18 PLAY 11 13 16 17 SKIP k 9 10 OPEN/CLOSE DISPLAY 22 K ENTER REPEAT { B 1. POWER button Press to turn the DVD recorder on and off. 2. DISPLAY button Press to display or change the on-screen display. 3. CH K / L button Press to change the channel up and down. 4. REC MONITOR button Press to check the video to be recorded before attempting. 5. REC SPEED button Press to switch the recording speed. 6. CLEAR button Press to clear the password once entered or to cancel the programming for CD or to clear chapter search function. 14 23 RETURN ZOOM 15 24 L 25 7. REC button Press to start recording. 8. PAUSE F button Press to pause play or recording. 9. PLAY B button Press to start or resume play. 10. REV E button During play, press to play fast reverse. Or during play is paused, press to play slow reverse. 11. STOP C button Press to stop play or recording. 12. SETUP button Press to display the setup menu. 13. TOPMENU button Press to display the top menu. 14. REPEAT button Press to repeat play. 15. ZOOM button Press to enlarge the picture on the screen. 16. OPEN/CLOSE A button Press to open or close the disc tray. 17. TIMER PROG. button Press to display the timer program setting menu. 18. Number buttons Press to select a title/chapter/track on display or a TV channel. Or press to enter values for the settings in the SETUP menu. 19. CM SKIP button Press to skip the 30 sec. 20. SKIP H button During play, press to skip to the previous chapter or track. Or during play is paused, press to play reverse step by step. SKIP G button During play, press to skip to the next chapter or track. Or during play is paused, press to play forward step by step. 21. FWD D button During playback, press to play fast forward. Or during play is paused, press to play slow forward. 22. MENU ORG/PL button Press to display the Play List. 23. ENTER button Press to confirm or select menu items. 24. K / L / B / { buttons Press to move the cursor around the screen. 25. RETURN button Press to return to the previously displayed menu screen. E6500UD.QX 03.12.8 19:06 Page 15 Before you start Front display Before you start 4 2 1 3 6 5 1. Current status of the DVD recorder 2. Disc type : Appears when CD is inserted in the disc tray. : Appears when a disc play is paused. : Appears when indicating a title/track number. : Appears when DVD is inserted in the disc tray. : Appears during playing a disc. : Appears when DVD-R is inserted in the disc tray. : Appears when the timer programming has been made and is proceeding. : Appears when DVDRW is inserted in the disc tray. : Appears during recording is in proceed. :Appears during repeat play. 4. Title/Track and Chapter mark 3. Recording speed Indicates the recording speed of the disc. : Appears when indicating a chapter number. 5. Displays the following • Playing time / remaining time • Current title / chapter / track number • Recording time • Clock • Channel number 6. : Appears in the afternoon with the clock displaying. Display message 1 2 4 5 1. Appears when the DVD recorder is powered on. 2. Appears when the DVD recorder is powered off. 3. Appears when the disc tray is opening or open. 3 6 4. Appears when the disc tray is closing or close. 5. Appears when a disc is loading or loaded in the disc tray. 6. Appears when recording data is writing on to the disc. 15 E6500UD.QX 03.12.8 19:06 Page 16 Connections Use a standard antenna cable to connect the wall jack to the TV ANTENNA IN jack on the DVD recorder. Connection to antenna Note: Antenna and antenna cable are not included. 1 Antenna TV VHF/UHF IN Use a standard antenna cable to connect the wall jack to the TV ANTENNA IN jack on the DVD recorder. 1 antenna cable ANT. IN DVD Recorder ANT. OUT 2 RF cable (supplied) 2 Use a standard antenna cable to connect the TV ANTENNA OUT jack on the DVD recorder to the antenna input jack on the TV. : signal flow When connecting to a cable box with only a few scrambled channels If you are using a cable box or satellite receiver with only a few scrambled channels, follow the setup on this page. If many or all the channels are scrambled, we recommend using the setup on the following page. Note: Antenna and antenna cable are not included. A piece of RF cable is included. TV To Antenna VHF/UHF IN 1 1 RF cable VHF/UHF OUT : signal flow 16 ANT. IN DVD Recorder Cable box antenna cable 1 RF cable (supplied) VHF/UHF IN ANT. OUT With this setup: • You can record any non-scrambled channel by selecting the channel on the DVD recorder. • You cannot record scrambled channels that require a cable box. 1 Use a standard antenna cable as shown. Note to the Cable TV System Installer : This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible. E6500UD.QX 03.12.8 19:06 Page 17 Connections When connecting to a cable box with many scrambled channels If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup. Note: Antenna and antenna cable are not included. A piece of RF cable is included. To Antenna TV 1 antenna cable 1 RF cable 1 Use a standard antenna cable as shown. VHF/UHF IN Cable box VHF/UHF OUT DVD Recorder 1 RF cable (supplied) ANT. IN ANT. OUT : signal flow 17 Connections VHF/UHF IN With this setup: • You can record any unscrambled channel by selecting the channel on the cable box. Be sure that the cable box is turned on. • You cannot record one channel while watching another channel. E6500UD.QX 03.12.8 19:06 Page 18 Connections Connection to other devices There will be various ways of connecting the DVD recorder to other devices. Make your connection according to your choice of devices, screen format, and sound format. You will find some sample connections in the following pages. Note: • All jack on the DVD recorder will not need to connected. • When you change the connections, all devices should be turned off. • Refer to each owner's manual for further information on other devices. Connection to TV with a standard A/V cable Note: Antenna and antenna cable are not included. A/V IN 1 VHF/UHF IN 1 : signal flow A/V cable (supplied) antenna cable AUDIO/VIDEO OUTPUT ANT. IN RF cable (supplied) ANT. OUT DVD Recorder 18 Use a standard A/V cable to connect the AUDIO OUTPUT(L/R) and VIDEO OUTPUT jacks on the DVD recorder to the audio and video input jacks on the TV. Antenna TV 1 E6500UD.QX 03.12.8 19:06 Page 19 Connections 1 Connection to TV with a S-Video cable Note: S-video cable is not included. TV Use a S-Video cable to connect the S-VIDEO OUTPUT jack on the DVD recorder to the S-Video input jack on the TV. S-VIDEO INPUT 2 1 S-Video cable Use a standard audio cable to connect the AUDIO OUTPUT(L/R) on the DVD recorder to the audio input jacks on the TV. A/V cable 2 (supplied) AUDIO/VIDEO OUTPUT S-VIDEO OUTPUT DVD Recorder : signal flow Connection to TV with a component video cable Note: Component video cable is not included. TV 1 Use a component video cable to connect the COMPONENT VIDEO OUTPUT jacks on the DVD recorder to the component input jacks on the TV. COMPONENT VIDEO IN 2 A/V IN 1 1 component video cable A/V 2 cable (supplied) AUDIO/VIDEO OUTPUT Use a standard audio cable to connect the AUDIO OUTPUT(L/R) on the DVD recorder to the audio input jacks on the TV. COMPONENT VIDEO OUT DVD Recorder : signal flow 19 Connections A/V IN 1 E6500UD.QX 03.12.8 19:06 Page 20 Connections 1 Connection to TV and VCR Note: Antenna and antenna cable are not included. A piece of Audio/Video cable and RF cable are included. Use standard antenna cables to connect the DVD recorder and the VCR from the wall jack socket as shown. Antenna TV A/V IN 1 VHF/UHF IN 2 Use a standard A/V cable to connect the AUDIO OUTPUT and VIDEO OUTPUT jacks on the DVD recorder to the audio and video input jacks on the TV. A/V IN 2 1 RF cable A/V 3 cable VCR VHF/UHF OUT 2 A/V cable (supplied) A/V OUT antenna cable VHF/UHF IN AUDIO/VIDEO OUTPUT DVD Recorder 1 RF cable (supplied) : signal flow 20 1 ANT. IN ANT. OUT 3 Use a standard A/V cable to connect the audio and video output jacks on the VCR to the audio and video input jacks on the TV. E6500UD.QX 03.12.8 19:06 Page 21 Connections Connection to AV amplifier with a coaxial digital audio cable Note: Antenna, antenna cable, and coaxial digital audio cable are not included. A piece of Audio/Video cable is included. Antenna TV VHF/UHF IN Use a coaxial digital audio cable to connect the COAXIAL DIGITAL AUDIO OUTPUT jack on the DVD recorder to the coaxial digital audio input jack on the AV ampifier. 2 Use a standard AV cable to connect the AUDIO OUTPUT and VIDEO OUTPUT jacks on the DVD recorder to the audio and video input jacks on the AV amplifier. 3 VIDEO IN Connect the AV receiver’s video output to a video input on your TV. A/V 3 cable AV amplifier VIDEO OUT A/V IN 1 antenna cable DIGITAL IN COAXIAL 2 Front (L) Center Front (R) Rear (L) Subwoofer Rear (R) A/V cable (supplied) AUDIO /VIDEO OUTPUT DVD Recorder 1 coaxial digital audio cable DIGITAL OUT COAXIAL ANT. IN ANT. OUT RF cable (supplied) : signal flow 21 Connections To enjoy multichannel surround sound you need to connect this recorder to an AV amplifier/receiver using the coaxial output. In addition to a digital connection, we recommend also connecting using the stereo analog connection. You'll probably also want to connect a video output to your AV amplifier/receiver. Use the standard (composite) video output (as shown here), or the S-Video or component video connections. Refer to your AV amplifier/receiver owner's manual for further information. 1 E6500UD.QX 03.12.8 19:06 Page 22 Getting started Switching on POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH REC MONITOR 1 Press POWER button on the remote control or the front panel of the DVD recorder. 9 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K { B RETURN ZOOM L 22 2 ENTER REPEAT Turn the TV on and be sure to select the input to which the DVD recorder is connected. Initial setting: Channel setting All channel is stored in the DVD recorder when purchased. We recommend that you get available channels in your area stored using “Auto Preset” in Setup menu. If there are any channels you will not need, you will be able to remove the channels using “Manual Preset” in the menu. E6500UD.QX 03.12.8 19:06 Page 23 Getting started POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 CM SKIP REC MODE CLEAR Getting channels automatically 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: 4 Select “Auto Preset” using K / L buttons, then press ENTER button. The DVD recorder will start getting channels available in your area. 0 REC PAUSE CH 18 SKIP k H G Auto Presetting Now B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL Setup Menu ENTER REPEAT { B RETURN ZOOM 2 L Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. Setup Note: • If the auto presetting is cancelled during presetting, some channels not yet preset may not be received. • The selection will depend on how you receive the TV channels. 5 Playback Setting Press SETUP button to exit SETUP menu. 3 Select “Channel” using K / L / { / B buttons, then press ENTER button. Channel Preset menu will appear. Setup > Channel Preset Auto Preset Manual Preset TV Audio Select Stereo 23 Getting started To cancel the auto presetting during scanning: Press RETURN button or SETUP button to cancel. K E6500UD.QX 03.12.8 19:06 Page 24 Getting started POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR Adding/deleting channels 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: 4 Select “Manual Preset” using K / L buttons, then press ENTER button. Manual Preset menu will appear. Setup > Channel Preset > Manual Preset CH2 Add Delete 0 REC PAUSE SKIP k H G B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL 5 Setup Menu K ENTER REPEAT { B RETURN ZOOM 2 L Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. Select the channel number to add or delete. Press { button to move to a lower channel number. Press B button to move to a higher channel number. Setup > Channel Preset > Manual Preset Setup CH18 Add Delete Playback Setting 6 3 Select “Channel” using K / L / { / B buttons, then press ENTER button. Channel Preset menu will appear. Setup > Channel Preset Auto Preset Manual Preset TV Audio Select Select “Add” or “Delete” using K / L buttons, then press ENTER button. The channel number will be added or deleted from a channel memory. Then a next channel number will appear so that you can continue adding or deleting channels. Stereo 7 Press SETUP button to exit SETUP menu. 24 E6500UD.QX 03.12.8 19:06 Page 25 Getting started Initial setting: Clock POWER TIMER PROG. DISPLAY A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H 3 OPEN/CLOSE G You will need to set the clock before you try the timer recording features. Set the clock using this menu, and we recommend to set the auto clock setting to AUTO to use the clock function effectively. Yon can set the daylight savings time depending on whether or not currently observing the daylight savings time. Select “Clock” using K / L / { / B buttons, then press ENTER button. Clock menu will appear. Setup > Clock Clock Setting Auto Clock Setting OFF Daylight Saving Time ON B PLAY REV FWD g h Setting the clock STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K 4 1 { B RETURN ZOOM L Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Select “Clock Setting” using K / L buttons, then press ENTER button. A clock setting window will appear. Setup > Clock Clock Setting Auto Clock Setting OFF Daylight Saving Time ON ---/--/----(---) --:-- Setup Menu 2 5 Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. Select the date (month / day / year) using K / L buttons, then press ENTER button. A cursor will move on the month. Setup Setup > Clock Clock Setting Auto Clock Setting OFF Daylight Saving Time ON JAN / - - / - - - - ( - - - ) --:-- Playback Setting 25 Getting started ENTER REPEAT E6500UD.QX 03.12.8 19:06 Page 26 Getting started POWER TIMER PROG. DISPLAY 6 9 Enter the date (month / day / year) using K / L buttons, then press ENTER button. Every time you enter a number, press { / B button to move the cursor. Press K / L buttons to select AM or PM, then press ENTER button. Clock menu will appear, then the settings will be activated. OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 Setup > Clock CM SKIP REC MODE CLEAR REC PAUSE Clock Setting SKIP k H Clock Setting Setup > Clock 0 Auto Clock Setting OFF Daylight Saving Time ON Auto Clock Setting OFF Daylight Saving Time ON G JAN / 12 / - - - - ( - - - ) --:-- B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL 10 K 7 ENTER REPEAT { B RETURN ZOOM L Select the time using K / L buttons, then press ENTER button. A cursor will move on hour. Setup > Clock Clock Setting Auto Clock Setting OFF Daylight Saving Time ON JAN / 12 / 2004 (MON) 09 : - - AM 8 Enter the time (hour / minute) using K / L buttons, then press { / B button. A cursor will move on AM or PM. Setup > Clock Clock Setting Auto Clock Setting OFF Daylight Saving Time ON JAN / 12 / 2004 (MON) 09 : 24 AM 26 Press SETUP button to exit SETUP menu. E6500UD.QX 03.12.8 19:06 Page 27 Getting started POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR Adjusting the clock automatically 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: 4 Select “Auto Clock Setting” using K / L buttons, then