Download DWC-BL5363D Manual
Transcript
Starlight BL5363D User Manual Version #2: Camera with ICON Menu 11192010 PRECAUTIONS Do not open or modify. Do not open the case except during maintenance and installation, for it may be dangerous and can cause damages. Do not put objects into the unit. Keep metal objects and flammable substances from entering the camera. It can cause fire, short-circuits, or other damages. Be careful when handling the unit. To prevent damages, do not drop the camera or subject it to shock or vibration. Do not install near electric or magnetic fields. Protect from humidity and dust. Protect from high temperature. Be careful when installing near the ceiling of a kitchen or a boiler room, as the temperature may rise to high levels. Cleaning To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe. Mounting Surface The material of the mounting surface must be strong enough to support the camera. FCC COMPLIANCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to Provide reasonable protection against harmful interference .when the equipment is operated in a residential environment. This equipment generates, uses, and radiates radio frequency energy; and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. WARNING: Changes or modifications are not expressly approved by the manufacture. TROUBSHOOTING Before sending your camera for repair, check the following or contact our technical specialist. No VIDEO Check the coaxial cable and make sure it is connected securely. Check the lens’ iris adjustment at the menu setup of the camera. Check the power supply and make sure the camera has the proper voltage and current. Out-of-Focus VIDEO Check the clear dome cover and the lens for dirt or fingerprints. Use a soft cloth and gently clean. Check the lens manual focal and zoom adjustment. Field test monitor is recommended. FEATURES 1/3” Sony Super HAD II CCD High Resolution 560 TV Lines 2.8~11mm Varifocal Auto Iris Lens Electronic Day and Night Star-Light (Super Low Light Technology) DRC (Dynamic Range Compressor) Dark spots in images particularly become more visible without overexposing the bright spots to create one perfect image. 3D-DNR (3D Digital Noise Reduction) Produces less noise and more color during low-light application. HME (Highlight Mask Exposure) Masks overly exposed light to produce a true video image of any environment. BLC (Back Light Compensation) Programmable Privacy Zone (6) & Motion Detection Easy Icon Driven OSD Menu with Built-In Joystick Auto Sensing 12VDC or 24VAC with Line Lock No Fog or Condensation under Any Weather Condition DIMENSION (mm) & POWER REQUIREMENT POWER REQUIREMENT: 12VDC @1A 24VAC @ .500mA Power Wire Maximum Distance Wire Gauge 12VDC 24 AWG 80ft 22 AWG 128ft 20 AWG 203ft 18 AWG 323ft 16 AWG 514ft 14 AWG 816ft 12 AWG 1295ft 10 AWG 2057ft COAXIAL CABLE TYPE MAXIMUM DISTANCE RG59/ U RG6/U RG11/U 750feet 1,000feet 1,500feet 24VAC 323ft 513ft 815ft 1295ft 2056ft 3264ft 5183ft 8228ft INSTALLATION AND ADJUSTMENT INSIDE THE BOX 1. 2. 3. 4. 5. 6. 7. 8. 