Download Makita ANGLE SANDER 9040L Specifications
Transcript
Air Compressors The compressors listed here have been carefully selected to form a complete range covering the majority of home, semi-professional and professional users. Whether it be airbrushing, spraying, stapling/ nailing, screwdriving, drilling or a host of other applications there is a compressor here to fit the bill. All of our compressors are manufactured to high quality standards and will give excellent performance and reliability. All the receivers are fully tested and conform to all current safety standards. Each unit comes with a full 12 months warranty and all the receivers are individually certificated. The range is backed up by an excellent spares and after sales service. We are often asked for advice from customers when choosing a compressor. Our two main pieces of advice are firstly, always look at the free air delivered by the compressor, not the piston displacement and, secondly make sure that the output of the compressor exceeds the consumption of the tool or tools. Some manufacturers quote just the piston displacement and this can mislead the unwary into believing they are purchasing a compressor with a larger capability than they are actually getting. Provided that the free air delivery from the compressor exceeds the requirement of the air tool you should not have the problem of running out of air halfway through a job. The alternative, of course, is to buy the biggest compressor at the outset on the basis that you will then have sufficient capacity for larger tools in the future. 3 Axminster Air AWC10HP Compressor Axminster Air AWC20HP Compressor The AWC20HP is an economically priced single cylinder oil lubricated unit with a 1.4kW high efficiency motor. The cast iron pump cylinder provides long term durability. Producing 5cfm @ 40 psi and 4cfm @ 90 psi compressed air delivery into a 24 litres air receiver. Fitted with wheels and a grab handle for easy mobility. Receiver and outlet pressure gauges are fitted along with an outlet pressure regulator. It is suitable for a whole range of general workshop uses such as small size nailing and stapling, riveting, greasing, dusting, tyre inflation, airbrushing and touch-up spraying. The only jobs which are beyond its capabilities are the use of the larger continuously running tools such as sanders, drills and polishers, all of which will need a more powerful compressor coupled to a larger capacity tank. The outlet is fitted with a 1/4” BSP female quick release fitting. A small, direct drive, oil lubricated, ducted air cooled, portable compressor. Great in the workshop or around the home for low volume air tools such as air staplers and nailers, air brush painting, occasional tyre inflation etc. Quite a robust little unit with a cast iron cylinder for long life. Twin pressure gauges monitor receiver and output pressures. Supplied with four rubber feet, top grab handle for easy mobility, output pressure control valve and a 1/4” BSP female quick release fitting. Inc.vat Ex.vat Code AWC10HP Compressor 230V £99.95 £83.29 501083 AWC20HP Compressor 230V Inc.vat £114.95 Ex.vat £95.79 Code 951816 Comparison Chart - Air Compressors Bambi Synthetic Oil Compressor Oil Synthetic compressor oil for all Bambi oil lubricated compressors. Greatly enhances the lubrication protection levels of these compressors, ensuring long service life and minimal oil consumption. Specialist compressor oil which meets the demands of all of our compressors. High viscosity, low carbon forming, anti-corrosion agent and conforms to all latest DIN specifications. Supplied in a one litre bottle. Compressor Oil 1 litre 120 Inc.vat £6.95 Ex.vat £5.79 Call 03332 406406 03_ Compressors 114_127.indd 120 Model Rating Power Free Air Delivered Code 200610 Synthetic Compressor oil 1 litre Inc.vat £34.94 Ex.vat £29.12 Code 951512 Max Pressure Noise Level Receiver Volume Oil Capacity Supply Requirements Overall L x W x H Weight AWC10HP Hobby 750W(230V) @40psi - 3.5cfm, @ 90psi - 2.4cfm 115psi (8 Bar) 70dB 6 litres 100ml 10Amps 515 x 240 x 465mm 14.5kg Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95 29/11/2013 11:58 Air Compressors Axminster Air AWC30HP Compressor A compact yet powerful unit, the AWC30HP, features a twin cast iron cylinder oil lubricated and ducted air cooled pump, which is directly driven by a 2.2kW motor. The 50 litre tank is very quickly re-charged and has a variable output pressure regulating valve and gauges for monitoring output pressure and tank pressure. The noise level is noticeably unobtrusive and subdued so should not annoy any neighbours. Very portable as it is supplied with two decent wheels and a convenient grab handle. Able to drive all air tools except the highest air demanding sanders and spray guns, this is an excellent medium sized machine for most home workshops, arts and crafts, cabinet making and general woodworking. Supplied with a 1/4” BSP female quick release fitting. AWC30HP Compressor 230V Inc.vat £219.95 Ex.vat £183.29 Code 501274 Axminster Air AWBD3050 Compressor A traditional belt drive workshop compressor, built for hard work over long periods. Quiet running and easy to move around, this machine will suit many workshop applications. Its 50 litres receiver is ideal for continuous nailing, stapling, running small sanders, small batch spraying and many other tasks. With oil lubricated cast iron cylinders for long pump life, this machine will give many years of good service. It is equipped with a receiver pressure gauge, output pressure gauge and out regulator valve. Includes a 1/4” female quick release fitting. AWBD3050 3hp Compressor 230V Inc.vat £299.94 Ex.vat £249.95 Bambi BB24V Compressor With noise levels around 40dB(A) and almost no vibration the Bambi BB24V can be located anywhere in the workshop without causing any intrusion. The vertical design takes up very little space whilst the 24 litre receiver is charged to 8 bar ensuring plenty of air is available for nailing, stapling, airbrushing and operating pneumatic systems. Standard features: Internally coated air receiver, Clearview oil level check, Easy to use oil filler plug and 10 micron outlet filter and adjustable pressure regulator. A 3 year receiver warranty ensures peace of mind. A favourite for educational work, exhibitions stands and front of shop use, indeed anywhere compressed air is required, silently. Bambi Compressor 230V Inc.vat £369.95 Ex.vat £308.29 Code 340648 Code 501275 3 Axminster Air AWBD30100 Compressor Sharing the same motor and pump unit from the AWBD3050 compressor, this model has a 100 litre receiver tank to give twice as much stored air capacity. This allows some demanding tasks that need a greater volume of high pressure air to be carried out. The same facilities as found on the AWBD3050 model are also found here. i.e. receiver and output pressure gauges, adjustable output pressure, decent sized pneumatic tyres and a grab handle. Whilst not as compact as the 50 litre version, the extra capacity can be very handy at times. AWBD30100 3hp Compressor 230V Filters & Regulators A range of industrially-rated air control units for lubricating, filtering and controlling the air supply from the compressor to the air tool. They all have mounting brackets supplied and the filter units have a spring loaded drain vent at the bottom. N.B. All the units have 3/8” BSP female tappings. Suitable adaptors can be found under Threaded Airline Fittings. Inc.vat Ex.vat Code Filter/Reg c/w Gauge £44.94 £37.45 800405 Air Filter £25.94 £21.62 800404 Inc.vat £349.94 Ex.vat £291.62 Code 501276 In Line Disposable Air Filters These in-line filters, with their centrifugal action and built in filter, will make all the difference to a sprayed finish. Used in conjunction with a tank mounted air filter they should give up to 10 days of trouble free spraying. 