Transcript
SRL-4129 USER MANUAL Introduction: This led moonflower can make different RGB beam effects with the built-in sensor, it has many advantages, such as easy installation, safety, low power consumption, long lifetime and so on. Please read through the manual carefully before operation, in case of any problem, please call the local dealer for help. Specification: Input voltage：220VAC/50Hz Power： 4W Weight: 2KG Size: Fuse： 195×200×175MM 0.5A，250V Instruction: This unit can work as soon as powering on. After installation, please connect it to power supply and turn it on, the motor rotating direction and led color change with music, also stops when flash, if necessary; please adjust the sensor sensitivity knob for a expected effect. Cautions: 1. Don’t open the unit when it connects the power supply or is too hot. 2. This unit is no a toy, please keep it from children. 3. Please use correct power supply (220 V/50 Hz)
