Transcript
www.4-Max.co.uk High Power LED Headlight System User Manual Thank you for purchasing this lighting system. It incorporates 2 high power super bright LED's and reflectors. They are very efficient and only consume 0.5A. The lights can be turned on and off via a spare channel on your receiver. These lights are suitable for R/C aircraft, cars or boats. 【Basic Data】 1. LED Housing diameter: 22mm 2. LED Housing depth: 21mm 3. JST-XH (2S) wire length: 180mm 4. Control/receiver wire length: 300mm 5. Control to LED wire length: 200mm 【Product Features】 1. Power is supplied via the JST-XH balance connector of a 2S LiPo battery 2. JST-XH balance connector input voltage range: 6.5V - 8.4V DC 3. Can be turned on and off via a spare channel on your receiver/transmitter 4. Control voltage input from receiver: 5.0V DC Max 【Product Diagram】 2S JST-XH Connector Control Circuit LED's Receiver Connector 【Cautions】 • Please read this operating manual carefully before installing and using this product • Do not use the voltages beyond the above stated maximum voltages • Do not use this product in the rain and/or damp conditions to avoid damaging the product • Please keep this User Manual for future reference 4-Max does not accept any liability whatsoever with regards to any injury or damage caused by advice contained within or not contained within this user manual. www.4-Max.co.uk April 2013 Rev1.