1/4” BSP female fitting at one end, 1/4” BSP male at the other. Please note that the filters are sold in pairs. In-line Filters (2) Inc.vat £4.74 Ex.vat £3.95 Code 010033 AWC20HP Trade 1.4kW (230V) @ 40psi-5.0cfm, @ 90psi-4.0cfm AWBD30100I Trade 2.2kW (230V) @ 40psi - 5.7cfm, @ 90psi - 4.5cfm AWBD3050I Trade 2.2kW (230V) @ 40psi - 5.7cfm, @ 90psi - 4.5cfm AWC30HP Trade 2.2kW (230V) @ 40psi-7.4cfm, @ 90psi-5.7cfm 115psi (8 Bar) 94dB 24 litres 300ml 10 Amps 570 x 300 x 590mm 22kg 115psi (8 Bar) 96dB(A) 100 litres 1,200ml 10Amps 1,250 x 500 x 740mm 79kg 115psi (8 Bar) 96dB(A) 50 litres 1,200ml 10Amps 1,050 x 460 x 740mm 58kg 115psi (8 Bar) 95dB(A) 50 litres 700ml 10 Amps 950 x 390 x 690mm 40kg Order online axminster.co.uk/compressors 03_ Compressors 114_127.indd 121 Bambi HT24-2P Oil Free Compressor This is a variation of the well established Bambi BB24V, having the same frame and receiver but fitted with a high volume, twin cylinder oil free pump unit. Providing a greatly increased air flow volume, this machine offers a great balance of performance with what is still a low noise level at 59dB(A). The other major difference is that the air supplied is completely oil free, making it suitable for those demanding applications not easily resolved before. The air cooled pump reduces the weight making this compressor even more portable. Receiver and output pressure gauges are provided, rubber feet provide noise and vibration dampening. This is a top quality high specification compressor, able to provide air supply solutions to many different applications. Standard features: Internally coated air receiver plus 10 micron outlet filter and adjustable pressure regulator. A 3 year receiver warranty ensures peace of mind. Inc.vat Ex.vat Code HT24-2P Compressor 230V £469.94 £391.62 211930 BB24V Industrial 375W(230V) @ 1 Bar - 40 L/Min, @ 5 Bar - 34 L/Min, @ 8 Bar - 31 L/Min 115psi (8 Bar) 40dB 24 litres 600ml 13 Amps 400 x 400 x 540mm 28kg HT24-2P 550W(230V) @ 1 Bar - 117 L/Min, @ 5 Bar - 82 L/Min, @ 8 Bar - 56 L/Min 115psi (8 Bar) 59dB(A) 24 litres 13Amps 400 x 400 x 530mm 15kg 121 29/11/2013 11:59 Air Hoses Airline Fittings The best way to connect up your compressed air system is to use bayonet quick release airline fittings at both the compressor and tool ends of the air hose; the fittings are easy and safe to use and allow for quick interchange of tools and hoses. The diagram below shows the recommended layout of the system - please note that the spring loaded quick release fittings should be fitted to the compressor and to the tool end of the hose so that the air is contained when either the hose or the tool are disconnected. The swivelling fittings, 410251 male and 410250 female, are highly recommended for fitting to the air tool, as they give greater flexibility in operating the tool as well as preventing snags and twisted airlines. 8mm bore nitrile hose with crimped-on 1/4” BSP male fittings on both ends in a choice of two lengths and supplied with the necessary quick release fittings to attach to a compressor and air tool. Inc.vat Ex.vat Code 7.5m c/w QR Fittings £27.95 £23.29 100350 15m c/w QR Fittings £38.45 £32.04 100348 Jubilee Clips Key to Fittings: A - 100311 Female Thread Quick Release. The most useful type of clip, made for securing hoses, flexible pipes and many other uses. B - 100314 Female Thread Bayonet (or 410250 swivelling) Inc.vat Jubilee Hose Clips 9.5 to 13mm Clip (Pkt 5) £2.94 51 to 70mm Clip (Pkt 3) £3.05 95 to 115mm Clip £1.55 Flexible Clip Driver £13.44 C - 100313 Male Thread Bayonet (or 410251 swivelling) Nylon Coiled Air Line 3 8mm Bore Air Hose With Threaded Ends Coiled 1/4” bore nylon hose in a choice of 7.5m(25’) or 15m(50’) lengths. Each comes complete fitted with a female quick release fitting at one end for coupling to an air tool and a male bayonet for direct connection to a compressor at the other. Inc.vat Ex.vat Code Coiled Air Line 7.5m £5.45 £4.54 200149 Coiled Air Line 15m £6.44 £5.37 200150 Airline Reel A good quality 3/8” bore PVC/ Nitrile hose sold by the metre. Also available are the appropriate end fittings which push into the hose and are secured with hose clips. 100316 gives a 1/4” BSP male fitting and 100315 allows the male bayonet to fit into a quick release fitting. If a quick release female coupling is required then fit the 100316 to the hose and screw on the quick release coupling 100311. Inc.vat £33.44 Ex.vat £27.87 Code 310372 Flexible Driver for Jubilee Hose Clips Flexible driver with a hexagon socket at the end. The quick and safe way to tighten up your clips. Inc.vat Ex.vat Code Flexible Clip Driver £13.44 £11.20 510405 Inc.vat £23.95 £34.96 Air Tool Oil 1 litre Inc.vat £13.44 Ex.vat £11.20 Code 200611 Ex.vat £19.96 £29.13 Call 03332 406406 Code 100349 100347 Particularly useful for air nailers and similar tools which require a small but regular amount of lubrication. Fitted with 1/4” BSP threads, male on one end, female on the other. In-Line Lubricator Inc.vat £3.95 100311 100312 100313 100314 100315 A range of airline fittings that can be used to make up special hoses or to set up your compressor with quick release airline fittings. Inc.vat Ex.vat Code 1/4” BSP Female Coupling £3.05 £2.54 100311 1/4” BSP Male Coupling £3.35 £2.79 100312 1/4” BSP Fitting £1.34 £1.12 100313 1/4” BSP Female Bayonet £1.55 £1.29 100314 3/8” Hose End-Male Bayonet £1.55 £1.29 100315 Swivelling Quick Release Airline Fittings 410251 These 1/4” swivelling quick release fittings allow a much greater level of flexibility where the hose joins onto the back of the tool. Not only do they swivel all around but they rotate as well, avoiding snagged and twisted airlines. These top quality fittings are chrome plated and polished and are available with either male or female 1/4” BSP 410250 fittings one end and male quick release style quick fit connector, on the other. Inc.vat Ex.vat 1/4” BSP Male £6.74 £5.62 1/4” BSP Female £6.74 £5.62 Code 410251 410250 Hose Air Line Fittings General purpose 3/8” air line fittings for joining lengths of airline hose and for attachment to air tools and equipment. 3/8” Hose End-1/4” BSP 3/8” Hose Joiner 9.5 to 13mm Clip (Pkt 5) 100316 100317 Inc.vat £2.15 £2.24 £2.94 Ex.vat £1.79 £1.87 £2.45 Code 100316 100317 510396 Threaded BSP Airline Fittings These BSP fittings are used with the 3/8” bore hose to enable a variety of connections to be made. Inc.vat Ex.vat Code 1/8” BSP Male - 1/4” BSP Male £1.44 £1.20 610021 1/4” BSP Male Joiner £1.39 £1.16 100318 3/8” BSP Male - 1/4” BSP Male £1.74 £1.45 610022 1/2” BSP Male - 1/4” BSP Male £2.04 £1.70 610023 1/4” BSP Female Joiner £1.74 £1.45 500006 1/2” BSP Female - 1/4” BSP Female £3.44 £2.87 500007 1/4” BSP Female - 3/8” Female Joiner £2.84 £2.37 110388 1/4” BSP Female - 1/8” BSP Male £1.74 £1.45 500081 1/4” BSP Female - 1/4” BSP Male £1.74 £1.45 500083 1/4” BSP Female - 3/8” BSP Male £1.85 £1.54 500084 1/2” Male-1/4” BSP Female £2.45 £2.04 500085 T Piece 1/4” BSP Male £2.94 £2.45 100319 PTFE Tape Twin Pack An essential item for plumbing and compressed airline systems. Seals threaded joints and also allows easy dismantling at a later stage should circumstances make it necessary. Twin pack 2 x 12m x 12mm wide. In-Line Lubricator 8mm bore nitrile hose with crimped-on 1/4” BSP male fittings on both ends in a choice of two lengths. 03_ Compressors 114_127.indd 122 Code 340238 100316 100315 100311 510396 A high quality lubricating oil specially designed for use with air tools and supplied in a one litre bottle. 8mm Bore Air Hose 122 Ex.vat £1.21 £1.79 £1.29 £2.54 £2.45 Air Tool Oil • Self-retracting for neat and efficient working • 7.5m of 8mm OD hose • Fitted with 1/4” BSP ends • Max working pressure 200psi Air Hose 8mm x 7.5m Air Hose 8mm x 15m Inc.vat £1.45 £2.15 £1.55 £3.05 £2.94 Lubrication Self-Retracting Air Hose Air Hose 7.5m Code 510396 510401 410486 510405 Air Hose PVC/ Nitrile Hose Only (per mtr) 3/8” Hose End-1/4” BSP 3/8” Hose End-Male Bayonet 1/4” BSP Female Coupling 9.5 to 13mm Clip (Pkt 5) • 20 metres of high pressure airline stored on a hose reel • Fibre reinforcement gives 12 bar working pressure • Separate hose with rotary seal for connection to compressor • Much longer life than loose airline hose • Supplied with Quick Release bayonet fittings • Top quality, made in Germany Inc.vat Ex.vat Code Airline Reel 20m £47.94 £39.95 110163 Ex.vat £2.45 £2.54 £1.29 £11.20 Quick Release Airline Fittings Ex.vat £3.29 Code 810253 PTFE Tape Twin Pack Inc.vat £0.74 Ex.vat £0.62 Code 506055 axminster.co.uk/signup for our exclusive email offers 29/11/2013 12:00 Spray Guns Air Tool Starter Kit An economical package of spray gun and air accessories for general purpose use around the workshop. Kit comprises spray gun, tyre inflating gun with pressure gauge, air duster, degreasing gun, hose and PCL quick release fittings. For all compressors listed with a 2hp motor or bigger. (Fitting 1/4” BSP male). Inc.vat Ex.vat Code Spray Gun Kit £33.95 £28.29 100309 Bulk Spray Guns Axminster AS1020 Low Pressure Spray Gun Axminster AS1070 2 Litre Spray Gun An inexpensive, low pressure spray gun with an 800cl capacity cup and 0.7mm nozzle; for basic spraying use with any small compressor with a 1hp rating or above. Uses a maximum air delivery of 1 - 3cfm, free air delivered at 10 - 40psi. The constant air bleed through the gun cannot be switched off, other than by disconnection from the compressor. Inc.vat Ex.vat Code Low Pressure Spray Gun £28.94 £24.12 340291 A handy sized bulk spraying unit with a 2 litre tank and a high quality spray gun, a real boon to those who have a need to spray large areas with paint, stains, varnishes and other materials. Air is fed from the compressor to the pressure controller and then on to the spray gun to atomise the paint which is in turn fed to the gun through a second hose connected to the top of the paint pot. The pressure gauge fitted to the controller gives a good degree of control over the spray pattern. The hose length is 1.8m(6’). Important Note: This spray system is not suitable for use with Xylene or Cellulose paints. If, however, there is a possibility of using these types of paint an additional delivery hose should be purchased. Inc.vat £99.95 £69.95 AS1070 2 Litre Spray Gun Delivery Hose 8mm x 4m Ex.vat £83.29 £58.29 Code 340292 292000 3 Axminster AS1070 10 Litre Spray Gun Axminster SG215 Mini Touch Up Gun A handy little spray gun, useful for spraying small areas of work or modelling projects. Can handle almost all finishes including water based acrylic enamels. Easy to use and comfortable, especially in the smaller hand. Fitted with a stainless steel paint flow needle, air fan control, paint regulator and 125ml suction feed cup. 1/4” BSP male inlet fitting. Takes quick release bayonet fitting 100314 or 410250 (swiveling). Inc.vat Ex.vat Code SG215 Spray Gun £21.95 £18.29 200228 Axminster AS1040 Spray Gun A good general purpose spray gun, well balanced and with finely adjustable fluid and air controls. Locking cup and safety lever make this gun a good choice for a quality finish. 