press ENTER button. Option window will appear. Setup > Clock Clock Setting Auto Clock Setting Daylight Saving Time 0 REC PAUSE OFF Auto Auto Manual Off SKIP k H G B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL 5 Setup Menu K { B RETURN ZOOM 2 L Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. Select “Auto” using K / L buttons, then press ENTER button. “OFF” has been selected as the default. We recommend to set the auto clock setting to “Auto” to use the clock function effectively. Setup 6 Press SETUP button to exit SETUP menu. Playback Setting 3 Select “Clock” using K / L / { / B buttons, then press ENTER button. Clock menu will appear. Setup > Clock Clock Setting Auto Clock Setting OFF Daylight Saving Time ON 27 Getting started ENTER REPEAT E6500UD.QX 03.12.8 19:06 Page 28 Getting started POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 CM SKIP REC MODE CLEAR Setting the daylight savings time 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: 4 Select “Daylight Saving Time” using K / L buttons, then press ENTER button. Daylight Saving Time options will appear. Setup > Clock Clock Setting 0 REC PAUSE Auto Clock Setting Daylight Saving Time SKIP k H G OFF ON OFF B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL Setup Menu 5 K ENTER REPEAT { B RETURN ZOOM 2 L Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. Select “ON” or “OFF” using K / L buttons, then press ENTER button. Choose “ON” when currently observing the daylight savings time. 6 Setup Press SETUP button to exit SETUP menu. Playback Setting 3 Select “Clock” using K / L / { / B buttons, then press ENTER button. Clock menu will appear. Setup > Clock Clock Setting 28 Auto Clock Setting OFF Daylight Saving Time ON E6500UD.QX 03.12.8 19:06 Page 29 Getting started POWER TIMER PROG. DISPLAY OPEN/CLOSE A Initial setting: Selecting the TV aspect ratio Play Back menu will appear. Setup > Play Back TV Aspect Parental Lock Disc Menu Language 1 3 2 CH 4 6 5 REC MONITOR 7 9 8 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G You can select the TV aspect ratio to match the formats of what you are playing with the DVD recorder and your TV screen (4:3 standard or 16:9 widescreen TV). “4:3 Letter Box” has been selected as the default. B PLAY REV FWD g h STOP 1 C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K { B RETURN ZOOM Subtitle Language Original OFF Digital Out Dynamic Range Control ON Fast Forward with Audio OFF 4 Select “TV Aspect” using K / L buttons, then press ENTER button. Option window will appear. Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language L Subtitle Language Getting started ENTER REPEAT Audio Language 4:3 Letter Box All English 16:9 Box Wide 4:3 Letter 8 & Scan 4:3 Pan 16:9English Wide Original OFF Digital Out Dynamic Range Control ON Fast Forward with Audio OFF 5 Setup Menu Select a desired option using K / L buttons, then press ENTER button. 2 Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. Setup Playback Setting 16:9 Wide: Choose when you have a widescreen TV. 4:3 Letter Box, 4:3 Pan & Scan: Choose one depending on which you will prefer to watch when you have a standard TV. Note: Refer to page xx for more information. 3 6 Select “Playback” using K / L / { / B buttons, then press ENTER button. Press SETUP button to exit SETUP menu. 29 E6500UD.QX 03.12.8 19:06 Page 30 Getting started POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH REC MONITOR 0 REC PAUSE SKIP k H G B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { B You can watch the TV programs from the tuner of the DVD recorder. To do this, be sure to make connections from the DVD recorder (TV ANTENNA OUT jack) to your TV (an antenna input jack) with an antenna cable. Refer to page 16. With the correct connection, the RF converter is ON after the DVD recorder is turned on. RETURN ZOOM Screen: RF Output CH 3 9 CM SKIP REC MODE CLEAR Initial setting: RF converter output (Watching the TV programs received by the tuner of the DVD recorder) RF Output CH 4 Front display: L To change the channel for RF converter: Press CLEAR button more than 3 seconds. A channel for RF converter will change between 3CH and 4CH at 3 seconds. Remote: CLEAR RF ON more than 3 sec. 3 sec. CH 3CH 3 sec. 4CH 3 sec. 3CH 3 sec. 30 To cancel the RF converter: Make one push of CLEAR button (Within 3 seconds). E6500UD.QX 03.12.8 19:06 Page 31 Getting started Getting started 31 E6500UD.QX 03.12.8 19:06 Page 32 Recording Information on DVD recording DVD-RW DVD-R This DVD recorder can record to DVD-R and DVD-RW discs. When recording, you will need to select a recording format between Video mode and VR mode depending on the disc format. The disc format for DVD-R is always “Video format,” then a recording format will be “Video mode,” so that you can play these discs, which are once finalized, in a regular DVD player. On the other hand, when recording to DVD-RW, a recording format will be “Video mode” or “VR mode” because a disc format is available between “Video Recording format” and “Video format” for DVD-RW. Logo Attributes 12cm, single-sided, single layer disc Approx. max. recording time (SEP mode): 600 minutes (4.7GB) Note: • This recorder cannot record CD-R or CD-RW discs. • DVD-R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD recorder may not play if the disc is damaged or dirty, or if there is dirt of condensation on the player’s lens. • If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) Disc type Disc format Functions DVD-RW VR mode Playing, limited recording, limited editing DVD-RW Video Video mode DVD-RW VR DVD-R 32 Video mode You can select a recording speed among 6 options, and the recoding time will depend on the recording speed you select as follows. Recording speed XP SP LP EP SLP SEP 12cm, single-sided, single layer disc Approx. max. recording time (SEP DVD-RW mode): 600 minutes (4.7GB) DVD-R Recording speed Playing, recording, Original/Playlist editing Playing, limited recording, limited editing Recording time 60 min 120 min 240 min 360 min 480 min 600 min Restrictions on recording You cannot record copy-protected video using this DVD recorder. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be dispayed on-screen. Video that is “copy-once only” can only be recorded using a DVD-RW disc in VR mode with CPRM (see below). When recording a TV broadcast or throgh an external input, you can display copy control information on screen. (see page xx). What is “CPRM”? CPRM is a copy protection system with scramble system regarding the recording of “copy once” broadcast programs. CPRM stands for Content Protection for Recordable Media. This DVD recorder is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs formatted in VR mode, and CPRM recordings can only be played on players that are specifically compatible with CPRM. E6500UD.QX 03.12.8 19:06 Page 33 Recording POWER TIMER PROG. DISPLAY OPEN/CLOSE Settings for recording to a blank disc DVD-RW A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G B PLAY REV FWD g h STOP C SETUP When inserting a blank disc, the DVD recorder starts to initialize the blank disc. After that, you can record to the disc with the recording format selected in SETUP menu. You are allowed to set a specified time for chapter marks. When setting a blank DVD+R or DVD+RW disc, this message will appear. MENU PLAY LIST TOP MENU/ ORIGINAL 2 Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. Setup Playback Setting 3 K Recording Error ENTER REPEAT { B RETURN ZOOM Can not record on this disc. L Select “Recording” using K / L / { / B buttons, then press ENTER button. Recording menu will appear. Setup > Recording DVD-RW Recording Format Auto Chapter 1 Video mode OFF Timer Programing Recording Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: 4 Select “DVD-RW Recording Format” using K / L buttons, then press ENTER button. Option window will appear. Setup Menu Setup > Recording DVD-RW Recording Format Video Video mode mode VR mode Auto Chapter OFF Timer Programing Video mode has been selected as the default. 33 E6500UD.QX 03.12.8 19:06 Page 34 Recording 5 POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 DVD-RW Select “Video” or “VR” using K / L buttons, then press ENTER button. The recording mode will be set. 6 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G B PLAY REV Select “Auto Chapter” using K / L buttons, then press ENTER button. Option window will appear. FWD h g STOP Setup > Recording C SETUP Formatting a disc MENU PLAY LIST TOP MENU/ ORIGINAL DVD-RW Recording Format Auto Chapter K Timer Programing ENTER REPEAT { B Video mode OFF 5 minutes OFF 10 minutes 15 minutes 30 minutes 60 minutes RETURN ZOOM If you are recording on a DVD-R disc, the recording mode will always be Video mode. If you are using a DVD-RW disc, by default it will be Video mode. You can change this to VR mode from SETUP menu. Note1: When reformatting, the contents of the disc will be erased. Note2: Be sure to select a recording format in SETUP menu for a DVDRW disc before you attempt to format. Refer to page xx “Settings for recording to a blank disc.” L “OFF” has been selected as the default. 7 Select a desired time option using K / L buttons, then press ENTER button. Chapter marks will put as you specified. 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: 8 Press SETUP button to exit SETUP menu. Setup Menu 2 Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. 34 E6500UD.QX 03.12.8 19:06 Page 35 Recording <Video mode> POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 <Video mode> Disc Disc Edit Edit Format Format Finalize Finalize 3 2 Yes 4 5 7 8 No Are you sure? Yes No CH 6 REC MONITOR 9 <VR mode> CM SKIP REC MODE CLEAR <VR mode> 0 REC PAUSE SKIP k H G Disc Disc Edit Edit Format Format Finalize B Finalize Disc Protect OFF PLAY REV FWD h g ON Disc Protect OFF Yes STOP MENU PLAY LIST TOP MENU/ ORIGINAL No Are you sure? Yes No C SETUP ON K ENTER REPEAT { B RETURN ZOOM 3 5 Select “Format” using K / L buttons, then press ENTER button. Option window will appear. <Video mode> Select “Yes” using { / B buttons, then press ENTER button. Formatting will start. L Recording Disc Edit Format Finalize Yes No 58% Formatting 6 <VR mode> Disc Formatting is complete. 100% will be indicated. Edit Format Finalize Disc Protect OFF Yes ON No 4 Select “Yes” using { / B buttons, then press ENTER button. Option window will appear. 100% Formatting Press SETUP button to exit DISC menu. 35 E6500UD.QX 03.12.8 19:06 Page 36 Recording POWER TIMER PROG. DISPLAY OPEN/CLOSE Recording from the TV DVD-RW A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 Follow the steps below to record TV programs. Recording starts immediately and continues until the disc is full or you stop recording. CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G B PLAY REV Note: When the clock setting has not been made, title names in the original or playlist will be blank. FWD g h STOP Disc > Edit C SETUP DVD-R When a DVD-RW disc is loaded: You can choose Video mode or VR mode from SETUP menu. “Video mode” has been selected as the default. Refer to page XX “Settings for recording to a blank disc.” Note: You cannot mix two formats on one DVD-RW disc. When you load a disc once recorded before, the recording format cannot be changed even you change it in SETUP menu. MENU PLAY LIST TOP MENU/ ORIGINAL 1 1 2 3 K ENTER REPEAT { B RETURN ZOOM 1 L When a DVD-R disc is loaded: DVD-R discs will always be in Video mode. 4 Select a desired channel to record using CH K / L buttons or number buttons. 1 Turn on the DVD recorder and load a recordable disc. Make sure that the TV input is set to the DVD recorder. The DVD recorder will require for a while to initialize the disc. 5 Press REC button to start recording. REC mark will be displayed for 5 seconds. 2 Select a recording speed using REC SPEED button. Refer to page XX “Recording speed.” 3 Format a disc. Refer to page xx “Formatting a disc.” 36 I To pause the recording, press PAUSE F button. Press REC button to restart the recording. To stop the recording, press STOP C button. E6500UD.QX 03.12.8 19:06 Page 37 Recording POWER TIMER PROG. DISPLAY OPEN/CLOSE One-touch timer recording Checking the recording picture quality This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. When the recording finishes the recorder automatically goes into standby. You can confirm the recording picture quality with the recording speed you have selected before attempting to record to a DVD disc. If the picture quality selected is not prefered, you can change the recording speed by pressing REC SPEED button. This is available while the DVD recorder is in STOP, REC, or REC pause with a DVD disc to record inserted. A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G 1 B PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K Select a desired channel to record using CH K / L buttons or number buttons. ENTER REPEAT { B RETURN ZOOM 2 L I 0:30 When reaches the specified time, the DVD recorder will be turned off automatically. To cancel the one-touch timer recording within the specified time, press STOP C button. Note: The DVD recorder will be turned off automatically under the conditions following. • No space remained on the disc. • When a power failure occurs. 1 While the DVD recorder is in STOP, REC, or REC pause with a DVD disc to record inserted, press REC MONITOR button. The TV program will be on the screen in the recording picture quality with the recording speed you have selected. CH 18 Rec Monitor XP 37 Recording Press REC button on the remote control or the front panel, then press REC button repeatedly until a desired recording time (30 minutes to 4 hours) appears on the TV screen. Recording will start. Note: You cannot check the recording sound with the Rec monitor function. The picture in the Rec monitor will be delayed than the sound. And the sound you will hear in the Rec monitor mode is not the same as recorded to be. E6500UD.QX 03.12.8 19:06 Page 38 Recording POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 If you want to change thte recording speed, press REC SPEED button repeatedly. The recording speed will be change as you press the button as shown. 3 2 XP CH 4 5 7 8 6 SP SEP LP SLP REC MONITOR 9 CM SKIP REC MODE CLEAR EP 0 REC PAUSE SKIP k H G 2 B PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL Press REC MONITOR button again to exit. Finalizing the discs DVD-RW DVD-R You will need to finalize the discs recorded in Video mode to play in other DVD players. Finalizing discs in Video mode automatically creates title menus. Note: Once you have finalized a disc recorded in Video mode, you cannot edit or record anything else on that disc. A VR mode disc can still be recorded and edited on this recorder even after finalizing. K Video mode: ENTER REPEAT { B RETURN ZOOM 1 L Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Setup Menu 2 Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. Disc Edit Format Finalize 38 38 E6500UD.QX 03.12.8 19:06 Page 39 Recording 3 POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 CH Select “Finalize” using K / L buttons, then press ENTER button. Option window will appear. 