Transcript
Caution: To ensure correct and safe use of the products, make sure that you also read the Operating Instructions on DVD carefully prior to operation. standard V-AMP Set Up Brain Products GmbH Phone +49 (0) 8105 733 84 0 [email protected] www.brainproducts.com 2 professional Installing the amplifier (V-Amp): Use the USB cable to connect the amplifier to your computer. Windows will detect the new hardware and install it automatically. Follow the instructions. + professional Installing the software: Insert the Brain Products Application Suite and install the Recorder and Analyzer 2 as described in the User Manual. Important: Leave the DVD in the drive while installing the hardware. The readme file contains important information about software installation. RECORDER Installing the dongle: Plug in the USB dongle. Windows will install the driver automatically. Follow the instructions. When installation is complete, the dongle will light up. USB Trigger 2 Trigger 1 Connecting the electrodes: Connect EasyCap electrodes and our sensors for peripheral signals to the front panel. Important: Make sure your cap connector fits the pinout of your amplifier. Refer to the manual. V-Amp 16 1 16 2 15 3 14 4 13 5 12 6 7 8 9 10 11 Version 004 01/2014 © Brain Products GmbH