Download Atlona Custom Installation Testing Kit

Atlona Custom Installation
Testing Kit
ATL-KITPROHD3
Don’t waste hours on troubleshooting ever again,
with the ATL-KITPROHD3 your answers are just
minutes away. With the ability to test EDIDs, cables,
and compatibilities of all devices before installing,
the ATL-KITPROHD3 enables you to fix
compatibility problems before they start. Able to
diagnose 99% of connectivity issues the ATLKITPROHD3 is also great for troubleshooting. Find
the source of your syncing issues with each part of
the Atlona Custom Installation Testing Kit. Test
cables and displays with the HD800, test sources
with the ATL-DIS7PROHD, and have a quick leave
behind solution for EDID and HDCP sync issues with
the HDSync.
Take the EDID not the display (ATL-ATHDSYNC)
The ATL-ATHDSYNC’s nonvolatile memory makes any EDID fully mobile.
Save any display’s EDID and take it to the job site or a different end of an
installation, avoiding heavy lifting, recabling, and extra time on
troubleshooting.
Find the problem before it starts (ATL-ATHD800)
With 16 testing patterns (3 - 3D patterns), EDID reading, resolutions up to 1080p or
1920x1200, and HDCP testing, the ATL-ATHD800 can find almost any compatibility
problem before installation.
Diversify (ATL-ATDIS7PROHD)
With built in format compatibility, connect any HDMI, DVI (with optional adapter),
VGA, or Component (with included adapter) device to the ATL-ATDIS7PROHD for
testing of resolutions up to 1080p or 1920x1200.
BTX Technol
ogi
esI
nc. | www.
btx.
com | Tel
:800.
666.
0996 | i
nfo@btx.
com
Atlona Custom Installation
Testing Kit
ATK-KITPROHD3
Bring the display to the source without having to move a 50”
display. With the ability to not only test resolutions up to 1080p,
1920x1200 and 3D but the ability to learn any display’s EDID.
The ATL-ATDIS7PROHD is a testing device that can
duplicate hot plug events and validate audio signal
pressence. Ensure no time is wasted on an installation or tech
call with the Atlona 7” Portable Testing Monitor.
Clip to a pocket and go. The fully portable
ATL-ATBATDIS7PRO is a rechargeable accessory
for the ATL-ATDIS7PROHD and ATL-ATHD800,
allowing them up to 4 hours of use.
With so many potential problems in any installation it’s always better to
be ready before the problem starts. With the Atlona Portable HDMI Signal
Generator, test HDMI cables, determine compatible resolutions, and
read EDIDs before installation to avoid problems or after to
troubleshoot compatibility issues. Save time and avoid guesswork with
the ATL-ATHD800.
Read, copy and replicate almost any EDID with the AT-HDSync. With
built in EDID memory the HDSync is perfect for large installations
where EDID issues usually occur. Simply learn the display’s EDID,
place the HDSync in the line next to the source and watch HDCP
and EDID problems disappear. The Atlona HDMI Recorder and Hot
Plug Emulator is an easy and affordable solution for some of the
most common installation problems out there.
PACKAGE CONTENTS
• 1 x AT-DIS7-PROHD
• 1 x Power Supply (5V DC 2.6A)
• 1 x 5ft VGA to Component Cable
• 1 x User Manual
• 1 x AT-HDSync
• 1 x 5V DC power supply unit
• 1 x User’s manual
• 1 x AT-HD800
• 1 x 5V/2A Power Supply
• 4 x AA Batteries
• 1 x Rubber Case
• 1 x User Manual
• 1 x AT-BAT-DIS7PRO
• 1 x Leather case
• 1 x USB to DC adapter cable
• 1 x USB to Micro USB cable
BTX Technol
ogi
esI
nc. | www.
btx.
com | Tel
:800.
666.
0996 | i
nfo@btx.
com