5 Finalizing is complete. REC MONITOR Disc 7 9 8 Edit CM SKIP REC MODE CLEAR Format 0 REC When selecting “No” and press ENTER or RETURN button, finalizing will be continued. PAUSE Finalize Yes SKIP k H No G 100% B PLAY REV FWD h g Finalizing STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL Press SETUP button to exit DISC menu. 4 K ENTER REPEAT { B RETURN ZOOM L Select “Yes” using { / B buttons, then press ENTER button. Finalizing will start. Recording 58% Finalizing To cancel finalizing, press STOP C button. Do you want to cancel? Yes No 58% Finalizing Select “Yes,” then press ENTER button. Finalizing is cancelled, then the DVD recorder will be in stop mode. Note: If appear when pressing STOP button, you can not cancel finalizing because the finalizing has been in certain progress. 39 E6500UD.QX 03.12.8 19:06 Page 40 Recording 4 VR mode: POWER TIMER PROG. DISPLAY OPEN/CLOSE 1 A 1 2 3 4 5 6 7 8 CH REC MONITOR Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Select “Yes” using { / B buttons, then press ENTER button. Finalizing will start. 9 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G 58% Finalizing B PLAY REV Setup Menu FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K To cancel finalizing, press STOP C button. 2 ENTER REPEAT { B RETURN ZOOM L Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. Do you want to cancel? Yes No 58% Finalizing Disc Edit Select “Yes,” then press ENTER button. Finalizing is cancelled, then the DVD recorder will be in stop mode. Format Finalize Disc Protect OFF ON Note: 3 Select “Finalize” using K / L buttons, then press ENTER button. Option window will appear. Disc Edit Format Finalize Disc Protect OFF Yes 40 ON No If appear when pressing STOP button, you can not cancel finalizing because the finalizing has been in certain progress. When selecting “No” and press ENTER or RETURN button, finalizing will be continued. E6500UD.QX 03.12.8 19:06 Page 41 Recording 5 POWER TIMER PROG. DISPLAY Timer recording OPEN/CLOSE A 1 2 3 4 5 6 7 8 DVD-RW Finalizing is complete. You can program the unit to record up to 8 programs, up to a year in advance. Daily or weekly program recordings are also available. CH REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE DVD-R 100% Finalizing 1 SKIP k H G B PLAY REV FWD Press SETUP button to exit DISC menu. Press TIMER PROG. button. Timer Programming list will appear. g h STOP Setup > Recording > Timer Programing C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL Date 1. - - 2. - - 3. - - 4. - - 5. - - 6. - - 7. - - 8. - - - K ENTER REPEAT { B RETURN ZOOM L Start End CH Speed Recording If you have not made the clock setting yet: A clock setting window will appear after pressing TIMER PROG. button. Setup > Clock Clock Setting Auto Clock Setting OFF Daylight Saving Time ON ---/--/----(---) --:-- Be sure to set the clock following step 4 through step 10 in “Initial setting: Clock” on page 25 and 26 before making a timer program. 2 Enter the necessary information for timer programming using K / L / { / B buttons, then press ENTER button. 41 E6500UD.QX 03.12.8 19:06 Page 42 Recording POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 K / L buttons: change the setting at the current cursor position. { / B buttons: move the cursor to the left and the right. Speed: Select a recording speed among XP, SP, LP, EP, SLP, and SEP. Refer to page XX “Recording speed.” Setup > Recording > Timer Programming CH REC MONITOR 9 CM SKIP REC MODE CLEAR Setup > Recording > Timer Programming 0 REC PAUSE SKIP k H G B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT Date Start 1. JAN/12 10:00PM 2. - - 3. - - 4. - - 5. - - 6. - - 7. - - 8. - - - Date: Enter the date. { B Date Start 1. JAN / 1 - - : - -AM 2. - - 3. - - 4. - - 5. - - 6. - - 7. - - 8. - - - End CH - - : - -AM CH8 Speed L Speed XP 3 When entering “Date”, you can select a daily or weekly programming. RETURN ZOOM End CH 10:30PM CH8 Start / End: Enter the time to start and to end. Press ENTER button when all information required is entered. Your program setting will be stored. 4 Setup > Recording > Timer Programming Date Start 1. JAN/12 10 :00PM 2. - - 3. - - 4. - - 5. - - 6. - - 7. - - 8. - - - End CH - - : - -AM CH8 Speed CH: Select the channel to record. You can select a channel among those stored in the DVD recorder with the channel presetting, L1, and L2 (Video IN). Setup > Recording > Timer Programming Date Start 1. JAN/12 10:00PM 2. - - 3. - - 4. - - 5. - - 6. - - 7. - - 8. - - - 42 End CH 10:30PM CH8 Speed Press POWER button to turn the DVD recorder off. (Timer icon) will appear on the front display. The DVD recorder will be turned on automatically 2 minutes in advance of the recording time to start and waits to start. Then the recording will start at the recording time you set. Note: To stop the timer recording in proceed, press STOP C button on the front panel. STOP C button on the remote control is not effective. Neither POWER button nor OPEN/CLOSE button is effective. E6500UD.QX 03.12.8 19:06 Page 43 Recording POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 Checking the imformation on the timer programming during the timer recording CH DVD-RW REC MONITOR CM SKIP REC MODE CLEAR 0 REC PAUSE DVD-R You are allowed to know the imformation on the timer programming during the timer recording. SKIP k H G 1 B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { During the timer recording, press TIMER PROG. button. Timer Programming list will appear. B Setup > Recording > Timer Programming RETURN ZOOM Date Start 1. JAN/12 10:00PM 2. - - 3. - - 4. - - 5. - - 6. - - 7. - - 8. - - - L End CH 10:30PM CH8 Speed XP Recording 2 Check the end time on the list. 3 To exit the timer programming list, press TIMER PROG. button again after you check the imformation. 43 E6500UD.QX 03.12.8 19:06 Page 44 Recording The priority of overlapped setings DVD-RW DVD-R The recorder records the programs according to priority if the timer settings overlap. The timer setting set previously has priority. If the timer settings overlap, the program that has priority will be recorded. A timer recording of lower priority will be canceled, start from the middle, or stop on the way. Check the overlapped timer settings and change the priority if necessary. When the starting time is same: A smaller program number PROG. 1 has priority. ex.1 ex. 2 PROG. 1 PROG. 1 PROG. 2 PROG. 2 PROG. 3 Actual recording PROG. 1 PROG. 2 Actual recording PROG. 1 When the recording time is partially overlapped: PROG. 1 will start after PROG. 2 is complete to be recorded. PROG. 1 PROG. 2 Actual recording PROG. 2 PROG. 1 When the recording time is entirely overlapped: PROG. 1 will not be recorded. PROG. 1 PROG. 2 Actual recording PROG. 2 When the end time of one and the starting time of another are same: The first 30 minutes of the following one will be cut off. PROG. 1 PROG. 2 Actual recording PROG. 1 PROG. 2 The first 30 minutes will be cut off. 44 PROG. 2 E6500UD.QX 03.12.8 19:06 Page 45 Recording POWER TIMER PROG. DISPLAY OPEN/CLOSE Setting a disc to protect DVD-RW VR A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC Select “Disc Protect OFF ➔ ON” using K / L buttons, then press ENTER button. Option window will appear. Disc Edit 1 Format Finalize Disc Protect OFF PAUSE ON SKIP k H B FWD h Yes G PLAY REV g STOP C SETUP To prevent accidental recording, editing, or erasing the titles, you can protect them from DISC menu. 3 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: MENU PLAY LIST TOP MENU/ ORIGINAL No 4 K ENTER REPEAT { Select “Yes” using { / B buttons, then press ENTER button. A disc will be protected. B RETURN ZOOM L Setup Menu Disc Edit 2 Format Finalize Disc Protect ON Recording Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. OFF 5 Disc Edit Format Finalize Disc Protect OFF ON Press SETUP button to exit DISC menu. 45 E6500UD.QX 03.12.8 19:06 Page 46 Recording Recording from an external component DVD-RW DVD-R You can record from an external component, such as a camcorder or VCR, connected to either LINE1 or LINE2 for external inputs. 2. Press SETUP button to display SETUP/DISC menu. Before attempting to record from an external component: 3. Select SETUP, then press ENTER button. 1. Connect the component from which you want to record properly to the DVD recorder. External equipment (VCR camcorder etc.) 4. Select “Select Video,” then press ENTER button. Setup > Select Video L1 (Rear) Video In L2 (Front) Video In OUTPUT S VIDEO VIDEO AUDIO L R 5. Select an input line among L1 and L2. S-Video cable or A/V cable Setup > Select Video L1 (Rear) L2 (Front) To LINE 2 IN DVD recorder rear of DVD recorder Video Video In In S-Video Video In 6. Select the input jack type to connect, then press ENTER button. Setup > Select Video L1 (Rear) S-Video In L2 (Front) Video In To LINE 1 IN External equipment (VCR camcorder etc.) : signal flow 46 Now you are ready to start recording from external component. E6500UD.QX 03.12.8 19:06 Page 47 Recording POWER TIMER PROG. DISPLAY A 1 2 3 4 5 6 7 8 9 CH REC MONITOR 7 Connect the component from which you want to record properly to the DVD recorder. Load the cassette tape to the component to record from, then set it in pause. 8 2 CM SKIP REC MODE CLEAR 0 REC 1 OPEN/CLOSE PAUSE SKIP k H G B PLAY REV FWD g h Turn the TV and the DVD recorder on, and be sure to select the input of the TV to which the DVD recorder is connected. STOP 9 C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K 3 ENTER REPEAT { B RETURN ZOOM L Press PAUSE F button and REC button to set the DVD recorder in REC pause at the same time. Recording will start. Press OPEN/CLOSE A button to open the disc tray, then place the disc to record properly. Press STOP C button on the DVD recorder to stop recording. 4 Recording Select the input of the DVD recorder which the component to record from is connected. 5 Select a recording mode using REC SPEED button. Refer to page XX “Recording speed.” XP SP SEP LP SLP EP 6 Press PAUSE F button to pause recording. 47 E6500UD.QX 03.12.8 19:06 Page 48 Playing discs Information on DVD play Before you attempt to play DVD discs, read the following information. Playable discs Region codes This DVD recorder is compatible to play the following discs. To play a DVD, make it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the DVD recorder. Other Disc types are not guaranteed to play. This System has a Region One (1) the DVD recorder. DVDs must be labeled for ALL regions or for Region 1 in order to play on the the DVD recorder. You cannot play DVDs that are labeled for other regions. Look for the symbols below on your DVDs. If these region symbols do not appear on your DVD, you cannot play the DVD in this the DVD recorder. Disc Logo DVD VIDEO CD-DA (AUDIO CD) The number inside the globe refers to region of the world. Region 1 represents the United States, Canada, upper regions of North America, Bermuda, the U.S.Virgin Islands, and small regions near Australia. A DVD labeled for a specific region can only play on the DVD recorder with the same region code. CD-R (CD-DA FORMAT) Color systems DVD-RW (VIDEO/VR FORMAT) DVD-R (VIDEO FORMAT) CD-RW (CD-DA FORMAT) 48 DVDs are recorded in different color systems throughout the world. The most common color systems are NTSC (which is used primarily in the United States and North America), PAL, and SECAM. This DVD Player uses NTSC, so DVDs you play must be recorded in the NTSC system. You cannot play DVDs recorded in other formats. The color system of the DVD may on the DVD or on the Disc case. E6500UD.QX 03.12.8 19:07 Page 49 Playing discs 4 Basic Play POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G B PLAY REV FWD h g DVD-RW DVD-R 1 Press POWER button on the remote control or the front panel of the DVD recorder. When you are playing a DVD, turn the TV on and be sure to select the input to which the DVD recorder is connected. Press TOP MENU/ORIGINAL button to display the title menu. You can change “Original” or “Playlist” of VR mode using MENU PLAY LIST. Video mode: Titlelist 2 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 5 STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { B JAN/1 1:00AM Press OPEN/CLOSE A button to open the disc tray. The disc tray will open. JAN/1 1:00AM VR mode: RETURN ZOOM L 3 Original Place the disc onto the disc tray with its label facing up and make sure to align the disc to the disc tray guide. 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 JAN/1 1:00AM 5 JAN/1 1:00AM Playlist 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 5 disc tray guide JAN/1 1:00AM JAN/1 1:00AM Select a desired title using K / L / { / B buttons, then press ENTER button. Playing will start. 49 Playing discs 5 E6500UD.QX 03.12.8 19:07 Page 50 Playing discs 6 POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H B FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL Note: You can resume play from where you stopped playing the disc. (Resume play) Refer to page XX for details about resume play. CD 1 Press POWER button on the remote control or the front panel of the DVD recorder. When you are playing a DVD, turn the TV on and be sure to select the input to which the DVD recorder is connected. G PLAY REV Press STOP C button to stop play. DVD-V K To eject the disc, press OPEN/CLOSE A button to open the disc tray, then remove the disc before turn the DVD recorder off. 2 Press OPEN/CLOSE A button to open the disc tray. The disc tray will open. ENTER REPEAT { B RETURN ZOOM 3 L Place the disc onto the disc tray with its label facing up and make sure to align the disc to the disc tray guide. 4 Press PLAY B button to start playing. Playing will start. If you are playing a DVD-Video disc, a menu may appear. Refer to page XX for details about a disc menu. 5 Press STOP C button to stop playing. 50 E6500UD.QX 03.12.8 19:07 Page 51 Playing discs POWER TIMER PROG. DISPLAY OPEN/CLOSE Playing discs using the disc menu A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G B PLAY REV FWD h g STOP C SETUP A DVD disc contains a disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection. Sometimes these are displayed automatically when you start playback, otherwise only appear when you press MENU PLAY LIST button. MENU PLAY LIST TOP MENU/ ORIGINAL 1 K ENTER REPEAT DVD-V { B RETURN ZOOM L Press MENU PLAY LIST button. The DVD main menu will appear. Screen: Menu 2 Select an item using K / L / { / B buttons, then press ENTER button to confirm. Continue this step to set up all the features you want or to start playing the disc from the menu. MENU PLAY LIST button: Displays a DVD disc menu – this varies with the disc and may be the same as the ‘Top menu.’ RETURN button: Returns to the previously displayed menu screen. K / L / { / B buttons: Moves the cursor around screen. Enter button: Selects the currently highlighted menu option. Number buttons: Selects a numbered menu option (some discs only). (Press ENTER after). 3 If the feature is not available, may appear on the TV screen. Press MENU PLAY LIST button to exit the menu. 51 Playing discs Note: Menus vary among discs. Refer to the information accompanying the disc for details. E6500UD.QX 03.12.8 19:07 Page 52 Playing discs POWER TIMER PROG. DISPLAY OPEN/CLOSE Playing discs using the title menu DVD-V A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE Some DVDs have a title menu, which lists the titles available on them. It helps you to start play at a specific title. 