Download SPRING OFFERS - Alba Diagnostics Ltd

[email protected] | www.albadiagnostics.com
SPRING OFFERS
INNOVATIVE
April - May 2015
WORKSHOP SOLUTIONS
TURBO TESTER
Part No. ALB40219
• Pressure test kit for testing Turbo System Pressure
& identifying leaks within the system
• Set of 8x system connectors: 4 x test & 4x closed adaptors
• Diameter range - 55mm - 94mm
•Connectors have rough surface to allow for better grip
within turbo hose end
• Use with any standard pressure pump from the Alba
Pressure Testing range or can be connected direct to
compressed air system with a suitable pressure regulator
£82.50
List £135.00
ELECTRIC PRESSURE TESTER
Part No. ALB30924
£195.00
• Can be used with both ALB40218 & ALB40219 to help diagnose leaks faster & easier
List £240.00
COMMERCIAL VEHICLE COOLING SYSTEM PRESSURE TESTER
Part No. ALB40218
• Pressure test kit for testing Cooling System Pressures
• Aluminium System Connector Caps 7x with Quick Connectors
• Aluminium Pressure Pump c/w Connecting Hose & Pressure Relief Valve
• Applications include ; DAF, Deutz, ERF, Iveco, MAN, Mercedes, Renault, Scania, Volvo,
full list available at www.albadiagnostics.com
£85.80
List £140.00
BEARING PRESS BUSH REMOVAL KIT
Part No. ALB40224PK
In Use
A workshop kit of Bush Removal Sleeves & Press Support Block
for use on Workshop Press
Bearing Press Support - ALB40097
• Press bearings easily on a variety of different suspension arms
• The three point contact will guarantee a perfect, safe support
Bush Sleeve Kit - ALB40224
• Universal set of sleeves for removing & installing bushes, bearings etc
• For use in conjunction with Bearing Press Support block and Workshop Press
• Standard universal applications: Car, HGV, LCV
• 20 Bush Sleeves – ID range: 34.5 - 72.5mm, OD Range: 43.5 - 82.5mm
• Adaptor plate for use with Press Block
£249.00
List £399.00
Terms & Conditions
All prices subject to VAT unless otherwise stated. All offers are subject to
availability & while stocks last. All pictures shown are for illustration purposes
only. Whilst every possible care has been taken to ensure the information within
this brochure was accurate at the time of going to print, Alba Diagnostics
cannot accept any liability for any possible errors. Orders must be received in
writing via email: [email protected] or by fax: 01592 774777
Offers last until Friday 29th May 2015.
Distributor Stamp
INNOVATIVE
WORKSHOP SOLUTIONS
HEAVY DUTY PNUMATIC SUSPENSION WORKSTATION KITS
• Auto levelling upper arms allows the machine to work easily on both conical & misaligned springs
• Cylinder made from light alloy & nylon resin with fiberglass to avoiding corrosion & oxidation
• Safety cage fitted with safety valve system
• Foot-pedal works only when the safety valve is closed
• Supplied with small (78 -130mm) & large (125 - 205mm) jaws
• Includes strut-vice, to hold struts of variable lengths
• Working pressure: min 6 bar - max 10 bar
• Cylinder stroke: 330 mm
• Ideal for working on conical, side-load & heavy duty springs
• Made in Europe: CE approved
KITS INCLUDE
SHOCK ABSORBER MASTER TOOL SET
ALB30956
MERCEDES SET
ALB40175
• Jaws for C & E Class
HEAVY DUTY SUSPENSION WORKSTATION (2 TONNE)
Part No. ALB40170KIT2
Also Available without
• Compression force: 1960Kg@ 10 BAR
• Machine dimensions: 140cm high, 52cm wide, 30cm deep
ALB30956
£1495.00
£1375.00
Part No. ALB40170KIT1
List £1795.00
List £1955.00
EXTRA-HEAVY DUTY SUSPENSION WORKSTATION (2.5 TONNE)
Part No. ALB40180KIT2
Also Available without
• Compression force: 2450Kg@ 10 BAR
• Machine dimensions: 160cm high, 52cm wide, 30cm deep
ALB30956
£1695.00
£1575.00
List £2214.00
Part No. ALB40180KIT1
List £1995.00
MECHANICAL HEAVY DUTY SUSPENSION WORKSTATION
Part No. ALB40255
Mechanical (ie non-pneumatic) version of Heavy Duty Suspension Workstation
• Impact Wrench Operation (not supplied)
• 19mm Hex Drive for use with Impact Wrench, or standard hand socket/wrench
• Auto levelling upper arms; works easily on both conical & misaligned springs
• Safety guard fitted
• Supplied with strut-vice, to hold struts of variable lengths
• Works on conical, side-load & heavy duty springs
• Compression force: 1600Kg
• Machine dimensions: 140cm high, 54cm wide, 31cm deep
• Made in Europe: CE approved
£795.00
2
[email protected] | www.albadiagnostics.com
INNOVATIVE
WORKSHOP SOLUTIONS
DELUXE COOLING SYSTEM & CAP
PRESSURE TESTER
EGR VALVE TESTER & CLEANER
