Download User manuals

Chapter 7: Picture and sound controls
Setting Type
Adjusting the audio
You can adjust the white balance setting.
1
2
3
4
> Settings > PICTURE > Expert Picture
Settings > O K .
Press B or b to select White Balance. Press OK .
Press B or b to select 2P White Balance. Press OK .
Press B or b to select Red-Offset, Green-Offset,
Blue-Offset, Red-Gain, Green-Gain, or BlueGain. Press C or c to adjust. Press
.
This feature copies White Balance on the current input
to all other inputs. Individual settings that are not
allowed for a specific input will not be copied.
2
3
> Settings > PICTURE > Expert Picture
Settings > O K .
Press B or b to select White Balance. Press OK .
Press B or b to select Copy to All Inputs. Press
A confirmation screen appears.
Select Yes. Press O K .
Press
to partially reduce (1/2 Mute) or turn off
(Mute) the sound. Each time you press
, the mute
mode changes in the following order:
1/2 Mute
Mute
Volume
If the closed caption mode is set to Off when you select
MUTE mode, the closed caption feature becomes active
if the TV program is closed-captioned. To mute the
audio without activating the closed captioning, press
VOL
to set the volume to 0.
Copy to All Inputs
1
Muting the sound
Note: If you modify items in the SOUND menu while Mute
is active, Mute is cancelled.
OK
.
Selecting stereo/SAP broadcasts
Resetting to the factory default
The MTS (multi-channel TV sound) feature is only
available for analog signals on the ANT/CABLE input.
When the TV receives a stereo or SAP (second audio
program) broadcast, the icon STEREO or SAP appears
onscreen when Q is pressed.
1
To listen in stereo sound:
4
2
3
> Settings > PICTURE > Expert Picture
Settings > O K .
Press B or b to select Reset. Press O K .
A confirmation screen appears.
Select Yes. Press O K .
Locking the picture settings
The TheaterLock™ feature lets you lock items in the
PICTURE menu that affect the picture’s display. These
items cannot be modified when TheaterLock is set to
On.
1
2
> Settings > PICTURE > TheaterLock.
Press C or c to select On. Press
.
1
2
> Settings > SOUND > MTS.
Press C or c to select Stereo. Press
.
Note:
• You can typically leave the TV in Stereo mode because
it outputs the type of sound being broadcast (stereo or
monaural).
• If the sound is noisy, select Mono.
To listen to a second audio program on an analog
station (if available):
If provided by individual analog stations, you can listen
to a second audio program containing another
language, music, or other audio information.
For example, you will hear the other language instead
of the program’s normal audio.
1
2
> Settings > SOUND > MTS.
Press C or c to select SAP. Press
.
Note: If there is no sound in SAP mode, select Stereo.
52