9. Digital Watchdog Ball Dome Camera Zoom & Focus Adjustment Tool Four (4) Wood Screws One Security L-Key Security Lock Screw Zoom & Focus Seal Covers Quick Connect & Disconnect Power Connector User Manual Secondary BNC Cable for a Field Monitor INSTALLATION OSD CONTROL EXPOSURE LENS DC (0~100) / MANUAL / VIDEO. (DC Lens is recommended.) SHUTTER 1/160 /1/100 / FLC / 1/250 ~ 10000 / SENS-UP x2 ~ x250 BLC OFF / ON BLC (Back Light Compensation) AGC HIGH / MIDDLE / LOW / OFF AGC (Auto Gain Control) MAX-DR OFF / ON (0 ~ 20) (Electronic Wide Dynamic Range) STAR-LIGHT AUTO (x2 ~ x250) / OFF (x32 is recommended.) EXIT JUMP EXIT / SAVE&EXIT / FACTORY RESET COLOR WB MODE AWC / ATW / MANUAL / PUSH LOCK R-Y GAIN 0 ~ 100 B-Y GAIN 0 ~ 100 DAY & NIGHT AUTO / COLOR / BW / EX-CONT Day & Night Mode COLOR ---- BW : Switching from color to BW; if the number is higher, the camera will only switch during a super low light condition. BW ---- COLOR : Switching from BW to color; this number should always be lower than COLOR to BW Read Time: Time interval to switch from Color to Black-and-White COLOR B&W: (BURST:OFF/ON) When the burst is OFF will make less noise C-SUP Color Suppression :Color will be reduced at low illumination, if the C-SUP Level is higher. 0 ~ 100 (Not Available when DNR is On.) A-SUP Aperture Suppression: The sharpness of the edges will be reduced at low illumination, if A-SUP Level is higher. 0 ~ 100 (Not Available when DNR is On.) EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET FUNCTION MIRROR OFF / MIRROR / V-FLIP / ROTATE SHARPNESS 0 ~ 31 GAMMA 0.05 ~ 1.00 / USER FREEZE OFF / ON NEGATIVE OFF/ ON 3D-DNR OFF / LOW / MIDDLE / HIGH 3D-DNR (3D Digital Noise Reduction) D-ZOOM OFF / ON (x1.0 ~ x32 PTZ) SLC OFF / ON SLC (Side Light Compensation) HME OFF / ON HME (Highlight Masking Exposure) DIS OFF / ON DIS (Digital Image Stabilizer) EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET MOTION (OMNI-Focus Lens Only) MOTION OFF / ON SET WINDOW ALL SET (Set the Entire Screen) ALL CLEAR (Clear the Entire Screen) SENSITIVITY (1 ~ 120) SHOW INDICATOR (OFF / ICON / TRACE) DELAY OUT (1 ~ 15) Motion Alarm Zoom-In Delay EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET PRIVACY MASK 1 OFF / ON MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON MASK 5 OFF / ON MASK 6 OFF / ON EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET SETUP CAMERA ID 0 ~ 255 TITLE OFF / ON DPC OFF / AUTO DPC (Dead Pixels Cancellation) MONITOR CRT / LCD LANGUAGE English, Japanese, Chinese BAUDRATE 2400 / 4800 / 9600 / 14400 / 19200 / 38400. Protocol is Pelco-D (fixed cannot be changed; hardcoded into the DSP) OMNI LENS OFF / 1 ~ 10 (for OMNI-PLUS CAMERA only) EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET SYNC SYNC INTERNAL / AUTO V-PHASE 0 ~ 199 EXIT JUMP EXIT / SAVE & EXIT / FACTORY SET EXIT EXIT Exit the menu SAVE&EXIT Exit the menu and save the setting FACTORY SET Reset the menu setting to factory default SPECIFICATIONS: Camera TYPE Image BL5363D Mount 3 Axis Ball Device Super HAD II CCD Size 1/3" Pixels-Total 811(H) x 508 (V) Pixels-Effective 768(H) x 494 (V) System 525 line, 2:1Interlace Horizontal Frequency Internal Mode 15,734Hz Vertical Frequency