Download Hearth and Home Technologies 830-0381 Indoor Fireplace User Manual
Transcript
Drill/Drivers DS14DVF3 14.4v 10mm Cordless Driver Drill DS14DMR(HS) 14.4v 10mm Cordless Driver Drill - 10mm keyless chuck - 22-stage adjustable clutch for precise torque settings - Maximum torque of 34Nm - Soft grip, slip resistant handle - Comes with torch, bit set and 2 x 1.4Ah batteries - Powerful 50Nm of Torque 13mm Keyless chuck 22-stage torque adjustment Comfortable non-slip grip handle New Super Ni-MH battery DS18DVF3 18v 13mm Cordless Driver Drill NEW SUPER NI-MH BATTERY - 13mm keyless chuck - 22-stage adjustable clutch for precise torque setting - Maximum torque of 45Nm - Soft grip, slip resistant handle - Comes with torch, bit set and 2 x 1.4Ah batteries MORE POWER. MORE LIFE. DS18DVB2 18v 13mm Cordless Driver Drill DS18DMR(HS) 13mm Cordless Driver Drill - Two speed, variable speed reverse - Electronic feedback power control - 22-stage torque adjustment - 13mm keyless chuck - High 45Nm torque - Electric brake - Soft grip handle & belt hook - 2 x 2.0Ah batteries - 2-speed, variable speed reverse - 13mm keyless chuck - 22-stage torque adjustment - Automatic spindle lock & single sleeve chuck for quick bit setting - Powerful fan cooled motor - High Power 65Nm torque - New Super Ni-MH batteries (available in 2 & 3 battery option) Impact Hammer Drill/Drivers DV14DMR(HS) 14.4v Cordless Impact Driver Drill DV18DMR(HS) 18v Cordless Impact Driver Drill - 22 position torque adjustable clutch - Powerful 52Nm of Torque - 3 mode selection: Drill, impact drill,driver - 13mm keyless chuck - Improved cooling efficiency - Soft grip handle - New Super Ni-MH battery - 22 position torque adjustable clutch - Powerful 62Nm of Torque - 3 mode selection: Drill, impact drill,driver - 13mm keyless chuck - Improved cooling efficiency - Soft grip handle - New Super Ni-MH battery (available in 2 & 3 battery option) Impact Drivers/Wrenches WH12DMR(HH) Cordless Impact Driver WH14DMR(HS) 14.4v Cordless Impact Driver - - High durability, dust resistant for long life - Variable speed in trigger also with reverse switch - Double moulded non-slip grip handle - Powerful 140Nm of torque - 1/4” hex drive - Angle adjustable hook with light - New Super Ni-MH battery Powerful tightening torque of 130Nm Compact & lightweight body Powerful cooling fan for high-motor durability Light equipped 5 step angle adjustable hook - Replaceable carbon brushes - Soft grip, slip resistant handle - 1/4” Hex drive NEW HITACHI SUPER Ni-MH BATTERIES Now Available on all 14.4v & 18v MODELS SUPER Ni-MH 5% More Torque 50% More Life WR14DMR(HS) 14.4v Cordless Impact Driver - High durability, dust resistant for long life - Variable speed in trigger also with reverse switch - Double moulded non-slip grip handle - Powerful 200Nm of torque - 1/2” hex drive - Angle adjustable hook with light - New Super Ni-MH battery “Out Perform - Out Last” Impact Drivers / Wrenches WH18DMR(HS) 18v Cordless Impact Driver - Powerful tightening torque of 157Nm - Compact & lightweight body - Variable speed trigger with reverse switch - Powerful cooling fan for high-motor durability - Light equipped 5 step angle adjustable hook - Soft grip, slip resistant handle - New Super Ni-MH battery (available in 2 & 3 battery option) WR18DMR(HS) 18v Cordless Impact Wrench - Powerful tightening torque of 231Nm - Compact & lightweight body - Variable speed trigger with reverse switch - Powerful cooling fan for high-motor durability - Light equipped 5 step angle adjustable hook - Soft grip, slip resistant handle - New Super Ni-MH battery (available in 2 & 3 battery option) Sabre Saws / Screwdrivers WF4DYB 12v Cordless Auto Feed Impact Driver - Removable auto-feed attachment - Powerful impact 90Nm of torque - Variable speed reverse CR18DMR(HC) 18v Cordless Reciprocating Saw - Slip-resistant soft grip handle - Two-finger sized trigger switch - Flat type battery making it easier to get into tight spaces - High output of 380W - Longest cutting stroke in category - Tough Die-Cast aluminium casing Combo Kits KC18DMR(HB) 18v Cordless Combo Kit - DV18DMR -18v Cordless Impact Hammer Driver Drill - CR18DMR 18v Cordless Reciprocating Saw - C18DMR 18v Cordless Circular Saw - UB18DL 18v Lantern & Charger - 2 Super Ni-MH Batteries (Also available in 3 battery option) HITACHI SUPER Ni-MH 5% More Torque 50% More Life “Out Perform - Out Last” Drills D13 13mm High Torque Drill - Adjustable handles for comfortable grip - Built for high torque applications - Powerful 720 watt motor - Triple reduction gearing - Keyed chuck - Reversible D13VF 13mm Variable Speed Drill - Industrial grade 710 watt motor - Heavy duty alloy gear casting - Variable speed reverse - Electric brake - Keyed chuck DMT16 16mm High Torque Drill - Mechanical two speed gear selector - Industrial grade 16mm keyed chuck - “D” handle for comfortable grip - Powerful 900 watt motor DC120VA 120mm Diamond Core Drill - Electronic soft start & constant speed control - Massively powerful 1,400 watt motor - Synchronised dual variable speed - High 120mm capacity in concrete - Safety release clutch - Robust 16mm chuck Impact Drills DV18V 18mm Impact Drill - Compact & lightweight - Soft grip handle for increased comfort - Powerful 690 watt motor - Durable aluminium gear cover and inner cover - 2-speed, variable - Push button type forward-reverse change over switch DV20VB2 20mm Impact Drill - Synchronised gear sift mechanism - Easy to use mode switching - Easy to handle large trigger - Variable speed and reverse - Powerful 790 watt motor “Out Perform - Out Last” Impact Wrench WR16SA 12.7mm Impact Wrench WR22SA Impact Wrench - Powerful 480 watt motor with maximum torque of 360Nm - Compact & lightweight - Slip resistant and comfortable soft grip handle - Higher durability thanks to metallic bearing bushing - Powerful 850 watt motor with maximum torque of 610Nm - Compact & lightweight - Slip resistant and comfortable soft grip handle - Durable double-insulated motor thanks to the highly strong (rigid) aluminium die-cast body Rotary Hammer Drills DH24PB3 24mm Rotary Hammer DH24PC3 24mm Rotary Hammer - Powerful 800 watt motor with top class drilling speed - Forward/Reverse changeover switch - Idle hammering prevention mechanism - Slip resistant, double layer moulded gear cover and handle - 2 mode action: hammer drilling & drilling only - Powerful 800 watt motor with top class drilling speed - Forward/Reverse changeover switch - Idle hammering prevention mechanism - Slip resistant, double layer moulded gear cover and handle - 3 mode action: hammer drilling & drilling only & Hammer only DH40MR 40mm Rotary Hammer Drill DH45MR 45mm Rotary Hammer - Two mode action; Hammer drilling, hammer only - Lightweight & powerful - Soft touch grip for comfort & control - Powerful 10 joules per strike rate - Powerful industrial 950 watt motor - Easy adjustable front & side handle - SDS-max drive - Variable speed control with impact rate of 1200-2500bpm - Needle-pin type slip clutch - Internal double-insulation construction - High drilling speed & high demolition performance - Change lever for switching between,“Rotary + Hammering”, “Neutral” & “Hammering only” - Soft-touch grip handle and side handle for easier handling Demolition Hammers H60MRV Demolition Hammer H65SB2 Demolition Hammer - - Strongest demolition power and durability in this class - Low noise and vibration level - Triple dust sealed, double insulated design - Comfortable shock absorbing handles - Robust construction for longer life - High impact energy: 42 joules - Strong alloy motor housing Powerful 1,350 watt motor Slip resistant soft grip handle Constant/Variable speed control Fast full load stricking rate of 1,650bpm Vibration-absorbing handle for excellent vibration reduction High chipping and demolishing performance with low vibration and low noise level - Internal double-insulation construction with sturdy aluminium frame Grinders G10SD2 100mm Angle Grinder G12SE2 115mm Angle Grinder - Powerful 760 watt motor - High power to weight ratio - Advanced seal technology - Ergonomic 15O side handle - Compact, lightweight & modern - Low profile gearbox allows access to restricted areas - Spindle lock for easy to replace grinding wheel - Wear resistant of armature coil - Excellent overload durability - Powerful 1,200 watt motor - Compact and lightweight G13SE2 125mm Angle Grinder G18SE3 180mm Angle Grinder - Spindle lock for easy to replace grinding wheel - Wear resistance of armature coil - Excellent overload durability - Powerful 1,200 watt motor - Compact and lightweight - Dust proof ball bearing portion & durable retainer - New construction to protect grease leakage - Tool-less angle adjustment of wheel guard - Spindle lock 3-position side handle - Prolonged service life and wear resistant - Powerful 2,400 watt motor “Out Perform - Out Last” Grinders G23SE2(H6) 230mm Angle Grinder G23UB2 230 Angle Grinder - Dust-proof ball bearing - Tool-less wheel guard can be adjusted to any angle - Long life carbon brushes - More durable ball bearing retainer - Wear resistance of armature coil - Powerful 2,400 watt motor - Carry case - Powerful 2,400 watt motor - Three position side handle - Easy to use large safety lock switch - Tool-less angle adjustment of wheel guard - Soft start for minimised kick back reaction - Dust proof ball bearing portion & durable retainer - New construction to protect from grease leakage Sander / Polisher & Grinder SAT180 180mm Sander / Polisher GP2 25mm Die Grinder - Powerful 950 watt motor - No-load speed range: 1900-3400rpm - Robust construction for longer life - Two-speed dust sealed switch - Dust resistant design - Compact design for easy access to hard to reach locations - High speed for a smooth and accurate finish - High power from a 520 watt industrial motor - Convenient tool rest Sanders SV12SG Orbital Palm Sander SB10T 100 x 610mm Belt Sander - Soft grip for ease of operation & reduce operator fatigue - Sanding rate best in class - Easily accessible switch suits left or right hand operation - Easy and quick paper changing with convenient lever clamp - Also compatible with velcro backed sand paper - 2-speed for rapid stock removal & fine finish sanding - Large belt size for rapid sanding and stock removal - Powerful industrial grade 1,100 watt motor - Extended base suitable for flush sanding SB75 Belt Sander SV13YA(H1) 125mm Orbital Sander - 2-speed for rapid stock removal & fine finish sanding - Efficient dust collection with a large dust bag - Powerful industrial grade 1,000 watt motor - Extended base suitable for flush sanding - Powerful 230 watt motor Variable speed 7,000-12,000rpm Ergonomic design Large soft grip handle Pad control system Complete ball bearing construction for smooth operation Circular Saws C5YC Dustless Metal Cutting Circular Saw C7YA(FCB) 185mm Dustless Saw - Lightweight and compact - Multi-purpose cutter - Fast and powerful - Clear view of cutting line - Robust and accurate (Comes with 125mm FCB Blade or Diamond Blade) - Convenient dustless operation for user safety when used with appropriate accessories - Lightweight & well-balanced for user