1 H G B PLAY REV FWD h g Press TOP MENU button. The title menu will appear. Screen: STOP C MENU PLAY LIST TOP MENU/ ORIGINAL TOP Menu K ENTER REPEAT { B RETURN ZOOM L If the feature is not available, may appear on the TV screen. 2 Select a title to play using the K / L / { / B buttons, then press ENTER button. Play will begin at the title you selected. TOP MENU button: Displays the ‘Top menu’ of a DVD disc – this varies with the disc. RETURN button: Returns to the previously displayed menu screen. 52 Enter button: Selects the currently highlighted menu option. Number buttons: Selects a numbered menu option (some discs only). (Press ENTER after). SKIP k SETUP K / L / { / B buttons: Moves the cursor around screen. 3 Press TOP MENU button to exit the title menu. Note: The TOP MENU button will not always active with all DVDs. E6500UD.QX 03.12.8 19:07 Page 53 Playing discs Resume play POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH You can resume play from where you stopped playing the disc last. 1 REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H During play, press STOP C button. The resume message will appear. Screen: Step by step playback 1 During play, press PAUSE F button. Play will pause and sound will be muted. G B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL F K ENTER REPEAT { Resume On B 2 RETURN ZOOM L 2 Press PLAY B button. In a few seconds, play will resume from the point at which it stopped last. You can resume play at the same point even if you turn off the DVD recorder. To cancel the resume play and start playing the disc from the beginning, press STOP C button the second time while the play is stopped. Press SKIP G button repeatedly. The play will advance one frame (or step) at a time you press the button with the sound muted. To play step by step backward: Press SKIP H button repeatedly. Every time you press the button, the play will go backward. Playing discs 3 Press PLAY B button to resume play. 53 E6500UD.QX 03.12.8 19:07 Page 54 Playing discs POWER TIMER PROG. DISPLAY Pause Repeat play 1 1 During play, press PAUSE F button. Play will pause and sound will be muted. During play, press REPEAT button. Repeat menu will appear. Screen for DVD: OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 CM SKIP REC MODE CLEAR 1 0 REC PAUSE 1 SKIP k H 01:23:45 DVD-Video Off Title Chapter All A-B G B PLAY REV FWD h g F STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL Screen for CD: K ENTER REPEAT { B 2 1 RETURN ZOOM L 00:00:00 Audio CD Off Track All A-B Press PLAY B button to resume play. 2 Select a desired option to repeat using K / L buttons, then press ENTER button. The selected repeat play will start. Title: The current title will be played repeatedly. (DVD only) Chapter: The current chapter will be played repeatedly. (DVD only) All: The current disc will be played repeatedly. (except DVD Video) 54 E6500UD.QX 03.12.8 19:07 Page 55 Playing discs POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 Press ENTER button to select the ending point (B). The A-B point will be played repeatedly. CM SKIP REC MODE CLEAR 0 REC A-B: When pressing ENTER button while A-B is highlighted, the starting point (A) will be decided. PAUSE SKIP k H G Zoom DVD 1 During play, press ZOOM button. Zoom menu will appear. Screen: Track: The current track will be played repeatedly. (CD only) 1 1 x1.2 01:23:45 x1.5 DVD-Video x2.0 B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { B RETURN ZOOM 2 L Select a desired zoom factor to zoom using { / B buttons, then press ENTER button. The zoom area will be displayed. Playing discs Note: When selecting a smaller factor than the current,the zoom area will not be displayed. 3 Select a desired zoom position using K / L / { / B buttons, then press ENTER button. The zoom play will start. 55 E6500UD.QX 03.12.8 19:07 Page 56 Playing discs Title/Chapter search POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH DVD Using SKIP H / G buttons 1 REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G B During play, press SKIP G button to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { To go back to the previous title or chapter, press SKIP H button. The title or chapter will move backward by one at a time. B RETURN ZOOM L Using DISPLAY button 1 During play, press DISPLAY button. The display menu will appear. Screen: 1 1 01:23:45 DVD-Video 2 Select icon using { / B button, then press ENTER button. ‘T’ for title will be highlighted. Title: Enter a desired title number to search using K / L buttons or number buttons, then press ENTER button. Title search will start. 56 Chapter: To move to ‘C’ for chapter, press B button. Enter a desired chapter number to search using K / L buttons or number buttons, then press ENTER button. Chapter search will start. E6500UD.QX 03.12.8 19:07 Page 57 Playing discs Time search Track search POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH CD Using SKIP H / G buttons 1 REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G During play, press SKIP G button to skip the current track and move to the next. The track will move forward by one at a time. 1 During play, press DISPLAY button. The display menu will appear. Screen: 1 1 01:23:45 DVD-Video B PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K To go back to the previous track, press SKIP H button. The track will move backward by one at a time. ENTER REPEAT { B RETURN ZOOM L Using DISPLAY button 1 During play, press DISPLAY button. The display menu will appear. Screen: 1 01:23:45 Audio CD 2 Select icon using { / B button, then press ENTER button. ‘T’ for track will be highlighted. To move to the clock icon, press B button. 3 Enter a desired time to search using K / L buttons or number buttons, then press ENTER button. Time search will start. Playing discs 2 Select icon using { / B button, then press ENTER button. ‘T’ for track will be highlighted. 3 Enter a desired track number to search using K / L buttons or number buttons, then press ENTER button. Track search will start. 57 E6500UD.QX 03.12.8 19:07 Page 58 Playing discs POWER TIMER PROG. DISPLAY OPEN/CLOSE Fast forward / Fast reverse search Slow forward / Slow reverse play 1 1 During play, press FWD D button to search in fast forward. To change the speed, press FWD D button repeatedly. Every time you press FWD D button, search speed will be changed as follows. During play, press PAUSE k button, then press FWD D button. Play in slow forward will start. To change the speed, press FWD D button repeatedly. Every time you press FWD D button, search speed will be changed as follows. A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G B PLAY REV FWD h Normal speed g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL x40 x1/2 K x20 ENTER REPEAT { Pause x2 x1/8 B RETURN ZOOM L x1/16 To search in fast reverse, press REV E button. Every time you press REV E button, search speed will be changed as follows. Normal speed x40 To play in slow reverse, press REV E. Every time you press REV E button, search speed will be changed as follows. Pause x5 x20 x1/4 x1/16 x1/8 To return to the normal play, press PLAY B button. 58 To return to the normal play, press PLAY B button. E6500UD.QX 03.12.8 19:07 Page 59 Playing discs POWER TIMER PROG. DISPLAY OPEN/CLOSE Skipping TV commercials during play Selecting the format of audio and video You can skip TV commercials by pressing CM SKIP button, so that you can enjoy the recorded programs without interrupting. You can select a audio and video format as you prefer dipending on the contents of the disc you are playing. 1 Switching audio soundtrack A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { B RETURN ZOOM L During play, press CM SKIP button. Normal play will start at 30 seconds ahead from the point you press CM SKIP button. Every time you press CM SKIP button, searching point will be extended by 30 second. You can press up to 6 times (180 seconds). DVD-V DVD-RW Video When playing a DVD-Video disc recorded with two or more soundtracks (these are often in different languages), you can switch between them anytime during playback. 1 During play, press DISPLAY button. The display menu will appear. Screen: 1 1 01:23:45 DVD-Video Select icon using { / B button, then press ENTER button. Audio menu will appear. 1 1 00:00:00 1 Dolby Digital 5.1ch English 2 Dolby Digital 2ch Japanese 59 Playing discs 2 E6500UD.QX 03.12.8 19:07 Page 60 Playing discs POWER TIMER PROG. DISPLAY A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G B PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { 3 2 Select a desired audio soundtrack using K / L buttons, then press ENTER button. Audio soundtrack will switch. Select icon using { / B button, then press ENTER button. Audio menu will appear. OPEN/CLOSE Note: Some discs will only allow you to change the soundtrack from the disc’s menu. Press TOP MENU/ ORIGINAL button or MENU PLAYLIST button to display this. Caution: Some discs feature both Dolby Digital and DTS soundtracks. There is no audio output when DTS is selected. B DVD-RW VR RETURN ZOOM L On DVD-RW discs recorded in VR mode that have both a main and a SAP (Secondary Audio Program) audio channel, you can switch between main(R), SAP(L), or a mix of both(L/R). 1 1 00:00:00 1 Dolby Digital Dual 2 Dolby Digital 2ch L/R ––– 3 Select a desired audio soundtrack using K / L buttons, then press ENTER button. Audio channel menu will appear. 1 1 00:00:00 1 Dolby Digital Dual 2 Dolby Digital 2ch L/RL/R –––L R 1 During play, press DISPLAY button. The display menu will appear. Screen: 1 1 01:23:45 DVD-RW VR Original 60 4 Select a desired audio channel using K / L buttons, then press ENTER button. Audio channel will switch. E6500UD.QX 03.12.8 19:07 Page 61 Playing discs CD POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 When playing Audio CDs you can switch between stereo, just the left channel or just the right channel. CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G 1 During play, press DISPLAY button. The display menu will appear. Screen: B PLAY REV 1 FWD h 00:00:00 g STOP Switching subtitles DVD-V DVD-RW VR Many DVD Video discs have subtitles in one or more languages – the disc box will usually tell you which subtitle languages are available. You can switch subtitle languages anytime during playback. 1 During play, press DISPLAY button. The display menu will appear. Screen: C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL 1 1 01:23:45 DVD-Video K ENTER REPEAT { B RETURN ZOOM L 2 Select icon using { / B button, then press ENTER button. Audio menu will appear. 3 2 Select icon using { / B button, then press ENTER button. Subtitle menu will appear. 1 Select a desired audio channel using K / L buttons, then press ENTER button. Audio channel will switch. 1 00:00:00 DVD-Video off 1 English 2 Japanese Playing discs 3 Select a desired subtitle language using K / L buttons, then press ENTER button. Subtitle will be displayed in the selected language. When selecting “OFF,” subtitle will be disappeared. 61 E6500UD.QX 03.12.8 19:07 Page 62 Playing discs POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH Note: Some discs will only allow you to change the subtitle from the disc menu. Press TOP MENU/ button ORIGINAL or MENU button PLAYLIST button to display the disc menu. REC MONITOR 9 CM SKIP REC MODE CLEAR Switching camera angles 0 REC PAUSE DVD-V 1 During play, press DISPLAY button. The display menu will appear. Screen: DVD-V 1 1 01:23:45 DVD-Video SKIP k H G B PLAY REV FWD h g STOP C SETUP Reducing block noise MENU PLAY LIST TOP MENU/ ORIGINAL Some DVD Video discs feature scenes shot from two or more angles–check the disc box for details: it should be marked with a angle icon if it contains multiangle scenes. K ENTER REPEAT { B 1 2 During play, press DISPLAY button. The display menu will appear. Screen: Select icon using { / B button, then press ENTER button. NR menu will appear. RETURN ZOOM L 1 1 01:23:45 DVD-Video 1 1 00:00:00 DVD-Video off Type 1 Type 2 62 2 3 Select icon using { / B button, then press ENTER button. Angle will switch. Select a desired option using K / L buttons, then press ENTER button. Your setting will be activated. E6500UD.QX 03.12.8 19:07 Page 63 Playing discs Playing discs 63 E6500UD.QX 03.12.8 19:07 Page 64 Editing Information on disc editing Editing playlists You can make the discs with editing functions following of the DVD recorder as you prefer. You can create a playlist from original titles, so that you can edit as you prefer without losing original titles. Followings are the items you can edit with a playlist. • Deleting titles (Refer to page XX) • Deleting parts of titles (Refer to page XX) • Putting names on titles (Refer to page XX) • Setting or clearing chapter markers (Refer to page XX) • Setting pictures for thumbnails (Refer to page XX) • Adding titles to a playlist (Refer to page XX) • Deleting a playlist (Refer to page XX) Editing discs with Video mode You can edit discs with Video mode for the following items. Be sure that once you edit titles, they will not remain as original. • Deleting titles (Refer to page XX) • Putting names on titles (Refer to page XX) • Setting or clearing chapter markers (Refer to page XX) Note: • Once a disc is finalized, then editing the disc or recording to the disc will not be available. (Except DVD-RW discs with VR mode.) • A playlist is not available with the discs in Video mode. Editing DVD-R discs Followings are the items you can edit DVD-R discs. • Deleting titles (Refer to page XX) • Putting names on titles (Refer to page XX) Editing discs with VR mode For discs with VR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the original. Table for characters to enter Number buttons 1 Editing original titles Followings are the items you can edit the original. • Deleting titles (Refer to page XX) • Deleting parts of titles (Refer to page XX) • Putting names on titles (Refer to page XX) • Setting or clearing chapter markers (Refer to page XX) • Setting pictures for thumbnails (Refer to page XX) • Setting titles to protect (Refer to page XX) Note: Original titles once edited will not be remained as recorded originally. When you want to leave the original as it is, create the playlist to edit as you prefer. (Refer to page XX) 64 2 Highlight ABC <space> abc <space> 123 0 @!? <space> !”#$% &‘ ( ) * + ,- ./ :; <=>? @[]^ _{|} !”#$% &‘ ( ) * + ,- ./ :; <=>? @[]^ _{|} 1 !”#$% &‘ ( ) * + ,- ./ :; <=>? @[]^ _{|} 3 ABC abc 2 4 DEF der 3 5 GHI ghi 4 6 JKL jkl 5 7 MNO mno 6 8 PQRS pqrs 7 9 TUV tuv 8 0 WXYZ wxyz 9 E6500UD.QX 03.12.8 19:07 Page 65 Editing 2 Editing discs POWER A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G B PLAY REV FWD h g STOP C SETUP Be sure that once you edit original titles, they will not be remained as recorded originally. When you want to leave original titles as recorded originally for DVD-RW with VR mode, create a playlist first, then edit it as you prefer. Followings are the ways to edit discs in each format DVD-R, which is always in Video mode, DVD-RW, which may be either in Video mode or VR mode. MENU PLAY LIST TOP MENU/ ORIGINAL K { B Deleting titles RETURN ZOOM L Disc > Edit 1 JAN/ 1 1:00AM CH12 Title Delete Edit Title Name Chapter Mark XP 0:01:25 3 DVD-RW Video ENTER REPEAT Select a desired title using K / L / { / B buttons, then press ENTER button. Edit menu will appear. You can delete titles which you do not need anymore. Be sure to know that the titles once deleted cannot be brought back to the disc. When the last title in the title list in Video mode is deleted, the disc space to record will be increased. 