Download Master Node Service Manual

A+ SERVER 2022G-URF User's Manual
PCI/PnP Configuration
Clear NVRAM
Select Yes to clear NVRAM during boot-up. The options are Yes and No.
Plug & Play O/S
Select Yes to allow the OS to configure Plug & Play devices. (This is not required
for system boot if your system has an OS that supports Plug & Play.) Select No
to allow AMIBIOS to configure all devices in the system.
PCI Latency Timer
This option sets the latency of all PCI devices on the PCI bus. Select a value
to set the PCI latency in PCI clock cycles. Options are 32, 64, 96, 128, 160,
192, 224 and 248.
ROM Scan Ordering
This setting determines which kind of option ROM activates prior to another.
Options include Onboard First and Addon First.
SXB1 Slot/SXB2 Slot
These settings Enable or Disable the specified PCI slot in your system.
Onboard LAN Option ROM Select
This setting allows you to select the onboard LAN option ROM for iSCSI or
PXE.
Load Onboard LAN 1 Option ROM
This option allows you to Enable or Disable the onboard LAN 1 option ROM.
Load Onboard LAN 2 Option ROM
This option allows you to Enable or Disable the onboard LAN 2 option ROM.
Primary Video Controller
This option specifies the primary video controller for Onboard VGA or Other.
7-8