Sharp AH-X10BE Specifications Download

Transcript
E-MANUAL
22-2
Purpose
Adjustment/Setting/Operation data check
Function (Purpose) Used to check the total number of misfeed
and troubles. (When the number of total
jam is considerably great, it is judged as
necessary for repair.)
Section
The paper jam, trouble counter value is displayed.
Machine JAM counter
RSPF JAM counter
Trouble counter
22-3
Purpose
Adjustment/Setting/Operation data check
Function (Purpose) Used to check misfeed positions and the
misfeed count of each position.
* Presumption of the faulty point by this
data is possible.
Section
Operation/Procedure
The paper jam and misfeed history is displayed from the latest one
up to 50 items. (The old ones are deleted sequentially.)
22-4
Adjustment/Setting/Operation data check
Purpose
26cpm/36cpm/31cpm(A) machine
S/N
Operation/Procedure
MACHINE JAM
RSPF JAM
TROUBLE
WATER MARK
ESCP
PDL
PCI
Operation manual (HDD storage)
(except 20cpm machine)
Watermark (HDD storage)
ESCP font ROM
PDL font ROM
PCI
UICONTENTS
ICU (MAIN)
ICU (BOOT)
ICU (SUB)
LANGUAGE
GRAPHIC
PCL (MAIN)
PCL (PROFILE)
PCU
SCU
FAX1 (MAIN)
DESK
LCC
FINISHER
PUNCH
NIC
POWER-CON
E-MANUAL
WATER MARK
ESCP
ACRE (MAIN)
ACRE (DATA)
PCI
Serial No. (The codes for November and December are
"X" and "Y" respectively.)
Content data for display
ICU (Main section)
ICU (Boot section)
ICU (Sub section) (ARM9)
Language support data version
Graphic data for LCD
PCL (Main section)
PCL (Color profile)
PCU
SCU
FAX 1-Line (Main section)
Desk unit
LCC
Finisher
Punch module
NIC
Power controller
Operation manual (HDD storage)
Watermark (HDD storage)
ESCP font ROM
Enhanced compression kit (Main section)
Enhanced compression kit (Data section)
PCI
Function (Purpose) Used to check the trouble (self diag) history.
Section
22-6
Operation/Procedure
Purpose
The trouble history is displayed from the latest one up to 30 items.
(The old ones are deleted sequentially.)
Function (Purpose) Used to output the setting/adjustment data
(simulation, FAX soft switch, counter), the
firmware version, and the counter list.
Adjustment/Setting/Operation data check
Section
22-5
Operation/Procedure
Purpose
Others
Function (Purpose) Used to check the ROM version of each
unit (section).
* When installing or servicing, this simulation is executed to print
the adjustment data and set data for use in the next servicing.
(Memory trouble, PWB replacement, etc.)
Section
1)
Firmware
Select the print list mode with 10-key.
Operation/Procedure
Item/Display
The ROM version of the installed unit in each section is displayed.
When there is any trouble in the software, use this simulation to
check the ROM version, and upgrade the version if necessary.
A
DATA PATTERN
2
3
18cpm/20cpm/23cpm/31cpm(G) machine
S/N
ICU (MAIN)
ICU (BOOT)
ICU (SUB)
LANGUAGE
GRAPHIC
PCL (MAIN)
PCL (PROFILE)
PCU
SCU
FAX1 (MAIN)
DESK
FINISHER
NIC
POWER-CON
Print list
mode
1
Serial No. (The codes for November and December are
"X" and "Y" respectively.)
ICU (Main section)
ICU (Boot section)
ICU (Sub section) (ARM9)
Language support data version
Graphic data for LCD
PCL (Main section)
PCL (Color profile)
PCU
SCU
FAX 1-Line (Main section)
Desk unit
Finisher
NIC
Power controller
2)
Print content
Firmware version,
counter data, etc.
SIM50-24 data
Data related to the process control
Press [EXECUTE] key to start printing the list selected in step
1).
MX-3610N SIMULATION 5 – 23