Download iB72 User Manual

Model: iB72
IB English/French (Front)
Color: 1 C + 1C - Black text on white paper
Size: 360 W x 270 H (mm)
Date: May 11, 2015
Introduction
Specifications
Your new iHome Bluetooth stereo ear buds are designed to link with your Bluetooth
BT specification
BT profiles supported
BT IC
Frequency Range
Rechargeable Battery
Operating distance
Impedance (speaker)
Speaker dimension
Working electric current
Working Voltage
Talk time
Music time
Standby time
Charging time
enabled smartphone or music player to allow you to wirelessly listen to music and answer
phone calls within the normal 10 meter (33 feet) Bluetooth operating range.
iB72
Your ear buds are supplied with 3 sizes of ear cushions and 3 sets of ‘fin’ type stabilizers,
to allow you to customize your ear buds for maximum wearing comfort and stability
during all kinds of exercise and physical activities.
wireless earbuds with mic + remote
Please review this manual carefully to make sure you are getting the maximum benefit
User Manual
from all of the features of your new ear buds, and keep this manual for future reference.
What’s Included
3. Connect the standard USB plug on the charging cable to any standard USB power
port such as found on a notebook computer, or the charging adapter for an iPod,
iPhone, etc.
4. The Power/Charging/Pairing indicator will glow RED while the ear buds are
charging. The indicator will turn BLUE when the battery is fully charged, indicating
that your ear buds are ready for use.
V4.1
A2DP, AVRCP, GAVDP, GAP, HSP
CSR8645
20Hz - 20kHz
45mAh Li-Polymer x 2
10 Meter without any obstacle
16ohm
Ф 6mm
15mA
3~4.2V
5 hours (with fully charged battery)
5 hours (with fully charged battery)
48 hours (under paired)
about 2 hours
3. Wearing Your Ear Buds
Your iHome ear buds are supplied with 3 sizes of ear
cushions and 3 sizes of flexible stabilizer ‘fins’. The
ear buds are clearly marked with ‘L’ and ‘R’
indications. Place the ‘L’ ear bud in your left ear and
the ‘R’ ear buds in your right ear as shown in the
illustration.
When worn properly the control dongle will be on
your right side. Some users prefer to wear the ear
buds with the cable behind their neck. Others may
prefer to have the cable in front of their neck. Either
wearing style is acceptable.
PREPARATION FOR USE
1. Controls and Indicators
1
USB Charging Cable x
2
1
3
iB72 Stereo ear buds
with control dongle
Mx 2
Lx 2
SIZE
SIZE
Sx 2
SIZE
Silicon Ear Cushions
L x 1set
SIZE
M x 1set
SIZE
S x 1set
SIZE
Stabilizer Fins
5
72
: BTH042
4
6
1
– Button (Volume Down and Skip Back)
2
Multi-Function Control Button (MFB)
3
+ Button (Volume Up and Skip Forward)
4
LED Indicator (Power On, Pairing, Charging Indication)
5
Micro USB Charging Port (Under Water-Resistant Cover)
6
Microphone
2. Charging Your Ear Buds
IMPORTANT: Your iHome ear buds operate on a built-in rechargeable lithium-ion
battery. Although the battery was fully charged when it left our factory, like all batteries
it can experience some power drain during periods of non-use. For best results we
recommend that you charge the battery for approximately 3 hours before using your
ear buds for the first time.
1. Lift up the water resistant cover to expose the micro USB
charging port.
2. Connect the micro USB plug on the charging cable to the
micro USB port on the headphone. NOTE: The micro
USB plug can only be inserted into the micro USB
charging port one way. To avoid damaging the
connection make sure the plug is properly aligned with
the charging port.
OPERATING INSTRUCTIONS
It is not necessary to use the same size cushions and fins. You may find for example
that using the ‘M’ size cushions with the ‘S’ size fins is most comfortable for you. That
is a matter of personal choice.
NOTE: The first time you perform this operation you might find it convenient to place
only the left ear bud in your left ear. This will allow you to hold the control dongle in
your right hand so that you can see the control buttons and the LED indicator and still
hear the confirmation tones in your left ear. Once the ear buds have turned on and
paired with your Bluetooth device you can then place the right ear bud in your right ear.
2. Power On / Auto-Linking Mode
PRESS and HOLD the Multi-Function Button (MFB) on the control dongle for
approximately 2 seconds until you hear the three ascending beep tones that indicate
the power is ‘On’. The blue LED begins flashing two times per second indicating that
your ear buds are in the Auto-Linking Mode and trying to re-link to a previously paired
device as long as that device is within the normal pairing range of approximately
33-feet. If your ear buds do not find a previously paired device that is in range and
turned ‘on’ within 3 minutes they will switch from the Auto-Linking mode to the
Power ‘Off’ mode to extend the battery life.
3. Power Off
To shut the power ‘Off’ at any time PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 2 seconds. You will hear three
descending beep tones, the red LED flashes once and then the power shuts off.
4. Manually Pairing Your iHome Ear Buds With Your Bluetooth Device
NOTE: Your ear buds must be ‘Off’’ to begin the manual pairing process.
With the ear buds in the ‘Off’ mode, PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 4 seconds until you see the LED
indicator alternately flashing blue and red. Release the Multi-Function Button (MFB).
Make sure that your Bluetooth device is turned ‘On’ and in the Pairing mode. Refer
to the instructions supplied with your device if necessary. When your device “finds”
the iB72 ear buds, you will see “iHome iB72” appear on your devices Bluetooth
menu screen together with the words “Not Paired”, “Not Connected” or similar.
Touch “iHome iB72” to complete the pairing process. You will hear a single beep,
and you will see “iHome iB72 Connected” on your devices Bluetooth menu. NOTE:
If your Bluetooth device asks for a Password or a PIN to complete the pairing
process, enter “0000” on the keypad of your device.
You are now ready to begin streaming music wirelessly from your Bluetooth device
to your iHome iB72 Bluetooth ear buds.
Action Required
Turn Ear Buds 'On'
When ear buds are 'Off press and hold the MFB for 2 seconds until you hear the
3 ascending beep tones. The LED indicator flashes blue.
When ear buds are 'Off' press and hold the MFB for 4 seconds until you see the
LED indicator alternately flashing red and blue.
Make sure your Bluetooth device is 'On' and in the Pairing Mode. When
iHome iB72 appears on your devices menu, select it to complete pairing.
Short press the MFB to start playback. Short press to pause playback.
Short press to resume playback.
Short press the "+" button during playback
Short press the " - " button during playback
Short press the " - " button twice during playback
Press and hold the "+" button during playback
Press and hold the " - " button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will
automatically pause when you are answering a call and resume when you end the call.
Press and hold the MFB for 1 - 2 seconds to decline the incoming call.
Short press the MFB to end the call and 'hang up'.
While the call is in progress press and hold the MFB for 2 seconds
(transfers call from ear buds to phone or the reverse)
When phone is paired with ear buds but no call is in progress double press the
MFB to redial the last number.
While a call is in progress, double press the MFB to put the call on hold
and answer a second caller. Double press MFB again to switch between calls.
Short press the MFB to end current call and return to remaining call.
Press and hold the MFB for 2 seconds until you hear the three descending beep
tones. The LED indicator turns red and then shuts off.
Enter the Pairing Mode
Pairing
Play / Pause
Skip to next track
Skip to beginning of current track
Skip to beginning of previous track
Increase volume
Decrease volume
Answer an incoming phone call
Decline an incoming phone call
End a call
Transfer a call between the
phone and the ear buds
Last number redial
Answer second call/Call waiting
Turn Ear Buds Off
LED light indicator
Lower battery
Charging
Bluetooth connected
Bluetooth not connected
Bluetooth pairing
2
FCC Information
Function
Red LED light is blinking
Red LED is lit when charging / Blue LED is lit when fully charged
Blue LED is blinking slowly
Blue LED is blinking quickly
Blue & Red LED light is blinking at the same time alternately
Limited One-Year Warranty Information
FCC ID: RMZ-BTH04
IC: 986B-IB72
Declaration ID: D024204
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants
this product to be free from defects in workmanship and materials, under normal use and
conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the
store where it was originally purchased. Should this fail to resolve the matter and service
still be required by reason of any defect or malfunction during the warranty period, SDI will
repair or, at its discretion, replace this product without charge. This decision is subject to
verification of the defect or malfunction upon delivery of this product to the Factory Service
Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return
Authorization Number and shipping instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was
designed. It does not cover (i) products which have been damaged by negligence or willful
actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage
to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this
product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners
of the product other than to the original purchaser. In no event will SDI or any of its affiliates,
contractors, resellers, their officers, directors, shareholders, members or agents be liable
to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties
or exclusion of consequential damages, so these restrictions may not apply to you.) This
warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money
order, cashier's check, or credit card) for purchase of your SDI product.
© 2015 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
5. Using Your iHome Bluetooth Ear Buds
The chart on Page 4 explains the basic functions and operations of your Bluetooth
ear buds.
3
R
These earbuds come preinstalled with the medium
size cushions. If you find that the medium size
cushions are either too large or too small for your
ears you can easily replace them with the small or
large cushions. Additionally, if you would like to wear
these earbuds during active use, you may want to
select a comfortable size of in-ear ‘fins’ for added
stability. To change to a different size cushions or
fins, first simply pull the cushion off the tube, then
position the desired size of fin on the ear bud
housing as shown, and then replace the desired size cushion Be sure to match the
‘L' and ‘R' fins with the corresponding earbuds, the ‘fins’ should hook into the front
part of your ear as shown in the illustration.
IMPORTANT: Make sure that the cushion is firmly seated on the tube so that the
cushion does not remain in your ear canal when you remove the ear buds.