1 Select “Title Delete” using K / L buttons, then press ENTER button. Option window will appear. Disc > Edit 1 Title Delete Edit Title Name Chapter Mark Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 4 Select “Edit” from DISC menu using K / L buttons, then press ENTER button. Titlelist will appear. Screen: Select “Yes” using { / B buttons, then press ENTER button. Title will be deleted. Disc > Edit Disc > Edit 1 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 Title Delete Edit Title Name Chapter Mark Yes 5 JAN/ 1 1:00AM CH12 No XP Writing to Disc JAN/1 1:00AM JAN/1 1:00AM 5 Press SETUP button to exit DISC menu. 65 Editing TIMER PROG. DISPLAY OPEN/CLOSE E6500UD.QX 03.12.8 19:07 Page 66 Editing Putting names on titles POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR A window for entering a title name will appear. You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist. Disc > Edit > Edit Title Name 1 ABC abc 123 @!? JAN/ 1 1:00AM CH12 XP 1 0:01:25 0 REC PAUSE SKIP k H G B PLAY REV FWD h g STOP Select “Edit” from DISC menu using K / L buttons, then press ENTER button. Titlelist will appear. Screen: C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL Disc > Edit K ENTER REPEAT { 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM B RETURN ZOOM 4 L JAN/1 1:00AM 5 JAN/1 1:00AM 2 Select a desired title using K / L / { / B buttons, then press ENTER button. Edit menu will appear. 4 Enter a title name using K / L / { / B buttons and number buttons as specified below. To delete letters, press CLEAR button. Refer to page 62 “Table for characters to enter.” <Example : when putting the name “News23”> 1. Select “ABC” using K / L buttons, then press Enter button. Disc > Edit > Edit Title Name 1 Disc > Edit 1 ABC abc 123 @!? Title Delete Edit Title Name Chapter Mark 0:01:25 JAN/ 1 1:00AM CH12 XP 0:01:25 3 2. Press 6 twice using number buttons. Disc > Edit > Edit Title Name Select “Edit Title Name” using K / L buttons, then press ENTER button. 1 ABC abc 123 @!? N 0:01:25 66 E6500UD.QX 03.12.8 19:07 Page 67 Editing POWER A Disc > Edit > Edit Title Name 1 2 3 4 5 6 7 8 1 CH ABC abc 123 @!? REC MONITOR 9 Select “Yes” using { / B buttons, then press ENTER button. The name you entered will be activated for the title. N Disc > Edit > Edit Title Name CM SKIP REC MODE CLEAR 5 0:01:25 1 0 REC PAUSE SKIP k H G B PLAY REV FWD h g STOP Editing TIMER PROG. DISPLAY OPEN/CLOSE 3. Select “abc” using K / L buttons, the press Enter button. 4. Press 3 twice, 9 once and 7 four times using number buttons. ABC abc 123 @!? Yes No abc Writing to Disc C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K Disc > Edit > Edit Title Name 1 ENTER REPEAT { B ABC abc 123 @!? RETURN ZOOM L 6 Press SETUP button to exit DISC menu. News 0:01:25 5. Select “123” using K / L buttons, then press Enter button. Disc > Edit > Edit Title Name 1 ABC abc 123 @!? News 0:01:25 6. Press 2 and 3 using number buttons, then press Enter button. Option window will appear. Disc > Edit > Edit Title Name 1 ABC abc 123 @!? Yes No News23 0:01:25 67 E6500UD.QX 03.12.8 19:07 Page 68 Editing POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC PAUSE Setting or clearing chapter markers Disc > Edit You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can set chapter markers every at a specified time you selected among options for a title of more than 5 minutes. SKIP k H 1 B FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { 1 JAN/ 1 1:00AM CH12 B XP 0:01:25 4 Select “Edit” from DISC menu using K / L buttons, then press ENTER button. Titlelist will appear. Screen: Select a desired time using K / L buttons, then press ENTER button. Option window will appear. Disc > Edit 1 RETURN ZOOM Title Delete Off Edit Title5Name minutes Chapter 10Mark minutes 15 minutes 30 minutes 60 minutes G PLAY REV Option window will appear. L Disc > Edit Title Delete Off Edit Title5Name minutes Chapter 10Mark minutes 15 minutes 30 minutes 60 minutes Yes 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM JAN/ 1 1:00AM CH12 No XP 0:01:25 4 JAN/1 1:00AM 5 Note: You cannot select a time for putting markers more than a length of a title. JAN/1 1:00AM 2 Select a desired title using K / L / { / B buttons, then press ENTER button. Edit menu will appear. Disc > Edit 1 JAN/ 1 1:00AM CH12 Title Delete Edit Title Name Chapter Mark XP 5 Select “Yes” using { / B buttons, then press ENTER button. A chapter marker will be added. Note: A chapter marker may be delayed according to the recording content. 0:01:25 6 3 Select “Chapter Mark” using K / L buttons, then press ENTER button. 68 Press SETUP button to exit DISC menu. 68 E6500UD.QX 03.12.8 19:07 Page 69 Editing DVD-RW VR POWER OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC PAUSE Disc > Original Deleting titles 1 When a title is deleted from an original list in VR mode, the disc space to record will be increased. Be sure to know that the titles once deleted cannot be brought back to the disc. SKIP k H G 1 B PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { B Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: RETURN ZOOM Original menu will appear. JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON XP 0:01:25 4 Select “Title Delete” using K / L buttons, then press ENTER button. Option window will appear. Disc > Original 1 Disc L Editing TIMER PROG. DISPLAY Original Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Protect OFF ON Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 5 Original 2 Select “Original” using { / B buttons, then press ENTER button. Original list will appear. Select “Yes” using { / B buttons, then press ENTER button. Title will be deleted. Disc > Original 1 Disc > Original 1 1 2 Yes 3 JAN/ 1 1:00AM CH12 JAN/1 1:00AM 4 JAN/1 1:00AM JAN/1 1:00AM Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Protect OFF ON No XP Writing to Disc JAN/1 1:00AM 5 JAN/1 1:00AM 3 6 Press SETUP button to exit DISC menu. Select a desired title using K / L / { / B buttons, then press ENTER button. 69 E6500UD.QX 03.12.8 19:07 Page 70 Editing Deleting parts of titles POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC PAUSE H G B PLAY REV FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL Disc > Original You can delete a specified part of a title, then the disc space to record will be increased. Be sure to know that the parts once deleted cannot be brought back to the disc. 1 1 JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON XP 0:01:25 4 SKIP k Original menu will appear. Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: Select “Scene Delete” using K / L buttons, then press ENTER button. Option window will appear. K Disc Disc > Original ENTER REPEAT { 1 B RETURN ZOOM L JAN/ 1 1:00AM CH12 Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete Protect OFF XP 0:00:55 Original 2 5 Select “Original” using { / B buttons, then press ENTER button. Original list will appear. Press ENTER button to decide a start point, then press ENTER button to decide a end point. A cursor will move to “Preview.” You can check a preview. Disc > Original 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 JAN/1 1:00AM 6 5 JAN/1 1:00AM 3 Select “Delete” using K / L buttons, then press ENTER button. Option window will appear. Disc > Original Select a desired title using K / L / { / B buttons, then press ENTER button. 1 Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete Protect OFF Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 70 E6500UD.QX 03.12.8 19:07 Page 71 Editing POWER Putting names on titles Select “Yes” using { / B buttons, then press ENTER button. Part of a title will be deleted. You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist. OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH REC MONITOR Disc > Original 1 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete Protect OFF Yes G JAN/ 1 1:00AM CH12 No XP Writing to Disc B PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL 1 Select “Edit” from DISC menu using K / L buttons, then press ENTER button. Disc menu will appear. Screen: 8 Disc K ENTER REPEAT { B RETURN ZOOM Press SETUP button to exit DISC menu. L Original 2 Select “Original” using { / B buttons, then press ENTER button. Original list will appear. Disc > Original 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 JAN/1 1:00AM 5 JAN/1 1:00AM 71 Editing TIMER PROG. DISPLAY 7 E6500UD.QX 03.12.8 19:07 Page 72 Editing 3 POWER TIMER PROG. DISPLAY Option window will appear. OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH Disc > Original > Edit Title Name Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. Yes No 0:01:25 Disc > Original 1 CM SKIP REC MODE CLEAR 0 PAUSE SKIP k H Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON JAN/ 1 1:00AM CH12 XP 0:01:25 PLAY REV FWD g h STOP C MENU PLAY LIST TOP MENU/ ORIGINAL 4 K ENTER REPEAT { B RETURN ZOOM L 6 G B SETUP ABC abc 123 @!? abc REC MONITOR REC 1 Select “Yes” using { / B buttons, then press ENTER button. The name you entered will be activated for the title. Select “Edit Title Name” using K / L buttons, then press ENTER button. A window for entering a title name will appear. Disc > Original > Edit Title Name 1 ABC abc 123 @!? Yes No abc Writing to Disc Disc > Original > Edit Title Name 1 ABC abc 123 @!? JAN/ 1 1:00AM CH12 XP 0:01:25 5 Enter a title name using K / L / { / B buttons and number buttons then press ENTER button. To delete letters, press CLEAR button. Refer to page 62 “Table for characters to enter.” 72 7 Press SETUP button to exit DISC menu. E6500UD.QX 03.12.8 19:07 Page 73 Editing POWER A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can put a chapter marker anywhere you want. When the number of chapter markers in the original list comes to 999 in total, you cannot add chapter markers. 3 Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. Disc > Original 1 JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON XP 0:01:25 B PLAY REV FWD g h STOP 1 C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { B RETURN ZOOM L Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: 4 Select “Chapter Mark” using K / L buttons, then press ENTER button. Option window will appear. Disc Disc > Original 1 JAN/ 1 1:00AM CH12 Original Title Delete Scene Delete Edit Title Name ChapterAdd Mark Delete Index Picture Protect OFF ON XP 0:01:25 2 5 Select “Original” using { / B buttons, then press ENTER button. Original list will appear. Select “Add” using K / L buttons, then press ENTER button. Option window will appear. Disc > Original Disc > Original 1 1 2 3 1 JAN/1 1:00AM 4 JAN/1 1:00AM JAN/1 1:00AM 5 Title Delete Scene Delete Edit Title Name ChapterAdd Mark Delete Index Picture Protect OFF ON Yes JAN/1 1:00AM JAN/1 1:00AM JAN/ 1 1:00AM CH12 No XP 0:01:25 73 Editing TIMER PROG. DISPLAY OPEN/CLOSE Setting or clearing chapter markers E6500UD.QX 03.12.8 19:07 Page 74 Editing 6 POWER TIMER PROG. DISPLAY Setting pictures for thumbnails OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH Select “Yes” using { / B buttons, then press ENTER button. A chapter marker will be added. REC MONITOR Disc > Original 1 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H Title Delete Scene Delete Edit Title Name ChapterAdd Mark Delete Index Picture Protect OFF ON Yes G JAN/ 1 1:00AM CH12 No XP Writing to Disc B PLAY REV FWD h g You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default. Note: If a selected picture for a thumbnail is deleted by deleting a part of a title, a default picture will be selected. STOP C SETUP Disc > Original MENU PLAY LIST TOP MENU/ ORIGINAL 1 K Chapter 2/2 ENTER REPEAT { B Title Delete Scene Delete Edit Title Name ChapterAdd Mark Delete Index Picture Protect OFF ON RETURN ZOOM JAN/ 1 1:00AM CH12 L XP 0:01:25 7 1 Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: Disc Press SETUP button to exit DISC menu. Original 2 Select “Original” using { / B buttons, then press ENTER button. Original list will appear. Disc > Original 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 JAN/1 1:00AM 74 5 JAN/1 1:00AM E6500UD.QX 03.12.8 19:07 Page 75 Editing 3 POWER OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. REC MONITOR 1 Disc > Original 1 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON G JAN/ 1 1:00AM CH12 XP 0:01:25 B PLAY REV FWD h To prevent accidental recording, editing, or erasing the titles, you can protect them from the original menu. Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL Disc 4 K ENTER REPEAT { B RETURN ZOOM L Select “Index Picture Set” using K / L buttons, then press ENTER button. Option window will appear. Disc > Original > Index Picture Set 1 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 Original 2 Select “Original” using { / B buttons, then press ENTER button. Original list will appear. 5 Disc > Original Select “Yes” using { / B buttons, then press ENTER button. A picture for thumbnail will be set. Disc > Original > Index Picture Set 1 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON Yes JAN/ 1 1:00AM CH12 No XP 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 JAN/1 1:00AM 5 JAN/1 1:00AM 3 Select a desired title using K / L / { / B buttons, then press ENTER button. Writing to Disc 6 Press SETUP button to exit DISC menu. 75 Editing TIMER PROG. DISPLAY Setting titles to protect E6500UD.QX 03.12.8 19:07 Page 76 Editing Original menu will appear. POWER TIMER PROG. DISPLAY OPEN/CLOSE Disc > Original 1 A 1 2 3 4 5 6 7 8 9 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON CH JAN/ 1 1:00AM CH12 XP REC MONITOR 0:01:25 4 0 PAUSE SKIP k H G B PLAY REV FWD h g STOP C SETUP You are allowed to release the titles once protected from protecting. 1 CM SKIP REC MODE CLEAR REC Releasing titles from protecting MENU PLAY LIST TOP MENU/ ORIGINAL Select “Protect OFF ➔ ON” using K / L buttons, then press ENTER button. Option window will appear. Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: Disc K Disc > Original ENTER REPEAT { 1 B RETURN ZOOM L Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON Yes JAN/ 1 1:00AM CH12 Original No XP 0:01:25 2 5 Select “Yes” using { / B buttons, then press ENTER button. Select “Original” using { / B buttons, then press ENTER button. Original list will appear. Disc > Original Disc > Original 1 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON Yes JAN/ 1 1:00AM CH12 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 5 No JAN/1 1:00AM XP JAN/1 1:00AM Writing to Disc 6 Press SETUP button to exit DISC menu. To protect a whole disc (DVD-RW VR mode Only): Select “Disc Protect” from Disc menu, then select “Yes.” 76 3 Select a desired title using K / L / { / B buttons, then press ENTER button. E6500UD.QX 03.12.8 19:07 Page 77 Editing Original menu will appear. POWER 2 3 4 5 6 7 8 9 1 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect ON OFF CH JAN/ 1 1:00AM CH12 XP REC MONITOR 0:01:25 CM SKIP REC MODE CLEAR 4 0 REC PAUSE SKIP k H B REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL Select “Protect ON ➔ OFF” using K / L buttons, then press ENTER button. Option window will appear. K Disc > Original ENTER REPEAT { 1 B RETURN ZOOM Deleting titles In VR mode, even when a title is deleted from the playlist, the original title will remain. The disc space to record will not be increased. 