Internal Mode 59.94Hz Min. Scene Illumination F1.2 x256 Star-Light 0.14 Lux 0.0005 Lux in Color Functions BLC ON / OFF AGC HIGH / MIDDLE / LOW /OFF DRC OFF / INDOOR / OUTDOOR Mirror OFF / MIRROR / V-FLIP / ROTATE STAR-LIGHT AUTO (x2 ~ x250) / OFF 3D-DNR OFF / ON (0~100) HME OFF / ON Privacy Zone 6 Programmable Zone / Size Lens Focal Length 2.8~11mm Varifocal Auto Iris Lens Resolution Horizontal 560 TV Lines [Color]; 580 TV Lines [BW] Video Output VBS 1.0Vp-p VBS 1.0Vp-p(75 Load) S/N Ratio S/N Ratio 50dB OSD OSD YES Environmental Conditions Operating Temperature -10℃ ~ +55℃(14℉ ~ 131℉) Humidity Less than 90% Power Requirement 12VDC / 24VAC Power Consumption 1.96 [W] / 2.2 [W] Dimensions 96 x 120 mm Weight 1.6lbs Nema Type IP66 Certifications FCC, RoHS, CE Scanning 5436 W Crenshaw St. Tampa, FL 33634 Tel: 866-446-3595 / 813-888-9555 Fax: 813-888-9262 www.Digital-Watchdog.com [email protected] Technical Support Hours: Monday-Friday 8:30am to 8:00pm Eastern Time Color / BW Power Physical Specifications Starlight BL5363D Ball Camera User Manual Version #1: Camera without ICON Menu ABOUT MANUAL Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference. 11192010 CAMERA SETTINGS SETUP [DC] - Brightness (DC Lens is recommended.) LENS Manual. Shutter is available. FLK (Flicker Free) SHUTTER ESC (Electronic Shutter Control) - Brightness Adjustment Manual Adjustment ATW 1800K ~10500K (ATW is recommended). WHITE BALANCE Manual Adjustment AWC (Auto White Balance) BACKLIGHT OFF / LOW / MIDDLE / HIGH AGC NORMAL / HIGH / OFF (When the AGC is Off, DNR is not available.) DNR LOW / MIDDLE / HIGH / OFF SENS-UP AUTO x2 ~ x128 / OFF SPECIAL CAMERA ID OFF / ON DAY NIGHT AUTO / BW / EXTERNAL / COLOR SYNC INTERNAL / LINE MOTION DETECTION OFF / ON PRIVACY OFF / ON MIRROR OFF / ON SHARPNESS OFF / ON Level Adjustment RESET RETURN Return to main setup. SPECIFICATIONS: Camera TYPE Image BL5363D Mount 3 Axis Ball Device Super HAD II CCD Size 1/3" Pixels-Total 811(H) x 508 (V) Pixels-Effective 768(H) x 494 (V) System 525 line, 2:1Interlace Horizontal Frequency Internal Mode 15,734Hz Vertical Frequency Internal Mode 59.94Hz Min. Scene Illumination F1.2 x256 Star-Light 0.14 Lux 0.0005 Lux in Color Functions BLC ON / OFF AGC HIGH / MIDDLE / LOW /OFF DRC OFF / INDOOR / OUTDOOR Mirror OFF / MIRROR / V-FLIP / ROTATE STAR-LIGHT AUTO (x2 ~ x250) / OFF 3D-DNR OFF / ON (0~100) HME OFF / ON Privacy Zone 6 Programmable Zone / Size Lens Focal Length 2.8~11mm Varifocal Auto Iris Lens Resolution Horizontal 560 TV Lines [Color]; 580 TV Lines [BW] Video Output VBS 1.0Vp-p VBS 1.0Vp-p(75 Load) S/N Ratio S/N Ratio 50dB OSD OSD YES Environmental Conditions Operating Temperature -10℃ ~ +55℃(14℉ ~ 131℉) Humidity Less than 90% Power Requirement 12VDC / 24VAC Power Consumption 1.96 [W] / 2.2 [W] Dimensions 96 x 120 mm Weight 1.6lbs Nema Type IP66 Certifications FCC, RoHS, CE Scanning 5436 W Crenshaw St. Tampa, FL 33634 Tel: 866-446-3595 / 813-888-9555 Fax: 813-888-9262 www.Digital-Watchdog.com [email protected] Technical Support Hours: Monday-Friday 8:30am to 8:00pm Eastern Time Color / BW Power Physical Specifications