1
1. Switching Your Ear Buds On and Off
L
4
iB72-051115-C (EN)
Printed in China
Model: iB72
IB English/French (Front)
Color: 1 C + 1C - Black text on white paper
Size: 360 W x 270 H (mm)
Date: May 11, 2015
Introduction
Specifications
Your new iHome Bluetooth stereo ear buds are designed to link with your Bluetooth
BT specification
BT profiles supported
BT IC
Frequency Range
Rechargeable Battery
Operating distance
Impedance (speaker)
Speaker dimension
Working electric current
Working Voltage
Talk time
Music time
Standby time
Charging time
enabled smartphone or music player to allow you to wirelessly listen to music and answer
phone calls within the normal 10 meter (33 feet) Bluetooth operating range.
iB72
Your ear buds are supplied with 3 sizes of ear cushions and 3 sets of ‘fin’ type stabilizers,
to allow you to customize your ear buds for maximum wearing comfort and stability
during all kinds of exercise and physical activities.
wireless earbuds with mic + remote
Please review this manual carefully to make sure you are getting the maximum benefit
User Manual
from all of the features of your new ear buds, and keep this manual for future reference.
What’s Included
3. Connect the standard USB plug on the charging cable to any standard USB power
port such as found on a notebook computer, or the charging adapter for an iPod,
iPhone, etc.
4. The Power/Charging/Pairing indicator will glow RED while the ear buds are
charging. The indicator will turn BLUE when the battery is fully charged, indicating
that your ear buds are ready for use.
V4.1
A2DP, AVRCP, GAVDP, GAP, HSP
CSR8645
20Hz - 20kHz
45mAh Li-Polymer x 2
10 Meter without any obstacle
16ohm
Ф 6mm
15mA
3~4.2V
5 hours (with fully charged battery)
5 hours (with fully charged battery)
48 hours (under paired)
about 2 hours
3. Wearing Your Ear Buds
Your iHome ear buds are supplied with 3 sizes of ear
cushions and 3 sizes of flexible stabilizer ‘fins’. The
ear buds are clearly marked with ‘L’ and ‘R’
indications. Place the ‘L’ ear bud in your left ear and
the ‘R’ ear buds in your right ear as shown in the
illustration.
When worn properly the control dongle will be on
your right side. Some users prefer to wear the ear
buds with the cable behind their neck. Others may
prefer to have the cable in front of their neck. Either
wearing style is acceptable.
PREPARATION FOR USE
1. Controls and Indicators
1
USB Charging Cable x
2
1
3
iB72 Stereo ear buds
with control dongle
Mx 2
Lx 2
SIZE
SIZE
Sx 2
SIZE
Silicon Ear Cushions
L x 1set
SIZE
M x 1set
SIZE
S x 1set
SIZE
Stabilizer Fins
5
72
: BTH042
4
6
1
– Button (Volume Down and Skip Back)
2
Multi-Function Control Button (MFB)
3
+ Button (Volume Up and Skip Forward)
4
LED Indicator (Power On, Pairing, Charging Indication)
5
Micro USB Charging Port (Under Water-Resistant Cover)
6
Microphone
2. Charging Your Ear Buds
IMPORTANT: Your iHome ear buds operate on a built-in rechargeable lithium-ion
battery. Although the battery was fully charged when it left our factory, like all batteries
it can experience some power drain during periods of non-use. For best results we
recommend that you charge the battery for approximately 3 hours before using your
ear buds for the first time.
1. Lift up the water resistant cover to expose the micro USB
charging port.
2. Connect the micro USB plug on the charging cable to the
micro USB port on the headphone. NOTE: The micro
USB plug can only be inserted into the micro USB
charging port one way. To avoid damaging the
connection make sure the plug is properly aligned with
the charging port.
OPERATING INSTRUCTIONS
It is not necessary to use the same size cushions and fins. You may find for example
that using the ‘M’ size cushions with the ‘S’ size fins is most comfortable for you. That
is a matter of personal choice.
NOTE: The first time you perform this operation you might find it convenient to place
only the left ear bud in your left ear. This will allow you to hold the control dongle in
your right hand so that you can see the control buttons and the LED indicator and still
hear the confirmation tones in your left ear. Once the ear buds have turned on and
paired with your Bluetooth device you can then place the right ear bud in your right ear.
2. Power On / Auto-Linking Mode
PRESS and HOLD the Multi-Function Button (MFB) on the control dongle for
approximately 2 seconds until you hear the three ascending beep tones that indicate
the power is ‘On’. The blue LED begins flashing two times per second indicating that
your ear buds are in the Auto-Linking Mode and trying to re-link to a previously paired
device as long as that device is within the normal pairing range of approximately
33-feet. If your ear buds do not find a previously paired device that is in range and
turned ‘on’ within 3 minutes they will switch from the Auto-Linking mode to the
Power ‘Off’ mode to extend the battery life.
3. Power Off
To shut the power ‘Off’ at any time PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 2 seconds. You will hear three
descending beep tones, the red LED flashes once and then the power shuts off.
4. Manually Pairing Your iHome Ear Buds With Your Bluetooth Device
NOTE: Your ear buds must be ‘Off’’ to begin the manual pairing process.
With the ear buds in the ‘Off’ mode, PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 4 seconds until you see the LED
indicator alternately flashing blue and red. Release the Multi-Function Button (MFB).
Make sure that your Bluetooth device is turned ‘On’ and in the Pairing mode. Refer
to the instructions supplied with your device if necessary. When your device “finds”
the iB72 ear buds, you will see “iHome iB72” appear on your devices Bluetooth
menu screen together with the words “Not Paired”, “Not Connected” or similar.
Touch “iHome iB72” to complete the pairing process. You will hear a single beep,
and you will see “iHome iB72 Connected” on your devices Bluetooth menu. NOTE:
If your Bluetooth device asks for a Password or a PIN to complete the pairing
process, enter “0000” on the keypad of your device.
You are now ready to begin streaming music wirelessly from your Bluetooth device
to your iHome iB72 Bluetooth ear buds.
Action Required
Turn Ear Buds 'On'
When ear buds are 'Off press and hold the MFB for 2 seconds until you hear the
3 ascending beep tones. The LED indicator flashes blue.
When ear buds are 'Off' press and hold the MFB for 4 seconds until you see the
LED indicator alternately flashing red and blue.
Make sure your Bluetooth device is 'On' and in the Pairing Mode. When
iHome iB72 appears on your devices menu, select it to complete pairing.
Short press the MFB to start playback. Short press to pause playback.
Short press to resume playback.
Short press the "+" button during playback
Short press the " - " button during playback
Short press the " - " button twice during playback
Press and hold the "+" button during playback
Press and hold the " - " button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will
automatically pause when you are answering a call and resume when you end the call.
Press and hold the MFB for 1 - 2 seconds to decline the incoming call.
Short press the MFB to end the call and 'hang up'.
While the call is in progress press and hold the MFB for 2 seconds
(transfers call from ear buds to phone or the reverse)
When phone is paired with ear buds but no call is in progress double press the
MFB to redial the last number.
While a call is in progress, double press the MFB to put the call on hold
and answer a second caller. Double press MFB again to switch between calls.
Short press the MFB to end current call and return to remaining call.
Press and hold the MFB for 2 seconds until you hear the three descending beep
tones. The LED indicator turns red and then shuts off.
Enter the Pairing Mode
Pairing
Play / Pause
Skip to next track
Skip to beginning of current track
Skip to beginning of previous track
Increase volume
Decrease volume
Answer an incoming phone call
Decline an incoming phone call
End a call
Transfer a call between the
phone and the ear buds
Last number redial
Answer second call/Call waiting
Turn Ear Buds Off
LED light indicator
Lower battery
Charging
Bluetooth connected
Bluetooth not connected
Bluetooth pairing
2
FCC Information
Function
Red LED light is blinking
Red LED is lit when charging / Blue LED is lit when fully charged
Blue LED is blinking slowly
Blue LED is blinking quickly
Blue & Red LED light is blinking at the same time alternately
Limited One-Year Warranty Information
FCC ID: RMZ-BTH04
IC: 986B-IB72
Declaration ID: D024204
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants
this product to be free from defects in workmanship and materials, under normal use and
conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the
store where it was originally purchased. Should this fail to resolve the matter and service
still be required by reason of any defect or malfunction during the warranty period, SDI will
repair or, at its discretion, replace this product without charge. This decision is subject to
verification of the defect or malfunction upon delivery of this product to the Factory Service
Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return
Authorization Number and shipping instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was
designed. It does not cover (i) products which have been damaged by negligence or willful
actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage
to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this
product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners
of the product other than to the original purchaser. In no event will SDI or any of its affiliates,
contractors, resellers, their officers, directors, shareholders, members or agents be liable
to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties
or exclusion of consequential damages, so these restrictions may not apply to you.) This
warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money
order, cashier's check, or credit card) for purchase of your SDI product.
© 2015 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
5. Using Your iHome Bluetooth Ear Buds
The chart on Page 4 explains the basic functions and operations of your Bluetooth
ear buds.
3
R
These earbuds come preinstalled with the medium
size cushions. If you find that the medium size
cushions are either too large or too small for your
ears you can easily replace them with the small or
large cushions. Additionally, if you would like to wear
these earbuds during active use, you may want to
select a comfortable size of in-ear ‘fins’ for added
stability. To change to a different size cushions or
fins, first simply pull the cushion off the tube, then
position the desired size of fin on the ear bud
housing as shown, and then replace the desired size cushion Be sure to match the
‘L' and ‘R' fins with the corresponding earbuds, the ‘fins’ should hook into the front
part of your ear as shown in the illustration.
IMPORTANT: Make sure that the cushion is firmly seated on the tube so that the
cushion does not remain in your ear canal when you remove the ear buds.