comfort - Specifically built for cutting fibre-cement - 4-tooth, diamond tipped fibre-cement blade - Heavy duty industrial grade 1,400 watt motor C7SB2 185mm Circular Saw C9 235mm Circular Saw - Easy access adjustment lever with 55O bevel capacity - Magnesium gear cover, blade cover and lower guard - Soft and comfortable with slip resist ant moulded grip - Heavy duty die cast aluminium base - Powerful 1,710 watt motor - No saw slump, ideal for saw bench accessories - Powerful industrial 2,000 watt motor - Max depth of cut:86mm (3-3/8”) - Clear view of cutting line - Compact and easy to use - Rigid nickel alloy base “Out Perform - Out Last” Sabre Saws CR13VA 130mm Reciprocating Saw - Simple, tool-less, one handed blade changes - Comfortable, ergonomic soft moulded grip - Top of class 1,050 watt industrial motor - Higher cutting speed with swing action - Push button adjustable shoe - Variable speed control CR13VC 130mm Reciprocating Saw - Speed selection dial for versatile operation - Comfortable dual moulded front cover - Comfortable rubber moulded handle - Tool-less blade change mechanism - Large variable speed trigger - Powerful 1,010 watt motor Mitre Saws C10FCE 255mm Compound Mitre Saw - Intense power for toughest cutting jobs - Horizontal handle with soft, vibration reducing elastomaster grip adds comfort & control - Thumb actuated positive stops, easy to use for quick mitre adjustments - Carbon brush access, allows user to replace brush as needed to greatly prolong tool life C12LCH 305mm Compound Mitre Saw - Laser guide system for easy adjustment - Digital display panel that indicates mitre and bevel angles - Bevel angle fine adjustment mechanism - Soft vibration reducing grip - Powerful 1950 Watt motor Slide Compound Saws C12FSA(B) 305mm Slide Compound MItre Saw - Built-in soft start & electric constant speed control - Dual slide rails for smooth & accurate cutting - Quiet, low vibration belt drive - Powerful 1,650 watt motor - Bevel left and right - Mitre angles R:0-57O L:0-57O C10FSB 262mm Slide Compound Mitre Saw - Built-in soft start & electronic constant speed control - Positive angle stoppers for desired angle cut - Poly V-belt and motor driving system for longer life - Splinter guard, also serving for cut alignment - Easy to read angle scale and bevel scale - Powerful 1,450 watt motor Cut Off Machines CC14SF 14” Cut Off Machine - Powerful 2400 watt motor - Soft grip handle - Spindle lock system - One touch vise system for quick feeding and easy tightening - High speed feeding of the vise CC16SA 405mm Cut Off Machine - Adjustable angle vice cutting up to 45O - Wind up vise with thread protection - Large capacity: 120mm pipe - Double reinforced base - 2,400 watt motor Planners P20SB(TCT) 82mm Finishing Planer - Comes with TCT blades - Highest power to weight ration in its class - Maximum pass of 1mm - 620 watt motor - 2.5kg weight P20SA2 82mm Rebate Planer - Large capacity rebate of 25mm depth - Lightweight design for user control - TCT replaceable blades - Comfortable “D” handle - 3mm maximum pass - Rigid alloy base Screwdrivers W6V4 Screwdriver - High power 620 watt motor - Ergonomic design for better operation - Robust aluminium cover & inner cover - Class-top low noise 76db W6VA4 Screwdriver - High power 620 watt motor - Ergonomic design for better operation - Robust aluminium cover & inner cover - Class-top low noise 76db “Out Perform - Out Last” Screwdriver Vacuum cleaner W8VB2 Screwdriver RP30Y Vacuum - High power 620 watt motor - Ergonomic design for better operation - Robust aluminium cover & inner cover - Class-top low noise 76db - Automatic switch outlet for ease of use - Suitable for wet & dry operation - Durable stainless steel casing - Heavy duty 1,200 watt motor - Integrated accessory stands Nibbler Shear CN16SA Nibbler CE16SA Shear - Fast efficient cutting sped of 1,500 strokes per minute - Downward punching allows clear view of line - Powerful 480 watt motor - Adjustable cutting positions for cutting left or right - Large cutting capacity: 1.6mm steel, 1.2mm stainless - Large guard for protection from sharp metal waste - Fast efficient cutting speed of 3,700 strokes per minute - Compact body and lightweight - Powerful 400 watt motor - Large cutting capacity: 1.6mm steel, 1.2mm stainless Others RB40VA Blower VB16Y 16mm Rebar Cutter / Bender - - Micro-processor controls secures and stabilises the bending angle of the steel rod - Built-in slip clutch for protection of the mechanism - Preset dial for bending angles: 45O, 90O, 135O & 180O - Soft touch handle for comfort and control - Bending capacity: 10-16mm / Cutting capacity: 10-16mm Compact and lightweight Soft grip handle for easier handling Variable speed control trigger switch Stable floorstanding operation is possible Dust can be collected when using dust bag Number one in it’s class with maximum air volume:3.83/min EC12 Air Compressor (Twin Tank) EC10SB(SL) Air Compressor (oil-less) - - Small,l compact & portable Low maintenance 15.1 Litre tank capacity Rubber suction pads for stability in transport - Supplied with Nitto Coupling Oil-free compressor Small, compact & portable Low maintenance 15.1 Litre tank capacity Powerful motor with a 2HP single phase 240v motor - Grab handle is easy to carry for mobility - Supplied with Nitto Couping Pneumatics NR90AD 90mm D Head Strip Nailer NT65MA2 DA Series Brad Nailer - Revolutionary Lightweight & compact design - Well balanced clip head nailer - Rear load magazine with by pass follower - Tool-less depth adjustment - Dual function trigger (bump/single shot) - Moulded rubber grip for comfortable handling - Revolutionary on board air duster - 360 degree adjustable exhaust - Lightweight and high power - Tool-less depth adjustment - Dual function trigger - Quick clear feature NV65AF3 Coil Nailer - Light, compact and powerful Wire or plastic collated nails Sequential or contact fire Dial depth adjustment Clear view magazine with adjustable nail support - Non-slip grip handle “Ensure Optimum Performance” “Use HITACHI Designed Collated Fastener” FULL RANGE OF NAILS ALSO AVAILABLE “Out Perform - Out Last” 3612 12.7mm Plunge Router 6408 10mm Electric Drill • A tough, powerful and robust router • Handles anything from MDF to red gum and iron bark • Shaft lock for easy bit changes • 3-way preset plunge depth stop • Low noise (84db) 3706 Cutout Tool • Lightweight and powerful this drill is a must for carpenter/joiners, shop fitters and cabinet makers • Variable speed with forward/ reverse for easy drilling and driving applications • Heavy duty 10mm keyless chuck • Compact design for working in confined areas 6501 6.5mm High Speed Electric Drill • Designed to help you cut quick, accurate and smooth curves or holes • Fits in the palm of your hand giving you comfortable accurate control • Tool-less depth adjustment sets the desired cutting depth quickly and easily • Clean cuts with optional extraction head 3901 Plate Joiner • Fast rpm (4,500) makes this ideal for drilling pop rivets and pilot holes in metal channel • Adjustable depth guide allows you to drill to a predetermined depth • All ball and needle bearing construction for longer tool life • Compact pistol grip design 6821 Drywall Screwdriver • 6 depth settings for #0, #10, #20 biscuits • A professional joiner with precision grooving, flat dowel joints and wall/ ceiling capabilities • The base is set up to work with 19mm material without adjustment • Optional 110mm 24t blade will give you 25mm depth of cut 4131 185mm Cold Metal Cutting Saw • ”Sure-Lock” adjustment for consistent screw depth setting • Low noise level for quieter operation • Nose piece is easy to remove for reversing screws out • Highest power-to-weight ratio on the market • Large recessed lock-on button for continuous operation also helps prevent accidental lock-on 6825 Drywall Screwdriver • Fast, effortless cutting through metal with burr-free cuts that are cool to touch • Virtually spark free cuts • Cuts up to 6mm thick mild steel • Quick release blade guard lever for plunge cutting • Stainless steel base plate for stability and durability • Excellent for roof and fence sheeting 446L Dust Extraction System • The fastest drywall driver on the market at 6,000rpm • ”Sure-Lock” adjustment for consistent screw depth setting • Lightweight design (1.4kg) reduces operator fatigue during extended use • Large recessed lock-on button for continuous operation also helps prevent accidental lock-on 6826 Screwdriver • 27 litre tank • New “Push & Go” filter cleaning system • Dual purpose machine easily converts from dust extraction to a powerful wet or dry industrial vacuum cleaner • Automatic on/off system operates simultaneously as connected tool is switched on 447L Dust Extraction System • State of the art in general fixing applications with silent clutch for speed and torque • ”Sure-Lock” adjustment for consistent screw depth setting • Variable speed • Large recessed lock-on button for continuous operation also helps prevent accidental lock-on 6827 Screwdriver • 46 litre tank • New “Extreme Clean” automatic filter cleaning system • Dual purpose machine easily converts from dust extraction to a powerful wet or dry vacuum cleaner • Automatic on/off system operates simultaneously as connected tool is switched on Page 28 United Tools National Catalogue 2006 • 6 stage externally adjustable torque sensitive clutch mechanism • ”Sure-Lock” depth adjustment for consistent screw depth setting • Lightweight cast aluminium gear housing for durability • Retractable belt clip • Conveniently located forward/reverse switch 6952 Impact Screwdriver 3612C 12mm Electronic Plunge Router • This impact screwdriver delivers 120 Nm of torque • Rev speed of 3,200rpm means increased work efficiency • Lightweight cast aluminium gear housing for durability 2414NB-2 355mm Portable Cut Off • Dial up variable speed • Soft start feature for smoother start ups and electronic brake • Electronic speed control maintains constant speed even under load • Optional dust extraction assembly 3620 8mm Plunge Router • Lock off button to prevent accidental starting • Guide plate adjusts 45° right and left at 3 locations for various sizes of materials • Quick release vise for secure stock retention and fast repeated cut offs • Adjustable depth stop • Includes 5 abrasive discs and cap 2704 Table Saw • Great router for all round performance, plunging and template work • Comfortable grips with the switch built in for precise and accurate control • 1,000 Watt motor gives this machine plenty of power • 3 way preset plunge depths • Easy guide adjustment setup 3707F 6.35mm Trimmer • Machined saw table with high rigidity delivers accurate cutting work • Powerful motor enables ripping 4 x 8” wood with telescopic sub-table • Rip fence with very smooth sliding movement with anti-lifting T shaped rail • Side and rear extension tables available as option AF633 Pneumatic Brad Nailer • Ergonomic slim body design for superior handling and reduced operator fatigue • Rubber roller for easy and precise depth adjustment and cam action locking • Built-in Maklite for easy trimming when lighting is inadequate! 