Download SDS Series User Manual
Transcript
5. Advanced User Guidebook M knob to choose Period. 5. Press the F4 button, the period options added completes. 6. Press the F1 button again, the type items will display at the left of screen, and turn the M to choose Freq. 7. Press the F4 button, the frequency added completes, finish setting of CH1. 8. Press the F2 button and choose CH2 as the source. 9. Press the F1 button, the type items will display at the left of screen, and turn the M to choose Mean. 10. Press the F4 button, the Mean added completes. 11. Press the F1 button, the type items will display at the left of screen, and turn the M to choose PK-PK. 12. Press the F4 button, the PK-PK added completes, finish setting of CH2. The measured value will be displayed at the bottom left of the screen automatically (see Fig.5-54). Fig.5-54 automatic measurement The automatic measurement of voltage parameters The SDS series oscilloscopes provide automatic voltage measurements including Vpp, Vmax, Vmin, Vavg, Vamp, Vrms, Vtop, Vbase, Overshoot and Preshoot. Fig.5-55 below shows a pulse with some of the voltage measurement points. 64