1
1. Switching Your Ear Buds On and Off
L
4
iB72-051115-C (EN)
Printed in China
Model: iB72
IB English/French (Front)
Color: 1 C + 1C - Black text on white paper
Size: 360 W x 270 H (mm)
Date: May 11, 2015
Introduction
Specifications
Your new iHome Bluetooth stereo ear buds are designed to link with your Bluetooth
BT specification
BT profiles supported
BT IC
Frequency Range
Rechargeable Battery
Operating distance
Impedance (speaker)
Speaker dimension
Working electric current
Working Voltage
Talk time
Music time
Standby time
Charging time
enabled smartphone or music player to allow you to wirelessly listen to music and answer
phone calls within the normal 10 meter (33 feet) Bluetooth operating range.
iB72
Your ear buds are supplied with 3 sizes of ear cushions and 3 sets of ‘fin’ type stabilizers,
to allow you to customize your ear buds for maximum wearing comfort and stability
during all kinds of exercise and physical activities.
wireless earbuds with mic + remote
Please review this manual carefully to make sure you are getting the maximum benefit
User Manual
from all of the features of your new ear buds, and keep this manual for future reference.
What’s Included
3. Connect the standard USB plug on the charging cable to any standard USB power
port such as found on a notebook computer, or the charging adapter for an iPod,
iPhone, etc.
4. The Power/Charging/Pairing indicator will glow RED while the ear buds are
charging. The indicator will turn BLUE when the battery is fully charged, indicating
that your ear buds are ready for use.
V4.1
A2DP, AVRCP, GAVDP, GAP, HSP
CSR8645
20Hz - 20kHz
45mAh Li-Polymer x 2
10 Meter without any obstacle
16ohm
Ф 6mm
15mA
3~4.2V
5 hours (with fully charged battery)
5 hours (with fully charged battery)
48 hours (under paired)
about 2 hours
3. Wearing Your Ear Buds
Your iHome ear buds are supplied with 3 sizes of ear
cushions and 3 sizes of flexible stabilizer ‘fins’. The
ear buds are clearly marked with ‘L’ and ‘R’
indications. Place the ‘L’ ear bud in your left ear and
the ‘R’ ear buds in your right ear as shown in the
illustration.
When worn properly the control dongle will be on
your right side. Some users prefer to wear the ear
buds with the cable behind their neck. Others may
prefer to have the cable in front of their neck. Either
wearing style is acceptable.
PREPARATION FOR USE
1. Controls and Indicators
1
USB Charging Cable x
2
1
3
iB72 Stereo ear buds
with control dongle
Mx 2
Lx 2
SIZE
SIZE
Sx 2
SIZE
Silicon Ear Cushions
L x 1set
SIZE
M x 1set
SIZE
S x 1set
SIZE
Stabilizer Fins
5
72
: BTH042
4
6
1
– Button (Volume Down and Skip Back)
2
Multi-Function Control Button (MFB)
3
+ Button (Volume Up and Skip Forward)
4
LED Indicator (Power On, Pairing, Charging Indication)
5
Micro USB Charging Port (Under Water-Resistant Cover)
6
Microphone
2. Charging Your Ear Buds
IMPORTANT: Your iHome ear buds operate on a built-in rechargeable lithium-ion
battery. Although the battery was fully charged when it left our factory, like all batteries
it can experience some power drain during periods of non-use. For best results we
recommend that you charge the battery for approximately 3 hours before using your
ear buds for the first time.
1. Lift up the water resistant cover to expose the micro USB
charging port.
2. Connect the micro USB plug on the charging cable to the
micro USB port on the headphone. NOTE: The micro
USB plug can only be inserted into the micro USB
charging port one way. To avoid damaging the
connection make sure the plug is properly aligned with
the charging port.
OPERATING INSTRUCTIONS
It is not necessary to use the same size cushions and fins. You may find for example
that using the ‘M’ size cushions with the ‘S’ size fins is most comfortable for you. That
is a matter of personal choice.
NOTE: The first time you perform this operation you might find it convenient to place
only the left ear bud in your left ear. This will allow you to hold the control dongle in
your right hand so that you can see the control buttons and the LED indicator and still
hear the confirmation tones in your left ear. Once the ear buds have turned on and
paired with your Bluetooth device you can then place the right ear bud in your right ear.
2. Power On / Auto-Linking Mode
PRESS and HOLD the Multi-Function Button (MFB) on the control dongle for
approximately 2 seconds until you hear the three ascending beep tones that indicate
the power is ‘On’. The blue LED begins flashing two times per second indicating that
your ear buds are in the Auto-Linking Mode and trying to re-link to a previously paired
device as long as that device is within the normal pairing range of approximately
33-feet. If your ear buds do not find a previously paired device that is in range and
turned ‘on’ within 3 minutes they will switch from the Auto-Linking mode to the
Power ‘Off’ mode to extend the battery life.
3. Power Off
To shut the power ‘Off’ at any time PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 2 seconds. You will hear three
descending beep tones, the red LED flashes once and then the power shuts off.
4. Manually Pairing Your iHome Ear Buds With Your Bluetooth Device
NOTE: Your ear buds must be ‘Off’’ to begin the manual pairing process.
With the ear buds in the ‘Off’ mode, PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 4 seconds until you see the LED
indicator alternately flashing blue and red. Release the Multi-Function Button (MFB).
Make sure that your Bluetooth device is turned ‘On’ and in the Pairing mode. Refer
to the instructions supplied with your device if necessary. When your device “finds”
the iB72 ear buds, you will see “iHome iB72” appear on your devices Bluetooth
menu screen together with the words “Not Paired”, “Not Connected” or similar.
Touch “iHome iB72” to complete the pairing process. You will hear a single beep,
and you will see “iHome iB72 Connected” on your devices Bluetooth menu. NOTE:
If your Bluetooth device asks for a Password or a PIN to complete the pairing
process, enter “0000” on the keypad of your device.
You are now ready to begin streaming music wirelessly from your Bluetooth device
to your iHome iB72 Bluetooth ear buds.
Action Required
Turn Ear Buds 'On'
When ear buds are 'Off press and hold the MFB for 2 seconds until you hear the
3 ascending beep tones. The LED indicator flashes blue.
When ear buds are 'Off' press and hold the MFB for 4 seconds until you see the
LED indicator alternately flashing red and blue.
Make sure your Bluetooth device is 'On' and in the Pairing Mode. When
iHome iB72 appears on your devices menu, select it to complete pairing.
Short press the MFB to start playback. Short press to pause playback.
Short press to resume playback.
Short press the "+" button during playback
Short press the " - " button during playback
Short press the " - " button twice during playback
Press and hold the "+" button during playback
Press and hold the " - " button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will
automatically pause when you are answering a call and resume when you end the call.
Press and hold the MFB for 1 - 2 seconds to decline the incoming call.
Short press the MFB to end the call and 'hang up'.
While the call is in progress press and hold the MFB for 2 seconds
(transfers call from ear buds to phone or the reverse)
When phone is paired with ear buds but no call is in progress double press the
MFB to redial the last number.
While a call is in progress, double press the MFB to put the call on hold
and answer a second caller. Double press MFB again to switch between calls.
Short press the MFB to end current call and return to remaining call.
Press and hold the MFB for 2 seconds until you hear the three descending beep
tones. The LED indicator turns red and then shuts off.
Enter the Pairing Mode
Pairing
Play / Pause
Skip to next track
Skip to beginning of current track
Skip to beginning of previous track
Increase volume
Decrease volume
Answer an incoming phone call
Decline an incoming phone call
End a call
Transfer a call between the
phone and the ear buds
Last number redial
Answer second call/Call waiting
Turn Ear Buds Off
LED light indicator
Lower battery
Charging
Bluetooth connected
Bluetooth not connected
Bluetooth pairing
2
FCC Information
Function
Red LED light is blinking
Red LED is lit when charging / Blue LED is lit when fully charged
Blue LED is blinking slowly
Blue LED is blinking quickly
Blue & Red LED light is blinking at the same time alternately
Limited One-Year Warranty Information
FCC ID: RMZ-BTH04
IC: 986B-IB72
Declaration ID: D024204
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants
this product to be free from defects in workmanship and materials, under normal use and
conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the
store where it was originally purchased. Should this fail to resolve the matter and service
still be required by reason of any defect or malfunction during the warranty period, SDI will
repair or, at its discretion, replace this product without charge. This decision is subject to
verification of the defect or malfunction upon delivery of this product to the Factory Service
Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return
Authorization Number and shipping instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was
designed. It does not cover (i) products which have been damaged by negligence or willful
actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage
to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this
product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners
of the product other than to the original purchaser. In no event will SDI or any of its affiliates,
contractors, resellers, their officers, directors, shareholders, members or agents be liable
to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties
or exclusion of consequential damages, so these restrictions may not apply to you.) This
warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money
order, cashier's check, or credit card) for purchase of your SDI product.
© 2015 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
5. Using Your iHome Bluetooth Ear Buds
The chart on Page 4 explains the basic functions and operations of your Bluetooth
ear buds.
3
R
These earbuds come preinstalled with the medium
size cushions. If you find that the medium size
cushions are either too large or too small for your
ears you can easily replace them with the small or
large cushions. Additionally, if you would like to wear
these earbuds during active use, you may want to
select a comfortable size of in-ear ‘fins’ for added
stability. To change to a different size cushions or
fins, first simply pull the cushion off the tube, then
position the desired size of fin on the ear bud
housing as shown, and then replace the desired size cushion Be sure to match the
‘L' and ‘R' fins with the corresponding earbuds, the ‘fins’ should hook into the front
part of your ear as shown in the illustration.
IMPORTANT: Make sure that the cushion is firmly seated on the tube so that the
cushion does not remain in your ear canal when you remove the ear buds.
