Download Share a single xDSL/cable modem high-speed wireless

Transcript
Chapter 4: Advanced Functions
4.5 Configuration Backup and Restore
You can back up all configurations of this router to a file, so you can make several copies of router configuration for security.
To back up or restore router configuration, follow these instructions:
Click on “Tool” located at the upper-right corner of the Web management interface, then click on “Configuration Tools” on the
left of the Web management interface, and the following message will be displayed:
Figure 4-36. Backup and restore screen.
Table 4-14. Backup and restore options.
Item
Description
Backup Settings (1): Press the “Save...” button, and you’ll be prompted to download the configuration as a file. The
default filename is config.bin. You can save it as another filename for different versions and
keep it in a safe place.
Restore Settings (2): Press the “Browse…” button to pick a previously saved configuration file from your computer,
and then click on the “Upload” button to transfer the configuration file to the router. After the
configuration is uploaded, the router’s configuration will be replaced by the file you just
uploaded.
Restore to Factory
Default (3): Click on this button to remove all settings you made, and restore the router’s configuration
back to factory default settings.
Page 86
724-746-5500 | blackbox.com