1 G PLAY Playlist Disc > Original A 1 DVD-RW VR L Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect ON OFF Yes JAN/ 1 1:00AM CH12 Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: Disc No XP 0:01:25 Original 5 Select “Yes” using { / B buttons, then press ENTER button. Disc > Original 1 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect ON OFF Yes JAN/ 1 1:00AM CH12 No 2 Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. Disc > Playlist 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM XP Writing to Disc 4 6 JAN/1 1:00AM 5 Add New Title Delete PlayList JAN/1 1:00AM Press SETUP button to exit DISC menu. 77 Editing TIMER PROG. DISPLAY OPEN/CLOSE E6500UD.QX 03.12.8 19:07 Page 78 Editing 3 POWER TIMER PROG. DISPLAY Deleting parts of titles OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. REC MONITOR Disc > Playlist 1 CM SKIP REC MODE CLEAR 0 REC PAUSE Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set SKIP k H JAN/ 1 1:00AM CH12 XP 0:01:25 PLAY FWD g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL 4 K ENTER REPEAT { B RETURN ZOOM L 1 G B REV You can delete a specified part of a title. Even when a title is deleted from the playlist, the original title will remain. The disc space to record will not be increased. Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: Select “Title Delete” using K / L buttons, then press ENTER button. Option window will appear. Disc Disc > Playlist 1 Yes JAN/ 1 1:00AM CH12 Original Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture No 2 XP 0:01:25 Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. 5 Select “Yes” using { / B buttons, then press ENTER button. Title will be deleted. Disc > Playlist 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 5 Disc > Playlist JAN/1 1:00AM 1 JAN/1 1:00AM Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Yes JAN/ 1 1:00AM CH12 Add New Title Delete PlayList No 3 XP Writing to Disc 6 78 Press SETUP button to exit DISC menu. Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. E6500UD.QX 03.12.8 19:07 Page 79 Editing 6 Disc > Playlist POWER 1 A 1 2 3 4 5 6 7 8 9 JAN/ 1 1:00AM CH12 CH Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set XP 0:01:25 Select “Delete” using K / L buttons, then press ENTER button. Option window will appear. REC MONITOR Disc > Playlist CM SKIP REC MODE CLEAR 0 REC PAUSE 1 4 SKIP k H G B PLAY REV FWD h g STOP MENU PLAY LIST TOP MENU/ ORIGINAL Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete Yes Select “Scene Delete” using K / L buttons, then press ENTER button. Option window will appear. C SETUP Editing TIMER PROG. DISPLAY OPEN/CLOSE JAN/ 1 1:00AM CH12 No XP 0:01:25 7 Disc > Playlist K 1 ENTER REPEAT { B RETURN ZOOM Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete L JAN/ 1 1:00AM CH12 XP 0:00:55 Select “Yes” using { / B buttons, then press ENTER button. Part of a title will be deleted. Disc > Playlist 1 5 Press ENTER button to decide a start point, then press ENTER button to decide a end point. A cursor will move to “Preview”. You can check a preview. Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete Yes JAN/ 1 1:00AM CH12 No XP Writing to Disc 8 Press SETUP button to exit DISC menu. 79 E6500UD.QX 03.12.8 19:07 Page 80 Editing POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR Putting names on titles 3 You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist. Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. Disc > Playlist 1 1 0 REC PAUSE SKIP k H G B PLAY REV FWD g h STOP Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: MENU PLAY LIST TOP MENU/ ORIGINAL XP 0:01:25 4 C SETUP JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Disc K ENTER REPEAT { Select “Edit Title Name” using K / L buttons, then press ENTER button. A window for entering a title name will appear. B RETURN ZOOM L Original Disc > Playlist > Edit Title Name 2 1 Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM JAN/ 1 1:00AM CH12 XP 0:01:25 5 Disc > Playlist 4 ABC abc 123 @!? 5 JAN/1 1:00AM Add New Title Delete PlayList Enter a title name using K / L / { / B buttons and number buttons, then press ENTER button. To delete letters, press CLEAR button. Refer to page 62 “Table for characters to enter.” 80 E6500UD.QX 03.12.8 19:07 Page 81 Editing Option window will appear. POWER OPEN/CLOSE Disc > Playlist > Edit Title Name 1 A 1 2 3 4 5 6 7 8 9 CH ABC abc 123 @!? Yes REC MONITOR 0:01:25 CM SKIP REC MODE CLEAR 6 0 REC PAUSE SKIP k H G B PLAY REV FWD g h STOP C SETUP No abc MENU PLAY LIST TOP MENU/ ORIGINAL K Select “Yes” using { / B buttons, then press ENTER button. The name you entered will be activated for the title. ENTER REPEAT { Disc > Playlist > Edit Title Name B 1 RETURN ZOOM L ABC abc 123 @!? Yes You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can put a chapter marker anywhere you want. When the number of chapter markers in the playlist comes to 999 in total, you cannot add chapter markers. 1 Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: No Disc abc Writing to Disc 7 Original Press SETUP to exit DISC menu. 2 Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. Disc > Playlist 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 JAN/1 1:00AM 5 Add New Title Delete PlayList JAN/1 1:00AM 81 Editing TIMER PROG. DISPLAY Setting or clearing chapter markers E6500UD.QX 03.12.8 19:07 Page 82 Editing POWER TIMER PROG. DISPLAY 3 6 Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. Select “Yes” using { / B buttons, then press ENTER button. A chapter marker will be added. OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH REC MONITOR Disc > Playlist Disc > Playlist 1 CM SKIP REC MODE CLEAR 0 REC PAUSE Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set 1 Title Delete Scene Delete Edit Title Name ChapterAdd Mark DeleteSet Index Picture SKIP k H Yes G JAN/ 1 1:00AM CH12 JAN/ 1 1:00AM CH12 XP Writing to Disc 0:01:25 B No XP PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL 4 Disc > Playlist 1 K ENTER REPEAT { B RETURN ZOOM L Disc > Playlist 1 JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name ChapterAdd Mark DeleteSet Index Picture XP 0:01:25 5 Select “Add” using K / L buttons, then press ENTER button. Option window will appear. Disc > Playlist 1 Title Delete Scene Delete Edit Title Name ChapterAdd Mark DeleteSet Index Picture Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 82 Chapter 2/2 Select “Chapter Mark” using K / L buttons, then press ENTER button. Option window will appear. JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name ChapterAdd Mark DeleteSet Index Picture XP 0:01:25 7 Press SETUP button to exit DISC menu. E6500UD.QX 03.12.8 19:07 Page 83 Editing POWER A 1 2 3 4 5 6 7 8 9 CH REC MONITOR You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default. Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear Disc > Playlist 1 CM SKIP REC MODE CLEAR 0 REC 3 PAUSE SKIP k H G B PLAY REV FWD h g Note: If a selected picture for a thumbnail is deleted by deleting a part of a title, a default picture will be selected. JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set XP 0:01:25 . STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K 4 1 ENTER REPEAT { B RETURN ZOOM L Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: Select “Title Delete” using K / L buttons, then press ENTER button. Option window will appear. Disc > PlayList > Index Picture Set 1 Disc Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 Original 5 2 Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. Select “Yes” using { / B buttons, then press ENTER button. A picture for thumbnail will be set. Disc > PlayList > Index Picture Set Disc > Playlist 1 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 5 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Yes Add New Title Delete PlayList JAN/ 1 1:00AM CH12 No XP Writing to Disc JAN/1 1:00AM JAN/1 1:00AM 6 Press SETUP button to exit DISC menu. 83 Editing TIMER PROG. DISPLAY OPEN/CLOSE Setting pictures for thumbnails E6500UD.QX 03.12.8 19:07 Page 84 Editing POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH 3 Adding titles to a playlist You can add or delete a title in the playlist as you prefer. You can add titles to the playlist up to 99. Select “Add New Title” using K / L / { / B buttons, then press ENTER button. Original list will appear. REC MONITOR CM SKIP REC MODE CLEAR Disc > Playlist > Add New Title 1 1 2 1 3 0 JAN/10 10:30AM REC PAUSE SKIP k H G B PLAY REV FWD h g STOP C SETUP Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: MENU PLAY LIST TOP MENU/ ORIGINAL Disc K ENTER REPEAT { JAN/12 8:00PM 4 Select a desired title using K / L / { / B buttons, then press ENTER button. B RETURN ZOOM JAN/12 5:00PM L Original 2 58% Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. Data Writing Disc > Playlist Disc > Playlist 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 1 1 2 3 JAN/1 00:00AM JAN/1 00:00AM JAN/1 00:00AM 5 6 4 JAN/1 00:00AM 4 JAN/1 1:00AM 5 JAN/1 00:00AM JAN/12 8:00AM Add New Title Delete PlayList JAN/1 1:00AM 5 Press SETUP button to exit DISC menu. To delete a title from playlist, refer to page 76 “Deleting titles.” To delete a playlist, refer to page XX “Deleting a playlist.” 84 E6500UD.QX 03.12.8 19:07 Page 85 Editing 3 Deleting a playlist POWER A 1 2 3 4 5 6 7 8 9 CH REC MONITOR 0 PAUSE H 1 1 2 3 JAN/1 00:00AM JAN/1 00:00AM JAN/1 00:00AM B REV FWD h g STOP C MENU PLAY LIST TOP MENU/ ORIGINAL 4 K Select “Edit” from DISC menu using K / L buttons, then press ENTER button. DISC menu will appear. Screen: ENTER { JAN/1 00:00AM JAN/1 00:00AM Add New Title Delete Playlist Yes No 4 Select “Yes” using { / B buttons, then press ENTER button. A playlist will be erased. Disc B RETURN ZOOM 5 G PLAY REPEAT Disc > Playlist 1 SKIP k SETUP Note: Deleting a playlist will not increase the available recording time. Select “Delete PlayList” using K / L / { / B buttons, then press ENTER button. Option window will appear. CM SKIP REC MODE CLEAR REC A playlist can be deleted when becoming not needed. L Disc > Playlist Original Add New Title Delete Playlist 2 Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. Disc > Playlist 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 JAN/1 1:00AM 5 5 Press SETUP button to exit DISC menu. Add New Title Delete PlayList JAN/1 1:00AM 85 Editing TIMER PROG. DISPLAY OPEN/CLOSE E6500UD.QX 03.12.8 19:07 Page 86 Editing DVD-R POWER TIMER PROG. DISPLAY OPEN/CLOSE Deleting titles A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC PAUSE 3 You can delete titles which you do not need anymorer, however the disc space to record will not in crease. Be sure to know that the titles once deleted cannot be brought back to the disc. Select “Title Delete” using K / L buttons, then press ENTER button. Option window will appear. Disc > Edit 1 Title Delete Edit Title Name SKIP k H G 1 Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 B PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { B Select “Edit” from DISC menu using K / L buttons, then press ENTER button. Titlelist will appear. Screen: RETURN ZOOM Disc > Edit L 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 Select “Yes” using { / B buttons, then press ENTER button. Title will be deleted. Disc > Edit 4 5 1 JAN/1 1:00AM Title Delete Edit Title Name JAN/1 1:00AM Yes JAN/ 1 1:00AM CH12 2 Writing to Disc Select a desired title using K / L / { / B buttons, then press ENTER button. Edit menu will appear. Disc > Edit 1 JAN/ 1 1:00AM CH12 Title Delete Edit Title Name XP 0:01:25 86 No XP 5 Press SETUP button to exit DISC menu. E6500UD.QX 03.12.8 19:07 Page 87 Editing Putting names on titles POWER OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP ABC abc 123 @!? JAN/ 1 1:00AM CH12 XP 1 0 PAUSE SKIP k H G B PLAY REV FWD h g STOP Select “Edit” from DISC menu using K / L buttons, then press ENTER button. Titlelist will appear. Screen: C SETUP 1 0:01:25 REC MODE CLEAR REC Disc > Edit > Edit Title Name You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist. Editing TIMER PROG. DISPLAY Alphabet window will appear. MENU PLAY LIST TOP MENU/ ORIGINAL Disc > Edit K ENTER REPEAT { 1 1 2 3 JAN/1 1:00AM JAN/1 1:00AM JAN/1 1:00AM 4 Enter a title name using K / L / { / B buttons and number buttons, then press ENTER button. Refer to page xx for details. Option window will appear. B RETURN ZOOM 4 L 5 Disc > Edit > Edit Title Name 1 JAN/1 1:00AM JAN/1 1:00AM ABC abc 123 @!? Yes 2 No abc 0:01:25 Select a desired title using K / L / { / B buttons, then press ENTER button. Edit menu will appear. Disc > Edit 1 Title Delete Edit Title Name 5 Select “Yes” using { / B buttons, then press ENTER button. Disc > Edit > Edit Title Name 1 JAN/ 1 1:00AM CH12 XP 0:01:25 ABC abc 123 @!? Yes 3 Select “Edit Title Name” using K / L buttons, then press ENTER button. No abc Writing to Disc 6 Press SETUP button to exit DISC menu. 87 E6500UD.QX 03.12.8 19:07 Page 88 Using SETUP menu SETUP/DISC Menu Play Back Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language 4:3 Letter Box All English Original OFF Digital Out Setup Menu Dynamic Range Control ON Fast Forward with Audio OFF Page XX Page XX Page XX Page XX Page XX Page XX Page XX Recording Setup > Recording DVD-RW Recording Format SETUP menu Auto Chapter Video mode OFF Timer Programing Page XX Page XX Page XX Setup Display Setup > Display Playback Setting OSD Background Transparency 100% OSD Background Color OSD Language 1 English FL Dimmer Auto Screen Saver OFF Page XX Page XX Page XX Page XX Page XX Select Video Setup > Select Video L1 (Rear) Video In L2 (Front) Video In Page XX Page XX Clock Setup > Clock Auto Clock Setting OFF Daylight Saving Time ON Page XX Page XX Page XX Stereo Page XX Page XX Page XX Clock Setting Channel Preset Setup > Channel Preset Auto Preset Manual Preset TV Audio Select 88 E6500UD.QX 03.12.8 19:07 Page 89 Using SETUP menu POWER TIMER PROG. DISPLAY OPEN/CLOSE Other settings: Parental Lock A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 0 REC PAUSE SKIP k H G B PLAY REV FWD h g STOP Note: This feature may not be available to some discs. C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { B RETURN ZOOM L Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Using SETUP menu CM SKIP REC MODE CLEAR Some DVD-Video discs feature a Parental Lock level. If the DVD recorder is set to a lower level than the disc, it will require you to enter a password before the disc will play. This gives you some control about what your children watch on the DVD recorder. 1 Setting a parental lock level When you first change the parental lock level or after resetting the DVD recorder, there is no password set. When the password setting menu appears, enter a 4-digit number as your own password. “All” has been selected as the default. Note: You will find 2 kinds of icon in Parental Lock. : A password has been set already. : A password has not been set yet. Setup Menu 2 Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. Setup Playback Setting 3 Select “PlayBack” using K / L / { / B buttons, then press ENTER button. Play Back menu will appear. Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language 4:3 Letter Box All English Original OFF Digital Out Dynamic Range Control ON Fast Forward with Audio OFF 89 E6500UD.QX 03.12.8 19:07 Page 90 Using SETUP menu 4 POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 Select “Parental Lock” using K / L buttons, then press ENTER button. CH Setup > Play Back REC MONITOR 7 9 8 CM SKIP REC MODE CLEAR When you first change the parental lock level: Option window will appear. PAUSE H Setup > Play Back G TV Aspect Parental Lock Disc Menu Language B Audio Language PLAY REV FWD Subtitle Language h g Digital Out STOP Dynamic Range Control C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { B RETURN ZOOM L Parental Lock Disc Menu Language Audio Language 4:3 Letter Box 8 English Original OFF Digital Out SKIP k TV Aspect Subtitle Language 0 REC 3. Press ENTER button. Your own password has been changed and your setting will be activated. Fast Forward with Audio 4:3 All Letter Box 8 All 7 English 6 Original 5 OFF 4 3 2 ON 1 OFF 1. Change the parental level using K / L buttons, then press ENTER button. Option window will appear. Dynamic Range Control ON Fast Forward with Audio OFF When you already set your own password: Option window will appear. Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Setup > Play Back TV Aspect 4:3 All Letter Box Change 8 Password? Parental Lock All Yes No 7 English Disc Menu Language 6 Original Audio Language 5 OFF Subtitle Language 4 3 Digital Out 2 ON Dynamic Range Control 1 Fast Forward with Audio OFF 2. Select “Yes,” then enter a new password. Fast Forward with Audio 1. Change the parental level using K / L buttons, then press ENTER button. Option window will appear. Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio Digital Out 4:3 All Letter Box Password 8 All 7- - - English 6 Original 5 OFF 4 3 2 ON 1 OFF 4:3 All Letter Box 8 All 7 English 6 Original 5 OFF 4 3 2 ON 1 OFF Dynamic Range Control Fast Forward with Audio 4:3 All Letter Box Password 8 All 7- - - English 6 Original 5 OFF 4 3 2 ON 1 OFF 2. Enter your own password. Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio 90 4:3 All Letter Box Password 8 All 7* * * * English 6 Original 5 OFF 4 3 2 ON 1 OFF E6500UD.QX 03.12.8 19:07 Page 91 Using SETUP menu POWER TIMER PROG. DISPLAY OPEN/CLOSE 3. Press ENTER button. Option window will appear. A Setup > Play Back TV Aspect 1 4:3 All Letter Box Change 8 Password? All Yes No 7 English 6 Original Audio Language 5 OFF Subtitle Language 4 3 Digital Out 2 ON Dynamic Range Control 1 Fast Forward with Audio OFF 3 2 Parental Lock CH Disc Menu Language 4 5 7 8 6 REC MONITOR 9 0 REC PAUSE SKIP k H G B PLAY REV FWD h g Using SETUP menu CM SKIP REC MODE CLEAR 4. Select “Yes,” then enter a new password. When selecting “No,” the current password is still effective. STOP C SETUP Setup > Play Back MENU PLAY LIST TOP MENU/ ORIGINAL TV Aspect K Parental Lock Disc Menu Language ENTER REPEAT { Audio Language B Subtitle Language RETURN ZOOM Digital Out Dynamic Range Control L Fast Forward with Audio 4:3 All Letter Box Password 8 All 7- - - English 6 Original 5 OFF 4 3 2 ON 1 OFF 5. Press ENTER button. Your own password has been changed and your setting will be activated. Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language 4:3 Letter Box 8 English Original OFF Digital Out Dynamic Range Control ON Fast Forward with Audio OFF 5 Press SETUP button to exit SETUP menu. Note: Clearing Parental Lock setting When you forget the password or you want to clear all setting in Parental Lock, entering 4, 7, 3, and 7 as an alternate will be effective. 91 E6500UD.QX 03.12.8 19:07 Page 92 Using SETUP menu POWER TIMER PROG. DISPLAY OPEN/CLOSE Other settings: Language settings A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC Various languages may be available for the discs you play. You can choose the language you prefer for each. English has been selected as the default. All language settings are not always available with all discs. 3 Select “Playback” using K / L / { / B buttons, then press ENTER button. Play Back menu will appear. Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language PAUSE SKIP k H G B Subtitle Language Choosing the menu language 4:3 Letter Box All English Original OFF Digital Out Dynamic Range Control ON Fast Forward with Audio OFF PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL 1 4 K ENTER REPEAT { B RETURN ZOOM L Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Select “Disc Menu Language” using K / L buttons, then press ENTER button. Option window will appear. Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Setup Menu 4:3 Letter Box All English English French Original Spanish OFF Other Digital Out Dynamic Range Control ON Fast Forward with Audio OFF 2 Select SETUP using { / B navigation buttons, then press ENTER button. SETUP menu will appear. 5 Select a desired language using K / L buttons, then press ENTER button. Setup Playback Setting 92 When you want a language other than English, French, and Spanish: 1. Choose “Other,” then press ENTER button. The code input option will appear, so that you can select a language you want by entering the 4-digit code number using number buttons. Refer to the language code table on page xx. E6500UD.QX 03.12.8 19:07 Page 93 Using SETUP menu 3 Setup > Play Back POWER TIMER PROG. DISPLAY OPEN/CLOSE TV Aspect Subtitle Language 4:3 Letter Box All English English French Original Spanish OFF Other Digital Out Code Input Parental Lock A Disc Menu Language Audio Language 1 3 2 CH 4 5 6 7 8 9 Dynamic Range Control ---ON Fast Forward with Audio OFF Select “Playback” using K / L / { / B buttons, then press ENTER button. Play Back menu will appear. REC MONITOR Setup > Play Back 0 REC TV Aspect 6 Parental Lock Disc Menu Language Audio Language PAUSE SKIP k H Subtitle Language G Press SETUP button to exit SETUP menu. 4:3 Letter Box All English Using SETUP menu CM SKIP REC MODE CLEAR Original OFF Digital Out B Dynamic Range Control ON Fast Forward with Audio OFF PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K Choosing the audio language ENTER REPEAT { B RETURN ZOOM 1 L Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: 4 Select “Audio Language” using K / L buttons, then press ENTER button. Option window will appear. Setup > Play Back TV Aspect Digital Out 4:3 Letter Box All Original English English Original French OFF Spanish Other Dynamic Range Control ON Fast Forward with Audio OFF Parental Lock Disc Menu Language Audio Language Subtitle Language Setup Menu 2 Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. 5 Select a desired language using K / L buttons, then press ENTER button. When the language you have selected is included in the disc you are playing, the DVD recorder will play the disc in the specified language in this menu. Setup Note: This feature may not be available to some discs. Playback Setting 93 E6500UD.QX 03.12.8 19:07 Page 94 Using SETUP menu POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 CH REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G When you want a language other than those in the option: 1. Choose “Other,” then press ENTER button. The code input option will appear, so that you can select a language you want by entering the 4-digit code number using number buttons. Refer to the language code table on page xx. Choosing the subtitle language 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: B PLAY REV FWD h g Setup > Play Back STOP C SETUP Subtitle Language Digital Out ENTER { All Original English English Original French OFF Spanish Other Audio Language K REPEAT 4:3 Letter Box Parental Lock Disc Menu Language MENU PLAY LIST TOP MENU/ ORIGINAL TV Aspect Dynamic Range Control B Fast Forward with Audio Code Input ON ---OFF RETURN ZOOM Setup Menu 2 L 6 Press SETUP button to exit SETUP menu. Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. Setup Playback Setting 3 Select “Playback” using K / L / { / B buttons, then press ENTER button. Play Back menu will appear. Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language 4:3 Letter Box All English Original OFF Digital Out 94 Dynamic Range Control ON Fast Forward with Audio OFF E6500UD.QX 03.12.8 19:07 Page 95 Using SETUP menu 4 POWER TIMER PROG. DISPLAY A 1 2 3 4 5 6 7 8 9 CH TV Aspect Setup > Play Back TV Aspect Digital Out 4:3 Letter Box All OFF English English Original French OFF Spanish Other Dynamic Range Control ON Fast Forward with Audio OFF Parental Lock 0 Disc Menu Language Audio Language PAUSE SKIP k H Subtitle Language G B PLAY REV FWD Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio 4:3 Letter Box All OFF English English Original French OFF Spanish Other Code Input ON ---OFF Select “OFF” to switch subtitles off the screen. Note: You can change or switch off the subtitles on a DVD disc also from the disc menu if it is available. g h STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL 5 6 Select a desired language using K / L buttons, then press ENTER button. When the language you have selected is included in the disc you are playing, the DVD recorder will play the disc in the specified language in this menu. Press SETUP button to exit SETUP menu. K ENTER REPEAT { B RETURN ZOOM L Note: This feature may not be available to some discs. When you want a language other than those in the option: 1. Choose “Other,” then press ENTER button. The code input option will appear, so that you can select a language you want by entering the 4-digit code number using number buttons. Refer to the language code table on page xx. 95 Using SETUP menu CM SKIP REC MODE CLEAR Parental Lock Select “Subtitle Language” using K / L buttons, then press ENTER button. Option window will appear. REC MONITOR REC Setup > Play Back OPEN/CLOSE E6500UD.QX 03.12.8 19:07 Page 96 Using SETUP menu POWER TIMER PROG. DISPLAY OPEN/CLOSE Other settings: Audio settings A 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC PAUSE SKIP k H G B PLAY REV FWD h Setting digital audio output When you are connecting the DVD recorder to an amplifier/decoder, which is compatible with digital audio output, you will need to make the settings to enjoy the full surround sound. Dolby Digital has been selected as the default. 3 Select “Playback” using K / L / { / B buttons, then press ENTER button. Play Back menu will appear. Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language 4:3 Letter Box All English Original OFF Digital Out Dynamic Range Control ON Fast Forward with Audio OFF g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { B RETURN ZOOM L 1 4 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Select “Digital Out” using K / L buttons, then press ENTER button. Option window will appear. Setup > Play Back TV Aspect Disc Menu Language 4:3 Letter Box All English Audio Language Original Parental Lock Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio Setup Menu OFF PCM ON Dolby Digital OFF 2 5 Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. Select desired options using K / L buttons, then press ENTER button. Dolby Digital: Setup Setup > Play Back TV Aspect Disc Menu Language 4:3 Letter Box All English Audio Language Original Parental Lock Subtitle Language Digital Out Playback Setting Dynamic Range Control Fast Forward with Audio 96 OFF PCM ON Dolby Digital PCM Stream OFF E6500UD.QX 03.12.8 19:07 Page 97 Using SETUP menu POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH REC MONITOR 0 REC PAUSE SKIP k H G B 2. Select “Stream” using K / L buttons, then press ENTER button. Dolby Digital sound will be output. PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K ENTER REPEAT { B RETURN ZOOM L When your amplifier/decoder is NOT compatible with Dolby Digital: 1. Select “PCM” using K / L buttons, then press ENTER button. PCM sound will be output. 96kHz: 96kHz sound will be output, however no digital sound will be output when Copyguard function is on. 48kHz: Every sound will be output in 48kHz. When your amplifier/decoder is NOT compatible with 96kHz PCM: 1. Select “48kHz” using K / L buttons, then press ENTER button. 6 Press SETUP button to exit SETUP menu. Note: PCM sound will be output depending on your PCM setting. PCM: Setup > Play Back TV Aspect Disc Menu Language 4:3 Letter Box All English Audio Language Original Parental Lock Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio OFF PCM Auto 48kHz ON Dolby Digital 96kHz OFF When your amplifier/decoder is compatible with 96kHz PCM: 1. Select one among all options using K / L buttons, then press ENTER button. Auto: 96kHz sound will be output when a DVD copy guard function is off. 96kHz sound will be output in 48kHz when Copyguard function is on. 97 Using SETUP menu CM SKIP REC MODE CLEAR When your amplifier/decoder is compatible with Dolby Digital: 1. Select “Dolby Digital” using K / L buttons, then press ENTER button. E6500UD.QX 03.12.8 19:07 Page 98 Using SETUP menu POWER TIMER PROG. DISPLAY OPEN/CLOSE Compressing the range of sound volume A 1 1 2 3 4 5 6 7 8 9 CH REC MONITOR CM SKIP REC MODE CLEAR 0 REC Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: 4 Select “Dynamic Range Control” using K / L buttons, then press ENTER button. Option window will appear. Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language PAUSE SKIP k H Subtitle Language G 4:3 Letter Box All English Original OFF Digital Out B Dynamic Range Control ON Fast Forward with Audio OFF ON OFF PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL 5 Setup Menu K ENTER REPEAT { B RETURN ZOOM 2 L Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. Select “ON” or “OFF” using K / L buttons, then press ENTER button. On: The range of sound volume will be compressed. 6 Setup Press SETUP button to exit SETUP menu. Playback Setting 3 Select “Playback” using K / L / { / B buttons, then press ENTER button. Play Back menu will appear. Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language 4:3 Letter Box All English Original OFF Digital Out 98 Dynamic Range Control ON Fast Forward with Audio OFF E6500UD.QX 03.12.8 19:07 Page 99 Using SETUP menu POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 7 8 9 CH REC MONITOR 0 REC PAUSE SKIP k H 1 4 Select “Fast Forward with Audio” using K / L buttons, then press ENTER button. Option window will appear. Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language G 4:3 Letter Box All English Using SETUP menu CM SKIP REC MODE CLEAR Outputting the sound during play in fast forward Original OFF Digital Out Dynamic Range Control Fast Forward with Audio B ON ON OFF OFF PLAY REV FWD h g STOP C SETUP 5 MENU PLAY LIST TOP MENU/ ORIGINAL K Setup Menu ENTER REPEAT { B RETURN ZOOM L 2 Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. Select “ON” or “OFF” using K / L buttons, then press ENTER button. On: Sound will be output during play in fast forward of x2. 