1
1. Switching Your Ear Buds On and Off
L
4
iB72-051115-C (EN)
Printed in China
Model: iB72
IB English/French (Front)
Color: 1 C + 1C - Black text on white paper
Size: 360 W x 270 H (mm)
Date: May 11, 2015
Introduction
Specifications
Your new iHome Bluetooth stereo ear buds are designed to link with your Bluetooth
BT specification
BT profiles supported
BT IC
Frequency Range
Rechargeable Battery
Operating distance
Impedance (speaker)
Speaker dimension
Working electric current
Working Voltage
Talk time
Music time
Standby time
Charging time
enabled smartphone or music player to allow you to wirelessly listen to music and answer
phone calls within the normal 10 meter (33 feet) Bluetooth operating range.
iB72
Your ear buds are supplied with 3 sizes of ear cushions and 3 sets of ‘fin’ type stabilizers,
to allow you to customize your ear buds for maximum wearing comfort and stability
during all kinds of exercise and physical activities.
wireless earbuds with mic + remote
Please review this manual carefully to make sure you are getting the maximum benefit
User Manual
from all of the features of your new ear buds, and keep this manual for future reference.
What’s Included
3. Connect the standard USB plug on the charging cable to any standard USB power
port such as found on a notebook computer, or the charging adapter for an iPod,
iPhone, etc.
4. The Power/Charging/Pairing indicator will glow RED while the ear buds are
charging. The indicator will turn BLUE when the battery is fully charged, indicating
that your ear buds are ready for use.
V4.1
A2DP, AVRCP, GAVDP, GAP, HSP
CSR8645
20Hz - 20kHz
45mAh Li-Polymer x 2
10 Meter without any obstacle
16ohm
Ф 6mm
15mA
3~4.2V
5 hours (with fully charged battery)
5 hours (with fully charged battery)
48 hours (under paired)
about 2 hours
3. Wearing Your Ear Buds
Your iHome ear buds are supplied with 3 sizes of ear
cushions and 3 sizes of flexible stabilizer ‘fins’. The
ear buds are clearly marked with ‘L’ and ‘R’
indications. Place the ‘L’ ear bud in your left ear and
the ‘R’ ear buds in your right ear as shown in the
illustration.
When worn properly the control dongle will be on
your right side. Some users prefer to wear the ear
buds with the cable behind their neck. Others may
prefer to have the cable in front of their neck. Either
wearing style is acceptable.
PREPARATION FOR USE
1. Controls and Indicators
1
USB Charging Cable x
2
1
3
iB72 Stereo ear buds
with control dongle
Mx 2
Lx 2
SIZE
SIZE
Sx 2
SIZE
Silicon Ear Cushions
L x 1set
SIZE
M x 1set
SIZE
S x 1set
SIZE
Stabilizer Fins
5
72
: BTH042
4
6
1
– Button (Volume Down and Skip Back)
2
Multi-Function Control Button (MFB)
3
+ Button (Volume Up and Skip Forward)
4
LED Indicator (Power On, Pairing, Charging Indication)
5
Micro USB Charging Port (Under Water-Resistant Cover)
6
Microphone
2. Charging Your Ear Buds
IMPORTANT: Your iHome ear buds operate on a built-in rechargeable lithium-ion
battery. Although the battery was fully charged when it left our factory, like all batteries
it can experience some power drain during periods of non-use. For best results we
recommend that you charge the battery for approximately 3 hours before using your
ear buds for the first time.
1. Lift up the water resistant cover to expose the micro USB
charging port.
2. Connect the micro USB plug on the charging cable to the
micro USB port on the headphone. NOTE: The micro
USB plug can only be inserted into the micro USB
charging port one way. To avoid damaging the
connection make sure the plug is properly aligned with
the charging port.
OPERATING INSTRUCTIONS
It is not necessary to use the same size cushions and fins. You may find for example
that using the ‘M’ size cushions with the ‘S’ size fins is most comfortable for you. That
is a matter of personal choice.
NOTE: The first time you perform this operation you might find it convenient to place
only the left ear bud in your left ear. This will allow you to hold the control dongle in
your right hand so that you can see the control buttons and the LED indicator and still
hear the confirmation tones in your left ear. Once the ear buds have turned on and
paired with your Bluetooth device you can then place the right ear bud in your right ear.
2. Power On / Auto-Linking Mode
PRESS and HOLD the Multi-Function Button (MFB) on the control dongle for
approximately 2 seconds until you hear the three ascending beep tones that indicate
the power is ‘On’. The blue LED begins flashing two times per second indicating that
your ear buds are in the Auto-Linking Mode and trying to re-link to a previously paired
device as long as that device is within the normal pairing range of approximately
33-feet. If your ear buds do not find a previously paired device that is in range and
turned ‘on’ within 3 minutes they will switch from the Auto-Linking mode to the
Power ‘Off’ mode to extend the battery life.
3. Power Off
To shut the power ‘Off’ at any time PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 2 seconds. You will hear three
descending beep tones, the red LED flashes once and then the power shuts off.
4. Manually Pairing Your iHome Ear Buds With Your Bluetooth Device
NOTE: Your ear buds must be ‘Off’’ to begin the manual pairing process.
With the ear buds in the ‘Off’ mode, PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 4 seconds until you see the LED
indicator alternately flashing blue and red. Release the Multi-Function Button (MFB).
Make sure that your Bluetooth device is turned ‘On’ and in the Pairing mode. Refer
to the instructions supplied with your device if necessary. When your device “finds”
the iB72 ear buds, you will see “iHome iB72” appear on your devices Bluetooth
menu screen together with the words “Not Paired”, “Not Connected” or similar.
Touch “iHome iB72” to complete the pairing process. You will hear a single beep,
and you will see “iHome iB72 Connected” on your devices Bluetooth menu. NOTE:
If your Bluetooth device asks for a Password or a PIN to complete the pairing
process, enter “0000” on the keypad of your device.
You are now ready to begin streaming music wirelessly from your Bluetooth device
to your iHome iB72 Bluetooth ear buds.
Action Required
Turn Ear Buds 'On'
When ear buds are 'Off press and hold the MFB for 2 seconds until you hear the
3 ascending beep tones. The LED indicator flashes blue.
When ear buds are 'Off' press and hold the MFB for 4 seconds until you see the
LED indicator alternately flashing red and blue.
Make sure your Bluetooth device is 'On' and in the Pairing Mode. When
iHome iB72 appears on your devices menu, select it to complete pairing.
Short press the MFB to start playback. Short press to pause playback.
Short press to resume playback.
Short press the "+" button during playback
Short press the " - " button during playback
Short press the " - " button twice during playback
Press and hold the "+" button during playback
Press and hold the " - " button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will
automatically pause when you are answering a call and resume when you end the call.
Press and hold the MFB for 1 - 2 seconds to decline the incoming call.
Short press the MFB to end the call and 'hang up'.
While the call is in progress press and hold the MFB for 2 seconds
(transfers call from ear buds to phone or the reverse)
When phone is paired with ear buds but no call is in progress double press the
MFB to redial the last number.
While a call is in progress, double press the MFB to put the call on hold
and answer a second caller. Double press MFB again to switch between calls.
Short press the MFB to end current call and return to remaining call.
Press and hold the MFB for 2 seconds until you hear the three descending beep
tones. The LED indicator turns red and then shuts off.
Enter the Pairing Mode
Pairing
Play / Pause
Skip to next track
Skip to beginning of current track
Skip to beginning of previous track
Increase volume
Decrease volume
Answer an incoming phone call
Decline an incoming phone call
End a call
Transfer a call between the
phone and the ear buds
Last number redial
Answer second call/Call waiting
Turn Ear Buds Off
LED light indicator
Lower battery
Charging
Bluetooth connected
Bluetooth not connected
Bluetooth pairing
2
FCC Information
Function
Red LED light is blinking
Red LED is lit when charging / Blue LED is lit when fully charged
Blue LED is blinking slowly
Blue LED is blinking quickly
Blue & Red LED light is blinking at the same time alternately
Limited One-Year Warranty Information
FCC ID: RMZ-BTH04
IC: 986B-IB72
Declaration ID: D024204
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants
this product to be free from defects in workmanship and materials, under normal use and
conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the
store where it was originally purchased. Should this fail to resolve the matter and service
still be required by reason of any defect or malfunction during the warranty period, SDI will
repair or, at its discretion, replace this product without charge. This decision is subject to
verification of the defect or malfunction upon delivery of this product to the Factory Service
Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return
Authorization Number and shipping instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was
designed. It does not cover (i) products which have been damaged by negligence or willful
actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage
to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this
product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners
of the product other than to the original purchaser. In no event will SDI or any of its affiliates,
contractors, resellers, their officers, directors, shareholders, members or agents be liable
to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties
or exclusion of consequential damages, so these restrictions may not apply to you.) This
warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money
order, cashier's check, or credit card) for purchase of your SDI product.
© 2015 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
5. Using Your iHome Bluetooth Ear Buds
The chart on Page 4 explains the basic functions and operations of your Bluetooth
ear buds.
3
R
These earbuds come preinstalled with the medium
size cushions. If you find that the medium size
cushions are either too large or too small for your
ears you can easily replace them with the small or
large cushions. Additionally, if you would like to wear
these earbuds during active use, you may want to
select a comfortable size of in-ear ‘fins’ for added
stability. To change to a different size cushions or
fins, first simply pull the cushion off the tube, then
position the desired size of fin on the ear bud
housing as shown, and then replace the desired size cushion Be sure to match the
‘L' and ‘R' fins with the corresponding earbuds, the ‘fins’ should hook into the front
part of your ear as shown in the illustration.
IMPORTANT: Make sure that the cushion is firmly seated on the tube so that the
cushion does not remain in your ear canal when you remove the ear buds.