4101RH 110mm Wet Cutter • Durable and lightweight die cast housing • Easy tail loading of nails and easy dial depth adjustment • Comfortable rubber grip • Large magazine capacity - 120 pcs • Available in collation 34° AN611 Coil Nailer • Perfect saw for cutting tiles, bricks and concrete • Powerful and durable motor for longer life • Equipped with earth leakage breaker • Special cover design prevents water from entering into motor housing • Cutting capacity up to 34mm with standard 110mm blade 4107RH 180mm Wet Cutter • 3 way firing switch; safety lock, bounce fire and standard single fire • Tool-less fine depth adjustment for recessing heads or raised • 360° rotational exhaust port to deflect air away from operator • Spiked nose cone firmly grips material while skew or toe nailing • Accepts plastic and wire collated nails AN942 Pneumatic Framing Nailer • Wet cutting capability and a powerful 1,400W motor allows quick and clean cutting of stone, concrete and asphalt • Waterproof construction • Equipped with earth leakage breaker 4112 305mm Portable Angle Cutter • 3 way firing switch; safety lock, bounce fire and standard single fire • Tool-less fine depth adjustment for recessing heads or raised • 360° rotational exhaust port to deflect air away from operator • Spiked nose cone firmly grips material while skew or toe nailing • Accepts plastic and wire collated nails United Tools National Catalogue 2006 • SJS mechanism delivers outstanding performance and durability • Detachable and adjustable solid metal base plate ideal for cutting 100mm in depth • Large dead man switch for safer operation and less fatigue • Dust exhaust shute • Tool-less adjustable wheel guard Page 29 The future is now. Battery-powered tool technology has come a long way in the last few years – and Makita Mobile is definitely the future. Now, mobile tools can develop tons of power, run for longer and recharge in less time. There’s also more choice. With the Makita Mobile range of technology and voltage platforms, you can pick the perfect balance of tool power, size and weight to suit your work. Option 1. The Skins Option 2. The Kit Option 3. The Combo If you’re well set up with a particular Makita Mobile voltage platform, you may own enough batteries and chargers already. And that’s when you have the option to just grab a Skin. It’s just your new tool. So you can save because you’re not paying for more batteries and another charger. You’re on familiar ground here… Each kit gives you a new tool, packaged up with batteries and a charger in a self-contained set. When you want more power, Combos are the ideal shortcut. You can grab all the essential tools for your new mobile voltage, boxed (or bagged) up with batteries and a charger. You save because you’re not buying all the tools individually, and you’re not paying for more batteries and chargers than you really need. 6260DWLE 9.6V 10mm Mobile Driver Drill 8414DWAE 12V 13mm Hammer Driver Drill • Perfect for fitting door furniture, kitchen cupboard work, joinery and general fitout jobs • 2 speed gear box let’s you choose between speed and power • 16 torque settings for precise screw depth setting, prevents driving of screws deeper than surface • Includes 2 x batteries, case and torch 6270DWLE 12V 10mm Mobile Driver Drill • The newly redesigned clutch lock out lever lets you to switch between hammer drill, drill and drive modes without losing your clutch setting • State-of-the-art two piece ND-31 Makita motor • Clutch lock system • Single sleeve keyless chuck 8434DWAE 14.4V 13mm Hammer Driver Drill • Perfect for fitting door furniture, kitchen cupboard work, joinery and general fitout jobs • 2 speed gear box let’s you choose between speed and power • 16 torque settings for precise screw depth setting, prevents driving of screws deeper than surface • Includes 2 x batteries, case and torch 6280DWLE 14.4V 10mm Mobile Driver Drill • The newly redesigned clutch lock out lever lets you to switch between hammer drill, drill and drive modes without losing your clutch setting • State-of-the-art two piece ND-31 Makita motor • Clutch lock system • Single sleeve keyless chuck 8444DWAE 18V 13mm Hammer Driver Drill • Perfect for fitting door furniture, kitchen cupboard work, joinery and general fitout jobs • 2 speed gear box let’s you choose between speed and power • 16 torque settings for precise screw depth setting, prevents driving of screws deeper than surface • Includes 2 x batteries, case and torch Page 30 United Tools National Catalogue 2006 • The newly redesigned clutch lock out lever lets you to switch between hammer drill, drill and drive modes without losing your clutch setting • State-of-the-art two piece ND-31 Makita motor • Clutch lock system • Single sleeve keyless chuck 6980FDWAE 12V Mobile Impact Driver 6349DWAE 18V 13mm Mobile Driver Drill • Externally accessible replaceable carbon brushes • Soft fitting rubber clad palm grip • Fully recessed screws in the hammer casing • The brilliant LED Maklite will make fitting screws under stairs or inside a cabinet a breeze BDF460WAE 24V 13mm Mobile Driver Drill • 13mm single sleeve keyless chuck • Wrap around rubber handles for all day comfort and control • 16 torque settings • Variable speed and forward/reverse switch 6835DWAE 12V Mobile Screwdriver • Replaceable brushes extends motor life by up to 5 times • Variable speed plus reverse • 2 speed gear box • Heavy duty keyless chuck • Electric brake for accurate driving • 16 torque settings for precise screw depth BHP460WAE 24V 13mm Hammer Driver Drill • Auto feed screwdriving • Easy 3 stage screw adjustment range from 25mm to 41mm screws • Newly designed narrow housing allows driving 15mm from internal right angle walls (corners) • Fast loading and unloading screw system with screw strips holding 50 screws 6934FDWAE 14.4V Mobile Impact Wrench • 3 mode dial for hammer, driver and drill action • Replaceable brushes extends motor life by up to 5 times • Variable speed plus reverse • 2 speed gear box • Electric brake for accurate driving • 16 torque settings for precise screw depth BHR200SJE 24V 20mm Rotary Hammer • Lightweight and compact body for superior handling • Powerful 120Nm of torque to take on the toughest jobs • The clever Maklite located at the head of the tool will provide bright white light right into where you are working, lighting up even the darkest corners 6935FDWAE 14.4V Mobile Impact Driver • Great tool for hard drilling applications where you don’t want to drag a lead around • Intelligent charging system for efficient charging and increased battery life • 3 mode rotation only, rotation with hammer and hammer only • Centre line balance • Variable speed with reverse • Electric brake 6319DWAE 12V 13mm Mobile Driver Drill • Externally accessible replaceable carbon brushes • Fully recessed screws in the hammer casing • The brilliant LED Maklite will make fitting screws under stairs or inside a cabinet a breeze • Forward/reverse with variable speed • Rubber clad handle • 2 piece motor DK1840AL3 18V 4 Piece Mobile System • 13mm single sleeve keyless chuck • Wrap around rubber handles for all day comfort and control • 16 torque settings • Variable speed and forward/reverse switch 6339DWAE 14.4V 13mm Mobile Driver Drill System includes: • 8444D MXT Hammer Driver Drill • JR180D Recipro Saw • 5620D Circular Saw • ML180 Swivel Head Torch • 3 x 2.0Ah Ni-Cd Batteries • Charger DK1842AL3 18V 4 Piece Mobile System • 13mm single sleeve keyless chuck • Wrap around rubber handles for all day comfort and control • 16 torque settings • Variable speed and forward/reverse switch United Tools National Catalogue 2006 System includes: • 8444D MXT Hammer Driver Drill • JR180D Recipro Saw • 5620D Circular Saw • ML180 Swivel Head Torch • 3 x 2.0Ah Ni-Cd Batteries • Charger Page 31 DK1860AL3 18V 6 Piece Mobile System 5902B 235mm Circular Saw System includes: • 8444D MXT Hammer Driver Drill • JR180D Recipro Saw • 5620D Circular Saw • 4334D Jigsaw • UB181D Blower • ML181 Swivel Head Radio Torch • 3 x 2.0Ah Ni-Cd Batteries • Charger DK1861AL3 18V 6 Piece Mobile System • 2,100W motor • Hardworking saw with the power to rip through most timbers • Tight gear tolerances minimise arbor float and noise • Easy to use height adjustment lock lever • Front and rear bevel locks • Improved handle design 5007NB-2 185mm Circular Saw System includes: • 8444D MXT Hammer Driver Drill • JR180D Recipro Saw • 5620D Circular Saw • 4334D Jigsaw • UB181D Blower • ML181 Swivel Head Radio Torch • 3 x 2.0Ah Ni-Cd Batteries • Charger 9059K-2 230mm Angle Grinder • Heavy duty 1,500W motor • Thickened gauge, fully calibrated aluminium base for excellent stability and accuracy • Durable and robust design with all needle and ball bearing construction for long tool life • Excellent saws for ripping and crosscut, in the workshop or onsite • Includes blades, tool bag and cap 5057KB 185mm Dustless Circular Saw • Power packed tool with torque limiter • Deadman switch for user safety • Rotatable solid alloy gear housing • Dust proof bearings and resin coating on critical parts improves durability • Automatic cut out brushes • Includes 3 x grinding discs, case and cap 9069SP Medium Industrial Angle Grinder • Dust collection container captures waste for a clean work environment or can be connected to a dust extraction system • Standard blade cuts 4-6mm exterior fibre cement sheet cladding • Bevel cuts 0°-45° enabling a wide variety of cuts • Fully enclosed upper guard 5740NBSP 185mm Circular Saw • Large dead man switch for user safety • Compact low profile gear housing great for working in tight areas • Gear housing can be rotated to suit different cutting and grinding operations • Dust proof bearings and resin coating on critical parts improve durability • Adjustable wheel guard 9207SPB 180mm 2 Speed Sander Polisher • Thin kerf blade cuts through all grades of timber even hardwoods • Improved handle design gives great balance • Bevel lock to 45º • Calibrated aluminium base for increased accuracy • Includes extra Makedge blade N5900B-2 2000W 235mm Circular Saw • Perfect addition for automotive repairs and general sanding work • 2 speed to allow for use as a sander or a polisher • All ball bearing construction for long life and smooth operation • Reversible side handle to suit operators preference • Cast alloy gear housing for durability 9227CB 180mm Sander Polisher • Fine gears and bearings tolerances for quieter, more accurate running • Repositioned fan vent, to blow the cutting line clean • Cutting window, to give you a clear view of your line and the blade • Great balance and standard base dimensions to fit your old workbench • Includes cap and extra blade N3701 6.35mm Trimmer • Electronic speed control maintains constant speed under load, critical for a professional finish • Perfect for clear coat finishes • Variable speed with preset stepped speed dial, ideal for ultra slow polishing • Hook and loop base for wool bonnet Page 32 United Tools National Catalogue 2006 • Ideal for trimming laminates, edging, freehand and template design work • Clear base plate allows you to perform precise cutting for a perfect finish • Robust and durable aluminium housing SJS is a massive advance in power, safety and durability. 