1/4” BSP male inlet fittings. For quick release bayonet fitting use 100314 or 410250 (swivelling). Inc.vat Ex.vat Code AS1040 Spray Gun £54.95 £45.79 100308 Axminster Spray Gun Cleaning Kit Keep your spray gun in tip-top condition. The cleaning kit comes in a neat plastic case and comprises the following: 6 piece precision needle kit for gun nozzles, a handle for the needles, a 3 piece precision end bush set and a handle to suit. Numerous brushes include a nylon stiff bristle parts brush, 5 piece mini spiral brush set, a brass spiral brush, 6mm and 12mm nylon spiral brushes and a long handle spiral brush. Also in the case is a precision oiler. Inc.vat Ex.vat Code Spray Gun Cleaning Kit £23.94 £19.95 100211 Comparison Chart - Spray Guns Model Rating Inlet Operating Pressure Air Consumption Nozzle Type of Feed Cup Capacity DIY Kit Hobby 1/4” BSP 35 - 50psi 3 - 5cfm 1.5mm Gravity 130ml AS1080 10.2 Litre Spray Gun AS1080 Replacement Gun Delivery Hose 8mm x 4m Inc.vat £189.95 £62.94 £69.95 Ex.vat £158.29 £52.45 £58.29 Code 340293 340294 292000 Comparison Chart - Bulk Spray Guns SG215 Light Trade 1/4” BSP 40 - 70psi 2-5cfm 0.5mm Gravity 125ml AS1020 Hobby 1/4” BSP 10 - 40psi 1 - 3cfm 0.7mm Pressure 800cl Order online axminster.co.uk/compressors 03_ Compressors 114_127.indd 123 This bulk spraying kit with its 10.2 litre capacity pressurised paint pot and high performance spray gun is a real boon for those who have a need to spray large areas with paint, stains, varnishes and other materials. Air is fed to the pressure controller from the compressor (minimum airflow 10 cfm) and then on to the spray gun to atomise the paint which in turn is fed to the gun through a second hose connected to the top of the paint pot. The pressure gauge fitted to the controller gives a good degree of control over the spray pattern. The length of the two hoses is 3.7m(12’). Important Note: This spray system is not suitable as delivered for use with Xylene or Cellulose paints. If, however, there is a possibility of using these types of paint an additional delivery hose should be purchased. 1/4” BSP male fitting. AS1040 Trade 1/4” BSP 40 - 80psi 10 - 12cfm 1.6mm Suction 1 Litre Model Rating Inlet Operating Pressure Air Consumption Nozzle Type of Feed Cup Capacity AS1070 Trade 1/4” BSP 30 - 50psi 9.8 - 12.7cfm 0.8mm Pressure 2 Litre AS1080 Trade 1/4” BSP 50 - 80psi 10 - 12.5cfm 0.8mm Pressure 10 litre 123 29/11/2013 12:00 Section Professional Spray Equipment Apollo Pro-Spray 1500-3s A British made High Volume Low Pressure unit designed for the serious sprayer, this model has a powerful 1,500 watt 3 stage turbine and the ability to handle all types of coatings. The turbine housing is all steel and powder coated to withstand the everyday knocks and scuffs on-site or in the workshop. The 6 metre air hose with brass couplings is rugged enough for everyday use. The externally mounted air filter is easy to check and change when required. Included with this machine is the professional ANB300 Proline aluminium spray gun with several key features. This is a “non bleed” gun, meaning that the air shuts off when the trigger is released, reducing dust lift. A stainless steel needle set (1.3mm is supplied as standard), essential with the new generation of water-borne coatings. Smooth trigger action for accurate application control. Ergonomic, stay-cool handle unit for all day comfort. Adjustable fan pattern from horizontal to vertical plus and additional spot controller for super fine detail work. This powerful spray unit has been designed with the professional sprayer, looking for the highest possible finish whatever the application. Inc.vat Ex.vat Code Pro-Spray 1500-3 230V £349.94 £291.62 210615 3 Fuji Mini-Mite 3 and 4 Turbine Units & T70 Spray Guns Fuji Semi-Pro2 HVLP Spray System To meet the growing demands of the home, hobby and craft markets, Fuji has introduced the Semi-Pro2 HVLP spray system. Key features found on no other entry level system are standard, such as a powerful 1,400W 2-stage motor turbine and the Fuji M-Model spray gun. This is a non-bleed design of gun with a fan control knob to adjust the spray pattern from small circular to a wide fan (and all increments in-between). Light in weight with a cool handle, this is supplied as a suction gun with a 1,000cc cup, but a smaller 400cc gravity cup kit can be purchased as an option. The nozzle and needle are stainless steel; other air caps are available as optional extras. The turbine unit is in a sturdy steel cabinet complete with a grab handle and handy gun storage. External air filters are easy to wash or change. Includes a full 7.6m hose with Quick Connect Coupler and an Air Control Valve. This is a lightweight machine ideally suited to serious DIY, crafts or hobbies. Supplied with comprehensive user manual, viscosity cup, cleaning brush and wrench. Everything except the paint! Semi-Pro2 Spray System 230V Inc.vat £324.95 Ex.vat £270.79 Code 501285 Accessories Fuji Semi-Pro2 Pressure Tubes Pressure tubes with check valves for the M-Model spray gun. If these become blocked it would be worth soaking in the appropriate thinners for 30 mins before replacing. In packs of 5, one version for suction pots, the other for gravity feed pots. Please note, fits M-Model spray guns only. Pressure Tubes Suction M-Model Pressure Tubes Gravity M-Model Inc.vat £14.94 £14.94 Ex.vat £12.45 £12.45 Code 501292 501293 The Fuji Mini-Mite 3 and 4 models are a replacement for the previous Mini Mite model. It has a three or four stage turbine power unit and 7.6m (25’) of 3/4” bore hose. It is similar in most respects to the Q3/4 models but without the cost of the Q’s noise deadening package. Despite this, the Mini-Mite models are really as quiet as any comparable HVLP system on the market. Most finishes can be sprayed, including inks, stains, lacquers, varnishes, enamels, acrylics and so on, although some will have to be thinned before use. Included with the unit is Fuji’s very comprehensive guide which covers all aspects of HVLP spraying in great detail. You will need to choose either a suction or gravity fed T70 spraygun. The major advance of the newly designed T70 spray gun is an adjustable Spray Pattern Control. This allows the adjustment of the spray pattern whilst spraying if required, allowing complete accuracy of the pattern to suit the task. The T70 sprayguns come supplied with a 1.4mm aircap as standard, which should cover the majority of applications. Four alternative sized aircaps are available for special applications. More info on the T70 sprayguns is available on these pages. Mini-Mite 3 Suction Feed Spray Gun Mini-Mite 3 Gravity Feed Spray Gun Mini-Mite 4 Suction Feed Spray Gun Mini-Mite 4 Gravity Feed Spray Gun Inc.vat £444.95 £444.95 £529.96 £529.96 Ex.vat £370.79 £370.79 £441.63 £441.63 Code 717477 717478 717479 717480 Comparison Chart - Professional Spray Equipment Model Rating Power Noise Level Nozzle Hose Length Overall L x W x H Weight 124 Pro-Spray 1500-3s Industrial 1.5kW 78dB(A) 1.3mm 6m 425 x 365 x 415mm 14kg Call 03332 406406 03_ Compressors 114_127.indd 124 Semi-Pro2 Hobby 1.4kW 230V 76dB(A) 1.3mm (Std) 7.6m 420 x 370 x 420mm 11kg Mini-Mite T70 Trade 1.5kW 73dB(A) @ 6 meters 1.4mm (Std) 7.6m 430 x 370 x 430mm 12kg Fuji Q Gold T70 Pro HVLP Industrial 1.5kW 59dB(A) @ 6 meters 1.4mm (Std) 7.6m 400 x 430 x 470mm 18kg Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95 29/11/2013 12:01 Professional Spray Equipment Section Fuji T70 Spray Guns Fuji Q3 and Q4 Gold Pro Turbine Units & T70 Spray Guns The Fuji Q3 and Q4 Pro systems consists of a three or four stage turbine power unit fitted with Fuji’s unique quiet technology, which reduces the noise level by 50%. Because the air delivery pressure is low, an excellent finish can be achieved without the mess and wastage which usually results from excessive overspray. Most finishes can be sprayed, including inks, stains, lacquers, varnishes, enamels, acrylics and so on, although some will have to be thinned before use. Included with the unit is Fuji’s very comprehensive