1
1. Switching Your Ear Buds On and Off
L
4
iB72-051115-C (EN)
Printed in China
Model: iB72
IB English/French (Front)
Color: 1 C + 1C - Black text on white paper
Size: 360 W x 270 H (mm)
Date: May 11, 2015
Introduction
Specifications
Your new iHome Bluetooth stereo ear buds are designed to link with your Bluetooth
BT specification
BT profiles supported
BT IC
Frequency Range
Rechargeable Battery
Operating distance
Impedance (speaker)
Speaker dimension
Working electric current
Working Voltage
Talk time
Music time
Standby time
Charging time
enabled smartphone or music player to allow you to wirelessly listen to music and answer
phone calls within the normal 10 meter (33 feet) Bluetooth operating range.
iB72
Your ear buds are supplied with 3 sizes of ear cushions and 3 sets of ‘fin’ type stabilizers,
to allow you to customize your ear buds for maximum wearing comfort and stability
during all kinds of exercise and physical activities.
wireless earbuds with mic + remote
Please review this manual carefully to make sure you are getting the maximum benefit
User Manual
from all of the features of your new ear buds, and keep this manual for future reference.
What’s Included
3. Connect the standard USB plug on the charging cable to any standard USB power
port such as found on a notebook computer, or the charging adapter for an iPod,
iPhone, etc.
4. The Power/Charging/Pairing indicator will glow RED while the ear buds are
charging. The indicator will turn BLUE when the battery is fully charged, indicating
that your ear buds are ready for use.
V4.1
A2DP, AVRCP, GAVDP, GAP, HSP
CSR8645
20Hz - 20kHz
45mAh Li-Polymer x 2
10 Meter without any obstacle
16ohm
Ф 6mm
15mA
3~4.2V
5 hours (with fully charged battery)
5 hours (with fully charged battery)
48 hours (under paired)
about 2 hours
3. Wearing Your Ear Buds
Your iHome ear buds are supplied with 3 sizes of ear
cushions and 3 sizes of flexible stabilizer ‘fins’. The
ear buds are clearly marked with ‘L’ and ‘R’
indications. Place the ‘L’ ear bud in your left ear and
the ‘R’ ear buds in your right ear as shown in the
illustration.
When worn properly the control dongle will be on
your right side. Some users prefer to wear the ear
buds with the cable behind their neck. Others may
prefer to have the cable in front of their neck. Either
wearing style is acceptable.
PREPARATION FOR USE
1. Controls and Indicators
1
USB Charging Cable x
2
1
3
iB72 Stereo ear buds
with control dongle
Mx 2
Lx 2
SIZE
SIZE
Sx 2
SIZE
Silicon Ear Cushions
L x 1set
SIZE
M x 1set
SIZE
S x 1set
SIZE
Stabilizer Fins
5
72
: BTH042
4
6
1
– Button (Volume Down and Skip Back)
2
Multi-Function Control Button (MFB)
3
+ Button (Volume Up and Skip Forward)
4
LED Indicator (Power On, Pairing, Charging Indication)
5
Micro USB Charging Port (Under Water-Resistant Cover)
6
Microphone
2. Charging Your Ear Buds
IMPORTANT: Your iHome ear buds operate on a built-in rechargeable lithium-ion
battery. Although the battery was fully charged when it left our factory, like all batteries
it can experience some power drain during periods of non-use. For best results we
recommend that you charge the battery for approximately 3 hours before using your
ear buds for the first time.
1. Lift up the water resistant cover to expose the micro USB
charging port.
2. Connect the micro USB plug on the charging cable to the
micro USB port on the headphone. NOTE: The micro
USB plug can only be inserted into the micro USB
charging port one way. To avoid damaging the
connection make sure the plug is properly aligned with
the charging port.
OPERATING INSTRUCTIONS
It is not necessary to use the same size cushions and fins. You may find for example
that using the ‘M’ size cushions with the ‘S’ size fins is most comfortable for you. That
is a matter of personal choice.
NOTE: The first time you perform this operation you might find it convenient to place
only the left ear bud in your left ear. This will allow you to hold the control dongle in
your right hand so that you can see the control buttons and the LED indicator and still
hear the confirmation tones in your left ear. Once the ear buds have turned on and
paired with your Bluetooth device you can then place the right ear bud in your right ear.
2. Power On / Auto-Linking Mode
PRESS and HOLD the Multi-Function Button (MFB) on the control dongle for
approximately 2 seconds until you hear the three ascending beep tones that indicate
the power is ‘On’. The blue LED begins flashing two times per second indicating that
your ear buds are in the Auto-Linking Mode and trying to re-link to a previously paired
device as long as that device is within the normal pairing range of approximately
33-feet. If your ear buds do not find a previously paired device that is in range and
turned ‘on’ within 3 minutes they will switch from the Auto-Linking mode to the
Power ‘Off’ mode to extend the battery life.
3. Power Off
To shut the power ‘Off’ at any time PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 2 seconds. You will hear three
descending beep tones, the red LED flashes once and then the power shuts off.
4. Manually Pairing Your iHome Ear Buds With Your Bluetooth Device
NOTE: Your ear buds must be ‘Off’’ to begin the manual pairing process.
With the ear buds in the ‘Off’ mode, PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 4 seconds until you see the LED
indicator alternately flashing blue and red. Release the Multi-Function Button (MFB).
Make sure that your Bluetooth device is turned ‘On’ and in the Pairing mode. Refer
to the instructions supplied with your device if necessary. When your device “finds”
the iB72 ear buds, you will see “iHome iB72” appear on your devices Bluetooth
menu screen together with the words “Not Paired”, “Not Connected” or similar.
Touch “iHome iB72” to complete the pairing process. You will hear a single beep,
and you will see “iHome iB72 Connected” on your devices Bluetooth menu. NOTE:
If your Bluetooth device asks for a Password or a PIN to complete the pairing
process, enter “0000” on the keypad of your device.
You are now ready to begin streaming music wirelessly from your Bluetooth device
to your iHome iB72 Bluetooth ear buds.
Action Required
Turn Ear Buds 'On'
When ear buds are 'Off press and hold the MFB for 2 seconds until you hear the
3 ascending beep tones. The LED indicator flashes blue.
When ear buds are 'Off' press and hold the MFB for 4 seconds until you see the
LED indicator alternately flashing red and blue.
Make sure your Bluetooth device is 'On' and in the Pairing Mode. When
iHome iB72 appears on your devices menu, select it to complete pairing.
Short press the MFB to start playback. Short press to pause playback.
Short press to resume playback.
Short press the "+" button during playback
Short press the " - " button during playback
Short press the " - " button twice during playback
Press and hold the "+" button during playback
Press and hold the " - " button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will
automatically pause when you are answering a call and resume when you end the call.
Press and hold the MFB for 1 - 2 seconds to decline the incoming call.
Short press the MFB to end the call and 'hang up'.
While the call is in progress press and hold the MFB for 2 seconds
(transfers call from ear buds to phone or the reverse)
When phone is paired with ear buds but no call is in progress double press the
MFB to redial the last number.
While a call is in progress, double press the MFB to put the call on hold
and answer a second caller. Double press MFB again to switch between calls.
Short press the MFB to end current call and return to remaining call.
Press and hold the MFB for 2 seconds until you hear the three descending beep
tones. The LED indicator turns red and then shuts off.
Enter the Pairing Mode
Pairing
Play / Pause
Skip to next track
Skip to beginning of current track
Skip to beginning of previous track
Increase volume
Decrease volume
Answer an incoming phone call
Decline an incoming phone call
End a call
Transfer a call between the
phone and the ear buds
Last number redial
Answer second call/Call waiting
Turn Ear Buds Off
LED light indicator
Lower battery
Charging
Bluetooth connected
Bluetooth not connected
Bluetooth pairing
2
FCC Information
Function
Red LED light is blinking
Red LED is lit when charging / Blue LED is lit when fully charged
Blue LED is blinking slowly
Blue LED is blinking quickly
Blue & Red LED light is blinking at the same time alternately
Limited One-Year Warranty Information
FCC ID: RMZ-BTH04
IC: 986B-IB72
Declaration ID: D024204
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants
this product to be free from defects in workmanship and materials, under normal use and
conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the
store where it was originally purchased. Should this fail to resolve the matter and service
still be required by reason of any defect or malfunction during the warranty period, SDI will
repair or, at its discretion, replace this product without charge. This decision is subject to
verification of the defect or malfunction upon delivery of this product to the Factory Service
Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return
Authorization Number and shipping instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was
designed. It does not cover (i) products which have been damaged by negligence or willful
actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage
to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this
product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners
of the product other than to the original purchaser. In no event will SDI or any of its affiliates,
contractors, resellers, their officers, directors, shareholders, members or agents be liable
to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties
or exclusion of consequential damages, so these restrictions may not apply to you.) This
warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money
order, cashier's check, or credit card) for purchase of your SDI product.
© 2015 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
5. Using Your iHome Bluetooth Ear Buds
The chart on Page 4 explains the basic functions and operations of your Bluetooth
ear buds.
3
R
These earbuds come preinstalled with the medium
size cushions. If you find that the medium size
cushions are either too large or too small for your
ears you can easily replace them with the small or
large cushions. Additionally, if you would like to wear
these earbuds during active use, you may want to
select a comfortable size of in-ear ‘fins’ for added
stability. To change to a different size cushions or
fins, first simply pull the cushion off the tube, then
position the desired size of fin on the ear bud
housing as shown, and then replace the desired size cushion Be sure to match the
‘L' and ‘R' fins with the corresponding earbuds, the ‘fins’ should hook into the front
part of your ear as shown in the illustration.
IMPORTANT: Make sure that the cushion is firmly seated on the tube so that the
cushion does not remain in your ear canal when you remove the ear buds.