9557NB 115mm Angle Grinder • Powerful 840W motor • Durable motor with patented zigzag varnish and resin coat on critical parts increases tool reliability • 90° left and right head rotation • Side switch conveniently located • Side handle can be used in left or right handed position • Shaft lock for easy wheel changes The design gives maximum transfer of power and torque, while minimising the wear and tear that happens with older technology. Plus it disengages under extreme loads, protecting the user and the machine. 9558NB 125mm Angle Grinder • Powerful 840W motor • Durable motor with patented zigzag varnish and resin coat on critical parts increases tool reliability • 90° left and right head rotation • Side switch conveniently located • Side handle can be used in left or right handed position • Shaft lock for easy wheel changes ...and it’s only inside Makita high powered angle grinders. SJS is an advanced drive system, based on a coil spring which wraps around the internal drive spindle. On start-up, the coil tightens around the spindle to produce smooth, direct and highly efficient drive from the motor to the grinder disc. 9564C 115mm Angle Grinder • SJS mechanism delivers outstanding performance and durability • Electronic limiter prevents accidental motor overload and burnout • Dust proof bearings, zigzag and resin coated on critical parts • Slim body design for comfortable grip and control • Shaft lock for easy wheel changes • Solid aluminium gear housing If the grinder ‘grabs’ or overloads the motor, the SJS is instantly disengaged by the reversed force and the drive spindle rotates freely. 9553NBK 710W 100mm Angle Grinder 9565C 125mm Angle Grinder • 710W motor • Ideal for domestic or light industrial use • Durable motor with patented zigzag varnish and resin coating on critical parts increases tool reliability • Includes 6 grinding discs and case 9555NBK 710W 125mm Angle Grinder • SJS mechanism delivers outstanding performance and durability • Electronic limiter prevents accidental motor overload and burnout • Dust proof bearings, zigzag and resin coated on critical parts • Slim body design for comfortable grip and control • Shaft lock for easy wheel changes • Solid aluminium gear housing 9565CN 125mm Angle Grinder • 710W motor • Ideal for domestic or light industrial use • Durable motor with patented zigzag varnish and resin coating on critical parts increases tool reliability • Includes 5 x grinding discs and case 9556NB 100mm Angle Grinder • Deadman switch • Super Joint System (SJS) delivers outstanding performance and durability • Electronic limiter prevents accidental motor overload and burnout • Dust Proof Bearings, zigzag varnish and resin coated on critical parts to improve durability 9565CV 125mm Angle Grinder • Powerful 840W motor • Durable motor with patented zigzag varnish and resin coat on critical parts increases tool reliability • 90° left and right head rotation • Side switch conveniently located • Side handle can be used in left or right handed position • Shaft lock for easy wheel changes United Tools National Catalogue 2006 • Dial up variable speed for precise speed control • Super Joint System (SJS) delivers outstanding performance and durability • Electronic limiter prevents accidental motor overload and burnout • Dust Proof Bearings, zigzag varnish and resin coated on critical parts to improve durability Page 33 9032 6mm, 9mm, 13mm Belt Sander BO4553 1/4 Sheet Palm Sander • The perfect sander for filing out housings or delicate work • Head adjustment 110° for easy handling • Variable speed control • Can be connected to dust extraction system • Low profile belt head, 14mm • Optional 6mm and 12mm arms and belts available 9403 100mm Belt Sander • Ideal for close edge work • Dust bag for clean and efficient sanding and can connect to dust extraction system • All ball bearing construction for smooth operation • Palm grip design for comfort and control BO4561 Triangular Base Palm Sander • Excellent for floor sanding, cleaning and smoothing off table and bench tops • Extremely powerful and robust • A fast belt speed of 500m/min so it will rip through any timber quickly and efficiently • Takes standard size belts 100 x 610mm for convenience 1902SP 82mm Planer • Precision sanding action for confined areas • Perfect for sanding louver doors, windows or any hard to reach areas • Highly efficient through the pad dust collection with dust bag or can be connected to dust extraction system • Fast and smooth operating action BO4900V 1/2 Sheet Finishing Sander • A sturdy, robust planer for all trade applications • Powerful 580W motor • Standard mini reversible TCT blades that provide a razor sharp long cutting life • V-groove chamfering guide 9mm fixed rebate capability • Includes a set of blades BO3700SP 1/3 Sheet Finishing Sander • Integrated through the pad dust control with paper waste bags or connect to dust extraction system • Dial up electronic variable speed control • Hook and loop base pad that suits all common papers • Reduced vibration for the operator with Makita’s unique counter balancing system BO5021 125mm Random Orbital Sander • Powerful and lightweight for coarse sanding of stock, through to fine finishing and preparation for paint or lacquer • Highly efficient through the pad dust collection with removable dust bag or connect to dust extraction system • Improved base system reduces vibration • Includes 9 abrasive sheets and punch plate 9910SP 76mm Belt Sander • Sure grip hook and loop base provides quick paper changes • Dial up variable speed • Very low vibration • Through the pad dust extraction • Connects directly to dust extraction system or dust bag • Detachable front handle for working in confined areas BO6030 150mm Random Orbital Sander • Ideal for stripping back paintwork on weatherboards, furniture, etc • Auto tracking system constantly keeps the belt centred • Compact body design makes it ideal for flush finishing • Efficient built in dust extraction system with bag provided or connects directly to dust extraction system 9924DB 76mm Belt Sander • Variable speed control • Efficient through the pad dust extraction for a cleaner working environment • 3mm orbit diameter provides a swirl free finish • Ergonomic rubber clad rear handle • Connects directly to dust extraction system or dust bag BO6040 150mm Random Orbital Sander • This sander has the versatility to use both 76mm and 100x610mm belts • Excellent for floor sanding, cleaning and smoothing off table and bench tops and can be connected to dust extraction system • Fine adjustment tracking • Large lever for quick belt changes • Graphite pad for reduced belt wear and reduced heat in the sanding area Page 34 United Tools National Catalogue 2006 • Dual mode selector for ‘random orbit’ action (finishing) and ‘random orbit with rotation’ action (coarse and polishing) • Variable speed control • Very low vibration • Recommend this sander to be connected to dust extraction system DA3010F 10mm Angle Drill DP4001K 13mm Drill • Ideal for close quarter or right angle drilling or driving • Paddle switch for easy one handed operation • Variable speed (0-1,400) for controlled drilling • Handy Maklite feature lights up those dimly lit work areas • Forward/reverse action DA3011F 10mm Angle Drill • Aluminium gear housing for durability and longer tool life • Large variable speed trigger with forward/reverse action • Lock-on lever allows the drill to be locked at max. rpm with the flick of a lever • Side handle swivels 360° for convenient operation DP4003K 13mm Drill • Ideal for close quarter or right angle drilling or driving • Paddle switch for easy one handed operation • Variable speed (0-1,400) for controlled drilling • Handy Maklite feature lights up those dimly lit work areas • Forward/reverse action 4323 Jigsaw • Aluminium gear housing for durability and longer tool life • Large variable speed trigger with forward/reverse action • Lock-on lever allows the drill to be locked at max. rpm with the flick of a lever • Side handle swivels 360° for convenient operation GB600 150mm Bench Grinder • Powerful 400W motor • Smooth and quiet cutting with anti-vibration • Comfortable D-handle design • Adjustable speed dial for greater accuracy for a wider range of applications • Bevel cuts to 45° left or right • Can be connected to dust extraction system 4340CT Jigsaw • Ideal for the home workshop • Complete with protective shields and tool rests • 150mm 180W bench grinder • 2.0 Amp 1/3Hp GB601 150mm Bench Grinder • Powerful 720W motor • Variable speed control with constant speed electronics • 3 mode oscillating feature allows faster cutting • Accepts bayonet shank blades • Adjustable aluminium base for bevel cutting • Ergonomic design D-handle 4341CT Jigsaw • Ideal for the home workshop • Complete with protective shields and tool rests • 150mm 240W bench grinder • 2.5 Amp 1/2Hp GB800 205mm Bench Grinder • Powerful 720W motor • Variable speed control with constant speed electronics • Extremely low vibration • 3 mode oscillating feature allows faster cutting • Built in dust blower • Tilting base that cuts up to 45° • Barrel handle design HG1100 Heat Gun • Check out this 540W machine which is perfect for light industrial applications • Complete with protective shields and tool rests • 4 Amp and 3/4Hp HG1100KIT Heat Gun Kit • 2,000W of flameless heat • Variable temperature control 100° -600°C • 2 speed blower fan • Perfect for stripping paint, varnish and many other applications • Ceramic core protects the heating element, ensures a longer working life United Tools National Catalogue 2006 • 2,000W of flameless heat • Variable temperature control 100° -600°C • 2 speed blower fan • Perfect for stripping paint, varnish and many other applications • Ceramic core protects the heating element, ensures a longer working life Page 35 HL500 Heat Gun HR2020 20mm Rotary Hammer • Great for general purpose work • 1,500W of flameless heat • 2 temperature ranges • 2 air speed settings • Ceramic core protects the heating element – ensures a longer working life • Unique body design allows the gun to stand upright for no hands operation HM1304 Demolition Breaker • 2 mode operation rotary hammer in masonry, standard drilling in other materials (optional chuck adaptor and chuck) • Positive slide lock chuck accepts all SDS type bits • Variable speed with reverse • Torque limiter to protect the tool and operator if the bit should jam HR2450 24mm Rotary Hammer • Powerful 1,500W motor • Accepts 30mm hexagonal bits • Convenient lock-on button for continuous operation • Secure locking bit system • Internal ‘O’ ring fits around the end of the bit to ensure damaging masonry dust is kept out of the cylinder HP1620KSP 13mm Hammer Drill • 2.7 joules • Versatile 3 mode operation for rotary hammer, hammer only in masonry, standard drilling in other materials (optional chuck adaptor) • Chuck accepts all SDS type bits • Variable speed with reverse HR2450FT 24mm Rotary Hammer • Extremely light, compact and a powerful 650W motor • The reversing system