guide which covers all aspects of HVLP spraying in great detail and 7.6m(25’) of 3/4” bore hose. You will need to choose from either version of the new non-bleed T70 spray guns, either suction or gravity fed, which have the advantage that the airflow through the gun ceases when the trigger is released, and which also have a Spray Pattern control knob, which gives accurate control of the paint flow. Supplied with a 1.3mm aircap as standard, which should cover the majority of applications. Alternative sized aircaps are available for special applications. More info on the T70 sprayguns is available on these pages. Q3 Gold Pro Turbine Unit & T70 Suction Feed Spray Gun Q3 Gold Pro Turbine Unit & T70 Gravity Feed Spray Gun Q4 Gold Pro Turbine Unit & T70 Suction Feed Spray Gun Q4 Gold Pro Turbine Unit & T70 Gravity Feed Spray Gun T70 Series Suction Spray Gun T70 Series Gravity Spray Gun Inc.vat £214.94 £214.94 Ex.vat £179.12 £179.12 Code 505155 505156 Fuji HVLP Air Caps Finest 0.7mm (.027”), (0.8mm 0.031” M model)size Aircap Set for finest atomization. Suitable for inks, shading, mist coats and spray tanning. Fine 1mm (.039”) size Aircap Set for finer atomization. Suitable for most water-based lacquers and shading. Standard 1.4mm (.055”) (1.3mm .055” M-Model) is installed in all Xpc spray guns. Aircap Set is perfect for most fine finishing. Inc.vat Ex.vat Code Medium output 1.5mm (.60”) Aircap Set for slightly heavier coats with standard paints. £549.95 £458.29 717481 High output 1.8mm (.070”) Aircap Set for faster coverage of large areas with any type of paint. £549.95 £458.29 717482 £679.96 £566.63 717483 £679.96 £566.63 717484 The Fuji T-Series Spray Gun features an exclusive side-mounted pattern control knob to adjust the size of the fan. This knob allows you to switch from a small to large pattern, or anywhere in between. Unlike HVLP turbine spray guns with the front collar adjustment, the pattern control knob offers full incremental fan size throughout the whole range.The fan pattern is adjustable from 1” to 15” from a distance of 8”. Smaller than 1” is achieved by moving closer to the object to be sprayed. All T-Series Spray Guns are installed with a 1.3mm needle and nozzle set-up. You can obtain a professional finish with all known coatings. The gun body is CNC machined to aircraft tolerances. All Fuji spray guns are non-bleed. Air passes through the spray gun only when the trigger is pulled. The light weight of the T-Series and easy-pull trigger means less fatigue for the operator. Features include: • Centre mounted 600cc gravity cup or 950cc bottom feed cup versions available • A stay-cool nylon handle (fitted over a metal tube) • Stainless steel fluid passages and an external needle packing adjustment • Metal fluid knob and collar, stainless steel internal components • Rear rotating nipple for pressure tubes makes for easier adjustment especially for those who are left-handed Extra High output 2.2mm (.086”), (2.0mm, 0.78” m model). Great for spraying large surfaces such as walls with emulsions. Expect some slight texture. Needles 211963-211967 are for Xpc guns only, needles 501286501291 are for M-Model guns only. 3 0.7mm (.027”) Air Cap (Inks, Shading) 1mm (.039”) Air Cap (Lacquers, Shading) 1.4mm (.055”) Air Cap (Fine Finishing) 1.8mm (.070”) Air Cap (Paint, Varnish) 2.2mm (.086”) Air Cap (Exterior Paints) Inc.vat £47.94 £47.94 £47.94 £47.94 £47.94 Ex.vat £39.95 £39.95 £39.95 £39.95 £39.95 Code 211963 211964 211965 211966 211967 Accessories Fuji T70 Series Air Caps • Sizes from 0.8mm (.030”) to 2.5mm (.135”) • The smallest is suitable for inks, shading and mist coats • The largest is great for spraying large surfaces or textured coatings • For T70 Series spray guns only, does not fit older spray guns Inc.vat Ex.vat Code 0.8mm (0.030”) Inks, Shading, Spray Tanning £54.95 £45.79 505158 1.0mm (0.039”) Lacquers, Shading, Water Based Coatings £54.95 £45.79 505159 1.3mm (0.051”) Standard Fine Finishing, General Purpose £54.95 £45.79 505160 1.5mm (0.060”) Fine Finishing, Lacquers, Enamels, Polurethanes, Latex £54.95 £45.79 505161 1.8mm (0.070”) Paint, Varnish, Fast Finishing £54.95 £45.79 505162 2.0mm (0.078”) Exterior Paints, Splatter Paints, Emulsions £54.95 £45.79 505163 2.5mm (0.135”) Stone Finishes, Industrial Undercoats, Fast Emulsion Finishing £54.95 £45.79 505164 Fuji T70 Series Gravity Cups • Optional or replacement gravity feed cups for T70 Series spray guns • Choice of 600cc or 950cc sizes T70 Series 600cc Gravity Cup T70 Series 950cc Gravity Cup Inc.vat £43.94 £49.94 Code 505167 505168 • Allows the user to fill the gravity feed cup without assistance • Rest your Fuji Gravity Spray Gun while you are refilling the cup or in-between coats • Will also fit other standard size gravity spray guns Gravity Feed Gun Holder Stand Fuji T70 Series Gravity Cup Parts Kit • Service kit of parts for both 600cc and 950cc gravity feed cups • For T70 Series spray guns only Inc.vat Ex.vat Code 600/950cc Gravity Cup Parts Kit £23.94 £19.95 505157 Order online axminster.co.uk/compressors 03_ Compressors 114_127.indd 125 Ex.vat £36.62 £41.62 Fuji Gravity Feed Gun Holder Stand Inc.vat £12.44 Ex.vat £10.37 Code 505165 Ex.vat £12.45 Code 505166 Fuji 600 & 950cc Gravity Cup Gaskets (Pack 5) • Replacement gaskets for gravity cups, pack of 5 T 70 Series Gravity Cup Gaskets (pk5) Inc.vat £14.94 125 29/11/2013 12:03 Air Brushing Spraycraft Air Brushing Accessories Air Brush Filter Regulator Inc.vat £25.44 Filter Regulator Ex.vat £21.20 Code 510047 SprayCraft SP10 Easy To Use Airbrush Polyvine Acrylic Enamel Paint Axminster Air CP101 Air Brush Compressor A small 1.5cfm oil-less diaphragm compressor driven by a 90W induction motor. Quiet and exceptionally portable, the CP101 is suitable for use with most small air brushes and air brush kits. Supplied complete with 1/8” BSP outlet and 1/8 BSP” to 5mm adaptor and moulded 13A plug. N.B. This compressor is only suitable for use with air brushes. CP101 Compressor 230V Inc.vat £89.94 Ex.vat £74.95 Code 400313 3 Axminster Air CP103 Air Brush Compressor with Reservoir Tank 510041 CP103 Compressor 230V Inc.vat £149.94 Ex.vat £124.95 Code 400314 Comparison Chart - Air Brush Compressors Model CP101 CP103 Rating Hobby Trade Power 90W (230V) 90W (230V) Max Pressure 35psi 35psi Outlet 1/8 BSP 1/8 BSP Overall L x W x H 280 x 210 x 160mm 400 x 130 x 350mm Weight 4.3kg 7.7kg 126 Call 03332 406406 03_ Compressors 114_127.indd 126 510050 Air Brush Fittings A small 1.5cfm oil-less diaphragm compressor driven by a 90W induction motor. Quiet and exceptionally portable, the CP103 is suitable for use with most small air brushes and air brush kits. Supplied complete with a 3.5 litre air reservoir tank, this gives a much smoother flow of air to the brush so that a better finish can be achieved. Complete with a 1/8” BSP outlet and 1/8” BSP to 5mm adaptor and moulded 13A plug. N.B. This compressor is only suitable for use with air brushes. Inc.vat £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £1.44 £3.14 £3.14 £3.14 £3.14 £3.14 £3.14 £3.14 £3.14 £3.14 Metallic Gold 20ml Metallic Silver 20ml Antique Bronze 20ml Baltic Blue 20ml Brunswick Green 20ml Black 20ml Bright Red 20ml Emerald 20ml French Blue 20ml Matt Flesh 20ml Brown 20ml Ferrari Red 20ml Ivory 20ml Lime 20ml Matt Black 20ml Matt White 20ml Orange 20ml Matt Lemon 20ml Matt Primer 20ml Pink 20ml Purple 20ml Sea Blue 20ml Satin Varnish 20ml White 20ml Tan 20ml Yellow 20ml Metallic Gold 100ml Metallic Silver 100ml Brunswick Green 100ml Black 100ml Bright Red 100ml French Blue 100ml Matt Black 100ml White 100ml Yellow 100ml Ex.vat £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £1.20 £2.62 £2.62 £2.62 £2.62 £2.62 £2.62 £2.62 £2.62 £2.62 510049 510038 510051 1/8” BSP Female - 1/8” Hose 1/8” BSP Male - 1/8” BSP Male Adaptor 1/4” BSP Female - M5 M 1/8” BSP Male - M5 F 1/4” BSP Male - 1/8” BSP Female 1/8” BSP Female - M5 Male Code 952523 952524 952525 952526 952527 952528 952529 952530 952531 952532 952533 952534 952535 952536 952537 952538 952539 952540 952541 952542 952543 952544 952545 952546 952547 952548 952549 952550 952551 952552 952553 952554 952555 952556 952557 Ex.vat £1.95 £1.79 £1.45 £1.62 £2.29 £1.62 Code 510041 510050 510038 510049 510051 510040 Inc.vat £15.44 Ex.vat £12.87 Code 504965 SprayCraft SP10K Easy To Use Airbrush Kit • Perfect for the beginner • Single action trigger to regulate airflow and for ease of use • Air and paint mixed outside the airbrush for easy cleaning • Spray pattern approximately 12.5mm • Comes with airbrush, hose and propellant adaptor fitted • 300ml air propellant included SP10K Inc.vat £22.94 Ex.vat £19.12 Code 504964 Accessories SprayCraft Airbrush Stand Airbrush Stand Inc.vat £15.44 Ex.vat £12.87 Code 504982 Inc.vat £5.64 £7.74 Ex.vat £4.70 £6.45 Code 504977 504978 SprayCraft Universal Airbrush Propellant A universal airbrush propellant available in 300ml and 500ml cans which does away with the need for a compressor. Suitable for use with SprayCraft, Aztek, Badger, Revell and most other popular airbrushes. Please note: this product can only be shipped to UK mainland. Air Brush Hoses A choice of two airline hoses; 510044 - 4mm o/d plastic with M5 female fittings and 510046 - 7mm o/d braided rubber hose with 1/8” BSP female fittings. Plastic Hose with M5 Ends Braided Hose with 1/8” BSP Ends SP10 An airbrush stand helps you keep the working area tidy and clean. It swivels, rotates and clamps securely to your workbench or desk. Holds two airbrushes. 