Download Appendix D

onto every track: just hold down the Option key while you are inserting the plug-in onto
the first track, and it will insert it onto every track of the same type. The Control/Clutch
Switch temporarily stops a control from acting as part of a group of controls. If you need
finer adjustment of any Pro Tools controls or automation breakpoints, simply hold down
the Command Switch while you adjust these and small increments will become possible.
002 Modes
The Digi 002 goes into Standby mode when you power it up, and it waits in this mode
until you either launch Pro Tools LE or switch to Standalone mode. When the Digi 002 is
connected to a computer with Pro Tools LE software running, it goes into Pro Tools
mode.
The Digi 002 can also be used as a stand-alone, eight-channel digital audio mixer—with
or without being connected to the computer. You can switch to Standalone mode either
from Standby mode or from Pro Tools mode and your computer is no longer needed for
Digi 002 to operate.
Standalone Mode
To put the Digi 002 into Standalone mode, just press the Standalone switch on the righthand side of the Digi 002 top panel and confirm that you want to enter Standalone mode
by pressing the Channel Select switch that is flashing under the word “Yes.” To exit
Standalone mode, simply press the Standalone switch a second time. Digi 002 either goes