ensures full power in both forward and reverse • Large trigger switch for easy operation • Ergonomic in-line design for maximum power, control and comfort • Side handle swivels 360° • Includes 9 piece bit set and case HP1621KSP 13mm Hammer Drill • 2.7 joules • Versatile 3 mode operation for rotary hammer, hammer only in masonry, standard drilling in other materials (optional chuck adaptor) • Chuck accepts all SDS type bits • HR2450FT comes standard with SDS chuck and keyless drill chuck • Maklite built into the handle casts light directly onto the work area HR3000C 30mm Rotary Hammer • Extremely light, compact and a powerful 650W • The reversing system ensures full power in both forward and reverse • Large trigger switch for easy operation • Ergonomic in-line design for maximum power, control and comfort • Keyless chuck • Includes 9 piece bit set and case HP2051 20mm 2 Speed Hammer Drill • 5.3 joules per impact • 3 mode dial selects hammer, drill or hammer drill • Variable speed control dial • Auto cut out brushes and service indicator light minimises down time and maximises motor life HR4000C 40mm Rotary Hammer • These power packed hammer drills will take on the most demanding jobs with ease • Built in torque limiter reduces risk of damage to the drill and operator if the bit jams • 2 speed gearbox with forward/reverse • Keyless chuck HP2071F 20mm 2 Speed Hammer Drill • Electronic variable speed control dial • Soft start electronic switch • Automatic cut out brushes with service indicator light and torque limiter • 2 mode operation – rotation with hammer and hammer only • D-handle for chiselling and straight handle for drilling HR5001C 50mm Rotary Hammer • Super powerful 1,010W motor • 2 speed mechanical gearbox • Variable speed trigger and electronic speed adjusting dial • A torque limiter to protect you and the tool from damage • Built-in Maklite casts a light onto the drilling area when lighting is inadequate Page 36 United Tools National Catalogue 2006 • Power packed to handle drill bits up to 50mm diameter with 2 mode operation – rotation with hammer and hammer only • Electronic soft start with a large 3 finger trigger to reduce fatigue during prolonged work • Automatic cut out brushes with service indicator light and torque limiter HK0500 Power Scraper HM1400 Electric Breaker • Powerful 550W motor with 2,000– 3,500bpm for maximum performance • 12 position bit adjustment • Variable speed control dial • Large and comfortable trigger switch • One touch sliding chuck for easy bit installation and removal HK1810 Power Scraper • Hard hitting reliability in a comfortable T-grip design • Air cushioned system prevents excessive vibration and allows greater operator comfort • Automatic cut out brushes • 30mm hexagonal bit shank • Auto idle will only hammer when the bit is in contact with the material HM1810 Electric Breaker • For light scraping, chiselling and chipping; ideal for remodelling or renovation work • Air cushion hammering for long tool life • Quick change bit retainer • Automatic cut out brushes • All ball bearing construction for longer tool life • Variable speed HM0860C Demolition Hammer • Lowest vibration in its class • AVT counter weight mechanism helps to reduce vibration • Auto cut-off brushes • Warning light indicates trouble with cord • 28.6mm Hex shank JN1601 1.6mm Nibbler • Full wave electronic variable speed and power control • 12 joules per impact power • Spade or chisel can be locked into 12 different positions • Automatic cut out brushes • Warning indicator light lets you know when the tool requires servicing HM1100C Demolition Hammer • Clean and precise work in keystone plate, deck plate and other corrugated sheet materials • Die rotates 360° • Ergonomic, slim body design for easy gripping • Lock on sliding switch for continuous use • Built-in thickness gauge for convenience JN3200 3.2mm Nibbler • Powerful 1050 watt motor • 16 angle settings for chisel bits • Rubber cladded rear and side handle for reduced vibration • Automatic brush cut-out system • Soft start feature • Service indicator lamp • Hammer idling mode • Slide on and off switch HM1202C Demolition Hammer • Built-in thickness gauge for convenience • Easy punch and die replacement for less down time • Powerful 820W motor allows cuts through 3.2mm mild steel • Cutting line and blade action easily visible JR3050T Recipro Saw • Large capacity SDS Max demolition hammer for speed, durability and comfort • Electronic speed adjusting dial • Powerful 1,450W motor to handle the most demanding jobs • 12 angle settings for bit position • Automatic cut out brushes with service indicator light HM1304 Demolition Breaker • A huge new 1,010W motor • Strokes-per-minute have been increased by almost 20% • Minimal vibration • A bigger variable speed trigger with lock-on button • Push in tool-less blade change system with quick release JR3070CT Recipro Saw • Powerful 1,500W motor • Accepts 30mm hexagonal bits • Lock-on button for continuous operation • Secure locking bit system • Internal ‘O’ ring fits around the end of the bit to ensure damaging masonry dust is kept out of the cylinder United Tools National Catalogue 2006 • Featuring AVT counter weight mechanism which helps reduce vibration • Preset dial for speed control for optimal stroke speed for application Page 37 JS1300 1.3mm Straight Shears LS0714 190mm Slide Compound Saw • 360° swivel shear head for increased manoeuvrability • Large variable speed trigger for controlled cutting speed • Brushes are easily accessible for fast replacement • Lock on button for continuous operation JS1600 1.6mm Shears • Four steel slide arms on linear bearings move in two stages, to give this 190mm saw a massive 300mm width of cut • 1,010W motor • Bevel cuts up to 45° left or 5° right perfect when you are undercutting boards for a super snug fit LS1013 260mm Slide Compound Saw • Blade design results in no material loss • Body grip design with a paddle switch for easy one handed operation • A lock off switch prevents accident starting • Built-in thickness gauge for convenience JS1660 1.6mm Straight Shears • 1,430W motor • Compound and mitre cuts to 45° left and right • Dust extraction to bag or can be connected to dust extraction system • Self closing safety blade cover • Constant speed control, ideal for cutting into even the hardest timbers LS1040 260mm Compound Mitre Saw • Ideal for straight cutting • Mar-free model has a stepped blade, shims for blade adjustment to minimise burrs JS1670 1.0mm Straight Shears • Heavy duty 1,650W motor • Precision machined aluminium base, with fully calibrated angles • Bevel cuts 45° left only • Electric brake • Removable safety lock button • Dust extraction to bag or dust extraction system LS1214 305mm Slide Compound Mitre Saw • Cuts close curves, right or left, in 30mm radius mild or stainless steel • Visible cutting line • Continuous metal curl in one direction for easier operation JS3200 3.2mm Shears • The deepest cutting capacity of any 305mm slide saw on the market, cutting a huge 115mm deep • Powerful motor 1,650W • Precision bevel cutting 45° both left and right, with positive stop at 33.9° ideal for crown moulding • Mitre cutting is a breeze with the base rotating 52° right and 47° to the left with positive stops at all common angles UT120 Power Mixer • For heavy duty cutting up to 3.2mm mild steel and 2.5mm stainless steel • Blades have 4 cutting edges each • Built-in thickness gauge • Ball and needle bearing construction for long tool life • Highly visible sight line for precise following of patterns LC1230 305mm Metal Cutting Saw • Dial up variable speed control makes easy batch mixing and consistency in materials • Electronic speed control for soft start up, constant speed, pre-selectable speed • Thermal and current overload protection for long durability • Full metal gearbox • Lock on switch NHP1310 13mm 2 Speed Hammer Drill • Powerful 1,750W motor • Lock off button prevents accidental starting • Tool-less guide plate adjusts 0°-45° for quick and easy mitre cutting • Large cast aluminium base for stability • Externally accessible brushes for easy maintenance Page 38 United Tools National Catalogue 2006 • Powerful 600W motor • Quick action change dial for hammer and rotation or rotation only • Ergonomic handle design for comfort and control • 2 speed gear selection with variable speed in both ranges gives you greater control and accuracy SG1250 125mm Wall Chaser TW0350 12.7mm square drive Impact Wrench • Ergonomically designed handle for comfort and control • Conveniently located front cover prevents dust from spreading in every cutting depth • SJS feature provides smooth and comfortable cutting by reducing the start up shock and protection from accidental wheel jam • Easy blade change 6906 19mm Impact Wrench • Incredible high fastening torque of 350Nm • Aluminium hammer case with high durability • Cylinder formed housing with high rigidity and durability • Efficient impact system with less vibration and longer tool life • Forward and Reverse rocker switch TW1000 25.4mm square drive Impact Wrench • Powerful 588 Nm of torque • Rocker type reversing switch for easy one handed or reverse operation • Side handle adjusts 360° for convenient operation • Externally accessible carbon brushes for easy maintenance • This powerhouse packs 1000Nm of torque, with it’s lightweight plastic/ glass reinforced housing and handle • Rubber bumper protection front/rear and on the base of the handle • It’s rubberised soft grip makes for a comfortable tool to work with TW0200 12.7mm square drive Impact Wrench • High torque of 200Nm • Efficient impact system with less vibration and longer tool life • Variable speed switch with slide through forward/reverse switch • Convenient tool hook attaches to both sides of tool 7104L Chain Mortiser • Notches or cuts through-holes in thick wood stock quickly, cleanly and accurately • Portable at only 17kg • Large adjustable vice for attaching firmly onto logs • Ideal for post and rail fencing and door lock mortising DPC7311 Petrol Power Cut • Unique 5 stage air filter system • Perfectly balanced • Optimum vibration dampening • Decompression button for easy starting • Quick adjust belt and blade cover system • Large volume muffler • Computer controlled ignition SC130DRA Mobile Rod Cutter • Powerful 12V motor ensures a clean cut into steel rod • Up to 150 rods (10mm) on a sigle charge • Powerful hydraulic cutting with low vibration • Variable speed trigger Power tool vibration is getting a real hammering from OH&S organisations around the world… with good reason. Prolonged exposure to tool vibration can cause permanent nerve, muscle and joint damage. So we’re proud to be taking the bad vibes out of Makita tools, using the same heavy-duty engineering techniques that protect buildings from earthquakes. METABO TOOLS FOR THE PROFESSIONAL SAFETY CLUTCH The Metabo S Automatic Safety Clutch has proven its worth in millions of Metabo grinders. If the tool jams, the automatic safety clutch instantly slips the gears and reduces torque, preventing kickback and injury. In addition to protecting you, it also protects