510040 Inc.vat £2.34 £2.15 £1.74 £1.94 £2.75 £1.94 The SP10 is perfect for those looking to get started with airbrushing. You will have little problem spraying large areas as this airbrush is capable of producing a quick, broad coverage as well as more detailed work when used with stencils and masking tape. This airbrush can be used with most paints, acrylics, enamels, inks and lacquers. It has an easy-to-operate on/off trigger, an ergonomic grip and easy snap- on/off paint jars, making it quick to change colours. The SP10 airbrush comes with hose, propellant adaptor, paint jar, compressor adaptor and cleaning wire. Inc.vat £3.14 £9.24 Ex.vat £2.62 £7.70 Code 510044 510046 300ml 500ml axminster.co.uk/signup for our exclusive email offers 29/11/2013 12:04 Spraycraft Air Brushing Section SprayCraft SP60 Universal Dual Action Airbrush Set SprayCraft SP20 Airbrush The SP20 is both easy to use and maintain with three separate tips allowing differing spray patterns for fine, medium or broad strokes. It can be used with most paints, acrylics, enamels, inks and lacquers and is suitable for a wide range of applications from automotive touch-up to hobby work. It has a single action trigger with the air and paint mixed outside the airbrush making it easy to clean. The SP20 includes hose and propellant adaptor, 3 x easy change tips, 1 x 1/2 oz paint jar and compressor adaptor. Inc.vat £29.45 SP20 Ex.vat £24.54 Code 504966 SprayCraft SP20K Airbrush Kit • 3 easy change tips for fine, medium and broad strokes • Single action trigger to regulate airflow and for ease of use • Air and paint mixed outside the airbrush for easy cleaning • Spray pattern range from 0.8 to 38mm • Kit comes with SP20 airbrush, hose and propellant adaptor fitted • 300ml air propellant included Inc.vat Ex.vat Code SP20K £38.94 £32.45 504967 SprayCraft SP35 Gravity Feed Dual Action Pro Airbrush A professional standard airbrush which is gravity fed and is excellent for very fine detail work. Includes a 2cc fluid cup with lid. Inc.vat Ex.vat Code SP35 £78.95 £65.79 504970 SprayCcraft SP30 Top Feed Airbrush & Compressor Set SprayCraft SP50K Dual Action Airbrush Kit Inc.vat £58.94 3 A single action gravity feed airbrush and mini compressor with three power settings and airbrush holder. It has a 2cc gravity fed colour cup and has a spray pattern of 1.6 to 30mm. The compressor is mains powered, has three pressure settings and is extremely quiet. The kit contains SP30 airbrush, mini compresor and hose with fittings. • Internal dual mix airbrush • For fine detail and larger coverage work • Can be used for a wide range of applications • Fine dot spray pattern • Spray pattern approx. 1.6 - 38mm SP50K The SP60 airbrush set is a professional standard piece of equipment that is equally useful to the enthusiast. It is both a gravity and syphon fed airbrush which is capable of fine and broader coverage work. The set includes SP60 airbrush, 7cc metal gravity feed cup, 22cc glass syphon feed bottle and 80cc plastic syphon feed bottle. Inc.vat Ex.vat Code SP60 £99.95 £83.29 504969 Ex.vat £49.12 Code 504968 SP30 Inc.vat £97.94 Ex.vat £81.62 Code 504971 SprayCraft Acrylic Airbrush Paint These acylic paints can be used with airbrushes, paint brushes, pens or rollers. They are available in a variety of colours and can be used on metals, plastics, glass, paper, canvas, wood, leather, fabrics, ceramics and clay. SprayCraft Acrylic Airbrush Paint Set A primary colour set of 6 acrylic paints. They come in 32ml bottles and can be used with airbrushes, paint brushes, pens and rollers. Colours included are red, blue, yellow, green, black and white. They can be used on metals, plastics, glass, paper, canvas, wood, leather, fabrics, ceramics and clay. Inc.vat £24.95 Set of 6 Paints Ex.vat £20.79 Code 504975 Process Yellow 32ml Orange Yellow 32ml Violet 32ml Ultramarine Blue 32ml Turquoise 32ml Brilliant Green 32ml Ochre 32ml Burnt Orange 32ml White 32ml Black 32ml Bright Red 32ml Silver 32ml Gold 32ml Copper 32ml Sepia 32ml Inc.vat £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 £4.94 Ex.vat £4.12 £4.12 £4.12 £4.12 £4.12 £4.12 £4.12 £4.12 £4.12 £4.12 £4.12 £4.12 £4.12 £4.12 £4.12 Code 504984 504985 504986 504987 504988 504989 504990 504991 504992 504993 504994 504995 504996 504997 504998 SprayCraft Airbrush Cleaning Pot SprayCraft Airbrush Cleaner Perfect for cleaning residual paints from airbrushes. This jar allows you to clean the airbrush in a safe manner, just by pressing the brush into the nozzle and spraying into the jar. A filter then stops any fumes from entering the atmosphere. The airbrush cleaner is a must for every airbrush user. It can be used to clean all parts of an airbrush. Size of can: 150ml. Please note: this product can only be shipped to UK mainland. Inc.vat £4.94 150ml Ex.vat £4.12 Code 504981 Cleaning Pot 3x 22cc jars with screw-on metal lids for use with the SP50 airbrush and other similar dual action airbrushes. Inc.vat Ex.vat Code Set of 3 Jars £4.94 £4.12 504979 SprayCraft Set of 4 Jars For SP10 and SP20 2x 1/2oz and 2x 1oz jars with screw-on metal lids for use with the SP10 and SP20 airbrushes. Set of 4 Jars Inc.vat £5.64 Ex.vat £4.70 Code 504980 Inc.vat £3.35 Ex.vat £2.79 Code 504806 ModelCraft Dropper Bottles A pack of 4x 17ml empty bottles. Suitable for storing paints for modelling and air brushing. Inc.vat £19.94 Order online axminster.co.uk/compressors 03_ Compressors 114_127.indd 127 SprayCraft Set of 3 Jars (SP50) Ex.vat £16.62 Code 504976 4 Pack 17ml Bottles 127 29/11/2013 12:06 Section Trade Air Tools Axminster Professional Tyre Inflator Axminster B41 Air Caulk-Mastic Gun Axminster Air 10mm Reversible Drill This heavy duty air drill is fitted with 10mm capacity Jacobs keyed chuck. Rugged machined alloy casing and protective rubber grip give it a very durable build quality. Ball bearings are used throughout and a planetary gearbox provides the necessary speed reduction. Fitting very nicely in the hand, with a forward/ reverse selection by the flick of a switch. A 1/4” BSP quick release bayonet fitting is provided. Please refer to the Airlines Fittings section for details of suitable airlines and fittings. Specifications Model Rating No Load Speed Inlet Operating Pressure Air Consumption Weight 3 Reversible Air Drill 10mm Reversable Drill Trade 2,200rpm 1/4” BSP 90psi 4.5cfm 1.2kg Inc.vat £38.94 Ex.vat £32.45 If you have ever dispensed more than half a tube of mastic around windows or frames you will appreciate the simplicity and convenience of this very simple gun. At the touch of the trigger air pressure is applied to the back of the cartridge and out comes a very even flow of material. Be warned, however, that if the pressure is too high it tends to come out rather quickly! Suitable for use with virtually any small compressor fitted with a reservoir. Saves a lot af arm ache! The tool is supplied with a 1/4” BSP bayonet connector. Please refer to the Airline Fittings section for details of suitable airlines and fittings. Model B41 Rating Trade Inlet 1/4” BSP Operating Pressure 90psi Air Consumption 6cfm Weight 1.1kg Mastic Gun Inc.vat £20.94 Ex.vat £17.45 Code 340448 Code 501165 Inc.vat £12.24 Ultra Comfort Safety Goggles Ex.vat £10.20 R15 Trade 1/4” BSP 90psi 0.03cfm 1.5kg Model Rating Inlet Operating Pressure Air Consumption Weight Air Riveter Kit Inc.vat £81.95 Ex.vat £68.29 Code 800435 Pop Rivets A high quality lubricating oil specially designed for use with air tools and supplied in a one litre bottle. Air Tool Oil 1 litre 128 Inc.vat £13.44 Ex.vat £11.20 Call 03332 406406 03_ Compressors 114_127.indd 128 Code 200611 JSM-5130 Trade 20,000 rpm 1/4” NPT 90 psi 4cfm 0.75kg JSM-5130 1/4” Air Die Grinder JSM-5252 1/4” Angle Die Grinder Inc.vat £65.94 £69.95 Ex.vat £54.95 £58.29 Code 505061 505062 Specifications Code 310226 Air Tool Oil Part of the Jet “ERGO” range of high quality, light weight, low vibration tools, these die grinder’s are easy to control, allowing delicate tasks to be completed with ease. There is a choice of straight or 90° angled versions. The 1/4” collet allows many type of commonly available fittings to be used, enhancing the usefulness of this great tool. Supplied with 1/4” and 6mm collets. Model Rating No Load Speed Inlet Operating Pressure Air Consumption Weight A production rivet gun kit with four different rivet heads for blind rivets 3mm, 4mm and 5mm. The rivet is easily set with a pull on the trigger and without the risk of damaged knuckles. On the