1
1. Switching Your Ear Buds On and Off
L
4
iB72-051115-C (EN)
Printed in China
Model: iB72
IB English/French (Front)
Color: 1 C + 1C - Black text on white paper
Size: 360 W x 270 H (mm)
Date: May 11, 2015
Introduction
Specifications
Your new iHome Bluetooth stereo ear buds are designed to link with your Bluetooth
BT specification
BT profiles supported
BT IC
Frequency Range
Rechargeable Battery
Operating distance
Impedance (speaker)
Speaker dimension
Working electric current
Working Voltage
Talk time
Music time
Standby time
Charging time
enabled smartphone or music player to allow you to wirelessly listen to music and answer
phone calls within the normal 10 meter (33 feet) Bluetooth operating range.
iB72
Your ear buds are supplied with 3 sizes of ear cushions and 3 sets of ‘fin’ type stabilizers,
to allow you to customize your ear buds for maximum wearing comfort and stability
during all kinds of exercise and physical activities.
wireless earbuds with mic + remote
Please review this manual carefully to make sure you are getting the maximum benefit
User Manual
from all of the features of your new ear buds, and keep this manual for future reference.
What’s Included
3. Connect the standard USB plug on the charging cable to any standard USB power
port such as found on a notebook computer, or the charging adapter for an iPod,
iPhone, etc.
4. The Power/Charging/Pairing indicator will glow RED while the ear buds are
charging. The indicator will turn BLUE when the battery is fully charged, indicating
that your ear buds are ready for use.
V4.1
A2DP, AVRCP, GAVDP, GAP, HSP
CSR8645
20Hz - 20kHz
45mAh Li-Polymer x 2
10 Meter without any obstacle
16ohm
Ф 6mm
15mA
3~4.2V
5 hours (with fully charged battery)
5 hours (with fully charged battery)
48 hours (under paired)
about 2 hours
3. Wearing Your Ear Buds
Your iHome ear buds are supplied with 3 sizes of ear
cushions and 3 sizes of flexible stabilizer ‘fins’. The
ear buds are clearly marked with ‘L’ and ‘R’
indications. Place the ‘L’ ear bud in your left ear and
the ‘R’ ear buds in your right ear as shown in the
illustration.
When worn properly the control dongle will be on
your right side. Some users prefer to wear the ear
buds with the cable behind their neck. Others may
prefer to have the cable in front of their neck. Either
wearing style is acceptable.
PREPARATION FOR USE
1. Controls and Indicators
1
USB Charging Cable x
2
1
3
iB72 Stereo ear buds
with control dongle
Mx 2
Lx 2
SIZE
SIZE
Sx 2
SIZE
Silicon Ear Cushions
L x 1set
SIZE
M x 1set
SIZE
S x 1set
SIZE
Stabilizer Fins
5
72
: BTH042
4
6
1
– Button (Volume Down and Skip Back)
2
Multi-Function Control Button (MFB)
3
+ Button (Volume Up and Skip Forward)
4
LED Indicator (Power On, Pairing, Charging Indication)
5
Micro USB Charging Port (Under Water-Resistant Cover)
6
Microphone
2. Charging Your Ear Buds
IMPORTANT: Your iHome ear buds operate on a built-in rechargeable lithium-ion
battery. Although the battery was fully charged when it left our factory, like all batteries
it can experience some power drain during periods of non-use. For best results we
recommend that you charge the battery for approximately 3 hours before using your
ear buds for the first time.
1. Lift up the water resistant cover to expose the micro USB
charging port.
2. Connect the micro USB plug on the charging cable to the
micro USB port on the headphone. NOTE: The micro
USB plug can only be inserted into the micro USB
charging port one way. To avoid damaging the
connection make sure the plug is properly aligned with
the charging port.
OPERATING INSTRUCTIONS
It is not necessary to use the same size cushions and fins. You may find for example
that using the ‘M’ size cushions with the ‘S’ size fins is most comfortable for you. That
is a matter of personal choice.
NOTE: The first time you perform this operation you might find it convenient to place
only the left ear bud in your left ear. This will allow you to hold the control dongle in
your right hand so that you can see the control buttons and the LED indicator and still
hear the confirmation tones in your left ear. Once the ear buds have turned on and
paired with your Bluetooth device you can then place the right ear bud in your right ear.
2. Power On / Auto-Linking Mode
PRESS and HOLD the Multi-Function Button (MFB) on the control dongle for
approximately 2 seconds until you hear the three ascending beep tones that indicate
the power is ‘On’. The blue LED begins flashing two times per second indicating that
your ear buds are in the Auto-Linking Mode and trying to re-link to a previously paired
device as long as that device is within the normal pairing range of approximately
33-feet. If your ear buds do not find a previously paired device that is in range and
turned ‘on’ within 3 minutes they will switch from the Auto-Linking mode to the
Power ‘Off’ mode to extend the battery life.
3. Power Off
To shut the power ‘Off’ at any time PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 2 seconds. You will hear three
descending beep tones, the red LED flashes once and then the power shuts off.
4. Manually Pairing Your iHome Ear Buds With Your Bluetooth Device
NOTE: Your ear buds must be ‘Off’’ to begin the manual pairing process.
With the ear buds in the ‘Off’ mode, PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 4 seconds until you see the LED
indicator alternately flashing blue and red. Release the Multi-Function Button (MFB).
Make sure that your Bluetooth device is turned ‘On’ and in the Pairing mode. Refer
to the instructions supplied with your device if necessary. When your device “finds”
the iB72 ear buds, you will see “iHome iB72” appear on your devices Bluetooth
menu screen together with the words “Not Paired”, “Not Connected” or similar.
Touch “iHome iB72” to complete the pairing process. You will hear a single beep,
and you will see “iHome iB72 Connected” on your devices Bluetooth menu. NOTE:
If your Bluetooth device asks for a Password or a PIN to complete the pairing
process, enter “0000” on the keypad of your device.
You are now ready to begin streaming music wirelessly from your Bluetooth device
to your iHome iB72 Bluetooth ear buds.
Action Required
Turn Ear Buds 'On'
When ear buds are 'Off press and hold the MFB for 2 seconds until you hear the
3 ascending beep tones. The LED indicator flashes blue.
When ear buds are 'Off' press and hold the MFB for 4 seconds until you see the
LED indicator alternately flashing red and blue.
Make sure your Bluetooth device is 'On' and in the Pairing Mode. When
iHome iB72 appears on your devices menu, select it to complete pairing.
Short press the MFB to start playback. Short press to pause playback.
Short press to resume playback.
Short press the "+" button during playback
Short press the " - " button during playback
Short press the " - " button twice during playback
Press and hold the "+" button during playback
Press and hold the " - " button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will
automatically pause when you are answering a call and resume when you end the call.
Press and hold the MFB for 1 - 2 seconds to decline the incoming call.
Short press the MFB to end the call and 'hang up'.
While the call is in progress press and hold the MFB for 2 seconds
(transfers call from ear buds to phone or the reverse)
When phone is paired with ear buds but no call is in progress double press the
MFB to redial the last number.
While a call is in progress, double press the MFB to put the call on hold
and answer a second caller. Double press MFB again to switch between calls.
Short press the MFB to end current call and return to remaining call.
Press and hold the MFB for 2 seconds until you hear the three descending beep
tones. The LED indicator turns red and then shuts off.
Enter the Pairing Mode
Pairing
Play / Pause
Skip to next track
Skip to beginning of current track
Skip to beginning of previous track
Increase volume
Decrease volume
Answer an incoming phone call
Decline an incoming phone call
End a call
Transfer a call between the
phone and the ear buds
Last number redial
Answer second call/Call waiting
Turn Ear Buds Off
LED light indicator
Lower battery
Charging
Bluetooth connected
Bluetooth not connected
Bluetooth pairing
2
FCC Information
Function
Red LED light is blinking
Red LED is lit when charging / Blue LED is lit when fully charged
Blue LED is blinking slowly
Blue LED is blinking quickly
Blue & Red LED light is blinking at the same time alternately
Limited One-Year Warranty Information
FCC ID: RMZ-BTH04
IC: 986B-IB72
Declaration ID: D024204
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants
this product to be free from defects in workmanship and materials, under normal use and
conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the
store where it was originally purchased. Should this fail to resolve the matter and service
still be required by reason of any defect or malfunction during the warranty period, SDI will
repair or, at its discretion, replace this product without charge. This decision is subject to
verification of the defect or malfunction upon delivery of this product to the Factory Service
Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return
Authorization Number and shipping instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was
designed. It does not cover (i) products which have been damaged by negligence or willful
actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage
to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this
product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners
of the product other than to the original purchaser. In no event will SDI or any of its affiliates,
contractors, resellers, their officers, directors, shareholders, members or agents be liable
to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties
or exclusion of consequential damages, so these restrictions may not apply to you.) This
warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money
order, cashier's check, or credit card) for purchase of your SDI product.
© 2015 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
5. Using Your iHome Bluetooth Ear Buds
The chart on Page 4 explains the basic functions and operations of your Bluetooth
ear buds.
3
R
These earbuds come preinstalled with the medium
size cushions. If you find that the medium size
cushions are either too large or too small for your
ears you can easily replace them with the small or
large cushions. Additionally, if you would like to wear
these earbuds during active use, you may want to
select a comfortable size of in-ear ‘fins’ for added
stability. To change to a different size cushions or
fins, first simply pull the cushion off the tube, then
position the desired size of fin on the ear bud
housing as shown, and then replace the desired size cushion Be sure to match the
‘L' and ‘R' fins with the corresponding earbuds, the ‘fins’ should hook into the front
part of your ear as shown in the illustration.
IMPORTANT: Make sure that the cushion is firmly seated on the tube so that the
cushion does not remain in your ear canal when you remove the ear buds.