the gearbox and motor, preventing burnout and prolonging the life of the tool. Selected Metabo grinders also feature Soft Start, Restart Protection, Safety Switch and Deadman Switch for your protection. MARATHON MOTOR Metabo's Marathon motor lasts up to 5 times longer than other powertool motors. Every aspect of its design is geared towards longer life and exceptional performance. It is a high efficiency, heat tolerant motor with doubly protected windings, high performance cooling fan, and patented winding protection grid. MFE 30 1400 Watt Wall Chaser MFX 65 2500 Watt Wall Chaser ASA 1202 & MFE 30 Wall Chaser & Dust Extractor 3.5Nm, 125mm diamond cutting blades • Chase up to 30mm wide and 30mm deep • Safety Clutch and Deadman Switch • No tools required with rotating hand grip • Made in Germany 18Nm of torque for the toughest jobs. • 7 settings to cut slots or chases 3-41mm wide • Adjustable depth of cut 20 - 65mm • Stable, clean cutting with its 4 wide rollers • Made in Germany Combine Metabo’s MFE 30 Wall Chaser with the ASA 1202 Dust Extractor • The extractor has a 1200 watt motor with high suction (248mbar) and 25lt capacity • Smart power outlet on vacuum W 6-100 Combi 650 Watt 100mm Angle Grinder W 10-125Q 1010 Watt 125mm Angle Grinder W 14-125 Ergo 1400 Watt 125mm Angle Grinder Ideal for builders and tilers • Lightweight with a narrow body, perfect for small cutting and grinding jobs • Plus tile cutting attachment • Rear-mounted switch protected from dust Ideal for engineers, welders and manufacturers • Perfect balance of weight and power • Safety clutch protects you from kickback injury • 'Quick' tool-less disc change saves hassle • German Made • Anti-Vibration side handle Ideal for heavy engineering and pipe fitting • 50% more torque than other 5" grinders • Lightweight with a rotatable, 3-position rear handle for total control of all that power • German Made • Anti-Vibration side handle WE 14-150 Plus 1400 Watt 150mm Angle Grinder W 25-230 2500 Watt 230mm Angle Grinder WX 23-230Q 2300 Watt 230mm Angle Grinder Packed with safety features: soft start, restart protection, overload cut-out, deadman switch and Metabo’s unique safety clutch • ‘Quick’ tool-less disc change • VTC electronics maintain constant disc speed Ideal for heavy engineering, rigging, foundries • Metabo's most powerful grinder • Rotatable hand grip & 3 position side handle • Spindle lock and adjustable blade guard • German Made • Anti-Vibration side handle Ideal for heavy engineering, rigging, foundries • Soft start for smooth start up • Rotatable hand grip & 3 position side handle • Spindle lock and adjustable blade guard • German Made • Anti-Vibration side handle CS 14-15 2100 Watt, 355mm Cut-off Saw GE 700 710 Watt Electronic Die Grinder GE 900 Plus 900 Watt Electronic Die Grinder Ideal for rapid and precise cutting of steel, Non Ferrous metals, iron and cast iron • Mitre adjustment up to 45 deg • Cutting capacity: Rolled bars 65mm ø; Pipes 120mm ø; Structural Steel 120 x 130mm • Versatile, multi-purpose die grinder • Variable speed for grinding and cutting hard and soft materials (including plastic) • Spindle lock for easy changing of tools • Made in Germany • Very high torque grinder for the toughest jobs • Variable speed for grinding and cutting hard and soft materials (including plastic) • Spindle lock for easy changing of tools • Made in Germany METABO'S 3YR PROFESSIONAL WARRANTY Metabo’s XXL Warranty Program is a 2yr extension of the 1yr warranty for customers who register personal information online (www.metabo.com/xxl) within four weeks of purchase. METABO TOOLS FOR THE PROFESSIONAL 4 MODE MULTIHAMMERS Hammer, chisel, high-speed drill, low-speed drill KHE 32 900 Watt, SDS Plus 3 mode Rotary Hammer CODE! Ready Ideal for all tradespeople who work with concrete on site • Hammer, chisel and drill at low speed (with optional keyless chuck) • Cruise through concrete up to 32mm, wood to 40mm, steel to 18mm UHE 22 705 Watt, SDS Plus KHE 28 1010 Watt, SDS Plus 3 mode Rotary Hammer CODE! Ready Ideal for all tradespeople who work with concrete on site • Hammer, chisel and drill at low speed (with optional keyless chuck) • Cruise through concrete up to 28mm, wood to 40mm, steel to 13mm KHE 55 | KHE 75 1050 | 1150 Watt SDS Max Rotary Hammer • 40/45mm max drill Ø • 8 Chisel positions • VTC Electronics CODE! Ready • 1300-2600 / 1325-2650 impacts per min. • 1-9 / 1-10J Single blow energy • Machine weight 5.9 / 6.4kg UHE 28 pictured CODE! Ready UHE 28 1010 Watt, SDS Plus Metabo’s SDS Plus Multihammers are that unique all-round tool you’ve always wanted. Cruise through concrete quickly and cleanly and then, with the turn of a knob and a 3 second chuck change, you can also drill at high or low speed. For chipping or tile removal, it also has chisel mode. UHE 28 UHE 22 Max. Drilling Capacities: 2 speed Chisel Concrete Wood Steel gearbox mode 28mm 40mm 16mm 9 9 22mm 30mm 13mm 9 9 BHE 26 750 Watt, SDS Plus 2 mode Rotary Hammer CODE! Ready 9 - CODE! Ready Ideal for all tradespeople who work with concrete • Hammer and drill at low speed (with optional keyless chuck) • Cruise through concrete up to 26mm, wood to 40mm, steel to 13mm NEW! MHE 95 1500 Watt, SDS Max Demolition Hammer • SDS Max Chisel • 12 Chisel positions • VTC Electronics • Impacts per minute • Single-blow energy • Machine weight CODE! Ready 1020-2040 5-25J 9.8kg BHE 20 Compact 450 Watt, SDS Plus 2 mode Rotary Hammer Compact design, built tough in Germany and it weighs only 2.6 kg • Rubber coated handle for comfort • Drills concrete 16mm, wood 20mm • 2 position Anti-Vibration side handle (not pictured) • Safety Clutch IS YOUR TOOL PROTECTED? Metabo's CODE! immobiliser makes your powertool useless to potential thieves. MHE 65 1150 Watt SDS Max Chipping Hammer • SDS Max Chisel • 8 Chisel positions • VTC Electronics METABO'S 3YR PROFESSIONAL WARRANTY • Impacts per minute • Single-blow energy • Machine weight CODE! Ready 1325-2650 1-10J 5.7kg Metabo’s XXL Warranty Program is a 2yr extension of the 1yr warranty for customers who register personal information online (www.metabo.com/xxl) within four weeks of purchase. Metabo’s CODE! works with the same ease as a car immobiliser - you simply program your remote with a 3-digit code of your choice. Then, at the push of a button, your Metabo power tool is immobilised and can’t be operated until reactivated with your remote. CODE! is a powerful deterrent to thieves. METABO TOOLS FOR THE PROFESSIONAL SE 2800 400 Watt Screwdriver SE 4000 400 Watt Drywall Screwdriver DWSE 6.3 550 Watt Screwdriver New ergonomic and lightweight design for user comfort even after all day use • 12 Nm torque • Speed 0 - 2,800 rpm • Scaffolding hook for convenience • Patented bit-change system • Weighs less than 1.2kg! New ergonomic and lightweight design for user comfort even after all day use • 6 Nm torque • Speed 0 - 4,000 rpm • Scaffolding hook for convenience • Patented bit-change system • Weighs less than 1.2kg! Ideal for roofers • Adjustable, removable depth stop • 10 torque settings from 3-18Nm • Self drilling screws up to 6.3mm diam (14 gauge), self drilling wood screws up to 7mm diameter • Made in Germany USE 8 550 Watt Screwdriver BE 622 620 Watt Drill BE 710 710 Watt Drill Ideal for high-torque fastening in hardwood or steel • Precise, uniform finishing with 10-stage torque clutch • Adjustable, removable depth stop • Optimal speed for self tapping screws up to 14 gauge and self drilling wood screws 8mm x 100 mm • Made in Germany Ideal for builders, carpenters, plumbers and sparkies • Triple reduction gearing delivers huge 35Nm torque • Variable speed and reversing for various applications • Built to last with die cast aluminium gear housing • Drilling capacities: steel 16mm, softwood 40mm • Made in Germany Ideal for engineering and metalworking • 2 speed gearbox with variable speed, reversing • Built to last with alloy gear housing, Marathon motor • Drilling capacities: steel 13mm/8mm, softwood 40mm/25mm • Made in Germany BDE 1100 1100 Watt Drill SBE 560 560 Watt Impact Drill SBE 705 705 Watt Impact Drill Ideal for heavy engineering applications Ideal for tradespeople who need a versatile drill • 55Nm torque and 16mm chuck for the really big jobs • Outstanding power-to-weight gives 5Nm torque • 2 speed gearbox with variable speed, reversing • 13mm quick action keyless chuck • Drilling capacities: steel 16mm/10mm, softwood • Variable speed and reverse for precise control 40mm/25mm • Drilling capacities: 10mm steel, 20mm wood, • Made in Germany 12mm concrete Ideal for carpenters, maintenance workers and tradies • 2 speed gearbox with variable speed, reversing • Built to last with alloy gear housing, Marathon motor • Drilling capacities: concrete 20mm, steel 13/8mm, softwood 40/25mm • Made in Germany SAFETY FIRST SBE 750 750 Watt Impact Drill SBE 850 Impulse 850 Watt Impact Drill Ideal for plumbers, sparkies, and builders • 2 speed gearbox with variable speed, reversing • Built to last with alloy gear housing, Marathon motor • Drilling capacities: concrete 20mm, steel 13/8mm, softwood 40/25mm • Made in Germany SBE 850 Contact 850 Watt Impact Drill Ideal for shopfitters, cabinetmakers and carpenters • Impulse function for easy starts on smooth surfaces and fast removal of screws with damaged heads. • Drilling capacities: concrete 20mm, steel 13/8mm, softwood 40/25mm • Made in Germany Metabo’s unique Contact feature protects the user from shock if they drill into live wiring or earthed material. As soon as the bit strikes the conducting or earthed material, the tool switches off immediately. RWE 1100 1100 Watt Agitator SBE 1010 Plus 1010 Watt Heavy Duty Impact Drill • 28 Nm of torque for heavy drilling work and VTC electronics for constant drill speed even under very heavy loads • 2 speed gearbox with variable speed, reversing • Overload and restart protection, Safety clutch • Made in Germany CODE! Ready METABO'S 3YR PROFESSIONAL WARRANTY Ideal for sparkies, plumbers, renovators and builders • Drilling capacities: concrete 20mm, steel 13/8mm, softwood 40/25mm • Made in Germany Metabo’s XXL Warranty Program is a 2yr extension of the 1yr warranty for customers who register personal information online (www.metabo.com/xxl) within four weeks of purchase. • Ideal for plasterers, painters & bricklayers • High torque agitation and mixing device for heavy-duty, continuous use by • Fast change of agitator paddle using the keyless adapter (accessory) • Made in Germany METABO TOOLS FOR THE PROFESSIONAL Li-Power is Metabo’s unique combination of Lithium Ion batteries and Air-Cooled chargers that delivers outstanding performance and service life LITHIUM ION BATTERIES AIR-COOLED CHARGERS Lighter. Weighs up to 40% less than other battery types. Stronger. Will perform up to 40% more work per charge than Ni-Cd batteries. Longer. The ‘Smart Pack’ battery is designed for selfpreservation, giving you a longer useful life. Li-Power chargers use the latest Air-Cooled charging technology to prolong the battery’s useful life. The chargers have a built-in fan which cools the battery fast, reducing the charging time dramatically and protecting the