rear of the gun is a receiver which catches rivet shanks and stores them ready for later disposal. Supplied in a kit box with an impressive collection of rivets, jaws, noses, spare parts and tools. This gun will work on virtually any compressor with a reservoir tank. 1/4” BSP female fitting. One of our best selling googles, giving essential eye protection and ultimate comfort, having uvex ‘surpervision extreme’ technology meaning the lens cannot steam up. Protection for any activity involving tools and where there is a possible danger to your eyes. Chemical resistant, anti scratch, 100% UV protection and all round vision. The soft shroud adapts to face curves for a perfect seal, exceptionally comfortable and there is good side protection, even when worn with prescription spectacles. Class 1 polycarbonate lens, CE approved EN166 1B 349. Jet JSM-5130/5252 1/4” Die Grinders Specifications Axminster R15 Air Riveter Kit uvex Ultra Comfort Safety Goggles This is a rugged tyre inflator with a dial reading pressure gauge, more like the one you find at the local garage (or maybe even better!). With a large, clear gauge protected by a rubber housing, it reads in psi, kg/cm², kpa and bar. Cleverly, the gauge swivels to allow left or right handed use. It has a 1/4” BSP female fitting. For quick release couplings use 100313 or 410251 (swivelling). Inc.vat Ex.vat Code Professional Tyre Inflator £52.94 £44.12 505212 3, 4 and 5mm head diameter alloy Pop Rivets for maximum grip. Material lengths are 3mm(short), 6mm(medium) and 13mm(long). Supplied in boxes of 100 or 50. Rivets (Boxed in 100 or 50) Inc.vat Ex.vat Code 3mm Alloy Short (100) £1.94 £1.62 900086 3mm Alloy Medium (100) £1.94 £1.62 900085 3mm Alloy Long (100) £2.04 £1.70 900084 4mm Alloy Short (100) £2.24 £1.87 900089 4mm Alloy Medium (100) £2.45 £2.04 900088 4mm Alloy Long (50) £1.85 £1.54 701468 5mm Alloy Short (50) £1.94 £1.62 701471 5mm Alloy Medium (50) £2.04 £1.70 701470 5mm Alloy Long (50) £2.24 £1.87 701469 Jet JSM-7572/7472 Reversible Air Drills Part of the Jet’s “ERGO” range of high quality, light weight, low vibration tools, these air drills are easy to control, comfortable to use and can be used all day long. Both are fitted with top quality Jacobs industrial keyed chucks, the JSM-7572 a 3/8” chuck whilst the JSM-7472 has a 1/2” chuck. Both air drills have a trigger operated variable sped control and a thumb operated forward/reverse control. The 1/2” model has a side handle for extra control, especially useful when drilling sheet metal. Full ball bearing construction and a planetary reduction gearbox ensures reliability every day. Specifications JSM-7572/7472 Trade 1,800 rpm 1/4” NPT 90 psi 4cfm 1.5kg Model Rating No Load Speed Inlet Operating Pressure Air Consumption Weight JSM-7572 3/8” Air Drill JSM-7472 1/2” Air Drill Inc.vat £91.94 £109.94 Ex.vat £76.62 £91.62 Code 505063 505064 Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95 29/11/2013 12:07 Trade Air Section Tools Jet JSM-4540 3/4” Impact Wrench Jet JSM-4140/4341 Mini Impact Wrench’s Part of the Jet’s “ERGO” range of high quality, light weight, low vibration tools, these lightweight 3/8” and 1/2” impact wrench’s have an exceptional power to weight ratio and features twin hammers plus an easy-to-use torque setting system. Composite materials in the body construction ensure strength and light weight. The heavy duty air motor’s are completely reliable and highly durable. Perfect for use every day in the workshop. Specifications JSM-4140/4341 Trade 9,000rpm 1/4” NPT 90psi 4cfm 200ft/lbs 1.75kg Model Rating No Load Speed Inlet Operating Pressure Air Consumption Max Torque Weight JSM-4140 3/8” Impact Wrench JSM-4341 1/2” Mini Impact Wrench Inc.vat £137.94 £137.94 Ex.vat £114.95 £114.95 Code 505065 505067 Part of the Jet’s “ERGO” range of high quality, light weight, low vibration tools, this heavyweight 3/4” impact wrench really is a powerful tool with an exceptional power to weight ratio and features twin hammers plus an easy-to-use torque setting system. Composite materials in the body construction ensure strength and light weight. The heavy duty air motor is completely reliable and highly durable. This unit has an extremely high torque output, enough for just about any task. Perfect for use all day in the workshop. Specifications JSM-4540 Trade 5,500rpm 3/8” NPT 90psi 4cfm 1,400ft/lbs 4.0 kg Model Rating No Load Speed Inlet Operating Pressure Air Consumption Max Torque Weight JSM-4540 3/4” Impact Wrench Inc.vat £359.95 Ex.vat £299.96 Code 505068 Jet JSM-3330/3430 Ratchet Wrench’s Part of the Jet’s “ERGO” range of high quality, light weight, low vibration tools, these lightweight 3/8” and 1/2” ratchet wrench’s have exceptional power to weight ratios plus an easy-touse torque setting system. Composite materials in the body construction ensure strength and light weight. The heavy duty air motor is completely reliable and highly durable. Perfect for use every day in the workshop. Specifications JSM-3330 Trade 150rpm 1/4” NPT 90psi 4cfm 50ft/lbs 1.25kg Model Rating No Load Speed Inlet Operating Pressure Air Consumption Max Torque Weight JSM-3330 3/8” Air Ratchet Wrench JSM-3430 1/2” Air Ratchet Wrench Inc.vat £66.95 £66.95 Ex.vat £55.79 £55.79 3 Code 505071 505072 Air Dusters Jet JSM-8272/8372 Air Screwdrivers Jet JSM-4343 1/2” Impact Wrench Part of the Jet’s “ERGO” range of high quality, light weight, low vibration tools, this medium weight 1/2” impact wrench has an exceptional power to weight ratio and features twin hammers plus an easy-to-use torque setting system. Composite materials in the body construction ensure strength and light weight. The heavy duty air motor is completely reliable and highly durable. Perfect for use every day in the workshop. Specifications JSM-4343 Trade 7,000rpm 1/4” NPT 90psi 4.4cfm 600ft/lbs 2.5kg Model Rating No Load Speed Inlet Operating Pressure Air Consumption Max Torque Weight JSM-4343 1/2” Air Impact Wrench Inc.vat £149.94 Ex.vat £124.95 Code 505066 Part of the Jet’s “ERGO” range of high quality, light weight, low vibration tools, these screwdrivers are both light in weight and very comfortable in use. There is a choice of two models, high and low speed, both having a 1/4” Hex drive. There is an adjustable torque setting on both models, the slow speed model having an extra high level of torque available. The high quality air motor, variable speed trigger and convenient forward/reverse control all give positive control. Plenty of torque is available to handle even tough tasks. These drills will work tirelessly all day long. A lightweight air duster, manufactured from cast alloy. Perfect for occasional use at home. 1/4” BSP male fitting. For quick release coupling use 100314 or 410250 (swivelling). Air Duster Inc.vat £4.94 Ex.vat £4.12 Code 410075 Ex.vat £11.20 Code 310374 Specifications JSM-8272/8372 Trade 1,800rpm 1/4” NPT 90psi 4cfm 45-115 ft/lbs 1.25kg Model Rating No Load Speed Inlet Operating Pressure Air Consumption Torque Weight JSM-8272 Slow Speed Air Screwdriver JSM-8372 High Speed Air Screwdriver Inc.vat £82.94 £96.95 Order online axminster.co.uk/compressors 03_ Compressors 114_127.indd 129 Light Duty Air Duster Ex.vat £69.12 £80.79 Code 505069 505070 Axminster Heavy Duty Air Duster A nicely made cast alloy air duster. Has a 1/4” BSP female fitting. Comfortable and durable in use. For quick release coupling use 100313 or 410251 (swivelling). Air Duster Inc.vat £13.44 129 29/11/2013 12:08 Trade Air Tools Mirka RO325DB Mirka ROS325CV Mirka ROS325CV & RO325DB 77mm Random Orbit Sanders 3 The Mirka ROS325CV (Central Vacuum) and ROS325DB (Dust Bag) pneumatic random orbit sanders are fitted with a 77mm backing pad that has been specially developed for spot sanding of defects or sanding small furniture pieces. The ROS325CV model is fitted with Mirka’s central vacuum port, so that when the sander is connected to a suitable dust extraction system you are able to sand completely dust free. The ROS325DB model has a dust bag for those who do not have a vacuum extraction system; only compressed air is required for dust free sanding.These sanders fit neatly in the hand and are extremely light and balanced so can be used for long periods without the user tiring. The speed is exceptionally easy to control. A 2.5mm orbit guarantees a fine surface finish. If you are looking for sanding perfection in a smaller package then these sanders are for you. Full range of abrasives available, see Abrasives, Cleaners and Finishes section. ROS325CV 77mm Central Vacuum ROS325DB 77mm Dust Bag Inc.vat £144.95 £144.95 Ex.vat £120.79 £120.79 Code 501125 501126 Mirka ROS650DB Mirka ROS650CV Mirka ROS650CV & ROS650DB 150mm Random Orbit Sanders The Mirka ROS650CV (Central Vacuum) and Mirka ROS650DB (Dust Bag) are 150mm air powered random orbital sanders with a 5.0mm orbit. This style of sander has a huge reputation for fine finishing and Mirka products take the lead in this field. The ROS650CV is fitted with a central vacuum port which