Download Induction High Bay Light User Manual - lg
Transcript
Lango Highbay Lighting User Manual Thanks to read this manual before installation, and save it for reference in future. Induction Highbay Lighting I. Product Features 1. High pressure die-casting aluminum forming electrical cabinet. 2. Electrostatic spraying on the surface, beautiful appearance. 3. Polishing oxidation high pure aluminum reflector, high reflection, stable optical property. 4. Toughened glass, high transparency. 5. Equipped with our company’s circular induction lamp, high luminous efficiency, long use-life, excellent color rendering, stable ray and no flash, energy-saving, wide color temperature , soft ray, stable light output, etc. II. Electrical Diagram III. Note 1. Lamp source must be used together with corresponding ballasts to avoid damage or influencing the product life span. 2. Current and voltage must be within the range marked in the ballast, otherwise the lamp’s life span, lighting efficiency, color rendering and normal start will be influenced. 3. The wiring diagram must be followed when connecting the wire, and the wire must be fastened and stable. 4. The fixture must be properly connected to the ground. 5. No using in the corrosive, inflammable, and explosive places. 6. Power must be cut off when replacing the lamp source or ballasts, loose the 4 sides hasp, and then open the glass carefully to avoid damaging the glass. 7. The working temperature is high the lamp is on, and the metal shell around the lamp base is live, so at maintaining, the power must be cut off, and let the lamp cool off, in order to avoid burning and injuries. 8. Lamp glass and reflector shall be kept clean, soft cotton yarn can be used, but power must be cut off. 9. Though the ballasts have no load protection function, the lamps could be off due to kinds of reasons. In order to avoid the damage of ballasts too early, power must be cut off in time. 10. Lighting fixtures shall be saved in a dry and air ventilation environment without corrosive air around. No wet and strong vibration during transportation. IV. Declaration It is seriously declared that the lighting products manufactured and sold by Lango Lighting(Shanghai)Co.,Ltd all conform to the national or relevant departments’specifications. Warranty is a part of after sales service, Lango Lighting provides claim to the products with issues happening within the warranty date. Manufacturer:Lango Lighting(Shanghai)Co.,Ltd