6 Press SETUP button to exit SETUP menu. Setup Playback Setting 3 Select “Playback” using K / L / { / B buttons, then press ENTER button. Play Back menu will appear. Setup > Play Back TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language 4:3 Letter Box All English Original OFF Digital Out Dynamic Range Control ON Fast Forward with Audio OFF 99 E6500UD.QX 03.12.8 19:07 Page 100 Using SETUP menu POWER TIMER PROG. DISPLAY OPEN/CLOSE Other settings: Display Select the below item using K / L buttons, then press ENTER button. A 1 2 3 4 5 6 7 8 4 1 CH REC MONITOR 9 CM SKIP REC MODE CLEAR 0 REC PAUSE Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: SKIP k H G OSD Background Transparency: You can setup the background transparency of OSD screen with your preference. Choose one among 0% through 100%. Default: 100% B PLAY REV FWD h Setup > Display g STOP 100% OSD Background Transparency 100% 85% OSD Background Color 1 70% OSD Language English 50% FL Dimmer Auto 35% Screen Saver OFF 25% 10% 0% C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL Setup Menu K ENTER REPEAT { B RETURN ZOOM L 2 Select SETUP using { / B buttons, then press ENTER button. SETUP menu will appear. 1. Select a desired transparency, then press ENTER button. Your setting will be activated. OSD Background Color: You can setup the OSD screen with your color preference. Choose one among 1 (Green), 2 (Blue), and 3 (Red). Default: 1 (Green) Setup Playback Setting Setup > Display OSD Background Transparency 100% 3 OSD Background Color Select “Display” using K / L / { / B buttons, then press ENTER button. Display menu will appear. Setup > Display OSD Background Transparency 100% OSD Background Color 100 FL Dimmer 11 2 English 3 Auto Screen Saver OFF OSD Language OSD Language 1 English FL Dimmer Auto Screen Saver OFF 1. Select a desired option(1: Green, 2: Blue, 3: Red), then press ENTER button. Your setting will be activated. E6500UD.QX 03.12.8 19:07 Page 101 Using SETUP menu POWER TIMER PROG. DISPLAY OPEN/CLOSE A 1 2 3 4 5 6 OSD Language: English, French, and Spanish are available for the OSD language. You can choose the language as your convenience. Default: English Screen Saver: You can set the screen saver to on or off. Then you can select the time to work the screen saver function on the screen. Default: OFF CH REC MONITOR 7 9 8 0 REC PAUSE Setup > Display OSD Background Transparency 100% OSD Background Transparency 100% OSD Background Color OSD Background Color FL Dimmer 1 English English Français Auto Español Screen Saver OFF Screen Saver OSD Language OSD Language FL Dimmer SKIP k H G 1 English OFF 5Auto minutes 10OFF minutes 15 minutes 30 minutes 60 minutes B PLAY REV FWD h g STOP C SETUP MENU PLAY LIST TOP MENU/ ORIGINAL K 1. Select a desired language, then press ENTER button. Your setting will be activated. 1. Select a desired option, then press ENTER button. Your setting will be activated. FL Dimmer: The brightness of front display can be changed as you prefer. “Auto,” “Bright,” and “Dark” are available. With “Auto” selected, the front display is dimmed brightly for approx. 15 secondes when the DVD recorder is operating, otherwise dimmed dark. Default: Auto 5 ENTER REPEAT { B RETURN ZOOM L Press SETUP button to exit SETUP menu. Setup > Display OSD Background Transparency 100% OSD Background Color OSD Language FL Dimmer Screen Saver 1 English Auto Auto Bright OFF Dark 1. Select a desired option, then press ENTER button. Your setting will be activated. 101 Using SETUP menu CM SKIP REC MODE CLEAR Setup > Display E6500UD.QX 03.12.8 19:07 Page 102 Others Troubleshooting Before requesting service for this DVD recorder, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Remedy Power The power does not turn on. • Check that the AC power cord is connected securely. There is no picture. • Re-connect the connecting cord securely. • The connecting cords are damaged. • The Setup Display appears. Press RETURN button to turn off the display. • Check the connection to your TV (page XX). • Switch the input selector on your TV (such as to "LINE1") so that the signal from the DVD recorder appears on the TV screen. Picture noise appears. • The disc is dirty or flawed. • If the picture output signal from the DVD recorder passes through your VCR to get to your TV, or if you are connected to a combination TV/VIDEO player, the copy-protection signal applied to some DVD programs could affect picture quality. If you still experience this problem even when you connect the DVD recorder directly to your TV, try connecting the DVD recorder to your TV's S-VIDEO input. TV program reception does not fill the screen. • Try to set the channels with "Auto Preset" in SETUP menu (page XX). • Select a channel of any TV program using the CH o / p buttons. • Reorient the TV antenna. • Adjust the picture (see the TV's intruction manual). • Place the DVD recorder and TV farther apart. • Place the TV and any bunched antenna cables farther apart. • Switch the input to TV. • Connect the antenna cable correctly (page XX). Picture TV program pictures are distorted. TV channels cannot be changed. The playback picture or TV program from the equipment connected through the DVD recorder is distorted. • If the playback picture output from a DVD player,VCR, or tuner goes through the DVD recorder before reaching your TV, the copy-protection signal applied to some programs could affect picture quality. Disconnect the playback equipment in question and connect it directly to your TV. There is no sound. • The disc is dirty or flawed. • Re-connect all connections securely. • The connecting cord is damaged. • Check the connections to the amplifire input. • The input source setting on the amplifier is incorrect. • The recorder is in pause mode or in Slow-motion Play mode. • The recorder is in fast forward or fast revers mode. • If the audio signal does not come through the DIGITAL OUT (COAXIAL) jack, check the Audio Setup settings (page XX). Sound is noisy. • The disc is dirty or flawed. • When playing a CD with DTS sound tracks without DTS decoder, noise will come from the speakers. Sound 102 E6500UD.QX 03.12.8 19:07 Page 103 Others Symptom Playback The disc does not play. Remedy • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The DVD recorder cannot play certain discs (such as a CDROM) (page XX). • The region code on the DVD VIDEO does not match the DVD recorder (page XX). • Moisture has condensed inside the DVD recorer. Remove the disc and leave the DVD recorder turned on for about half an hour until the moisture avaporates (page XX). • If the disc was recorded on another recorder, the DVD recorder cannot play the disc if it was not finalized (page XX). • Resume play was activated (page XX). Press STOP C button twice. • You have inserted a disc whose Title menu or DVD menu The DVD recorder starts playing from the disc automatically. • The DVD VIDEO features an auto playback function. Some functions such as Stop, Search, or Slow-motion Play cannot be performed. • Depending on the disc, you may not be able to do some of the operations above. See the instruction manual supplied with the disc. • Multilingual tracks are not recorded on the DVD VIDEO, DVD-R or DVD-RW being played. • The DVD VIDEO prohibits the changing of the language for the sound track. • Try changing the language using the DVD VIDEO's menu. The language for the sound track cannot be changed. The subtitle langusge cannot be changed or turned off. • Multilingual subtitle are not recorded on the DVD VIDEO. • The DVD VIDEO prohibits changing of the subtitles. • Try changing the subtitle using the DVD VIDEO's menu. The angles cannot be changed. • Multi-angles are not recorded on the DVD VIDEO being played. • You are trying to change the angles when "ANGLE" does not appear on the TV screen (page XX). • The DVD VIDEO prohibits changing angles. • Try changing the angle using the DVD VIDEO's menu. Recording/Timer recording/Editing The channel cannot be changed from the channel you are recording. Recording does not start immediately after you press REC button. Nothing was recorded even though you set the timer setting correctly. Recording does not stop immediately after you press STOP C button. Timer recording is not complete or did not start from the beginning. • Set the TV's input to "TV." • An unused DVD-R or DVD-RW was inserted. It takes a while for the DVD recorder to automatically format a DVD-RW. •There was a power failure during recording. • The DVD recorder's internal clock stopped due to a power failure that lasted for more than 30 sec. Reset the clock (page XX). • Disconnect the AC power cord from the AC outlet, and connect it again. • The program contains copy protection signals that restricts copying. • The timer setting overlapped with another setting that was set later or has priority. • It will take a few seconds for the DVD recorder to inout disc data before recording can stop. • The timer setting overlapped with another setting that was set later or has priority (page XX). • Disc space was not enough. 103 Others The disc does not start playback from the beginning. E6500UD.QX 03.12.8 19:07 Page 104 Others Symptom Remedy Remote control The remote does not function. • Batteries are weak. • There are obstacles between the remote and the DVD recorder. • The remote is too far from the DVD recorder. • There are no batteries in the remote. • Turn on the DVD recorder. •The remote is not pointed at the remote senser on the DVD recorder. Others The DVD recorder does not operate properly. • When static electricity, etc., causes the DVD recorder to operate abnormally, unplug the DVD recorder and then plug it in again. The disc tray does not open when you press OPEN/CLOSE A button. • It may take a few seconds for the disc tray to open after you have recorded or edited a disc. • This is because the DVD recorder is adding disc data to the disc. Quick Guide to DVD disc types Refer to the following when selecting a disc (DVD-RW or DVD-R) and a recording format (VR mode or Video mode for DVD-RW discs). : Most suitable. : Can be used. : Some functions are limited. DVD-RW Video DVD-R DVD-RW VR DVD-RW Video DVD-R Rewritable? Yes Yes No Can create chapters at fixed intervals (auto.) Yes Yes Yes Can create chapters wherever you like (manual) Yes No No Can record 16:9 size pictures Yes Yes Yes Can record Copy-Once programs Yes No No Can perform basic edit functions Yes Yes No Can perform advanced edit functions (Playlist edit) Yes No No You want to DVD-RW VR : Cannot be used. Record TV programs Reuse by deleting unwanted contents Edit recorded contents Edit/Record from connected equipment Copy discs for distribution *1 Play on other DVD equipment *1 Features Recording Editing *1 104 DVD-RW (VR mode) can only be played on DVD equipment that is VR compatible. Note: For details of the above functions and implied restrictions, see the explanations inside the manual. E6500UD.QX 03.12.8 19:07 Page 105 Others Language code Code 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 5759 4947 7254 4961 5464 4965 5047 6058 5160 5161 5166 5261 5256 5255 5264 5271 5358 5747 5051 5158 5758 5360 5367 5447 5569 5455 Language Hungarian Icelandic Indonesian Interlingua Interlingue Inupiak Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kinyarwanda Kirghiz Kirundi Korean Kurdish Laothian Latin Latvian; Lettish Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Occitan Oriya (Afan) Oromo Panjabi Pashto; Pushto Persian Polish Portuguese Quechua Rhaeto-Romance Romanian Code 5467 5565 5560 5547 5551 5557 5347 5566 5647 5669 5760 5765 5757 6469 5771 6460 5761 5767 5861 5847 5868 5860 5866 5957 5953 5965 5958 5966 5955 5964 5961 5960 6047 6051 6061 6149 6164 6159 6247 6265 5247 6258 6266 6367 6459 6461 Language Russian Samoan Sangho Sanskrit Scots Gaelic Serbian Serbo-Croatian Sesotho Setswana Shona Sindhi Singhalese Siswat Slovak Slovenian Somali Spanish Sundanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Tsonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 6467 6559 6553 6547 5350 6564 6554 6566 6660 6560 6550 6555 6565 6557 6558 6561 5165 6567 6569 6568 6658 6653 6647 6666 6651 6654 4861 6655 6661 6665 6664 6657 6669 6757 6764 6772 6855 6861 4971 6961 7054 5655 7161 7267 105 Others Language Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi E6500UD.QX 03.12.8 19:07 Page 106 Others Notes about discs • To keep the disc clean, handle the disc by its edge. Do not touch the surface. Dust, fingerprints, or scratches on the disc may cause it to malfunction. • Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car. • After playing, store the disc in its case. • Clean the disc with a cleaning cloth. Wipe the disc from the center out. 106 • Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl LPs. • Do not use teh following discs. –A disc that has a non-standard shape (e.g., card, heart). –A disc with a label or sticker on it. –A disc that has celophane tape or sticker adhesive on it. E6500UD.QX 03.12.8 19:07 Page 107 Others Glossary Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as it is high). Digital audio An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44, 100 times a second for CD audio) by an analog-to-digital converter, generating a stream of numbers. On playback, a digital-to-analog converter generates an analog signal based on these numbers. See also Sampling frequency and Analog audio. Regions code Regions associate discs and players with particular areas of the world. This unit will only play discs that have compatible region codes. You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions). Others Chapter Just as a book is split up into several chapters, a title on a DVD disc is usually divided into chapters. See also Title. PCM (Pulse Code Modulation) The most common system of encoding digital audio, found on CDs and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. See also Digital audio. Title (DVD only) A collection of chapters on DVD disc. See also chapter. Track Audio CDs and Video CDs use tracks to divide up the content of a disc. The DVD equivalent is called a chapter. See also Chapter. Dolby Digital With multichannel audio, this high quality surround system is used in many movie theaters around the world. 107 E6500UD.QX 03.12.8 19:07 Page 108 LIMITED WARRANTY FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase. LIMITS AND EXCLUSIONS: This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required together with the product to obtain service under this warranty. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any product not purchased and used in the United States. This product is produced for home use and this warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God. THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY. IMPORTANT: THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP. ATTENTION: FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE. To locate your nearest SYLVANIA Authorized Service Center or for general service procedure, please call 1-800-968-3429 or write to the following: FUNAI CORPORATION, INC. SERVICE CENTER 19900 Van Ness Avenue, Torrance, CA 90501 Tel :1-800-968-3429 http://www.funai-corp.com Head Office: 100 North Street, Teterboro, NJ 07608 PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS. Printed in China 0VMN03892 / E6500UD ★★★★★