ensures completely dust free sanding when it’s connected to a suitable extraction system. The ROS650DB is fitted with a dust bag system which ensures completely dust free sanding without requiring connection to an extraction system. These sanders are extremely light in weight, very well balanced and can be used for long periods. The speed can be regulated through a range of 4-12,000rpm. Suitable for use on all kinds of surfaces and capable of a very fine finish. Perfect for large furniture, work surfaces and vehicle use. Full range of abrasives available, see Abrasives, Cleaners and Finishes section. ROS650CV 150mm Central Vacuum ROS650DB 150mm Dust Bag Inc.vat £129.95 £149.94 Ex.vat £108.29 £124.95 Code 501127 501128 Comparison Chart - Mirka Random Orbit Sanders Model Rating No Load Speed Noise Level dB @ 1M Operating Pressure Air Consumption Pad Size Weight 130 ROS325CV & ROS325DB Industrial 12,000rpm 80 6.2 bar 481 l/min 77mm 0.5kg Call 03332 406406 03_ Compressors 114_127.indd 130 ROS650CV & ROS650DB Industrial 12,000rpm 77 6.2 bar 481 l/min 150mm 0.8kg For Mirka Abrasives, please go to the Abrasives, Cleaners & Finishes Section axminster.co.uk/signup for our exclusive email offers 29/11/2013 12:09 Industrial SiteSection Nailers Axminster Air DA1564 15 Gauge Finish Nailer An industrial finishing nailer for both interior and exterior use. The non-marking tip device and the adjustable depth control make it just as good for fine furniture and upholstery work as it is for battening and framing. Easy loading of nails into the rear entry angled magazine coupled with the powerful nailing action make this a real time saver on site. The swivelling exhaust deflector and rubber grip handle makes for comfortable use. The nails are 34°, 15 gauge (1.8mm) with 3mm heads. The nailer will take nails with a minimum length of 15mm and a max of 50mm. The tool has a 1/4” male bayonet fitting. Lubricate regularly. Please refer to Airline Fittings section for details of suitable airlines and fittings. For quick release bayonet fitting use 100313 or 410251 (swivelling). Supplied in a plastic storage case. Inc.vat Ex.vat Code DA1564 15 Gauge Finish Nailer £94.94 £79.12 953416 Suitable for timber framing, roofing, joists and many other tasks, this gas powered nailer is a real time saver. Two batteries are provided, each will last up to 4,000 nails per charge. There is a builtin light to indicate low charge. Standard gas cartridges are used, each with a life of approximately 1,200 nails. This nailer is powerful but light to use, and able to drive 51-90mm 34° ring shanked nails into all timbers with ease. An adjustable depth control, full sequential action, effective air filters and a high temperature warning lamp all contribute to efficient use. A retractable rafter hook is a clever idea, saving an inadvertent and possibly terminal descent! With its Japanese built motor, this is a reliable tool for site or workshop use. N.B. Uses Makita nails and gas. Inc.vat Ex.vat Code GFN3490 Gas Nailer £284.94 £237.45 953497 Axminster GFN3490 Gas Frame Nailer BULK PRICING AVAILABLE on all nails and staples 15 Gauge Finish Nails - Box 4,000 Makita GN900SE Gas Nailer • Clipped head Li-Ion / gas nailer • 7.2V battery will fire up to 4,000 nails per charge • 40g gas cell fires up to 1,200 shots per cell • 34° nails firing 2-3 nails a second • LED low battery light, 30 minute battery charge • Error detection system • Free 3 year service plan included on tool registration Supplied with 2 x Li-Ion batteries, charger and a case. Inc.vat Ex.vat Code Gas Nailer £459.95 £383.29 210703 32mm 38mm 44mm 50mm Inc.vat £23.94 £27.95 £31.94 £35.94 Ex.vat £19.95 £23.29 £26.62 £29.95 Code 114014 114015 114016 114017 Inc.vat £39.95 £49.94 £65.94 Ex.vat £33.29 £41.62 £54.95 Code 114023 114024 114025 3 Galvanised Roofing Nails - Box 7,200 22mm 32mm 45mm 28 Degree Plain Shank Nails - Box 2,000 50mm x 2.8mm 65mm x 3.05mm 75mm x 3.05mm 90mm x 3.3mm Axminster Air FN2890D Framing Nailer Inc.vat £149.94 Ex.vat £124.95 Comparison Chart - Industrial Site Nailers DA1564 Model FN2890D Industrial Rating Industrial 1/4”BSP Inlet 1/4” BSP 100 Nails Load Capacity 84 Nails 70-120psi Operating Pressure 60-95psi Air Volume 7cfm Overall L x W x H 2.53kg Weight 3.5kg Code 200395 Makita GF600SE 2nd Fix Gas Nailer 50mm 60mm 75mm • Fasten cover strips, architrave, skirting and more in seconds • Fast fix with total control and a clean finish • Cordless using Li-Ion battery technology and gas • 7.2V battery will fire up to 4,000 nails per charge • Gas cell fires up to 1,000 shots per cell • Soft nose so work is not marked • Depth adjustable for the best finish • LED work light, 30 minute battery charge • Free 3 year service plan included on tool registration Supplied with 2 x Li-Ion batteries, spare soft nose, charger and case. Inc.vat Ex.vat Code GF600 2nd Fix Cordless/Gas Nailer £449.94 £374.95 503808 GFN3490 Trade 68 Nails 378 x 374 x 110mm 3.75kg GN900SE Industrial 44 Nails 3.5kg GF600SE Industrial 100 Nails 2.2kg *SAVE with a bulk discount – see online axminster.co.uk or call 03332 406406 03_ Compressors 114_127.indd 131 Ex.vat £18.29 £22.45 £24.12 £32.45 Code 340327 340328 340329 340331 28 Degree Galvanised Ring Shank Nails - Box 2,000 This is a heavy duty on-site-use nailer, just the job for trusses, decking, framing and sheeting. Exceptionally light and strong due to its magnesium alloy casing. The FN2890D Framing Nailer fires collated 28° clipped head nails from 50mm to 90mm with a diameter from 2.9mm minimum, to 3.3mm maximum. The nailer has a fast loading magazine with load sight and maximum capacity of 84 nails (2 strips). It’s handle has a rubberised grip for user comfort, especially useful for shock absorbing and a variable position air exhaust vent. Supplied with 2 triggers to allow single action firing only (to prevent a double firing) or the faster bump feed firing action. Also comes supplied in a sturdy case with safety goggles, service tools and lubrication oil. Please note that this nail gun requires a compressor capable of delivering 7cfm minimum. The tool has a 1/4” BSP female inlet; refer to the Airline Fittings section for details of suitable airlines and fittings. Framing Nailer Inc.vat £21.95 £26.94 £28.94 £38.94 Inc.vat £23.45 £24.44 £31.94 Ex.vat £19.54 £20.37 £26.62 Code 100073 100074 100075 Makita Nail and Gas Packs for Gas Nailers A range of 2.8mm and 3.1mm galvanised ring and smooth nails. Supplied in lengths: 51mm, 63mm, 75mm and 90mm. Available with the correct amount of gas per box of nails. Inc.vat Ex.vat Code 51 x 2.8mm Ring pkt 4000 + Gas £69.95 £58.29 501838 63 x 3.1mm Ring pkt 3000 + Gas £74.94 £62.45 501839 75 x 3.1mm Ring pkt 2000 + Gas £56.94 £47.45 501840 90 x 3.1mm Smooth pkt 2000 + Gas £59.94 £49.95 501841 131 29/11/2013 12:10 Section Air Nailers & Staplers Workshop With the increasing popularity of low cost portable compressors has come a big increase in the use of air powered nailers and staplers in the upholstery, craftwork, furniture making and building trades. They are relatively cheap to buy, convenient to use, very productive and, provided that sensible precautions are taken, long lasting and safe to use. A few safety and maintenance points to watch are: Tools should be lubricated regularly and care taken to ensure that the air pressure is correct and adjusted to suit the size of nail or staple. Excessive pressure will cause unnecessary strain on the firing pin. The firing pin should be regarded as a consumable part and a spare kept to hand. Nail guns use the spent air at the end of the stroke to return the piston or firing pin to the upper position and therefore, if the gun has been used on a discharged compressor, the piston may remain in the downward position. If this should occur, and it sometimes is unavoidable, especially when the unit is new and is not worn in, the gun should be removed from the supply and the firing pin returned manually to its normal resting position. If the firing pin should break after a jam, a new firing pin should be installed immediately to avoid any further damage. If you have problems operating one of our nail guns please contact our Specialist Sales Department who will be pleased to help. Always check for a broken firing pin before sending back for repair under warranty as this can easily be replaced without incurring postage or service charges. Axminster Air AWHP Headless Pinner This lightweight trade-rated air tool, which drives 23 gauge headless pins from 12mm to 20mm long, is great for furniture, mouldings, decorative trim and glazing beads. It has a 1/4” BSP female fitting and is suitable for use with smaller compressors. Supplied with a 1/4” BSP Quick Release bayonet fitting. Details of suitable airlines and fittings can be found in the Airline Fittings section. Inc.vat Ex.vat Code AWHP Headless Pinner £32.94 £27.45 010016 Replacement Firing Pin £4.44 £3.70 100140 Axminster Air AW50N 18G Brad Nailer 3 Axminster Air AW32NS Nailer Stapler This