1
1. Switching Your Ear Buds On and Off
L
4
iB72-051115-C (EN)
Printed in China
Model: iB72
IB English/French (Front)
Color: 1 C + 1C - Black text on white paper
Size: 360 W x 270 H (mm)
Date: May 11, 2015
Introduction
Specifications
Your new iHome Bluetooth stereo ear buds are designed to link with your Bluetooth
BT specification
BT profiles supported
BT IC
Frequency Range
Rechargeable Battery
Operating distance
Impedance (speaker)
Speaker dimension
Working electric current
Working Voltage
Talk time
Music time
Standby time
Charging time
enabled smartphone or music player to allow you to wirelessly listen to music and answer
phone calls within the normal 10 meter (33 feet) Bluetooth operating range.
iB72
Your ear buds are supplied with 3 sizes of ear cushions and 3 sets of ‘fin’ type stabilizers,
to allow you to customize your ear buds for maximum wearing comfort and stability
during all kinds of exercise and physical activities.
wireless earbuds with mic + remote
Please review this manual carefully to make sure you are getting the maximum benefit
User Manual
from all of the features of your new ear buds, and keep this manual for future reference.
What’s Included
3. Connect the standard USB plug on the charging cable to any standard USB power
port such as found on a notebook computer, or the charging adapter for an iPod,
iPhone, etc.
4. The Power/Charging/Pairing indicator will glow RED while the ear buds are
charging. The indicator will turn BLUE when the battery is fully charged, indicating
that your ear buds are ready for use.
V4.1
A2DP, AVRCP, GAVDP, GAP, HSP
CSR8645
20Hz - 20kHz
45mAh Li-Polymer x 2
10 Meter without any obstacle
16ohm
Ф 6mm
15mA
3~4.2V
5 hours (with fully charged battery)
5 hours (with fully charged battery)
48 hours (under paired)
about 2 hours
3. Wearing Your Ear Buds
Your iHome ear buds are supplied with 3 sizes of ear
cushions and 3 sizes of flexible stabilizer ‘fins’. The
ear buds are clearly marked with ‘L’ and ‘R’
indications. Place the ‘L’ ear bud in your left ear and
the ‘R’ ear buds in your right ear as shown in the
illustration.
When worn properly the control dongle will be on
your right side. Some users prefer to wear the ear
buds with the cable behind their neck. Others may
prefer to have the cable in front of their neck. Either
wearing style is acceptable.
PREPARATION FOR USE
1. Controls and Indicators
1
USB Charging Cable x
2
1
3
iB72 Stereo ear buds
with control dongle
Mx 2
Lx 2
SIZE
SIZE
Sx 2
SIZE
Silicon Ear Cushions
L x 1set
SIZE
M x 1set
SIZE
S x 1set
SIZE
Stabilizer Fins
5
72
: BTH042
4
6
1
– Button (Volume Down and Skip Back)
2
Multi-Function Control Button (MFB)
3
+ Button (Volume Up and Skip Forward)
4
LED Indicator (Power On, Pairing, Charging Indication)
5
Micro USB Charging Port (Under Water-Resistant Cover)
6
Microphone
2. Charging Your Ear Buds
IMPORTANT: Your iHome ear buds operate on a built-in rechargeable lithium-ion
battery. Although the battery was fully charged when it left our factory, like all batteries
it can experience some power drain during periods of non-use. For best results we
recommend that you charge the battery for approximately 3 hours before using your
ear buds for the first time.
1. Lift up the water resistant cover to expose the micro USB
charging port.
2. Connect the micro USB plug on the charging cable to the
micro USB port on the headphone. NOTE: The micro
USB plug can only be inserted into the micro USB
charging port one way. To avoid damaging the
connection make sure the plug is properly aligned with
the charging port.
OPERATING INSTRUCTIONS
It is not necessary to use the same size cushions and fins. You may find for example
that using the ‘M’ size cushions with the ‘S’ size fins is most comfortable for you. That
is a matter of personal choice.
NOTE: The first time you perform this operation you might find it convenient to place
only the left ear bud in your left ear. This will allow you to hold the control dongle in
your right hand so that you can see the control buttons and the LED indicator and still
hear the confirmation tones in your left ear. Once the ear buds have turned on and
paired with your Bluetooth device you can then place the right ear bud in your right ear.
2. Power On / Auto-Linking Mode
PRESS and HOLD the Multi-Function Button (MFB) on the control dongle for
approximately 2 seconds until you hear the three ascending beep tones that indicate
the power is ‘On’. The blue LED begins flashing two times per second indicating that
your ear buds are in the Auto-Linking Mode and trying to re-link to a previously paired
device as long as that device is within the normal pairing range of approximately
33-feet. If your ear buds do not find a previously paired device that is in range and
turned ‘on’ within 3 minutes they will switch from the Auto-Linking mode to the
Power ‘Off’ mode to extend the battery life.
3. Power Off
To shut the power ‘Off’ at any time PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 2 seconds. You will hear three
descending beep tones, the red LED flashes once and then the power shuts off.
4. Manually Pairing Your iHome Ear Buds With Your Bluetooth Device
NOTE: Your ear buds must be ‘Off’’ to begin the manual pairing process.
With the ear buds in the ‘Off’ mode, PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 4 seconds until you see the LED
indicator alternately flashing blue and red. Release the Multi-Function Button (MFB).
Make sure that your Bluetooth device is turned ‘On’ and in the Pairing mode. Refer
to the instructions supplied with your device if necessary. When your device “finds”
the iB72 ear buds, you will see “iHome iB72” appear on your devices Bluetooth
menu screen together with the words “Not Paired”, “Not Connected” or similar.
Touch “iHome iB72” to complete the pairing process. You will hear a single beep,
and you will see “iHome iB72 Connected” on your devices Bluetooth menu. NOTE:
If your Bluetooth device asks for a Password or a PIN to complete the pairing
process, enter “0000” on the keypad of your device.
You are now ready to begin streaming music wirelessly from your Bluetooth device
to your iHome iB72 Bluetooth ear buds.
Action Required
Turn Ear Buds 'On'
When ear buds are 'Off press and hold the MFB for 2 seconds until you hear the
3 ascending beep tones. The LED indicator flashes blue.
When ear buds are 'Off' press and hold the MFB for 4 seconds until you see the
LED indicator alternately flashing red and blue.
Make sure your Bluetooth device is 'On' and in the Pairing Mode. When
iHome iB72 appears on your devices menu, select it to complete pairing.
Short press the MFB to start playback. Short press to pause playback.
Short press to resume playback.
Short press the "+" button during playback
Short press the " - " button during playback
Short press the " - " button twice during playback
Press and hold the "+" button during playback
Press and hold the " - " button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will
automatically pause when you are answering a call and resume when you end the call.
Press and hold the MFB for 1 - 2 seconds to decline the incoming call.
Short press the MFB to end the call and 'hang up'.
While the call is in progress press and hold the MFB for 2 seconds
(transfers call from ear buds to phone or the reverse)
When phone is paired with ear buds but no call is in progress double press the
MFB to redial the last number.
While a call is in progress, double press the MFB to put the call on hold
and answer a second caller. Double press MFB again to switch between calls.
Short press the MFB to end current call and return to remaining call.
Press and hold the MFB for 2 seconds until you hear the three descending beep
tones. The LED indicator turns red and then shuts off.
Enter the Pairing Mode
Pairing
Play / Pause
Skip to next track
Skip to beginning of current track
Skip to beginning of previous track
Increase volume
Decrease volume
Answer an incoming phone call
Decline an incoming phone call
End a call
Transfer a call between the
phone and the ear buds
Last number redial
Answer second call/Call waiting
Turn Ear Buds Off
LED light indicator
Lower battery
Charging
Bluetooth connected
Bluetooth not connected
Bluetooth pairing
2
FCC Information
Function
Red LED light is blinking
Red LED is lit when charging / Blue LED is lit when fully charged
Blue LED is blinking slowly
Blue LED is blinking quickly
Blue & Red LED light is blinking at the same time alternately
Limited One-Year Warranty Information
FCC ID: RMZ-BTH04
IC: 986B-IB72
Declaration ID: D024204
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants
this product to be free from defects in workmanship and materials, under normal use and
conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the
store where it was originally purchased. Should this fail to resolve the matter and service
still be required by reason of any defect or malfunction during the warranty period, SDI will
repair or, at its discretion, replace this product without charge. This decision is subject to
verification of the defect or malfunction upon delivery of this product to the Factory Service
Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return
Authorization Number and shipping instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was
designed. It does not cover (i) products which have been damaged by negligence or willful
actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage
to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this
product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners
of the product other than to the original purchaser. In no event will SDI or any of its affiliates,
contractors, resellers, their officers, directors, shareholders, members or agents be liable
to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties
or exclusion of consequential damages, so these restrictions may not apply to you.) This
warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money
order, cashier's check, or credit card) for purchase of your SDI product.
© 2015 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
5. Using Your iHome Bluetooth Ear Buds
The chart on Page 4 explains the basic functions and operations of your Bluetooth
ear buds.
3
R
These earbuds come preinstalled with the medium
size cushions. If you find that the medium size
cushions are either too large or too small for your
ears you can easily replace them with the small or
large cushions. Additionally, if you would like to wear
these earbuds during active use, you may want to
select a comfortable size of in-ear ‘fins’ for added
stability. To change to a different size cushions or
fins, first simply pull the cushion off the tube, then
position the desired size of fin on the ear bud
housing as shown, and then replace the desired size cushion Be sure to match the
‘L' and ‘R' fins with the corresponding earbuds, the ‘fins’ should hook into the front
part of your ear as shown in the illustration.
IMPORTANT: Make sure that the cushion is firmly seated on the tube so that the
cushion does not remain in your ear canal when you remove the ear buds.
