Download TQC AMINE BLUSH KIT

TQC AMINE BLUSH KIT
SP7500
1 SAFETY PRECAUTIONS
•
•
•
•
The indicator is not suitable for consumption.
If ingested please consult local doctor.
pH indicators can cause discoloration on the skin, this is of temporary nature.
When irritation occurs due to skin contact consult local doctor.
2 PRODUCT DESCRIPTION
The TQC Amine Blush Kit is a multi step amine blush indicator. Due to advanced research on suitable media the
TQC Amine Blush Kit is the most advanced kit on the marked. Based on a double colour change the indicator is
the first to implement this multi step colour change.
3 STANDARDS:
None apply
4 SCOPE OF SUPPLY:
•
•
•
•
Hardcase for storage and transport
50ml Nebulizer bottle
Set of visualisation papers
Tweezers
5 INSTRUCTIONS:
5.1 Perform a test
• Spray the TQC Amine Blush test solution on the surface that needs to be tested.
• Watch for colour change in the test solution on the surface. As shown in below gradient
• When in doubt apply the visualisation paper with the tweezers.
TQC Amine Blush kit colour gradient*
pH < 6.0
Amine free
pH 7.4
pH 8.5
Amine possible /
probable
pH 9.0
High contamination
* Actual colour may vary dependent on sprayed amount and lighting conditions
5.2 Interpretation of the results:
As all amine test kits the indication is based on changes in pH-value. Variation of surface pH-value can be
caused by multiple factors. On a coated surface the most probable possibility for contamination is Amine Blush.
When the coating is for long time exposed to other contamination sources, these can also influence the surface
pH-value.
6 DISCLAIMER
The information given in this manual is not intended to be exhaustive and any person using the product for
any purpose other than that specifically recommended in this manual without first obtaining written
confirmation from us as to the suitability of the product for the intended purpose does so at his own risk.
Whilst we endeavour to ensure that all advice we give about the product (whether in this manual or otherwise)
is correct we have no control over either the quality or condition of the product or the many factors affecting
the use and application of the product. Therefore, unless we specifically agree in writing to do so, we do not
accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or
damage (other than death or personal injury resulting from our negligence) arising out of the use of the
product. The information contained in this manual is liable to modification from time to time in the light of
experience and our policy of continuous product development.