lightweight trade-rated machine will fire a choice of either 18 gauge T-headed nails 10-30mm or narrow crown staples in the range of 15mm to 32mm and with its low air consumption will work off one of the smaller 25 litre tank compressors. It can be used with standard trigger firing or in bump mode where, with the trigger depressed, a fixing is delivered each time the safety stop is depressed, useful for fast fixing. The gun is easy to load and has a re-load sight so that the operator can see when the magazine is empty. Other useful features are the depth adjustment which controls the depth to which the nail is driven, the adjustable air exhaust outlet and the quick release front cover to give easy access for clearing jammed nails. Supplied with a 1/4” BSP quick release bayonet fitting and a storage case. Details of suitable airlines and fittings can be found in the Airlines Fittings section. Inc.vat Ex.vat Code AW32NS Nailer Stapler Replacement Firing Pin £49.94 £6.24 £41.62 £5.20 340379 340380 A lightweight trade-rated nailer which fires 18 gauge T-headed nails from 15mm to 50mm in length and with low air consumption means that the nailer can be used with any of the smaller 25L capacity compressors. It can be used with standard trigger firing or in bump mode where, with the trigger depressed, a nail is delivered each time the safety stop is depressed, useful for fast fixing. The gun is easy to load and has a re-load sight so that the operator can see when the magazine is empty. Other useful features are the depth adjustment which controls the depth to which the nail is driven, the adjustable air exhaust outlet and the quick release front cover to give easy access for clearing jammed nails. A 1/4” BSP PCL bayonet fitting is provided in the back of the tool for either direct connection to the airline or, more conveniently, using quick release bayonet fittings. Details of suitable airlines and fittings can be found in the Airlines Fittings section. AW50N 50mm Brad Nailer Replacement Firing Pin Inc.vat £49.94 £6.14 Ex.vat £41.62 £5.12 Code 340382 340383 Axminster Air T50A 16G Brad Nailer This medium weight trade-rated nail gun fires 16 gauge T-headed brad nails from 20mm to 50mm in length. With its low air consumption, this nailer can be used with any of the smaller 25 litre capacity compressors. It can be used with standard trigger firing or in bump mode where, with the trigger engaged, a nail is delivered each time the safety stop is depressed, useful for fast fixing. The gun is easy to load and the handle has a high grip rubber covering. An adjustable exhaust air outlet means that the exhaust can be directed to where convenient. A 1/4” BSP quick release male bayonet fitting is provided in the back of the tool for direct connection to the airline. Details of suitable airlines and fittings can be found in the Air Hose section. Supplied in a plastic storage case. T50A 16 Gauge Brad Nailer Inc.vat £79.94 Ex.vat £66.62 Code 953415 Axminster Air AWMN Air Masonry Nailer A very impressive air operated masonry nailer which will drive hardened nails with ease into a whole variety of hard surfaces such as brick, light concrete, insulating blocks, screed and plaster. The range of nail length, from 18mm to 64mm and the 80 nail capacity quick loading magazine make it a natural for second fix work. There is the usual safety latching system and the air exhaust outlet can be rotated to the most convenient position. Light in weight, safe to use and extremely reliable, this nailer can save a huge amount of time on site as so many tasks can be done with just one tool. The tool has a 1/4” BSP female inlet; refer to Airline Fittings section for details of suitable airlines and fittings. For quick release bayonet fitting use 100313 or 410251 (swivelling). Inc.vat Ex.vat Code AWMN Masonry Nailer £84.95 £70.79 340392 Replacement Firing Pin £7.74 £6.45 340393 Comparison Chart - Workshop Air Nailers & Staplers Model Rating Inlet Load Capacity Operating Pressure Air Consumption - Weight 132 AWHP Trade 1/4” BSP 100 Nails 95psi 4cfm 0.8kg Call 03332 406406 03_ Compressors 114_127.indd 132 AW50N Trade 1/4” BSP 100 Nails 60 - 95 psi 4.5cfm 1.4kg T50A Trade 1/4” BSP 100 Nails 70 - 120psi 4.5cfm 2.1kg AW32NS Trade 1/4” BSP 100 Nails / Staples 60 - 95psi 3.5cfm 1.4kg AWMN Trade 1/4” BSP 80 Nails 85 - 115psi 5cfm 3.2kg AW422JA Trade 1/4” BSP 100 Staples 60 - 95psi 3.8cfm 1.3kg Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95 29/11/2013 12:10 Workshop Air Nailers & Staplers Section Axminster Air AW422J Narrow Crown Stapler A solidly made trade rated stapler, weighing in at 1.3kg, and suitable for long periods of continuous use. It uses 20 gauge (0.9mm) staples 5.1mm wide and in lengths from 10mm to 22mm. Perfect for upholstery, thin ply or hardboard fastening and thin T & G boards. A safety latch and exhaust air deflector are fitted. The stapler comes supplied with a 1/4” BSP bayonet; refer to the Airline Fittings section for details of suitable airlines and fittings. For quick release bayonet fitting use 100313 or 410251 (swivelling). Inc.vat Ex.vat Code Narrow Crown Stapler £39.95 £33.29 600515 Accessories BULK PRICING AVAILABLE on all nails and staples See online at axminster.co.uk or call 03332 406406 for details 24 Gauge Headless Pins - Box 10,000 12mm 15mm 18mm 20mm Axminster Air 6-22 Air Stapler 10mm 15mm 20mm 25mm 30mm 35mm 40mm 50mm This heavy duty model uses narrow crown 18 gauge staples 5.8mm wide in lengths from 16mm to 38mm long. Very good for applications such as stapling hardboard panels, thin ply, T & G boards, fencing panels etc. Supplied with safety latch and swivelling exhaust air vent. The tool comes supplied with a 1/4” BSP bayonet; refer to the Airline Fittings section for details of suitable airlines and fittings. Inc.vat Ex.vat Code 9040L Air Stapler £49.94 £41.62 200433 Airline Reel Inc.vat £13.44 Air Tool Oil 1 litre 6-22 Trade 1/4” BSP 100 Staples 65 - 95psi 4cfm 1.25kg Ex.vat £11.20 Code 200611 9040L Trade 1/4” BSP 100 Staples 60 - 100psi 4cfm 1.5kg A top quality 20m high pressure airline with fibre reinforcement capable of handling up to 12 bar working pressure all fitted onto a hose reel to keep everything nice and tidy. The hose reel is supplied with Quick Release fittings and a length of hose to connect directly to the compressor; this hose connects to the top of the reel handle and incorporates a rotary seal so that the hose can be pulled off the reel without tangling the connecting hose. The reel is supplied with hooks for wall mounting if needed, although the reel complete with hose only weighs in at 3.5kg, light enough to carry around the workplace. Supplied with crimped-on fittings ready to use straight out of the box. A top quality product, made in Germany. Airline Reel 20m Inc.vat £47.94 Ex.vat £39.95 Code 110163 *SAVE with a bulk discount – see online axminster.co.uk or call 03332 406406 03_ Compressors 114_127.indd 133 Inc.vat £3.14 £3.74 £4.94 £5.75 £6.95 £7.74 £8.45 £9.95 Ex.vat £2.62 £3.12 £4.12 £4.79 £5.79 £6.45 £7.04 £8.29 Code 340345 340346 340347 340348 340349 340350 340351 340352 3 Inc.vat £5.24 £5.94 £6.95 £8.75 Ex.vat £4.37 £4.95 £5.79 £7.29 Code 340317 340326 340330 340344 Inc.vat £12.24 £8.45 £9.74 £10.44 £12.44 Ex.vat £10.20 £7.04 £8.12 £8.70 £10.37 Code 900125 900127 900128 900130 900136 13 Gauge Masonry Nails Axminster Air 9040L Air Stapler A high quality lubricating oil specially designed for use with air tools and supplied in a one litre bottle. Code 502472 502473 502474 502475 16 Gauge T Head Nails - Box 2,500 25mm 32mm 38mm 50mm Air Tool Oil Ex.vat £3.95 £4.79 £5.62 £6.20 18 Gauge T Head Nails - Box 5,000 A solidly made trade rated stapler, weighing in at 1.25kg and suitable for long periods of continuous use. It uses 20 gauge (0.9mm) wide crown (11.2mm) staples and in lengths from 6mm to 22mm. Primarily used for upholstery, it can be used for many other similar trades. Supplied with a swivelling exhaust air vent. The tool comes supplied with a 1/4” BSP bayonet; refer to the Airline Fittings section for details of suitable airlines and fittings. For quick release bayonet fitting use 100313 or 410251 (swivelling). Inc.vat Ex.vat Code 6-22 Air Stapler £37.94 £31.62 100238 Accessories Inc.vat £4.74 £5.75 £6.74 £7.44 25mm (Box 2,000) 38mm (Box 1,000) 45mm (Box 1,000) 50mm (Box 1,000) 64mm (Box 1,000) 20 Gauge Narrow Crown Staples - Box 5,000 10mm 13mm 16mm 19mm 22mm Inc.vat £3.44 £3.84 £4.55 £5.15 £5.75 Ex.vat £2.87 £3.20 £3.79 £4.29 £4.79 Code 340338 340339 340340 340341 340342 20 Gauge Wide Crown Staples - Box 5,000 6mm 8mm 10mm 13mm 16mm 19mm 22mm Inc.vat £3.24 £3.54 £3.95 £4.55 £5.45 £6.14 £6.44 Ex.vat £2.70 £2.95 £3.29 £3.79 £4.54 £5.12 £5.37 Code 340310 340311 340312 340313 340314 340315 340316 18 Gauge Narrow Crown Staples - Box 5,000 16mm 19mm 22mm 25mm 32mm 38mm Inc.vat £7.74 £8.94 £9.74 £10.74 £13.44 £14.94 Ex.vat £6.45 £7.45 £8.12 £8.95 £11.20 £12.45 Code 340332 340333 340334 340335 340336 340337 133 29/11/2013 12:10