1
1. Switching Your Ear Buds On and Off
L
4
iB72-051115-C (EN)
Printed in China
Model: iB72
IB English/French (Front)
Color: 1 C + 1C - Black text on white paper
Size: 360 W x 270 H (mm)
Date: May 11, 2015
Introduction
Specifications
Your new iHome Bluetooth stereo ear buds are designed to link with your Bluetooth
BT specification
BT profiles supported
BT IC
Frequency Range
Rechargeable Battery
Operating distance
Impedance (speaker)
Speaker dimension
Working electric current
Working Voltage
Talk time
Music time
Standby time
Charging time
enabled smartphone or music player to allow you to wirelessly listen to music and answer
phone calls within the normal 10 meter (33 feet) Bluetooth operating range.
iB72
Your ear buds are supplied with 3 sizes of ear cushions and 3 sets of ‘fin’ type stabilizers,
to allow you to customize your ear buds for maximum wearing comfort and stability
during all kinds of exercise and physical activities.
wireless earbuds with mic + remote
Please review this manual carefully to make sure you are getting the maximum benefit
User Manual
from all of the features of your new ear buds, and keep this manual for future reference.
What’s Included
3. Connect the standard USB plug on the charging cable to any standard USB power
port such as found on a notebook computer, or the charging adapter for an iPod,
iPhone, etc.
4. The Power/Charging/Pairing indicator will glow RED while the ear buds are
charging. The indicator will turn BLUE when the battery is fully charged, indicating
that your ear buds are ready for use.
V4.1
A2DP, AVRCP, GAVDP, GAP, HSP
CSR8645
20Hz - 20kHz
45mAh Li-Polymer x 2
10 Meter without any obstacle
16ohm
Ф 6mm
15mA
3~4.2V
5 hours (with fully charged battery)
5 hours (with fully charged battery)
48 hours (under paired)
about 2 hours
3. Wearing Your Ear Buds
Your iHome ear buds are supplied with 3 sizes of ear
cushions and 3 sizes of flexible stabilizer ‘fins’. The
ear buds are clearly marked with ‘L’ and ‘R’
indications. Place the ‘L’ ear bud in your left ear and
the ‘R’ ear buds in your right ear as shown in the
illustration.
When worn properly the control dongle will be on
your right side. Some users prefer to wear the ear
buds with the cable behind their neck. Others may
prefer to have the cable in front of their neck. Either
wearing style is acceptable.
PREPARATION FOR USE
1. Controls and Indicators
1
USB Charging Cable x
2
1
3
iB72 Stereo ear buds
with control dongle
Mx 2
Lx 2
SIZE
SIZE
Sx 2
SIZE
Silicon Ear Cushions
L x 1set
SIZE
M x 1set
SIZE
S x 1set
SIZE
Stabilizer Fins
5
72
: BTH042
4
6
1
– Button (Volume Down and Skip Back)
2
Multi-Function Control Button (MFB)
3
+ Button (Volume Up and Skip Forward)
4
LED Indicator (Power On, Pairing, Charging Indication)
5
Micro USB Charging Port (Under Water-Resistant Cover)
6
Microphone
2. Charging Your Ear Buds
IMPORTANT: Your iHome ear buds operate on a built-in rechargeable lithium-ion
battery. Although the battery was fully charged when it left our factory, like all batteries
it can experience some power drain during periods of non-use. For best results we
recommend that you charge the battery for approximately 3 hours before using your
ear buds for the first time.
1. Lift up the water resistant cover to expose the micro USB
charging port.
2. Connect the micro USB plug on the charging cable to the
micro USB port on the headphone. NOTE: The micro
USB plug can only be inserted into the micro USB
charging port one way. To avoid damaging the
connection make sure the plug is properly aligned with
the charging port.
OPERATING INSTRUCTIONS
It is not necessary to use the same size cushions and fins. You may find for example
that using the ‘M’ size cushions with the ‘S’ size fins is most comfortable for you. That
is a matter of personal choice.
NOTE: The first time you perform this operation you might find it convenient to place
only the left ear bud in your left ear. This will allow you to hold the control dongle in
your right hand so that you can see the control buttons and the LED indicator and still
hear the confirmation tones in your left ear. Once the ear buds have turned on and
paired with your Bluetooth device you can then place the right ear bud in your right ear.
2. Power On / Auto-Linking Mode
PRESS and HOLD the Multi-Function Button (MFB) on the control dongle for
approximately 2 seconds until you hear the three ascending beep tones that indicate
the power is ‘On’. The blue LED begins flashing two times per second indicating that
your ear buds are in the Auto-Linking Mode and trying to re-link to a previously paired
device as long as that device is within the normal pairing range of approximately
33-feet. If your ear buds do not find a previously paired device that is in range and
turned ‘on’ within 3 minutes they will switch from the Auto-Linking mode to the
Power ‘Off’ mode to extend the battery life.
3. Power Off
To shut the power ‘Off’ at any time PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 2 seconds. You will hear three
descending beep tones, the red LED flashes once and then the power shuts off.
4. Manually Pairing Your iHome Ear Buds With Your Bluetooth Device
NOTE: Your ear buds must be ‘Off’’ to begin the manual pairing process.
With the ear buds in the ‘Off’ mode, PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 4 seconds until you see the LED
indicator alternately flashing blue and red. Release the Multi-Function Button (MFB).
Make sure that your Bluetooth device is turned ‘On’ and in the Pairing mode. Refer
to the instructions supplied with your device if necessary. When your device “finds”
the iB72 ear buds, you will see “iHome iB72” appear on your devices Bluetooth
menu screen together with the words “Not Paired”, “Not Connected” or similar.
Touch “iHome iB72” to complete the pairing process. You will hear a single beep,
and you will see “iHome iB72 Connected” on your devices Bluetooth menu. NOTE:
If your Bluetooth device asks for a Password or a PIN to complete the pairing
process, enter “0000” on the keypad of your device.
You are now ready to begin streaming music wirelessly from your Bluetooth device
to your iHome iB72 Bluetooth ear buds.
Action Required
Turn Ear Buds 'On'
When ear buds are 'Off press and hold the MFB for 2 seconds until you hear the
3 ascending beep tones. The LED indicator flashes blue.
When ear buds are 'Off' press and hold the MFB for 4 seconds until you see the
LED indicator alternately flashing red and blue.
Make sure your Bluetooth device is 'On' and in the Pairing Mode. When
iHome iB72 appears on your devices menu, select it to complete pairing.
Short press the MFB to start playback. Short press to pause playback.
Short press to resume playback.
Short press the "+" button during playback
Short press the " - " button during playback
Short press the " - " button twice during playback
Press and hold the "+" button during playback
Press and hold the " - " button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will
automatically pause when you are answering a call and resume when you end the call.
Press and hold the MFB for 1 - 2 seconds to decline the incoming call.
Short press the MFB to end the call and 'hang up'.
While the call is in progress press and hold the MFB for 2 seconds
(transfers call from ear buds to phone or the reverse)
When phone is paired with ear buds but no call is in progress double press the
MFB to redial the last number.
While a call is in progress, double press the MFB to put the call on hold
and answer a second caller. Double press MFB again to switch between calls.
Short press the MFB to end current call and return to remaining call.
Press and hold the MFB for 2 seconds until you hear the three descending beep
tones. The LED indicator turns red and then shuts off.
Enter the Pairing Mode
Pairing
Play / Pause
Skip to next track
Skip to beginning of current track
Skip to beginning of previous track
Increase volume
Decrease volume
Answer an incoming phone call
Decline an incoming phone call
End a call
Transfer a call between the
phone and the ear buds
Last number redial
Answer second call/Call waiting
Turn Ear Buds Off
LED light indicator
Lower battery
Charging
Bluetooth connected
Bluetooth not connected
Bluetooth pairing
2
FCC Information
Function
Red LED light is blinking
Red LED is lit when charging / Blue LED is lit when fully charged
Blue LED is blinking slowly
Blue LED is blinking quickly
Blue & Red LED light is blinking at the same time alternately
Limited One-Year Warranty Information
FCC ID: RMZ-BTH04
IC: 986B-IB72
Declaration ID: D024204
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102
and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF
exposure and compliance.
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants
this product to be free from defects in workmanship and materials, under normal use and
conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the
store where it was originally purchased. Should this fail to resolve the matter and service
still be required by reason of any defect or malfunction during the warranty period, SDI will
repair or, at its discretion, replace this product without charge. This decision is subject to
verification of the defect or malfunction upon delivery of this product to the Factory Service
Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return
Authorization Number and shipping instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was
designed. It does not cover (i) products which have been damaged by negligence or willful
actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage
to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this
product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners
of the product other than to the original purchaser. In no event will SDI or any of its affiliates,
contractors, resellers, their officers, directors, shareholders, members or agents be liable
to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties
or exclusion of consequential damages, so these restrictions may not apply to you.) This
warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money
order, cashier's check, or credit card) for purchase of your SDI product.
© 2015 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
5. Using Your iHome Bluetooth Ear Buds
The chart on Page 4 explains the basic functions and operations of your Bluetooth
ear buds.
3
R
These earbuds come preinstalled with the medium
size cushions. If you find that the medium size
cushions are either too large or too small for your
ears you can easily replace them with the small or
large cushions. Additionally, if you would like to wear
these earbuds during active use, you may want to
select a comfortable size of in-ear ‘fins’ for added
stability. To change to a different size cushions or
fins, first simply pull the cushion off the tube, then
position the desired size of fin on the ear bud
housing as shown, and then replace the desired size cushion Be sure to match the
‘L' and ‘R' fins with the corresponding earbuds, the ‘fins’ should hook into the front
part of your ear as shown in the illustration.
IMPORTANT: Make sure that the cushion is firmly seated on the tube so that the
cushion does not remain in your ear canal when you remove the ear buds.
1
1. Switching Your Ear Buds On and Off
L
4
iB72-051115-C (EN)
Printed in China