Part No. ALB40165
• Unique inflatable bladder sealing system provides universal coverage for cars
& light commercials – no individual adaptors required
• Suitable for system neck diameters up to 60mm
• Locate leaks from: Head Gaskets, Radiator & Heater cores, Water Pumps &
Hoses, Core Plugs & Engine Blocks
• Cap Pressure Testing:
- 6 unique double-ended
adaptors for testing the
most common automotive
pressure caps
• Tests integrity of EGR valves & other 12v solenoids & helps the
cleaning process for carbonised EGR valves
• Variable frequency allows EGR valves to be cycled in low-frequency
mode & 12v operated for portability
• In high frequency mode, the valve can be
opened progressively, allowing more
efficient manual cleaning
• Also used to test a variety of other
12v solenoid type valves; vacuum
solenoids, boost pressure control
valves & actuators, etc
£145.00
£199.00
SOUNDSONIC
COMBO CHASSIS & ENGINE EAR
• Professional diagnostic tool using non-intrusive ultrasound to inspect
• Listen to 6 under chassis locations at one time – all in one
road test
• Hear noises that cannot be duplicated in the workshop
• Improves workshop efficiency, revenues, customer
satisfaction and saves time
• Contains; headphones, control unit, noise wand, & 6 pick-ups
Part No. ALB70889
List £249.00
List £225.00
Part No. ALB30670
Part No. ALB30508A
& isolate difficult to find sounds non-audible to the human ear
• Sound is converted to audible level & LED bargraph indicates
intensity & direction of sound
• Not affected by ambient noise – eg radios,
voices, wind, traffic noise etc
• Contains; transmitter & receiver,
headphones, aluminium contact probe,
aluminium air/acoustic probe,
user manual & storage case
£99.00
£269.00
List £141.41
List £420.70
MOBILE TOOLS CABINET 3 DRAWER GLOW PLUG TESTER MULTI-VOLTAGE
Part No. ALB40016MT
• Internal drawer locking mechanism
• Ball bearing slides
• Internal rubber drawer liners
• Non-slip rubber top mat
• 2 static wheels /2 locking wheels
• Dimensions: 690 x 460 x 73
Part No. ALB30913
• Works on all types of glow plugs - any voltage:
4.4v/5v/7v/8.5v/10v/ 11v, plus many more
• Displays open & short circuit
• Measures actual glow plug resistance
to evaluate plug
• Internal 9 volt battery & Low warning
indicator
• Auto shut-off when not being used
• Protected with oil-resistant
rubber boot
ALB40073 Magnetic Parts Tray
£79.95
£249.00
List £128.75
List £295.00
Tools Not Included
[email protected] | www.albadiagnostics.com
3
INNOVATIVE
WORKSHOP SOLUTIONS
PRESSURE BRAKE BLEEDER
BRAKE PIPE FLARING TOOL
UK’s Top Selling Pressure Brake Bleeder
• Full fluid change in approx. 15 minutes by a single operator
• Portable: operates off 12V supply (vehicle battery)
• Capacity 1.25ltrs
• Suitable for clutch bleed as well as brake bleed
• Supplied with Euro Cap & Bleed Bottle
• Use with a workshop bench vice
• Convex & Double Lap flares to SAE & DIN
• Dial-a-size turret design for ease of use
• Lever cam action; quick flaring
• Automatic punch extraction from flare
• Screw clamp for accurate die alignment
• 4.75mm & 3/16”
£285.00
£135.00
BRAKE BLEED WRENCH SET
VERNIER CALIPER C/W DISC
MEASURING ADAPTOR
Part No. ALB560AB
List £330.00
List £156.00
Part No. ALB40207
• Set of special socket wrenches for loosening & tightening
bleed nipples
• 8, 10 & 11mm to cover all popular applications
• Silicon hose (1.2mtrs) with safety check valve
• Ideal for brake bleeding without removing the wheels
£45.00
List £69.95
TROLLEY & STORAGE CONTAINER
Part No. ALB30952PC
• Push handle moulded into top shelf
• 4" Brake Wheels x2
• 4" Moveable Wheels x2
• Will not scratch car finish
• Dimension 575x460x900mm
• Self assembly
• 12 x Clear Plastic Internal
Compartments – three different sizes
• Storage compartments can be
attached to belts, straps etc
List £101.06
4
Part No. ALB40158
• ALB30598 Digital Vernier Caliper 0 - 150mm, with ALB40157
Brake Disc Measuring Tool
• Measures thickness of brake disc without having to remove
the wheel
• Packaging: sturdy plastic case
£45.00
List £59.95
£67.50
Part No. ALB30915
PISTON WINDBACK 35PCS
ADAPTOR KIT
Part No. ALB30844KIT
• Set of 30x popular rewind adaptors, 5x common types of reaction
Plate & Air Operated Piston Rewind Tool (ALB30843)
• Suitable for use on most European & Japanese cars
• Uses normal workshop compressed
air supply (90psi)
£110.00
List £181.17
[email protected] | www.albadiagnostics.com