battery cells from damage. BSZ 14.4 Impulse Li 14.4 Volt Lithium Ion Cordless Drill BSZ 18 Impulse Li 18 Volt Lithium Ion Cordless Drill • With 2 x Li-Power batteries that are lighter, give more work per charge & designed to last longer than NiCd • AC 30 Plus Air-Cooled charger • German-made, with Impulse function for removing damaged screws easily • 20 torque settings. Drills steel 12mm, wood 30mm • With 2 x Li-Power batteries that are lighter, give more work per charge & designed to last longer than NiCd • AC 30 Plus Air-Cooled charger • German-made, with Impulse function for removing damaged screws easily • 20 torque settings. Drills steel 12mm, wood 35mm BHA 18 18 Volt Cordless Rotary Hammer ASE 18 18 Volt Sabre Saw 18 Volt Li Kit 18 Volt Lithium Ion Kit • Compact L-shape design gives greater access in tight areas • Light-weight and ergonomic • Comfortable, rubbed coated grip • 2 position Anti-Vibration side handle (not pictured) • 2 x 2.2Ah Li-Ion batteries & AC 30 Plus charger • • • • • • • Kit includes BSZ 18 Impulse Li Drill/Driver, KSAP 18 Li Circular Saw, ASE 18 Li Sabre Saw & MLA 18 Li Torch • With 2 x Li-Power batteries that are lighter, give more work per charge & designed to last longer than NiCd • AC 30 Plus Air-Cooled charger SBP 18 Plus 18 Volt Cordless Impact Drill BSP 18 Plus 18 Volt Cordless Drill Light and well balanced, with a comfortable handle Maximum power for any application Quick tool-less blade saves time and hassle Blade can be inverted 180 for greater access Tool only, not supplied with batteries or charger Suits Li-Power system & current BSZ NiCd batteries BSP 15.6 Plus 15.6 Volt Cordless Drill • German-made with incredible max torque of 65Nm • German-made with outstanding max torque of and 20 torque settings for precise screw driving 65Nm, 5 torque settings and impact function. • Unique ‘Impulse’ mode for easy removal of • Unique ‘Impulse’ mode for easy removal of damaged screws and easy starts on smooth surfaces damaged screws and easy starts on smooth surfaces • Drilling capacity: Concrete up to 16mm, Steel up to • Drilling capacity: Steel up to 13mm, Softwood up to 50mm 13mm, Softwood up to 50mm • German-made with outstanding max torque of 60Nm and 20 torque settings for precise screw driving • Unique ‘Impulse’ mode for easy removal of damaged screws and easy starts on smooth surfaces • Drilling capacity: Steel up to 13mm, Softwood up to 45mm PowerMaxx 4.8 Volt Compact Screwdriver H 1600 1600 Watt Heat Gun HE 2000 2000 Watt Heat Gun Perfect for every tool box • Small and light, it can get into the tightest spots • Built in Germany with a whopping 9Nm max. torque, this is a trade-tough tool • 2-speed gearbox & 20 torque settings • Optional keyless chuck and angle drill attachment Ideal for stripping paint, heat shrinking cables, bending conduit, thawing frozen water pipes, etc. • 3 air-flow rates & 3 heat levels: 50 / 350 / 555 ° C • Easy-to-clean air filter, for a long useful life • Powerful motor with optimal cooling • Made in Germany Ideal for mobile and stationary heating tasks • 3 air flow rates & progressive heat variation from 50°C to 600°C • Easy-to-clean air filter, for a long useful life • Powerful motor with optimal cooling • Made in Germany METABO'S 3YR PROFESSIONAL WARRANTY Metabo’s XXL Warranty Program is a 2yr extension of the 1yr warranty for customers who register personal information online (www.metabo.com/xxl) within four weeks of purchase. METABO TOOLS FOR THE PROFESSIONAL STE 70 570 Watt Jig Saw STEB 135 720 Watt Jig Saw STE 135 720 Watt Jig Saw Ideal for builders, carpenters and renovators • VC electronics for constant speed even under load • 4 stage orbital blade movement for faster, easier & smoother cutting • Timber 70mm; NF metals 20mm; Sheet metal 6mm • Made in Germany Ideal for carpenters, woodworkers and shopfitters • 'Quick' tool-less blade change saves you time • 5 stage orbital blade action for fast, smooth cuts • VC electronics for constant speed even under load • Timber 135mm; NFMetal 30mm; SheetSteel 10mm • Made in Germany Ideal for carpenters, woodworkers and shopfitters • 'Quick' tool-less blade change saves you time • 5 stage orbital blade action for fast, smooth cuts • VC electronics for constant speed even under load • Timber 135mm; NF Metals 30mm; Sheet Steel 10mm • Made in Germany Ho 0882 800 Watt Planer Ho E 0983 900 Watt Electronic Planer Ideal for builders, carpenters and renovators • Cutting width 82mm, 0-3mm cutting depth • Solid, 2-sided TCT blades, in quick cassette system for easy blade change • Chip and shaving ejector can be set left or right • Made in Germany Ideal for carpenters, woodworkers and shopfitters • Cutting width 82mm, 0-3mm cutting depth • Electronic speed control for uniform planing results • Planing guide tiltable to 45° for bevels • Solid 2-sided TCT blades, in quick cassette system • Made in Germany KS 66 1400 Watt 190mm Circular Saw PSE 1200 1200 Watt Sabre Saw Ideal for carpenters, woodworkers and builders • Use with optional guide system for precise results • Max cutting depth 66mm, bevels up to 45° • Automatic safety clutch to prevent kick back injuries • Built to last with aluminium gear housing • Made in Germany The most powerful sabre saw in Australia • 28mm cutting stroke cuts more stock in less time • Variable speed control maintains speed under load • Rotatable rear handle for those difficult positions • Blade can be inverted 180° to get into tight spots • Tool-less blade changes in seconds UNIQUE PRODUCT LF 724 S 710 Watt Paint Remover Removes paint 3 times faster than a belt sander, it can also be used as a fine planer on untreated wood. Strip rebates in windows and doors with the side cutting blades. Less toxic than chemical paint removal, it’s also easy to clean up afterwards - just connect a Metabo dust extractor Ideal for builders, carpenters and renovators • Effortless, paint removal • Simple depth adjustment from 0-0.3mm • Safety clutch prevents kickback injuries • 4 sided, reversible blades for long useful life • Made in Germany DUAL ORBIT SIZES DSE 300 Intec 300 Watt Triangular Sander Sr 358 350 Watt 1/2 Sheet Orbital Sander Ideal for carpenters, woodworkers and builders • Unique integrated sanding dust collector • Variable speed for sanding a variety of materials including heat-sensitive materials and surfaces • Soft foam base-plate adapts perfectly to work piece • Made in Germany Ideal for woodworkers and French polishers • High-grade base-plate for a smooth, even finish • Low-vibration is ensured by fine-balancing system • Quick-grip, rubber coated paper clamping device • Die-cast aluminium bearing housing for long life • Made in Germany SXE 450 Duo 400 Watt Electronic Orbital Sander Sr 10-23 Intec 200 Watt 1/3 Sheet Orbital Sander • • • • Fine-balancing system ensures the smoothest finish Quick clamping system for easy paper changes No protruding parts give full access into corners Built-in dust collector, so you don’t need an extractor for a clean work space METABO'S 3YR PROFESSIONAL WARRANTY World’s only dual orbit sander, with 6mm orbit for fast stock removal and 3mm orbit for fine finishing SPA 1101 Dust Collector Ideal for anyone who finishes wood or metal surfaces • Perfectly balanced and equipped with variable speed, it’s the right sander for any application • 150mm Velcro-backed pad for fast disc changes • Sturdy die-cast alloy bearing housing for long life • Made in Germany • The SPA 1101 is designed for use with all wood working machines in the workshop • Vacuum 740 Pa • Rated Volume Flow 548m³/h • Filter Surface Area 2m² • 60L Collection Bin Size • Made in Germany Metabo’s XXL Warranty Program is a 2yr extension of the 1yr warranty for customers who register personal information online (www.metabo.com/xxl) within four weeks of purchase. METABO TOOLS FOR THE PROFESSIONAL KGS 331 1600 Watt 10" Sliding Compound Mitre Saw BAS 260 Swift 350 Watt Band Saw • Equipped with a powerful 1600 watt induction motor and 80 tooth TCT blade, the KGS 331 gives you precise, maintenance-free performance when cutting timber and aluminium. • Max cutting depth 54mm and max cutting width 300mm (with packing) • Mitres up to 45° left and 45° right as well as beveling up to 45° left • Built for hard work with a powerful motor and tough, die cast aluminum base • Cast iron saw table: 340 x 335, tiltable to 45º • Throat Capacity: 245mm, cutting height: 100mm • Mitre fence and rip fence included • Weight 32 kg • Adjust the top and bottom roller guides without tools • Safety switch on doors stop machine when opened KGS 305 2000 Watt 12" Sliding Compound Mitre Saw BAS 317 900 Watt Band Saw • • • • • • • • • • With the biggest cutting capacity around, it's German-engineered and designed with professionals in mind 305mm blade (std): max 320mm cutting width, 115mm cutting depth Can also be used with a 315mm blade to give a max 330mm cutting width, 120mm cutting depth Set mitre & bevel angles from the front of the machine. Mitres up to 50° L, 60° R & bevels up to 47° L & R Switch between trenching and cross-cutting in seconds Machine Size: 590 x 610 x 1265 Cast iron saw table: 400 x 548, tiltable to 45º Throat Capacity: 305mm, Throat height: 160mm Workstand, mitre fence and rip fence included Weight 60 kg HC 300 1850 Watt Planer/Thicknesser BAS 505 G 1500 Watt Band Saw • • • • • • Cast iron table size: 536 x 640mm, tiltable to 45º • 280mm saw blade stroke length • Super-speed brass rollers and 3 pulley guide for accuracy and durability • Made in Germany • Weight 146kg Tough, teflon-clad die cast aluminium planing bed & cast iron thicknessing bed for accurate results The long, stable mitre fence can be adjusted from 0° - 45°, giving you plenty of support for accurate cuts High grade steel rollers ensures a smooth, even feed rate of 5m/min The patented specially sprung rollers minimise sniping of your workpiece In the event of a power failure, the HC 300 won’t restart until you want it to TS 250 2000 Watt Table Saw TKHS 315 M 2500 Watt Site Saw • • • • • • • • • It's got the power you need for big cuts and the precision you'd expect from a more expensive saw. Quickly adjust the FULL bevel angle range without any tools, from -1.5° to 46.5° The extendable table gives you a huge 620mm RHS ripping capacity At only 32kg, it's also light and compact for easy transport if you work on site. METABO'S 3YR PROFESSIONAL WARRANTY Metabo’s XXL Warranty Program is a 2yr extension of the 1yr warranty for customers who register personal information online (www.metabo.com/xxl) within four weeks of purchase. Perfect for cutting beams, boards and large panels. Motor speed 2,750 rpm Depth of Cut 85mm at 90°; 60mm at 45° Weight 71kg Made in Germany Handheld Band Saw HBS120E • Powerful 800W motor • Well balanced - motor positioned centrally • Precision blade guides • Tool-free blade changes • Externally accessible brushes • 120 x 120mm throat Cordless Drills S18TXC Cordless Impact Drills P18TXC • Also available in 14.4V, 12V & 12V angle versions • Also available in 14.4 & 12V versions Drills - Pistol Grip HDE13RQX Drills - Rear Handle • Lightweight ergonomic design • Softgrip on handle & housing • Automatic spindle lock • Comfortable, 2 finger switch • Veriable speed, reversible • Powerful 900W motor • Static stalling torque: 88Nm • Gear neck diameter: 57mm • Weight: 4.2Kg • Also available with 10 & 6mm chuck capacity • Also available with 13mm geared chuck & No.3 Morse Taper Diamond Drilling Motors Rotary Hammers - Pistol Grip PFH25QE • 2 x 18V, 2Ah reversible batteries • 5 planetary gears • FIXTEC - spindle lock + keyless chuck • 20 stage torque adjustment • Ergonomic Softgrip on rear handle • QUICKSTOP motor-brake • 2 x 18V, 2.4Ah reversible batteries • 5 planetary gears • FIXTEC - spindle lock + keyless chuck • 20-stage torque adjustment • Ergonomic Softgrip on rear handle • QUICKSTOP motor-brake B2E16RLD • Triple reduction gearing • Internal slip clutch • Soft start switch • Motor overload protection • Built-in water swivel • Versatile through the high torque & blow energies • Fast tool changing with the FIXTEC system • Roto-stop facility for light chiselling • Angle of chisels can be set through the variolocking system for best handling • Available in 300/600, 450/900 & 600/1200rpm models • Large and small base stands are also available to suit • Also available in 26mm (750W) & 30mm (1010W) capacity Impact Drills PD2E20R Rotary Hammers - L Shape PLH32XE • Also available in 750W, 850W and 1010W • Also available in Chipping Hammer and in 40mm (1005W) Rotary & Demolition Hammers - Upright Kango 950 Screwdrivers TKSE2500Q • Heavy duty 705W percussion drill • Synchromesh gears • Keyless chuck • Reverse operation • Variable speed • 32mm Rotary Hammer with chiselling function • 900 Watt Industrial Motor • 3.8 Joules Impact Force • Anti Vibration Technology • 0 - 800 rpm • SDS + Fitting • 1700 Watt Motor creating a 27J Impact Force • 3 Handles, All with Anti Vibration Technology • 125 - 250 rpm • In-Line Motor for Greater Operator Comfort • Safety Clutch Protects Operator and Tool • Full Wave Electronics Can Be Used With Generators • Also available as demolition hammers in 1800W (27J), 1400W (24.5J), and 2200W (59.9J) • Variable Speed Reversing TEK-gun • 725 Watts • Metal Gearbox • Easy snap-on depth-setting nose cone • 0-2500 rpm • QUIK-LOK Cable • Also available in 4000rpm, 1200rpm and with a Sharpfire magazine (opt.) Impact Wrench IPWE400RQ • 400Nm of Torque • 725 Watts • Variable Speed, 0-1700 rpm • Lightweight 2.7 Kg • Reversible, with switch above the handle. All Milwaukee Electric Tools come with a 2 YEAR WARRANTY • Also available in 3/4" drive (520Nm) and 18V, 1/2" drive (325Nm), 14.4V Hex (85Nm) and 14.4V 1/2" drive (158Nm) Page 46 (Batteries and Chargers - 12 month warranty) United Tools National Catalogue 2006 Jigsaws FSPE110QX • 710 Watt motor • 110 mm cutting depth in timber. • Four-stage pendulum action • FIXTEC - Rapid blade change system • Die cast aluminium base plate • Extra large roller guide for greater accuracy • Also available in a 14.4V cordless version Sawzalls SSPE1000QX • 300mm cutting depth in timber • Oscillating action for fast cutting in timber • 0-2800 strokes per minute at 32mm • 32mm Stroke • Low Vibration through counter-balance mechanism • Also available in non-oscillating 1000W, 18V pivoting handle, and 18V D-handle versions Biscuit Joiner & Router PJ710 Circular Saws SCS65Q • 1900 Watt motor • 65mm cutting depth • Tilting handle with Softgrip for maximum comfort • 5800rpm • Great visibility and convenient adjustment levers • Also available - 18V wood & metal saws & 1800W compound mitre saw Sanders ROS150 • 710 Watt motor • 19mm cutting depth • 100 diameter cutter • 6 preset depth stops and 3 preset angle positions • Spindle lock • Easy to read markings and scales • Also available - 11/4hp plunge router • 450 Watt industrial motor • 150mm disc diameter • Oscillates 7mm every 5500rpm • Integrated dust extraction • All-metal gear drive Disc Sanders & Polishers AS12QE Wall Chasers & Dust Extractors WCS45 • Also available in 125mm, plus a delta sander & finishing sander • 178mm disc sander • 1200 Watt motor • 1800-4800 rpm • Thermal overload protection • Large comfortable trigger • Only 2.1 Kg • Also available as a polisher and 14.4 sander • 1900 Watt motor • 2 x 150mm blades • 45mm width and depth • Variable auto cutting width • Tilting handle with softgrip for maximum cutting comfort • Integrated dust extraction adaptor • Also available in 125mm & 230mm plusa 3600l/min dust extractor Angle Grinders - Barrel Grip AG8-100 Angle Grinders - Rear Handle AG23-230 • 100mm angle grinder • 750 watt motor • Patented spindle lock • Convenient safety switch • Quick action disc guard • 4m Quik-lok cable • Also available in 115mm, 125mm (1200W & 1500W) & variable speed 125mm • 230mm angle grinder • 2300 watt motor • Safety lock off deadman switch • Quick release disc guard • Patented safety spindle lock • Only 4.8kg • Also available in 180mm & 125mm (1200W & 1500W) Grinders - Die & Straight DGL30QE • 600 Watt motor • Precision spindle with double bearing • Metal gearbox • 10,000 - 30,000rpm • 1/4" collet • Also available without extension shaft plus two-handed version and 125mm straight grinder Shears & Nibblers S2.5Q • Sheet metal shear • 500 Watt motor • 2.5mm cutting capacity • 7m/min cutting speed • Four-sided reversible blades • Safety hand guard • Also available as a nibbler & slotting shear Magnetic Drill Stands MDE42 • 1200 Watt motor • 42mm max. broach diameter • 16mm max. solid bit diameter • 10,000N holding power at drill point • 300-640rpm (no load) • 11.5 Kg • Also available with 38mm capacity and with No3 Morse Taper (3 motor speed options) United Tools National Catalogue 2006 Page 47 INTRODUCING REVOLUTIONARY 28 VOLT LITHIUM-ION TECHNOLOGY 0730-37 CIRCULAR SAW 2 x 3Ah 28 Volt Lithium-Ion batteries Saw blade diameter: 165mm No load speed: 4200 rpm 50° bevel cuts All-metal guards with aluminium base plate 28V POWER AT 18V WEIGHT With V28 Lithium-Ion more power no longer means more weight. Weighing slightly less than a conventional 18V battery, V28 delivers up to twice the run-time and up to 50% more power, perfect for high current drain jobs. 0724-37 PERCUSSION DRILL 2 x 3Ah reversible 28 Volt Lithium-Ion batteries 85Nm torque Full load speed (1st/2nd gear): 0-600/0-1800rpm 0-9000 / 0-27,000bpm 13mm All-metal keyless chuck BATTERY FUEL GAUGE Milwaukee takes the guess work out of cordless tools. With its on-board fuel gauge feature, the V28 Lithium-Ion battery tells you how much more power you have to work with. 0779-37 IMPACT WRENCH 2 x 3Ah reversible 28 Volt Lithium-Ion batteries 0-1450 rpm 0-2450 ipm 440Nm of torque ½” square drive shank HASSLE FREE CHARGING Milwaukee’s V28 technology redefines down time. Equipped with a Performance Optimising Circuit, the V28 Lithium-Ion battery runs from efficiently, charges immediately and is ready to go back to work faster as they are not effected by extremes of temperature. 0737-37 BAND SAW Milwaukee’s V28 Lithium-Ion technology delivers up to twice the run time of 18V tools. Unlike NiCd or NiMH batteries, the V28 Lithium-Ion cells maintain consistent, fade-free power throughout the discharge cycle. The last use is as powerful as the first. EXTENDED RUN-TIME CONSTANT POWER 1 x 3Ah 28 Volt Lithium-Ion battery 0-225 / 0-350 rpm Cutting diameter: 120mm x 120mm Central motor for best balance LED light aids visibility 9 Kg in weight 0756-37 ROTARY HAMMER 2 x 3Ah 28 Volt Lithium-Ion batteries 3.2 Joules impact force 26mm concrete capacity SDS+ fitting Available mid-2006 0719-37 ® SAWZALL RECIP SAW 2 x 3Ah 28 Volt Lithium-Ion batteries Stroke rate: 0-2000/0-3000 spm 29mm stroke FIXTEC blade change system Gear protection clutch AWESOME POWE R &'k8dgYaZhh 9^\^iVa>beVXi9g^kZg Model No: EY7202GQW • Digital Clutch with auto shut off • 3 Speed (High/Medium/Low) • High Capacity 3.5Ah Ni-MH Battery • Variable Speed Control/Reversible • Compact Body (Length 167mm) • Light Weight (1.85Kg) • High Power (Max. 120 N~m) • 55 Min Charging System • Electric Brake • Ergonomic Design • Includes Extra Battery Pack 8dgYaZhh9g^aa VcY9g^kZgh 15.6V Cordless Drill & Driver Model No: EY6432GQKW • High Capacity 3.5Ah Ni-MH Battery • Compact Body (Length 208mm) • Light Weight (2.2Kg) • High Power (31.9 N~m) • Variable Speed Control/Reversible • 18-Stage Clutch Plus Drill Position • 13mm Heavy-Duty Keyless Chuck • 2 Speed Gearbox • 55 Min Charging System • Electric Brake • Ergonomic Design • Includes Extra Battery Pack 12V Cordless Drill & Driver Model No: EY6432GQKW • High Capacity 3.5Ah Ni-MH Battery • Compact Body (Length 208mm) • Light Weight (1.9Kg) • High Power (22.6 N~m) • Variable Speed Control/Reversible • 18-Stage Clutch Plus Drill Position • 13mm Heavy-Duty Keyless Chuck • 2 Speed Gearbox • 55 Min Charging System • Electric Brake • Ergonomic Design • Includes Extra Battery Pack HeZX^Va^hiIddah 2.4V Cordless Drill & Driver Model No: EY503B • Converts from Straight to Pistol Form • 1 Hour Charging System • 2 Speed Gearbox • 6.5mm Hex Drive • Multi-Stage Clutch Plus Drill • Reversible • Gear Lock Mechanism for Manual Tightening Page 50 3.6V Cordless Drill & Driver Model No: EY6225CQ • ‘Auto Shut-Off Clutch’ extends battery life by immediately stopping rotation once selected torque setting is reached • Powerful: 1.5 N~m (at low speed) • 22-Stage Clutch • 6.5mm Hex Quick Connect Chuck • 15 Minute Charging System • Easily Converts from Straight to Pistol Form United Tools National Catalogue 2006 ')k8dgYaZhh GdiVgn=VbbZg Model No: EY6813NQKW SDS-plus • High Capacity 3.0Ah Ni-MH Battery • Dual Function-Rotary Hammer & Drill • Variable Speed Control / Reversible • Two Speed Hammering / Drilling Selection • Slow Start Switch for Accurate Drilling with a Clean Finish • Ergonomic Soft Rubber Grip for Stress Reduction • 360º Auxilary Side Handle with Built-in Depth Guage • Dust Collection Cup (EY9X004E) as Standard Equipment • 45min. Charging System • 3/4’ SDS-plus Bit System • Includes Extra Battery Pack &-k8dgYaZhh =VbbZg9g^aa$9g^kZg Model No: EY6813NQKW SDS-plus • High Capacity 3.5Ah Ni-MH Battery • Compact Body (Length 255mm) • Light Weight (2.7kg) • High Performance (Max.torque35Nm - Max.capacity ø50mm with low speed) • High Speed Brick/Masonry Drilling (Max.1,550rpm/28,000bpm) • Ergonomic Balanced Tool Body • 65min. Charging System • Variable Speed Control / Reversible • 13mm Heavy-Duty Keyless Chuck • Sure-Grip Support Handle • Includes Extra Battery Pack 8dgYaZhhHZVa^c\<jc 7.2V Cordless Sealing Gun Model No: EY3654CQ • Accepts both Cartridge and Sausage Material up to 600ml • Electric Operation to Reduce User Fatigue • Drip Prevention Mechanism for a Clean Finish • • • • Electric Speed Control 20min. Charging System Compact Battery Pack Two Types of Plunger &-kLddY8dbWd@^i OTHER PANASONIC CORDLESS COMBO KITS AVAILABLE. ASK IN-STORE. Model No: EYC155GQW • 18V Wood Cutter (EY3551GQ) + Standard Wood Cutter Blade • 18V Reciprocating Saw (Ey3544GQK) + Standard Reciprocating Saw Blade • • • • 18V Hammer Drill & Driver (EY6950) 18V Flashlight (EY3796B) Charger for Ni-MH Battery Pack 2 x High Capacity 3.5Ah Ni-MH Battery Packs + Carry Case To view the full range of Panasonic Cordless Powertools visit: www.panasonic.com.au